| Rev |
Log message |
Author |
Age |
Path |
| 180 |
Cleaned up the stall logic--made it independent of whether or not we are
designed to be alternating or not. |
dgisselq |
2773d 02h |
/zipcpu/ |
| 179 |
Lots of changes, most (all?) of them to the non-pipelined core. The resulting
core is now about 100-120 LUTs smaller when not-pipelined, and yet maintains
the pipelined logic when necessary. |
dgisselq |
2773d 02h |
/zipcpu/ |
| 178 |
Rewrote the parameter controlled logic to be just that: perameter controller,
rather than depending upon generics. The result reduces our area by a couple
LUTs. |
dgisselq |
2773d 02h |
/zipcpu/ |
| 177 |
Fixed the illegal address logic to be more precise. |
dgisselq |
2773d 02h |
/zipcpu/ |
| 176 |
Switched from distributed to block RAM, and adjusted the logic to help
timing closure. The resulting core will build in designs up to 200MHz in
speed. |
dgisselq |
2773d 02h |
/zipcpu/ |
| 175 |
Fixed the carry bit for logical shifts: it is the last bit shifted out of the
register. 0x80000000>>32 yields a 0 with carry set. Anything logically
shifted by a number greater than thirty two clears carry and register. |
dgisselq |
2773d 02h |
/zipcpu/ |
| 174 |
Simplified the divide to improve timing performance. |
dgisselq |
2773d 02h |
/zipcpu/ |
| 173 |
Adjusted the pdfinfo field, to accommodate Google's bot. |
dgisselq |
2773d 03h |
/zipcpu/ |
| 172 |
Added a test to see if the compiler properly handles a large number of
arguments. Further, the sibcall enabled compiler now correcly makes a
sibcall from the end of txreg(). |
dgisselq |
2773d 03h |
/zipcpu/ |
| 171 |
This fixes the problem whereby the ZipCPU didn't properly access more than
5 word-sized function parameters. |
dgisselq |
2775d 08h |
/zipcpu/ |
| 170 |
Minor updates to the orconf.pdf pre-conference slide. (Added the 'to be
revealed' line. |
dgisselq |
2785d 02h |
/zipcpu/ |
| 169 |
Added details of LM32 to the (pre) ORConf survey slide in trunk/doc. |
dgisselq |
2821d 02h |
/zipcpu/ |
| 168 |
An updated version of the intensive CPU test. This one runs from C, and
requires a UART port and a PIC, but can run quite successfully on multiple
SoCs that have been built with the ZipCPU internal to them. |
dgisselq |
2834d 02h |
/zipcpu/ |
| 167 |
Updated the spec to reflect changes in the CC register: the user break
flag, and the ability to command a clearing of the instruction cache. |
dgisselq |
2834d 02h |
/zipcpu/ |
| 166 |
Bugfix version. This fixes a problem whereby function addresses with offsets
were not properly calculated, together with properly setting up pcrelative
offsets when using the move function together with a label. |
dgisselq |
2834d 06h |
/zipcpu/ |
| 165 |
Added a test to make certain that the arithmetic right shift was properly
propagating the high order bit. (The test works under verilator, but didn't
initially work in Xilinx -- thus a difference between the two.) |
dgisselq |
2834d 06h |
/zipcpu/ |
| 164 |
Updated with inputs from Hellwig Geisse regarding the details of the ECO32
CPU. |
dgisselq |
2842d 08h |
/zipcpu/ |
| 163 |
Trimmed OR1K instruction set down from 219 instructions, to the minimum number
of 48. Thanks to Olof for helping identify the minimal set! |
dgisselq |
2850d 10h |
/zipcpu/ |
| 162 |
Noted 64-bit integers are by extension, as are vector instructions. |
dgisselq |
2850d 11h |
/zipcpu/ |
| 161 |
Initial version of the ORConf slides, showing only the initial CPU survey. |
dgisselq |
2850d 11h |
/zipcpu/ |
| 160 |
Logic updates, and bug fix corrections to bring this in line with the current
XuLA2-LX25 SoC version. (i.e., the XuLA version was debugged and improved,
this update pushes those improvements to the mainline.) |
dgisselq |
2865d 22h |
/zipcpu/ |
| 159 |
Now supports building a simulator that can load ELF files, such as GCC and/or
binutils will produce. |
dgisselq |
2865d 22h |
/zipcpu/ |
| 158 |
Now automatically builds the toolchain by default. |
dgisselq |
2865d 22h |
/zipcpu/ |
| 157 |
Added the divide unit to the list of ZipCPU dependencies. |
dgisselq |
2865d 22h |
/zipcpu/ |
| 156 |
Fixed a compiler warning for an unused result. |
dgisselq |
2865d 22h |
/zipcpu/ |
| 155 |
Improved debug trace quality, for finding bugs after the fact. |
dgisselq |
2865d 22h |
/zipcpu/ |
| 154 |
Added timing checks on the busy and valid signals: either one of the two is
valid, or the whole is idle. |
dgisselq |
2865d 22h |
/zipcpu/ |
| 153 |
Adds internal link functionality to the specification document format. |
dgisselq |
2865d 22h |
/zipcpu/ |
| 152 |
Updated to match the new/updated multiply instructions. Of course, this is
still hand optimized and not compiled--so it's not really a true and proper
test (yet), but ... it's what I have. |
dgisselq |
2898d 20h |
/zipcpu/ |
| 151 |
Minor formatting change. |
dgisselq |
2898d 21h |
/zipcpu/ |
