| Rev |
Log message |
Author |
Age |
Path |
| 170 |
Changed all links to minsoc.com/dep/trunk/ to solve the issues caused by sourceforge.com. |
ConX. |
4377d 12h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 168 |
Installation script has an option for advanced or resumed installation.
Advanced mode:
the script only downloads and installs the required tools. Dependency libraries and tools are checked during individual tool compilation. Furthermore, the install directory is not added to the system PATH. You have to do it yourself. Libusb, libftdi and Icarus Verilog are supposed to be installed by the user.
Resumed mode:
the script checks if the dependency libraries and tools are installed before doing anything. It also adds the installation directory to the system PATH variable for bash shells on HOME/.bashrc. Libusb, libftdi and Icarus Verilog are automatically installed for you.
Non standard configuration scripts that require or1200_defines.v to be tweaked will ask before doing so and backup the correspondent files. |
rfajardo |
4561d 15h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 167 |
Ruben Diez fix to installation script problem in Windows:
minsoc-install.sh breaks if there are spaces in the PATH, which is rather common under Cygwin, as most Windows PCs have something like "C:\Program Files" in there. |
rfajardo |
4595d 18h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 166 |
Turning on warnings for genera_bench.
Updating minsoc-install.sh to work better with directories and working around a missing inclusion of libftdi autotools. http://opencores.org/forum,OpenRISC,0,4685,1 |
rfajardo |
4609d 17h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 161 |
Correcting configure parameters of adv_jtag_bridge on installation script. |
rfajardo |
4716d 15h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 160 |
Typo in minsoc-install.sh script. Adv_jtag_bridge was not configuring correctly. |
rfajardo |
4716d 15h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 158 |
Adding de2_115_board port, thanks to Richard Hasha.
Support to JSP (JTAG Serial Port) working well. Also provided by Richard Hasha.
Different interconnect configurations per board are not straightforward on MinSoC. New added modules or definitions for addresses have to be carried over to other boards. Furthermore, extra modules can be shared among all projects. Thus, it is better to have this centralized:
-Removing interconnect configuration from minsoc_defines.v. There is an interconnect_defines.v file on rtl/verilog. The software counterpart is interconnect.h on sw/drivers.
Including a jsp firmware. It is basically the uart firmware but using JSP instead. Added to all board configure scripts to be compiled on configuration.
prj/srcs extended to include jsp and interconnec_defines.v.
spartan3e_starter_kit_eth lost UART (does not fit) and uses JSP instead now. |
rfajardo |
4718d 08h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 154 |
Modified to use the new autotools support in the advanced debug system v3.0. |
nyawn |
4724d 03h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 149 |
Merging differences of release candidate 1.0 revision 140:148 with trunk. |
rfajardo |
4756d 17h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 141 |
Merging with rc-1.0 revision 140. I doubt rc-1.0 will still change much in the last days. |
rfajardo |
4762d 17h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 135 |
Installation on Ubuntu-11.10 has shown that package texinfo is required to compiled GDB. This package installs the binary makeinfo. |
rfajardo |
4770d 12h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 106 |
Installation script was checking the ENV variable before setting it. |
rfajardo |
4789d 16h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 103 |
But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. |
rfajardo |
4799d 08h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 102 |
GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. |
rfajardo |
4799d 08h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 83 |
minsoc-install.sh: bzip2 program was being used, but its existance on target system was not being verified. It is now. |
rfajardo |
4851d 18h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 82 |
minsoc-install.sh: problems with copying the GNU Toolchain from download to tools. We uncompress the GNU Toolchain now once again to tools during the installation part. |
rfajardo |
4854d 17h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 81 |
Installation script complete, nice text feedback, output logs and better execution order. |
rfajardo |
4855d 04h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 79 |
minsoc-install.sh: rpath corrected.
required-cygwin-tools: updated |
rfajardo |
4858d 09h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 78 |
minsoc-install.sh: Advanced JTAG bridge compilation needs to know where the dynamic libraries are on runtime. Patching (sed) the Makefile to compile it with the rpath to the libraries (libusb/libftdi). |
rfajardo |
4858d 09h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
| 77 |
New tool requirements for installing Icarus Verilog. |
rfajardo |
4858d 10h |
/minsoc/trunk/utils/setup/minsoc-install.sh |
