OpenCores
URL https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] - Rev 296

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
296 Removed parallel interface from o8_vector_rx.vhd, modified vector_tx.vhd to use a generic for it's seed value, slight formatting change on o8_elapsed_usec.vhd. jshamlet 1145d 22h /open8_urisc/trunk/
295 Undoing previous revision. UART was fine, bug reporter was not. jshamlet 1149d 01h /open8_urisc/trunk/
294 Fixed an ancient bug in the parity logic that had the parity inverted. jshamlet 1149d 06h /open8_urisc/trunk/
293 Fixed formatting issue in o8_sync_serial where tabs were inserted instead of spaces and fixed column spacing as a result (purely cosmetic) jshamlet 1168d 06h /open8_urisc/trunk/
292 Updated the o8_trig_delay entity by:
1) Added a global interrupt enable,
2) Added the ability to trigger on both the pre- and post-arm trigger input
3) Added the ability to read the external input on offset 7
jshamlet 1239d 06h /open8_urisc/trunk/
291 Added Notepad++ language definition file for the Open8_II ISA jshamlet 1281d 20h /open8_urisc/trunk/
290 Added an additional generic "Rotation_Ignores_Carry" that removes the carry logic from the ROL/ROR instructions such that they now rotate 'normally',
Added an alias for PSR_GP4 named PSR_S, as it is now used to switch the function of the RSP instruction. The internal opcode hasn't changed, but it allows assembly code to use PSR_S or BRS/BNS when performing RSP related operations.
jshamlet 1281d 20h /open8_urisc/trunk/
289 Added back the delay for the cursor home command, since it is slow on most Hitachi compatible LCD panels. jshamlet 1299d 07h /open8_urisc/trunk/
288 Removed hard-wired R/Wn output and replaced it with a note that the R/Wn line must be tied low either in firmware or on the board. jshamlet 1300d 03h /open8_urisc/trunk/
287 Fixed mangled comments and revisioning dates. jshamlet 1301d 02h /open8_urisc/trunk/
286 Added initial cut of a "universal" character LCD driver. Allows for adjustment of address setup, enable high, and cycle times. Also has built-in timers for handling timing on certain commands. jshamlet 1301d 02h /open8_urisc/trunk/
285 Added checksum byte to vector tx/rx to avoid issues with serial line noise glitching the receiver. Also modified the transmitted to take any generic argument, rather than canned arguments. jshamlet 1308d 05h /open8_urisc/trunk/
284 Corrected the vhdl unit name and description for o8_7seg.vhd jshamlet 1421d 17h /open8_urisc/trunk/
283 Altered SDLC bitclock check on TX to NOT block when tested by software, but to instead ignore packet write requests if BClk_Okay is low. This allows software to continue checking BClk_Okay in a polling loop. jshamlet 1425d 04h /open8_urisc/trunk/
282 Modified the SDLC core transmit states to have consistent naming. jshamlet 1425d 04h /open8_urisc/trunk/
281 Added pre-initialization to the dual-port RAM signals. jshamlet 1425d 07h /open8_urisc/trunk/
280 Got rid of silly aliases that connected the dual-port memory and the arbitration logic. jshamlet 1425d 08h /open8_urisc/trunk/
279 More comment cleanup jshamlet 1426d 05h /open8_urisc/trunk/
278 Flattened the SDLC interface to fewer files and eliminated the package file. jshamlet 1426d 23h /open8_urisc/trunk/
277 Fixed documentation errors related to flags. The UPP ALU instruction only alters the C flag, not the Z or N flags. This implies that using indexed loads or stores with auto post-increment will potentially alter the C flag. jshamlet 1427d 05h /open8_urisc/trunk/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.