| Rev |
Log message |
Author |
Age |
Path |
| 192 |
Added SDLC packet engine |
jshamlet |
1810d 11h |
/ |
| 191 |
Cleaned up comments, added back the OPEN8_NULLBUS constant, and added some new modules for ADCs and LCD displays.
Also made the button input module more configurable by moving the debounce code to a separate entity and using generics to instantiate it. |
jshamlet |
1810d 11h |
/ |
| 190 |
Fixed a bug in CPU where RTI/RTS wasn't idling the instruction cache, causing intermittent failures where RTI would execute as RTS, corrupting the stack;
Fixed a bug in the real-time clock where the uSec tick generator would stop if the PIT timer value was left/set to 0x00. |
jshamlet |
1822d 09h |
/ |
| 189 |
Merged changes from private repository,
added ceil_log2 function to Open8_pkg, since it is used to calculate RAM vectors,
cleaned up comments and removed local copies of the ceil_log2 function from peripherals. |
jshamlet |
1823d 09h |
/ |
| 188 |
Added a generic to alter the behavior of RTI so that it can optionally skip restoring the general purpose flags GP4 to GP7, allowing ISR's to make persistent changes to them. Also exported these flags to the top level for use outside the CPU. |
jshamlet |
1823d 12h |
/ |
| 187 |
Added the CPU_Halt input, only now as an input to the instruction decoder. The CPU_Halt line will assert the registered CPU_Halt_Req, which will cause the instruction decoder to abort the current instruction, reset the PC, then enter a hold state until the line is deasserted. Additionally, a very minor bug that could cause the SMSK instruction to effectively execute twice if interrupted was fixed. Lastly, cleaned up the comments even more. |
jshamlet |
1825d 08h |
/ |
| 186 |
Merged the interrupt override logic into the case structure, simplifying how interrupts are processed. |
jshamlet |
1828d 08h |
/ |
| 185 |
1) Fixed an apparently long-standing bug where the interrupt bit wasn't being cleared after an RTI
2) Modified the program counter logic to be simpler. It now always increments, and states control the increment using the offset field. A new set of constants was added to replace the old states.
3) Modified the ALU to always use Operand1 instead of ALU_Ctrl.Data (and removed the field in the record). A new ALU command, ALU_GMSK, was added, as it was the only instruction to set the .Data field to something other than Operand1 (Int_Mask)
4) Modified the package file so that flag names match what the assembler calls them. FL_Z is now PSR_Z, FL_GP1 is now PSR_GP4, etc.
5) Cleaned up the comments and code formatting |
jshamlet |
1828d 11h |
/ |
| 184 |
More file/entity renaming to match private versions. |
jshamlet |
1830d 11h |
/ |
| 183 |
Renamed core to o8_cpu to match new naming scheme |
jshamlet |
1830d 11h |
/ |
| 182 |
Simplified the address generation logic at the expense of making LDX take one additional clock cycle. This allowed the address logic to be split out of the main state machine and simplified (greatly). During this process, a bug in SDO was found and fixed that caused it to return through the wrong pipe fill state wnen auto increment was disabled. |
jshamlet |
1830d 11h |
/ |
| 181 |
Altered the RSP instruction to allow the stack pointed to either be restored from registers or stored to registers based on the status of a processor bit. Also modified LDX to simplify the address logic. |
jshamlet |
1831d 08h |
/ |
| 180 |
Added additional Open8 compatible modules |
jshamlet |
1835d 11h |
/ |
| 179 |
Replacing files accidentally deleted during check-in |
jshamlet |
1845d 07h |
/ |
| 178 |
Adding Open8 toolset for pure assembly |
jshamlet |
1845d 07h |
/ |
| 177 |
Fixed comments in RTC module |
jshamlet |
3155d 12h |
/ |
| 176 |
Fixed documentation errors,
Modified uSec_Tick such that it is always generated regardless of the interval. |
jshamlet |
3160d 09h |
/ |
| 175 |
Added 4 and 8-bit LCD interfaces with backlight and contrast DACs |
jshamlet |
3160d 14h |
/ |
| 174 |
Added ROM/RAM wrappers |
jshamlet |
3355d 09h |
/ |
| 173 |
Added a couple of useful interfaces for detecting button presses and clock changes. |
jshamlet |
3355d 09h |
/ |
| 172 |
General code cleanup |
jshamlet |
3355d 09h |
/ |
| 171 |
Fixed comments for offsets 0x0 - 0x3 to indicate the read value |
jshamlet |
3355d 09h |
/ |
| 170 |
Added 24-bit resolution epoch timer / alarm clock |
jshamlet |
3355d 09h |
/ |
| 169 |
Corrected issue with CMP and SBC generating an inverted carry flag and added new constants to the package file to simplify interfacing new modules. |
jshamlet |
3410d 10h |
/ |
| 168 |
Simplified write data path logic,
Converted RTC to packed BCD,
Corrected several bugs in real time clock component, |
jshamlet |
4189d 06h |
/ |
| 167 |
Updated CPU model; Pipelined ALU control signals to improve fMAX, corrected issue with interrupt controller priority not being obeyed, fixed bug in auto-indexing instructions where the upper register wasn't being properly incremented, cleaned up code to make the processor model easier to follow.
Added several useful modules that use the Open8 bus. |
jshamlet |
4197d 04h |
/ |
| 166 |
fixed additional issues with range checking on PCREL relocations for open8, added test cases to verify, catch tree up with binutils datestamp 20120301 |
khays |
4761d 06h |
/ |
| 165 |
fixed issues with PC relative fixups in the linker |
khays |
4762d 13h |
/ |
| 164 |
Modified the data path to allow the bus to go idle while waiting for an interrupt. This makes it easier to debug code that uses the WAI instruction, as both Wr_Enable and Rd_Enable go low. |
jshamlet |
4833d 00h |
/ |
| 163 |
sync with binutils 2.22.51.20111114 |
khays |
4870d 12h |
/ |
