OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] - Rev 129

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
129 Bug fix. Fixes some ugly race conditions that would cause code from the wrong
address to be executed.
dgisselq 2898d 11h /zipcpu/trunk
128 Cleaned up some comments. dgisselq 2898d 12h /zipcpu/trunk
127 Lots of changes and bugfixes. The disassembler produces more readable output.
The assembler and linker will no longer automatically use LDIHI--in preparation
for switching to LONG_MPY. LDIHI/LDILO pairs have been changed to BREV/LDILO
pairs. Within the compiler, conditional moves have been rebuilt. They're not
perfect yet, but they are better. Lots of peephole optimizations, etc.
dgisselq 2898d 12h /zipcpu/trunk
126 Lots of changes preparing the assembly for an instruction set change. While
implemented, they are still commented out via #ifdef LONG_MPY. By defining
LONG_MPY, this new change set will take place.
dgisselq 2898d 12h /zipcpu/trunk
125 This patch contains minor updates. Two are important to mention: 1) It turns
the compare optimizations back on within the zip.md file, and 2) it fixes an
internal compiler fault that was causing the compiler to such up all of my
memory in an infinite recursion.
dgisselq 2906d 19h /zipcpu/trunk
124 Lots of changes, lots of bugfixes--both to the compiler as well as to the
assembler. (Ex: the assembler will now properly execute a LDI _sym+5,R0).
Many compiler optimizations have been turned off, however. They will probably
be turned back on in the near future--once I get this version proven without
them.
dgisselq 2908d 09h /zipcpu/trunk
123 This test now catches and tests some of the pipeline bugs I've been chasing. dgisselq 2908d 09h /zipcpu/trunk
122 This represents a major rewrite of the machine definition file, gcc/config/zip/
zip.md. In particular, the architecture has been changed from a "cc0"
architecture to one with a specific CC_REG and CCmode. Instructions in the
machine definition file must now explicitly set this register with their
results. The result is better condition code handling, better usage of the
conditional execution modes of certain instructions, and even some decent
optimizations.
dgisselq 2913d 13h /zipcpu/trunk
121 Fixed the bug whereby BGE instructions dissassembled as BGT instructions and
vice versa. Loads and stores of absolute addresses now show those addresses
in ($<>). The assembler also accepts integer offsets to symbols, although
it isn't clear that it does the "right" thing with them yet.
dgisselq 2913d 13h /zipcpu/trunk
120 Should've regression tested that last build. This one fixes what that last
fix broke: Registers with offsets (i.e. operand-B) now work (again).
dgisselq 2917d 09h /zipcpu/trunk
119 Fixed some limits bugs. Now LDI.Z 1 produces LDIHI.Z 0, LDOLO.Z 1 as desired
instead of the erroneous BREV.Z 0. Likewise, loading 0x80000000 no longer
produces a clear instruction, but actually loads the value of interest.
dgisselq 2917d 09h /zipcpu/trunk
118 Fixes two bugs: 1) in the early branching code within the instruction decoder.
This prevented the early branching from working when built with Xilinx's tools,
while the code worked with Verilator. 2) The CPU was not working with the
traditional cache and early branching disabled. These two bugs masked each
other. The replacement code is simpler.
dgisselq 2917d 12h /zipcpu/trunk
117 Bug fixes: This adds the zip_ucc() instruction as a builtin, fixes the zip_cc()
builtin (both are now unspec_volatile) together with fixing the *_context(int*)
builtins so that they use five registers, never four. Further, this fixes the
negative stack space offset bug. Many of the GCC files now have Zip debugging
hooks within them as well, to simplify further debugging of the compiler.
dgisselq 2917d 20h /zipcpu/trunk
116 Updated binutils. This fixes problems with linking global variables, fixes
the map file report, adjusts the LJMP instruction disassembly to display the
resulting address, as well as in general fixing up link problems when
sizeof(byte) is 32-bits.
dgisselq 2917d 20h /zipcpu/trunk
115 A bug fix, applies to when there are more than 9 interrupt lines into the CPU. dgisselq 2917d 20h /zipcpu/trunk
114 Fixes a bug that killed make binutils before the build-gas directory
was created.
dgisselq 2922d 21h /zipcpu/trunk
113 Bug fix: the Makefile wasn't building gcc, and the binutils would not allocate
space for common variables or zero'd (bss) variables properly. Several binutils
bugs were fixed to get variables to be allocated properly. Those are
reflected in this updated patch.
dgisselq 2923d 00h /zipcpu/trunk
112 Removed some debugging code from the compiler. dgisselq 2925d 20h /zipcpu/trunk
111 Bug fix compiler update! This fixes a lot of the bugs associated with the
previous compiler release.
dgisselq 2925d 20h /zipcpu/trunk
110 The makefile no longer requires (or supports) building the obsolete machine
code test file optest.
dgisselq 2925d 20h /zipcpu/trunk
109 This file is now marked as obsolete. dgisselq 2925d 20h /zipcpu/trunk
108 Just to clarify expectations ... this makefile hardly builds anything. dgisselq 2935d 22h /zipcpu/trunk
107 Adding a missing file. dgisselq 2936d 13h /zipcpu/trunk
106 Updated to allow building without the sources for the graphics used in the
document.
dgisselq 2936d 17h /zipcpu/trunk
105 Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC.
dgisselq 2941d 20h /zipcpu/trunk
104 An updated build script, actually builds zip-gcc. dgisselq 2942d 20h /zipcpu/trunk
103 A barely functional, but somewhat working, version of GCC to check in.
If the Lord is willing, it should be accompanied by a newlib port soon.
That port should move the GCC status from barely functional but somewhat
working to functional and working, although not (yet) complete.
dgisselq 2943d 01h /zipcpu/trunk
102 Updated bugfix version of the binutils patch, and a first patch of GCC.
The GCC patch is undergoing ongoing and active development. It is also known to
continue to contain active bugs. (It's not done yet.)
dgisselq 2945d 09h /zipcpu/trunk
101 Adjusted the "BREAK" instruction so that it will now disassemble properly
with an operand. This was necessary to create a (trap_if ...) instruction
for the GCC compiler.
dgisselq 2947d 12h /zipcpu/trunk
100 Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.)
dgisselq 2947d 12h /zipcpu/trunk

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.