OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [sw/] - Rev 100

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
100 Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.)
dgisselq 3136d 02h /zipcpu/trunk/sw/
99 Added big-endian versus little-endian functionality. You can now specify which
your input file is as a command line parameter, and zdump will properly
disassemble the file.
dgisselq 3136d 02h /zipcpu/trunk/sw/
98 Added justed longjump instructions from the previous (not used, broken)
functionality to the new LOD (PC),PC functionality.
dgisselq 3136d 02h /zipcpu/trunk/sw/
97 Added longjump instructions. dgisselq 3136d 02h /zipcpu/trunk/sw/
96 Added the longjump functionality, so that the assembler will properly assemble
instructions to arbitrary 32-bit addresses.
dgisselq 3136d 02h /zipcpu/trunk/sw/
95 Fixed a bug whereby a mistaken code for CLR was masking a valid LDI of a large
integer value.
dgisselq 3138d 09h /zipcpu/trunk/sw/
94 These changes make it possible to build binutils-2.25/ here in this
directory. "make binutils" should be all that is necessary to build the
entire binutils package for the Zip CPU.

The default configure script, run from gas-script.sh below, will build and
install these utilities in an install/ subdirectory made below sw/.
dgisselq 3163d 06h /zipcpu/trunk/sw/
93 A BINUTILS BACKEND IS NOW AVAILABLE!!!! dgisselq 3171d 03h /zipcpu/trunk/sw/
89 Minor changes, to include making default branching an ADD.[condition] X,PC
instruction, rather than allowing both MOV X(PC),PC and ADD X,PC instructions.

Further zopcodes.cpp contains several bug fixes.
dgisselq 3171d 04h /zipcpu/trunk/sw/
70 Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes.
dgisselq 3202d 05h /zipcpu/trunk/sw/
69 This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture.
dgisselq 3208d 10h /zipcpu/trunk/sw/
60 Fixed assembler processing of jump instructions, so that the new fast
return instruction can be used. The test file was modified to test
pipelined value passing within the CPU. That's where the value gets
(re)used before being stored back in the register file. As of this release,
all tests work.
dgisselq 3269d 10h /zipcpu/trunk/sw/
59 Adjusted these library routines to use the new stack frame and calling
conventions.
dgisselq 3269d 10h /zipcpu/trunk/sw/
55 A test was added to double check whether carry following right shifts worked.
This was a necessary part of getting two cycle linear feedback shift register
operations working for a memory test on a XuLA2 board. With this, I can now
verify that such feedback registers work for pseudorandom number purposes.
dgisselq 3279d 12h /zipcpu/trunk/sw/
54 This builds on the support for backslash character escapes in both single
and multicharacter expressions. Backslash character escapes are now
possible with quotations and backslashes, and the same code to interpret
the escapes is applied to both single and multicharacter sequences.
dgisselq 3279d 12h /zipcpu/trunk/sw/
53 Updated the #include/#define directives to work properly for nested includes.
(They were supposed to work properly for nested includes before ... and didn't)
This fixes those bugs.
dgisselq 3279d 12h /zipcpu/trunk/sw/
52 Added the capability to "see" character's encoded within a binary file,
by printing the character value(s) of each opcode (if they are printable)
on each line.
dgisselq 3279d 12h /zipcpu/trunk/sw/
51 Added the capability to look at binary files and 'see' characters as they
are encoded in memory.
dgisselq 3279d 12h /zipcpu/trunk/sw/
46 A series of updates associated with getting Dhrystone to work. Includes
updates to getting multiple files to link/work together within the assembler,
as well as getting quoted quotations to work in the lexer, and better
include file support in the preprocessor.
dgisselq 3289d 04h /zipcpu/trunk/sw/
45 Library routines for 32-bit multiply and divide, both signed and unsigned. dgisselq 3289d 04h /zipcpu/trunk/sw/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.