OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [sw/] - Rev 105

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
105 Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC.
dgisselq 2396d 17h /zipcpu/trunk/sw/
104 An updated build script, actually builds zip-gcc. dgisselq 2397d 17h /zipcpu/trunk/sw/
103 A barely functional, but somewhat working, version of GCC to check in.
If the Lord is willing, it should be accompanied by a newlib port soon.
That port should move the GCC status from barely functional but somewhat
working to functional and working, although not (yet) complete.
dgisselq 2397d 22h /zipcpu/trunk/sw/
102 Updated bugfix version of the binutils patch, and a first patch of GCC.
The GCC patch is undergoing ongoing and active development. It is also known to
continue to contain active bugs. (It's not done yet.)
dgisselq 2400d 06h /zipcpu/trunk/sw/
101 Adjusted the "BREAK" instruction so that it will now disassemble properly
with an operand. This was necessary to create a (trap_if ...) instruction
for the GCC compiler.
dgisselq 2402d 09h /zipcpu/trunk/sw/
100 Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.)
dgisselq 2402d 09h /zipcpu/trunk/sw/
99 Added big-endian versus little-endian functionality. You can now specify which
your input file is as a command line parameter, and zdump will properly
disassemble the file.
dgisselq 2402d 09h /zipcpu/trunk/sw/
98 Added justed longjump instructions from the previous (not used, broken)
functionality to the new LOD (PC),PC functionality.
dgisselq 2402d 09h /zipcpu/trunk/sw/
97 Added longjump instructions. dgisselq 2402d 09h /zipcpu/trunk/sw/
96 Added the longjump functionality, so that the assembler will properly assemble
instructions to arbitrary 32-bit addresses.
dgisselq 2402d 09h /zipcpu/trunk/sw/
95 Fixed a bug whereby a mistaken code for CLR was masking a valid LDI of a large
integer value.
dgisselq 2404d 16h /zipcpu/trunk/sw/
94 These changes make it possible to build binutils-2.25/ here in this
directory. "make binutils" should be all that is necessary to build the
entire binutils package for the Zip CPU.

The default configure script, run from gas-script.sh below, will build and
install these utilities in an install/ subdirectory made below sw/.
dgisselq 2429d 13h /zipcpu/trunk/sw/
93 A BINUTILS BACKEND IS NOW AVAILABLE!!!! dgisselq 2437d 10h /zipcpu/trunk/sw/
89 Minor changes, to include making default branching an ADD.[condition] X,PC
instruction, rather than allowing both MOV X(PC),PC and ADD X,PC instructions.

Further zopcodes.cpp contains several bug fixes.
dgisselq 2437d 11h /zipcpu/trunk/sw/
70 Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes.
dgisselq 2468d 12h /zipcpu/trunk/sw/
69 This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture.
dgisselq 2474d 17h /zipcpu/trunk/sw/
60 Fixed assembler processing of jump instructions, so that the new fast
return instruction can be used. The test file was modified to test
pipelined value passing within the CPU. That's where the value gets
(re)used before being stored back in the register file. As of this release,
all tests work.
dgisselq 2535d 17h /zipcpu/trunk/sw/
59 Adjusted these library routines to use the new stack frame and calling
conventions.
dgisselq 2535d 17h /zipcpu/trunk/sw/
55 A test was added to double check whether carry following right shifts worked.
This was a necessary part of getting two cycle linear feedback shift register
operations working for a memory test on a XuLA2 board. With this, I can now
verify that such feedback registers work for pseudorandom number purposes.
dgisselq 2545d 19h /zipcpu/trunk/sw/
54 This builds on the support for backslash character escapes in both single
and multicharacter expressions. Backslash character escapes are now
possible with quotations and backslashes, and the same code to interpret
the escapes is applied to both single and multicharacter sequences.
dgisselq 2545d 19h /zipcpu/trunk/sw/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.