| Rev |
Log message |
Author |
Age |
Path |
| 105 |
Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC. |
dgisselq |
2961d 16h |
/zipcpu/trunk/sw/ |
| 104 |
An updated build script, actually builds zip-gcc. |
dgisselq |
2962d 16h |
/zipcpu/trunk/sw/ |
| 103 |
A barely functional, but somewhat working, version of GCC to check in.
If the Lord is willing, it should be accompanied by a newlib port soon.
That port should move the GCC status from barely functional but somewhat
working to functional and working, although not (yet) complete. |
dgisselq |
2962d 21h |
/zipcpu/trunk/sw/ |
| 102 |
Updated bugfix version of the binutils patch, and a first patch of GCC.
The GCC patch is undergoing ongoing and active development. It is also known to
continue to contain active bugs. (It's not done yet.) |
dgisselq |
2965d 05h |
/zipcpu/trunk/sw/ |
| 101 |
Adjusted the "BREAK" instruction so that it will now disassemble properly
with an operand. This was necessary to create a (trap_if ...) instruction
for the GCC compiler. |
dgisselq |
2967d 08h |
/zipcpu/trunk/sw/ |
| 100 |
Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.) |
dgisselq |
2967d 08h |
/zipcpu/trunk/sw/ |
| 99 |
Added big-endian versus little-endian functionality. You can now specify which
your input file is as a command line parameter, and zdump will properly
disassemble the file. |
dgisselq |
2967d 08h |
/zipcpu/trunk/sw/ |
| 98 |
Added justed longjump instructions from the previous (not used, broken)
functionality to the new LOD (PC),PC functionality. |
dgisselq |
2967d 08h |
/zipcpu/trunk/sw/ |
| 97 |
Added longjump instructions. |
dgisselq |
2967d 08h |
/zipcpu/trunk/sw/ |
| 96 |
Added the longjump functionality, so that the assembler will properly assemble
instructions to arbitrary 32-bit addresses. |
dgisselq |
2967d 08h |
/zipcpu/trunk/sw/ |
| 95 |
Fixed a bug whereby a mistaken code for CLR was masking a valid LDI of a large
integer value. |
dgisselq |
2969d 14h |
/zipcpu/trunk/sw/ |
| 94 |
These changes make it possible to build binutils-2.25/ here in this
directory. "make binutils" should be all that is necessary to build the
entire binutils package for the Zip CPU.
The default configure script, run from gas-script.sh below, will build and
install these utilities in an install/ subdirectory made below sw/. |
dgisselq |
2994d 11h |
/zipcpu/trunk/sw/ |
| 93 |
A BINUTILS BACKEND IS NOW AVAILABLE!!!! |
dgisselq |
3002d 09h |
/zipcpu/trunk/sw/ |
| 89 |
Minor changes, to include making default branching an ADD.[condition] X,PC
instruction, rather than allowing both MOV X(PC),PC and ADD X,PC instructions.
Further zopcodes.cpp contains several bug fixes. |
dgisselq |
3002d 09h |
/zipcpu/trunk/sw/ |
| 70 |
Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes. |
dgisselq |
3033d 11h |
/zipcpu/trunk/sw/ |
| 69 |
This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture. |
dgisselq |
3039d 15h |
/zipcpu/trunk/sw/ |
| 60 |
Fixed assembler processing of jump instructions, so that the new fast
return instruction can be used. The test file was modified to test
pipelined value passing within the CPU. That's where the value gets
(re)used before being stored back in the register file. As of this release,
all tests work. |
dgisselq |
3100d 16h |
/zipcpu/trunk/sw/ |
| 59 |
Adjusted these library routines to use the new stack frame and calling
conventions. |
dgisselq |
3100d 16h |
/zipcpu/trunk/sw/ |
| 55 |
A test was added to double check whether carry following right shifts worked.
This was a necessary part of getting two cycle linear feedback shift register
operations working for a memory test on a XuLA2 board. With this, I can now
verify that such feedback registers work for pseudorandom number purposes. |
dgisselq |
3110d 18h |
/zipcpu/trunk/sw/ |
| 54 |
This builds on the support for backslash character escapes in both single
and multicharacter expressions. Backslash character escapes are now
possible with quotations and backslashes, and the same code to interpret
the escapes is applied to both single and multicharacter sequences. |
dgisselq |
3110d 18h |
/zipcpu/trunk/sw/ |
| 53 |
Updated the #include/#define directives to work properly for nested includes.
(They were supposed to work properly for nested includes before ... and didn't)
This fixes those bugs. |
dgisselq |
3110d 18h |
/zipcpu/trunk/sw/ |
| 52 |
Added the capability to "see" character's encoded within a binary file,
by printing the character value(s) of each opcode (if they are printable)
on each line. |
dgisselq |
3110d 18h |
/zipcpu/trunk/sw/ |
| 51 |
Added the capability to look at binary files and 'see' characters as they
are encoded in memory. |
dgisselq |
3110d 18h |
/zipcpu/trunk/sw/ |
| 46 |
A series of updates associated with getting Dhrystone to work. Includes
updates to getting multiple files to link/work together within the assembler,
as well as getting quoted quotations to work in the lexer, and better
include file support in the preprocessor. |
dgisselq |
3120d 10h |
/zipcpu/trunk/sw/ |
| 45 |
Library routines for 32-bit multiply and divide, both signed and unsigned. |
dgisselq |
3120d 10h |
/zipcpu/trunk/sw/ |
| 44 |
?? |
dgisselq |
3120d 10h |
/zipcpu/trunk/sw/ |
| 39 |
Here's the documentation update to support the pipelined read/writes of
the bus from the CPU, as well as the test file that proved they worked. |
dgisselq |
3123d 13h |
/zipcpu/trunk/sw/ |
| 36 |
*Lots* of changes to increase processing speed and remove pipeline stalls.
Removed the useless flash cache, replacing it with a proper DMA controller.
"make test" in the main directory now runs a test program in Verilator and
reports on the results. |
dgisselq |
3132d 18h |
/zipcpu/trunk/sw/ |
| 34 |
Bunches of changes, although very little changed with the core itself.
Regarding the core, some bugs were fixed within zipcpu.v (the CPU part of the
core), so that the debugger can change the program counter. The debugger
can now halt the CPU and then view, examine, and modify registers to include
the program counter, although live changes to the CC register have not been
tested.
There was also a bug in the stall handling of the wishbone bus delay line. This
has now been fixed.
Moving outwards to the system, some parameters have been added to zipsystem
to make it more configurable for whatever environment you might wish to place
it within. Other minor clean ups have taken place, mostly to the internal
documentation.
Lots of changes, though, to the assembler. The big one is the implementation
of #define macros, C style. Several buggy macros were in sys.i. These have
been fixed. The Makefile has been adjusted so that the build of test.S, which
depends upon sys.i, is now properly dependent upon sys.i for make purposes.
Further, not only will zpp, the assembler preprocessor, handle #define macros,
it will also recursive #defines. The assembler expression evaluator has also
been updated to properly handle both operator precedence, as well as modulo
arithmetic.
The master system test file, test.S, found in the sw/zasm directory has been
updated to reflect these new capabilities. (I really need to move it to the
bench/asm directory, so you may expect that change sometime later.) |
dgisselq |
3158d 13h |
/zipcpu/trunk/sw/ |
| 31 |
README now comments on the relationship between the debugger and the
test bench. (They came from the same code at one time ...) |
dgisselq |
3161d 21h |
/zipcpu/trunk/sw/ |
