OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [sw/] - Rev 113

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
113 Bug fix: the Makefile wasn't building gcc, and the binutils would not allocate
space for common variables or zero'd (bss) variables properly. Several binutils
bugs were fixed to get variables to be allocated properly. Those are
reflected in this updated patch.
dgisselq 2921d 21h /zipcpu/trunk/sw/
112 Removed some debugging code from the compiler. dgisselq 2924d 17h /zipcpu/trunk/sw/
111 Bug fix compiler update! This fixes a lot of the bugs associated with the
previous compiler release.
dgisselq 2924d 17h /zipcpu/trunk/sw/
110 The makefile no longer requires (or supports) building the obsolete machine
code test file optest.
dgisselq 2924d 17h /zipcpu/trunk/sw/
109 This file is now marked as obsolete. dgisselq 2924d 17h /zipcpu/trunk/sw/
105 Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC.
dgisselq 2940d 17h /zipcpu/trunk/sw/
104 An updated build script, actually builds zip-gcc. dgisselq 2941d 17h /zipcpu/trunk/sw/
103 A barely functional, but somewhat working, version of GCC to check in.
If the Lord is willing, it should be accompanied by a newlib port soon.
That port should move the GCC status from barely functional but somewhat
working to functional and working, although not (yet) complete.
dgisselq 2941d 22h /zipcpu/trunk/sw/
102 Updated bugfix version of the binutils patch, and a first patch of GCC.
The GCC patch is undergoing ongoing and active development. It is also known to
continue to contain active bugs. (It's not done yet.)
dgisselq 2944d 06h /zipcpu/trunk/sw/
101 Adjusted the "BREAK" instruction so that it will now disassemble properly
with an operand. This was necessary to create a (trap_if ...) instruction
for the GCC compiler.
dgisselq 2946d 09h /zipcpu/trunk/sw/
100 Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.)
dgisselq 2946d 09h /zipcpu/trunk/sw/
99 Added big-endian versus little-endian functionality. You can now specify which
your input file is as a command line parameter, and zdump will properly
disassemble the file.
dgisselq 2946d 09h /zipcpu/trunk/sw/
98 Added justed longjump instructions from the previous (not used, broken)
functionality to the new LOD (PC),PC functionality.
dgisselq 2946d 09h /zipcpu/trunk/sw/
97 Added longjump instructions. dgisselq 2946d 09h /zipcpu/trunk/sw/
96 Added the longjump functionality, so that the assembler will properly assemble
instructions to arbitrary 32-bit addresses.
dgisselq 2946d 09h /zipcpu/trunk/sw/
95 Fixed a bug whereby a mistaken code for CLR was masking a valid LDI of a large
integer value.
dgisselq 2948d 16h /zipcpu/trunk/sw/
94 These changes make it possible to build binutils-2.25/ here in this
directory. "make binutils" should be all that is necessary to build the
entire binutils package for the Zip CPU.

The default configure script, run from gas-script.sh below, will build and
install these utilities in an install/ subdirectory made below sw/.
dgisselq 2973d 13h /zipcpu/trunk/sw/
93 A BINUTILS BACKEND IS NOW AVAILABLE!!!! dgisselq 2981d 10h /zipcpu/trunk/sw/
89 Minor changes, to include making default branching an ADD.[condition] X,PC
instruction, rather than allowing both MOV X(PC),PC and ADD X,PC instructions.

Further zopcodes.cpp contains several bug fixes.
dgisselq 2981d 11h /zipcpu/trunk/sw/
70 Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes.
dgisselq 3012d 12h /zipcpu/trunk/sw/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.