OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] - Rev 86

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
86 Removed the requirement to have the dev.scope.cpu hardware defined outside
of the Zip CPU (it was defined in another project). This was causing a bus
error in the simulator (which it should have), but taking it out fixes things
in the simulator (while removing capability from one special piece of H/W).
dgisselq 3007d 22h /
85 Minor update/correction to operand B definition. dgisselq 3007d 22h /
84 Minor updates. dgisselq 3007d 22h /
83 Added a flag to indicate whether an exception took place on the first
or second half of a VLIW instruction--will be zero in non-VLIW mode,
equivalent to the second half of the instruction having caused the
exception. (Expect these flags to be reordered some time in the future into
a less haphazard ordering ...)

Vastly simplified the pipeline logic, primarily for op_stall, but also touched
opA and opB. (Trying to fit within timing on Spartan 6 ...)

Changed division instruction to include a reset on clear_pipeline, to make
certain [BC $addr; DIV Rx,Ry ] works regardless of whether the condition is
true.
dgisselq 3007d 22h /
82 Found and (I hope) fixed a nasty bug that would send the prefetch into an
endless loop whenever you jumped to an instruction at the last location
in an unloaded cache line.
dgisselq 3007d 22h /
81 Trying to clean up ISE generated warnings. dgisselq 3007d 22h /
80 Bug fix: declared the (combined) multiply to be signed again. Also
changed the name of the generate'd for block, to keep ISE from complaining.
dgisselq 3007d 22h /
79 Adjusted the opcodes for NOOP, BREAK, and LOCK. dgisselq 3012d 02h /
78 Found/corrected annoying bug in floating point documentation of the opcode
table.
dgisselq 3012d 02h /
77 First check-in: the test bench for the divide instruction. dgisselq 3013d 01h /
76 The biggest change here was to zippy_tb, to make it more similar to the debugger
and to make it work with VLIW-type instructions.
dgisselq 3013d 01h /
75 Modified for VLIW instructions. dgisselq 3013d 01h /
74 Added a bunch of debugging code to the Dhrystone benchmark assembly file, as
well as two new testing assembly files.
dgisselq 3013d 01h /
73 Documentations updates. dgisselq 3013d 01h /
72 Some updated graphics, now containing images of the CPU that include the
divide and (currently non-existant) floating point unit.
dgisselq 3013d 01h /
71 This contains a bunch of bug fixes. (A lot ...) For example, the pipeline
stall code has also seriously changed, to fixed the pipeline memory load/op
stage conflict, while maintaining no-stall operation for operands that don't
need an offset. This had a cascading effect, however, so that the multiply
could no longer complete in a single cycle. Therefore, the timing on the
multiplies was slowed down to two cycles from a single cycle. (It's the
only two-cycle ALU operation ...) The illegal instruction code has also been
fixed, so that illegal instructions no longer stalls the prefetch bus.
dgisselq 3013d 01h /
70 Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes.
dgisselq 3013d 02h /
69 This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture.
dgisselq 3019d 06h /
68 Updated specification, includes well illustrated pipeline discussion. dgisselq 3054d 06h /
67 Includes timing diagrams in support of a very descriptive specification section. dgisselq 3054d 06h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.