OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [rtl/] [verilog/] [minsoc_top.v] - Rev 48

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
33 Start-up Starter, included in the MinSoC top file, has been updated to three-phase instruction output; instruction assertion, acknowledge assertion, and next instruction with acknowledge deassertion.

Previously it was two-phase with next instruction, instruction assertion and acknowledge assertion together, and acknowledge deassertion.

That is required by the new Wishbone master interface used by OpenRISC release 3.
rfajardo 4920d 21h /minsoc/trunk/rtl/verilog/minsoc_top.v
31 Adaption to or1200_r3. It is still important to change or1200_defines.v:
-`define OR1200_BOOT_ADR 32'hf0000100 to `define OR1200_BOOT_ADR 32'h00000100
rfajardo 4990d 02h /minsoc/trunk/rtl/verilog/minsoc_top.v
26 On version 34 of the Advanced Debug System the signal debug_tdo_o from the altera_virtual_jtag has changed to debug_tdo_i.

This commit adapts minsoc_top.v accordingly.
rfajardo 5100d 09h /minsoc/trunk/rtl/verilog/minsoc_top.v
20 minsoc_defines.v had a semicolon at the end of the two reset polarity definitions.

minsoc_top had a signal array for two different signals which was for backward compatibility. The compatible debugging module is so old that there is no reason for keeping it.

Documentation has been updated to better explain how to use the definitions files, minsoc_defines.v and or1200_defines.v. An example for Altera devices has been added too.
rfajardo 5179d 20h /minsoc/trunk/rtl/verilog/minsoc_top.v
17 Ethernet testbench speed penalty solved. Now Ethernet of testbench and minsoc can be enabled by only uncommenting `define ETHERNET on minsoc_defines.v.

send_mac, get_mac and uart_send tasks have been included/improved. Also a testbench, which works for both included firmwares is added. (eth and uart)

If ETHERNET is defined for the SoC, both firmwares will complete successfully. If not, the eth firmware will stall when trying to access the Ethernet module.
rfajardo 5244d 20h /minsoc/trunk/rtl/verilog/minsoc_top.v
16 Further initialization improvement of non-used signals, setting interrupt signals to 0 if module is not used. rfajardo 5249d 23h /minsoc/trunk/rtl/verilog/minsoc_top.v
14 Wishbone error signal of Ethernet core was not tied to ground if Ethernet was disabled. Solved now. rfajardo 5259d 00h /minsoc/trunk/rtl/verilog/minsoc_top.v
7 Some changes:
-wb_cabs removed from minsoc_top.v and minsoc_tc_top.v
-added reset polarity control to minsoc_defines.v through:
-POSITIVE_RESET
-NEGATIVE_RESET
-minsoc_onchip_ram_top.v does not use
minsoc_onchip_ram.v oe signals (output enable) anymore,
which are implemented as tristate buffers. Now
minsoc_onchip_ram_top.v has a generated MUX, which
has an arbitrary number of inputs and 1 output.
Input are the internal output of the onchip_rams,
output the wb_dat_o.
rfajardo 5290d 18h /minsoc/trunk/rtl/verilog/minsoc_top.v
2 First commit of project. Beta status:
-testbench: working
-firmware: working
-RTL: Working for: Xilinx Spartan-3A DSP Development Kit
rfajardo 5304d 23h /minsoc/trunk/rtl/verilog/minsoc_top.v

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.