Rev |
Log message |
Author |
Age |
Path |
36 |
Many updates to the SPEC, although it's still by no means complete. |
dgisselq |
2901d 20h |
/ |
35 |
Minor updates and tweaks, primarily fixing the none_sel signal when the
RTC, scope, or ICAPE interface are not present. |
dgisselq |
2901d 20h |
/ |
34 |
Adjusted this so that the "*.c" files are now archived. Also, I didn't
need archiving of python files, so that extension was removed as well. |
dgisselq |
2901d 20h |
/ |
33 |
Adjusted the defaults, so that more values have defined default values. |
dgisselq |
2901d 21h |
/ |
32 |
Removed an undefined value from o_lcd[2] setting. |
dgisselq |
2901d 21h |
/ |
31 |
Fixed a bug caught by Verilator. |
dgisselq |
2901d 21h |
/ |
30 |
Brings the CPU up to date with the rest of the ZipCPU distribution. |
dgisselq |
2901d 21h |
/ |
29 |
A first capability for setting time, dawn, and dusk values using the keypad.
At this point, I now have a minimal capability for actually accomplishing
the entire task. It's not very robust, but if you get lucky it'll work. |
dgisselq |
2901d 21h |
/ |
28 |
Fixed a small lint bug associated with the scope vs the compressed scope. |
dgisselq |
2906d 07h |
/ |
27 |
Added a bootloader capability so that pieces of the program may be immediately
loaded into RAM. Further, the custom linker script, cmodram.ld, has been
added to dispatch object files to either FLASH or RAM. Finally, for those
items that were headed to RAM, their support files have been split between
RAM and FLASH code: kernel.c/ksetup.c, syspipe.c/pipesetup.c, etc. |
dgisselq |
2906d 08h |
/ |
26 |
Modified to be able to handle different load from virtual addresses. This
enables the bootloader capability. |
dgisselq |
2906d 08h |
/ |
25 |
Converted timer B to be a non-reloadable watchdog timer. |
dgisselq |
2906d 08h |
/ |
24 |
Made the ziptimer autoreload feature a parameter (dis)abled option. |
dgisselq |
2906d 08h |
/ |
23 |
Fixed a bug which caused every instruction to be loaded/prefetched twice. |
dgisselq |
2906d 08h |
/ |
22 |
Initial version of the ZipOS operating system construct(s). |
dgisselq |
2910d 06h |
/ |
21 |
Adds two device drivers: one for the SPI display, and another for the pseudo
device that simulates the Real-Time Clock. |
dgisselq |
2910d 07h |
/ |
20 |
This linker description file acknowledges a .fixdata section which can be
used for debug data upon startup. This allows a startup function to write
all registers out, without destroying them or modifying them on the way. |
dgisselq |
2910d 07h |
/ |
19 |
Addition of dumpuart.cpp to dump the UART transactions to a FILE (method of
debugging the board). FLASHDRVR and ZIPLOAD were also updated to handle
loading ELF files where the code is longer than a single block. |
dgisselq |
2910d 07h |
/ |
18 |
Added a picture of the device pinouts to the specification. |
dgisselq |
2910d 07h |
/ |
17 |
Modifications necessary to find some bugs, and to load the flash with an ELF
file. |
dgisselq |
2910d 07h |
/ |
16 |
Bug fix. This release fixes several bugs associated with transitioning from
user mode to supervisor mode while running from flash memory. This also
rewires TIMER-B into a watch-dog timer, and adjusts the LED's to be an
indicator of interrupts and whether or not the CPU has stalled or not as well. |
dgisselq |
2910d 07h |
/ |
15 |
Adds a new program and a new device: doorbell2 and the PmodCLS display. This
also includes a real-time clock simulator--since we couldn't fit it on the
board. |
dgisselq |
2916d 00h |
/ |
14 |
Modified the loader so that it will load even if there are RAM variables
in the load, just as long as they aren't anything but zero. (The startup code,
however, doesn't clear memory to match--so be sure to initialize all variables.) |
dgisselq |
2916d 00h |
/ |
13 |
Fixed a nasty parameter problem between toplevel and txuart. The UART
transmitter now both works (again), and properly generates the required
interrupts. This also finishes the fixes to the alternate toplevel file,
alttop.v, that should've been fixed in the last release. |
dgisselq |
2916d 01h |
/ |
12 |
The UART and PWM audio now work. This includes the changes to make that
happen, as well as the source code for some UART and PWM demo programs. |
dgisselq |
2916d 22h |
/ |
11 |
Runs on hardware now! Added proper pinouts, pipelined wishbone command
interface sufficient for loading the flash, a loader to load the flash,
and verified that they work. |
dgisselq |
2917d 20h |
/ |
10 |
Added the capability to run ELF files natively, fully processing the ELF format. |
dgisselq |
2917d 20h |
/ |
9 |
Added pinout diagrams, based upon a (hopefully) final UCF file. |
dgisselq |
2917d 20h |
/ |
8 |
First pseudo-running version. The alternate configuration (not the main one)
has been initially tested. wbregs works for reading/writing registers,
so it is now possible to test the peripherals. |
dgisselq |
2922d 21h |
/ |
7 |
Created/added an initial specification. Updated/corrected several copywrite
notices. |
dgisselq |
2923d 12h |
/ |