OpenCores
URL https://opencores.org/ocsvn/s6soc/s6soc/trunk

Subversion Repositories s6soc

[/] [s6soc/] [trunk/] [sw/] [host/] - Rev 54

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
52 Latest S/W changes to both the host and ZipOS software dgisselq 2578d 22h /s6soc/trunk/sw/host/
48 Added missing sw/host and sw/zipos files dgisselq 2597d 22h /s6soc/trunk/sw/host/
45 S6SoC 8-bit support dgisselq 2597d 22h /s6soc/trunk/sw/host/
38 Updated the documentation. dgisselq 2893d 13h /s6soc/trunk/sw/host/
26 Modified to be able to handle different load from virtual addresses. This
enables the bootloader capability.		 dgisselq 2900d 22h /s6soc/trunk/sw/host/
19 Addition of dumpuart.cpp to dump the UART transactions to a FILE (method of
debugging the board). FLASHDRVR and ZIPLOAD were also updated to handle
loading ELF files where the code is longer than a single block.		 dgisselq 2904d 22h /s6soc/trunk/sw/host/
14 Modified the loader so that it will load even if there are RAM variables
in the load, just as long as they aren't anything but zero. (The startup code,
however, doesn't clear memory to match--so be sure to initialize all variables.)		 dgisselq 2910d 15h /s6soc/trunk/sw/host/
12 The UART and PWM audio now work. This includes the changes to make that
happen, as well as the source code for some UART and PWM demo programs.		 dgisselq 2911d 13h /s6soc/trunk/sw/host/
11 Runs on hardware now! Added proper pinouts, pipelined wishbone command
interface sufficient for loading the flash, a loader to load the flash,
and verified that they work.		 dgisselq 2912d 11h /s6soc/trunk/sw/host/
8 First pseudo-running version. The alternate configuration (not the main one)
has been initially tested. wbregs works for reading/writing registers,
so it is now possible to test the peripherals.		 dgisselq 2917d 11h /s6soc/trunk/sw/host/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.