OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] - Rev 77

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
77 First check-in: the test bench for the divide instruction. dgisselq 3013d 08h /
76 The biggest change here was to zippy_tb, to make it more similar to the debugger
and to make it work with VLIW-type instructions.
dgisselq 3013d 08h /
75 Modified for VLIW instructions. dgisselq 3013d 08h /
74 Added a bunch of debugging code to the Dhrystone benchmark assembly file, as
well as two new testing assembly files.
dgisselq 3013d 08h /
73 Documentations updates. dgisselq 3013d 08h /
72 Some updated graphics, now containing images of the CPU that include the
divide and (currently non-existant) floating point unit.
dgisselq 3013d 08h /
71 This contains a bunch of bug fixes. (A lot ...) For example, the pipeline
stall code has also seriously changed, to fixed the pipeline memory load/op
stage conflict, while maintaining no-stall operation for operands that don't
need an offset. This had a cascading effect, however, so that the multiply
could no longer complete in a single cycle. Therefore, the timing on the
multiplies was slowed down to two cycles from a single cycle. (It's the
only two-cycle ALU operation ...) The illegal instruction code has also been
fixed, so that illegal instructions no longer stalls the prefetch bus.
dgisselq 3013d 08h /
70 Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes.
dgisselq 3013d 09h /
69 This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture.
dgisselq 3019d 13h /
68 Updated specification, includes well illustrated pipeline discussion. dgisselq 3054d 13h /
67 Includes timing diagrams in support of a very descriptive specification section. dgisselq 3054d 13h /
66 Adjusted the support for the DEBUG_SCOPE within these so that it can be
compiled in, or not, based upon an external build configuration file: cpudefs.v.
That allows me to make that file project specific, while the rest of the CPU
is shared among all projects.
dgisselq 3080d 13h /
65 Lots of logic simplifications to the core, in addition to better support for
illegal instruction detection and bus error detection. The biggest change
had to deal with pushing the debug write interface into the ALU write
processing path. This simplifies the logic of adjusting the PC and CC
registers primarily, but also any writes to other registers. It also delays
these register writes by a clock, but since the debug interface is already
ridiculously slow I doubt that matters any.
dgisselq 3080d 13h /
64 Shuffled some comments into here from elsewhere. dgisselq 3080d 13h /
63 Simplified bus interactions, and added support for detecting illegal
instructions (i.e. bus errors) in the pipefetch routine.
dgisselq 3080d 13h /
62 Simplified the subtraction logic, so the carry bit no longer depends on
a separate 32-bit operation but becomes part of the subtract operation.
dgisselq 3080d 13h /
61 Simplified the bus delay logic. Depends upon the stall line being irrelevant
outside of a bus cycle.
dgisselq 3080d 13h /
60 Fixed assembler processing of jump instructions, so that the new fast
return instruction can be used. The test file was modified to test
pipelined value passing within the CPU. That's where the value gets
(re)used before being stored back in the register file. As of this release,
all tests work.
dgisselq 3080d 13h /
59 Adjusted these library routines to use the new stack frame and calling
conventions.
dgisselq 3080d 13h /
58 Added a rudimentary profiling support to the simulator. dgisselq 3080d 14h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.