OpenCores
URL https://opencores.org/ocsvn/s6soc/s6soc/trunk

Subversion Repositories s6soc

[/] [s6soc/] - Rev 28

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
28 Fixed a small lint bug associated with the scope vs the compressed scope. dgisselq 2399d 19h /s6soc/
27 Added a bootloader capability so that pieces of the program may be immediately
loaded into RAM. Further, the custom linker script, cmodram.ld, has been
added to dispatch object files to either FLASH or RAM. Finally, for those
items that were headed to RAM, their support files have been split between
RAM and FLASH code: kernel.c/ksetup.c, syspipe.c/pipesetup.c, etc.
dgisselq 2399d 20h /s6soc/
26 Modified to be able to handle different load from virtual addresses. This
enables the bootloader capability.
dgisselq 2399d 20h /s6soc/
25 Converted timer B to be a non-reloadable watchdog timer. dgisselq 2399d 20h /s6soc/
24 Made the ziptimer autoreload feature a parameter (dis)abled option. dgisselq 2399d 20h /s6soc/
23 Fixed a bug which caused every instruction to be loaded/prefetched twice. dgisselq 2399d 20h /s6soc/
22 Initial version of the ZipOS operating system construct(s). dgisselq 2403d 18h /s6soc/
21 Adds two device drivers: one for the SPI display, and another for the pseudo
device that simulates the Real-Time Clock.
dgisselq 2403d 19h /s6soc/
20 This linker description file acknowledges a .fixdata section which can be
used for debug data upon startup. This allows a startup function to write
all registers out, without destroying them or modifying them on the way.
dgisselq 2403d 19h /s6soc/
19 Addition of dumpuart.cpp to dump the UART transactions to a FILE (method of
debugging the board). FLASHDRVR and ZIPLOAD were also updated to handle
loading ELF files where the code is longer than a single block.
dgisselq 2403d 19h /s6soc/
18 Added a picture of the device pinouts to the specification. dgisselq 2403d 19h /s6soc/
17 Modifications necessary to find some bugs, and to load the flash with an ELF
file.
dgisselq 2403d 19h /s6soc/
16 Bug fix. This release fixes several bugs associated with transitioning from
user mode to supervisor mode while running from flash memory. This also
rewires TIMER-B into a watch-dog timer, and adjusts the LED's to be an
indicator of interrupts and whether or not the CPU has stalled or not as well.
dgisselq 2403d 19h /s6soc/
15 Adds a new program and a new device: doorbell2 and the PmodCLS display. This
also includes a real-time clock simulator--since we couldn't fit it on the
board.
dgisselq 2409d 12h /s6soc/
14 Modified the loader so that it will load even if there are RAM variables
in the load, just as long as they aren't anything but zero. (The startup code,
however, doesn't clear memory to match--so be sure to initialize all variables.)
dgisselq 2409d 12h /s6soc/
13 Fixed a nasty parameter problem between toplevel and txuart. The UART
transmitter now both works (again), and properly generates the required
interrupts. This also finishes the fixes to the alternate toplevel file,
alttop.v, that should've been fixed in the last release.
dgisselq 2409d 13h /s6soc/
12 The UART and PWM audio now work. This includes the changes to make that
happen, as well as the source code for some UART and PWM demo programs.
dgisselq 2410d 10h /s6soc/
11 Runs on hardware now! Added proper pinouts, pipelined wishbone command
interface sufficient for loading the flash, a loader to load the flash,
and verified that they work.
dgisselq 2411d 08h /s6soc/
10 Added the capability to run ELF files natively, fully processing the ELF format. dgisselq 2411d 08h /s6soc/
9 Added pinout diagrams, based upon a (hopefully) final UCF file. dgisselq 2411d 08h /s6soc/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.