Rev |
Log message |
Author |
Age |
Path |
866 |
orpsocv2: correct build/par issue on Atlys board
From patch submission e-mail:
The first of the series is an issue that has been around since the
beginning (at least based on the svn log files) and traces its root to the
first Xilinx board supported by orpsocv2, the ML501. Apparently Makefile
for the final place-and-route process in all the builds contains a typo
which leads to the routing tool not using any timing constraint at all.
Patch by: Jason Zheng <jxzheng@gmail.com> |
stekern |
3881d 12h |
/openrisc/trunk/orpsocv2/boards/ |
854 |
Add OR1200_OR32_LWS define to board specific or1200_defines.v |
stekern |
4385d 13h |
/openrisc/trunk/orpsocv2/boards/ |
677 |
atlys: add 2-clock synchronizer chain for ddr2_calib_done
The signal ddr2_calib_done signal comes from the ddr2 clock domain,
while wb_req is treating it as if it came from wb_clk domain. As a
result the timing analysis tool assumed a worst case scenario of 5ns
between the two domains and the results were miserable.
While we can argue that this is a multi-cycle path, the fact is that
ddr2_calib_done feeds into multiple logic sinks and can potentially
cause meta-stability issue in the design. The solution is to add a
2-clock meta-stability filter to address both the timing problems and
the meta-stability concern.
Signed-off-by: Jason Zheng <jxzheng@gmail.com>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Acked-by: Olof Kindgren <olof.kindgren@orsoc.se> |
stekern |
4672d 02h |
/openrisc/trunk/orpsocv2/boards/ |
655 |
ORPSoC: add CFI flash controller to ml501, sw driver, tests, app, documentation |
julius |
4793d 21h |
/openrisc/trunk/orpsocv2/boards/ |
652 |
Fix make compile.tcl for actel backend |
yannv |
4802d 04h |
/openrisc/trunk/orpsocv2/boards/ |
638 |
orpsoc: xilinx: use XILINX env variable
instead of rely on custom environment variables,
use the XILINX variable and instruct the user how to
source the scripts that set it.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4848d 14h |
/openrisc/trunk/orpsocv2/boards/ |
634 |
orpsoc: atlys: autoregenerate coregen cores
Instead of keeping binary .ngc files of the coregen
generated cores, use coregen to generate them from the .xco
and .cgp file |
stekern |
4853d 14h |
/openrisc/trunk/orpsocv2/boards/ |
633 |
orpsoc: add Digilent Atlys spartan6 board README
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4853d 14h |
/openrisc/trunk/orpsocv2/boards/ |
632 |
orpsoc: add Digilent Atlys spartan6 board sw include file
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4853d 14h |
/openrisc/trunk/orpsocv2/boards/ |
631 |
orpsoc: add Digilent Atlys spartan6 board testbench
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4853d 14h |
/openrisc/trunk/orpsocv2/boards/ |
630 |
orpsoc: add Digilent Atlys spartan6 board backend
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4853d 14h |
/openrisc/trunk/orpsocv2/boards/ |
629 |
orpsoc: add Digilent Atlys spartan6 board or1ksim configuration
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4853d 14h |
/openrisc/trunk/orpsocv2/boards/ |
628 |
orpsoc: add Digilent Atlys spartan6 board Makefiles
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4853d 14h |
/openrisc/trunk/orpsocv2/boards/ |
627 |
orpsoc: add Digilent Atlys spartan6 board rtl
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4853d 14h |
/openrisc/trunk/orpsocv2/boards/ |
568 |
OPRSoC - adding Xilinx Xtreme DSP Spartan-3A 1800A board port and documentation |
julius |
4906d 07h |
/openrisc/trunk/orpsocv2/boards/ |
563 |
Search for external cores in <board>/modules path |
olof |
4918d 20h |
/openrisc/trunk/orpsocv2/boards/ |
560 |
ORPSoC update - update make scripts, XILINX_PATH setup changes.
Note - may require a change to XILINX_PATH on user systems. |
julius |
4926d 19h |
/openrisc/trunk/orpsocv2/boards/ |
544 |
ORPSoC ordb1a3pe1500 update - adding SD card controller. |
julius |
4944d 08h |
/openrisc/trunk/orpsocv2/boards/ |
542 |
ORPSoC scripts cleanup. Now centralised.
Documentation updated for ml501's SPI programming, noting issues with ISE12. |
julius |
4949d 22h |
/openrisc/trunk/orpsocv2/boards/ |
530 |
ORPSoC update
Ethernet MAC Wishbone interface fixes
Beginnings of software update.
ML501 backend script fixes for new ISE |
julius |
4973d 08h |
/openrisc/trunk/orpsocv2/boards/ |