OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] - Rev 113

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
113 Bug fix: the Makefile wasn't building gcc, and the binutils would not allocate
space for common variables or zero'd (bss) variables properly. Several binutils
bugs were fixed to get variables to be allocated properly. Those are
reflected in this updated patch.
dgisselq 2921d 22h /
112 Removed some debugging code from the compiler. dgisselq 2924d 17h /
111 Bug fix compiler update! This fixes a lot of the bugs associated with the
previous compiler release.
dgisselq 2924d 18h /
110 The makefile no longer requires (or supports) building the obsolete machine
code test file optest.
dgisselq 2924d 18h /
109 This file is now marked as obsolete. dgisselq 2924d 18h /
108 Just to clarify expectations ... this makefile hardly builds anything. dgisselq 2934d 19h /
107 Adding a missing file. dgisselq 2935d 10h /
106 Updated to allow building without the sources for the graphics used in the
document.
dgisselq 2935d 14h /
105 Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC.
dgisselq 2940d 18h /
104 An updated build script, actually builds zip-gcc. dgisselq 2941d 18h /
103 A barely functional, but somewhat working, version of GCC to check in.
If the Lord is willing, it should be accompanied by a newlib port soon.
That port should move the GCC status from barely functional but somewhat
working to functional and working, although not (yet) complete.
dgisselq 2941d 23h /
102 Updated bugfix version of the binutils patch, and a first patch of GCC.
The GCC patch is undergoing ongoing and active development. It is also known to
continue to contain active bugs. (It's not done yet.)
dgisselq 2944d 07h /
101 Adjusted the "BREAK" instruction so that it will now disassemble properly
with an operand. This was necessary to create a (trap_if ...) instruction
for the GCC compiler.
dgisselq 2946d 10h /
100 Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.)
dgisselq 2946d 10h /
99 Added big-endian versus little-endian functionality. You can now specify which
your input file is as a command line parameter, and zdump will properly
disassemble the file.
dgisselq 2946d 10h /
98 Added justed longjump instructions from the previous (not used, broken)
functionality to the new LOD (PC),PC functionality.
dgisselq 2946d 10h /
97 Added longjump instructions. dgisselq 2946d 10h /
96 Added the longjump functionality, so that the assembler will properly assemble
instructions to arbitrary 32-bit addresses.
dgisselq 2946d 10h /
95 Fixed a bug whereby a mistaken code for CLR was masking a valid LDI of a large
integer value.
dgisselq 2948d 16h /
94 These changes make it possible to build binutils-2.25/ here in this
directory. "make binutils" should be all that is necessary to build the
entire binutils package for the Zip CPU.

The default configure script, run from gas-script.sh below, will build and
install these utilities in an install/ subdirectory made below sw/.
dgisselq 2973d 13h /
93 A BINUTILS BACKEND IS NOW AVAILABLE!!!! dgisselq 2981d 11h /
92 Adjustments made to match the simplified early branching. dgisselq 2981d 11h /
91 Minor updates. dgisselq 2981d 11h /
90 Removed MOV x(PC),PC from the list of possible early branching instructions.
ADD X,PC and LDI X,PC are now the only recognized early branching instructions.
This was done to spare logic, although I don't think I spared more than a
LUT or two.
dgisselq 2981d 11h /
89 Minor changes, to include making default branching an ADD.[condition] X,PC
instruction, rather than allowing both MOV X(PC),PC and ADD X,PC instructions.

Further zopcodes.cpp contains several bug fixes.
dgisselq 2981d 11h /
88 Eliminated some warnings. The div fixes were to simplify the logic, even though
the result is less readable ...
dgisselq 3005d 11h /
87 Adjusted the operator input line to reflect actual logic inputs, rather
than the registered inputs which may have been out of date. (Indeed, they
were out of date for the bug I was chasing and fixed ...)
dgisselq 3007d 09h /
86 Removed the requirement to have the dev.scope.cpu hardware defined outside
of the Zip CPU (it was defined in another project). This was causing a bus
error in the simulator (which it should have), but taking it out fixes things
in the simulator (while removing capability from one special piece of H/W).
dgisselq 3007d 09h /
85 Minor update/correction to operand B definition. dgisselq 3007d 09h /
84 Minor updates. dgisselq 3007d 09h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.