OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [rtl/] [core/] [pipefetch.v] - Rev 65

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
63 Simplified bus interactions, and added support for detecting illegal
instructions (i.e. bus errors) in the pipefetch routine.
dgisselq 3339d 19h /zipcpu/trunk/rtl/core/pipefetch.v
56 Here's a bit of work in progress for getting the Zip CPU working on a XuLA2
board. Many changes include: the existence of a cpudefs.v file to control
what "options" are included in the ZipCPU build. This allows build control
to be separated from the project directory (one build for a XuLA2 board,
another for a Basys-3 development board). Other changes have made things
perhaps harder to read, but they get rid of warnings from XST.

A big change was the addition of the (* ram_style="distributed" *) comment
for the register set. This was necessary to keep XST from inferring a block
RAM and breaking the logic that was supposed to take place between a register
read and when it was used.
dgisselq 3349d 22h /zipcpu/trunk/rtl/core/pipefetch.v
48 Files added/updated to get Dhrystone benchmark to work. Several fixes
to the CPU in the process, 'cause it wasn't working. Stall-less ALU
ops now work better, to include grabbing the memory result as it comes out
of the memory unit and placing it straight into either ALU or memory unit
for the next instruction.
dgisselq 3359d 13h /zipcpu/trunk/rtl/core/pipefetch.v
38 A couple of quick updates:

- The Zip CPU now supports pipelined memory access at one clock per
instruction (assuming all the instructions are in the cache)
- There is now a 'zipbones' module to build a Zip System without peripherals.
Any peripherals would then need to be external to the CPU.
- Some bug fixes.

Documentation changes coming shortly.
dgisselq 3362d 19h /zipcpu/trunk/rtl/core/pipefetch.v
36 *Lots* of changes to increase processing speed and remove pipeline stalls.

Removed the useless flash cache, replacing it with a proper DMA controller.

"make test" in the main directory now runs a test program in Verilator and
reports on the results.
dgisselq 3371d 22h /zipcpu/trunk/rtl/core/pipefetch.v
18 A couple of changes: Registers can now be changed via the debug interface.
Also, in anticipation of being able to interrupt the break the processor,
the CPU now exports an interrupt line to the external environment to tell
when it has been halted. Thus, if it gets halted by a break instruction,
the ZipSystem will interrupt whatever's in its environment so that the
debugger can come and examine its state.

Oh, and one other: because you can't examine the state of the CPU without
halting it, I modified the debug control register to export the four
useful flags: break-enable, interrupts enabled, and sleep (step comes for
free in this implementation).
dgisselq 3407d 10h /zipcpu/trunk/rtl/core/pipefetch.v
11 This version works on an FPGA!!!

(Or at least the wdt.S program passes ...)
dgisselq 3425d 23h /zipcpu/trunk/rtl/core/pipefetch.v
3 Rebuilt the pipefetch (instruction fetch/cache module) so that it will
let go of the bus if the memory unit wants it to execute an instruction.
Pipefetch will then grab the bus back whtn the memory unit is done, so things
otherwise continue as they were before.

Other tweaks were made to try to reduce code complexity.
dgisselq 3426d 20h /zipcpu/trunk/rtl/core/pipefetch.v
2 An initial load. No promises of what works or not, but this is where the
project is at.
dgisselq 3427d 14h /zipcpu/trunk/rtl/core/pipefetch.v

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.