OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [rtl/] [core/] - Rev 133

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
133 Changes preceding an instruction set update, which will change the multiply
operation from a 16x16 bit multiply to three types of 32x32-bit multiplies.
dgisselq 2897d 16h /zipcpu/trunk/rtl/core/
132 Lots of minor bug fixes. dgisselq 2897d 16h /zipcpu/trunk/rtl/core/
131 Fixed a variable use before declaration error. dgisselq 2897d 16h /zipcpu/trunk/rtl/core/
130 Simplified the lock logic, and removed it when pipelining was not defined. This
also means the file is now dependent upon cpudefs.v. In another change, brev
was modified so as not to update the flags. This makes it useable with GCC
as a potential move or load immediate instruction.
dgisselq 2897d 16h /zipcpu/trunk/rtl/core/
129 Bug fix. Fixes some ugly race conditions that would cause code from the wrong
address to be executed.
dgisselq 2897d 16h /zipcpu/trunk/rtl/core/
118 Fixes two bugs: 1) in the early branching code within the instruction decoder.
This prevented the early branching from working when built with Xilinx's tools,
while the code worked with Verilator. 2) The CPU was not working with the
traditional cache and early branching disabled. These two bugs masked each
other. The replacement code is simpler.
dgisselq 2916d 17h /zipcpu/trunk/rtl/core/
105 Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC.
dgisselq 2941d 01h /zipcpu/trunk/rtl/core/
91 Minor updates. dgisselq 2981d 18h /zipcpu/trunk/rtl/core/
90 Removed MOV x(PC),PC from the list of possible early branching instructions.
ADD X,PC and LDI X,PC are now the only recognized early branching instructions.
This was done to spare logic, although I don't think I spared more than a
LUT or two.
dgisselq 2981d 18h /zipcpu/trunk/rtl/core/
88 Eliminated some warnings. The div fixes were to simplify the logic, even though
the result is less readable ...
dgisselq 3005d 18h /zipcpu/trunk/rtl/core/
83 Added a flag to indicate whether an exception took place on the first
or second half of a VLIW instruction--will be zero in non-VLIW mode,
equivalent to the second half of the instruction having caused the
exception. (Expect these flags to be reordered some time in the future into
a less haphazard ordering ...)

Vastly simplified the pipeline logic, primarily for op_stall, but also touched
opA and opB. (Trying to fit within timing on Spartan 6 ...)

Changed division instruction to include a reset on clear_pipeline, to make
certain [BC $addr; DIV Rx,Ry ] works regardless of whether the condition is
true.
dgisselq 3007d 17h /zipcpu/trunk/rtl/core/
82 Found and (I hope) fixed a nasty bug that would send the prefetch into an
endless loop whenever you jumped to an instruction at the last location
in an unloaded cache line.
dgisselq 3007d 17h /zipcpu/trunk/rtl/core/
81 Trying to clean up ISE generated warnings. dgisselq 3007d 17h /zipcpu/trunk/rtl/core/
80 Bug fix: declared the (combined) multiply to be signed again. Also
changed the name of the generate'd for block, to keep ISE from complaining.
dgisselq 3007d 17h /zipcpu/trunk/rtl/core/
71 This contains a bunch of bug fixes. (A lot ...) For example, the pipeline
stall code has also seriously changed, to fixed the pipeline memory load/op
stage conflict, while maintaining no-stall operation for operands that don't
need an offset. This had a cascading effect, however, so that the multiply
could no longer complete in a single cycle. Therefore, the timing on the
multiplies was slowed down to two cycles from a single cycle. (It's the
only two-cycle ALU operation ...) The illegal instruction code has also been
fixed, so that illegal instructions no longer stalls the prefetch bus.
dgisselq 3012d 20h /zipcpu/trunk/rtl/core/
69 This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture.
dgisselq 3019d 00h /zipcpu/trunk/rtl/core/
65 Lots of logic simplifications to the core, in addition to better support for
illegal instruction detection and bus error detection. The biggest change
had to deal with pushing the debug write interface into the ALU write
processing path. This simplifies the logic of adjusting the PC and CC
registers primarily, but also any writes to other registers. It also delays
these register writes by a clock, but since the debug interface is already
ridiculously slow I doubt that matters any.
dgisselq 3080d 01h /zipcpu/trunk/rtl/core/
63 Simplified bus interactions, and added support for detecting illegal
instructions (i.e. bus errors) in the pipefetch routine.
dgisselq 3080d 01h /zipcpu/trunk/rtl/core/
62 Simplified the subtraction logic, so the carry bit no longer depends on
a separate 32-bit operation but becomes part of the subtract operation.
dgisselq 3080d 01h /zipcpu/trunk/rtl/core/
56 Here's a bit of work in progress for getting the Zip CPU working on a XuLA2
board. Many changes include: the existence of a cpudefs.v file to control
what "options" are included in the ZipCPU build. This allows build control
to be separated from the project directory (one build for a XuLA2 board,
another for a Basys-3 development board). Other changes have made things
perhaps harder to read, but they get rid of warnings from XST.

A big change was the addition of the (* ram_style="distributed" *) comment
for the register set. This was necessary to keep XST from inferring a block
RAM and breaking the logic that was supposed to take place between a register
read and when it was used.
dgisselq 3090d 03h /zipcpu/trunk/rtl/core/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.