OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [sw/] - Rev 94

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
94 These changes make it possible to build binutils-2.25/ here in this
directory. "make binutils" should be all that is necessary to build the
entire binutils package for the Zip CPU.

The default configure script, run from gas-script.sh below, will build and
install these utilities in an install/ subdirectory made below sw/.
dgisselq 2296d 00h /zipcpu/trunk/sw/
93 A BINUTILS BACKEND IS NOW AVAILABLE!!!! dgisselq 2303d 22h /zipcpu/trunk/sw/
89 Minor changes, to include making default branching an ADD.[condition] X,PC
instruction, rather than allowing both MOV X(PC),PC and ADD X,PC instructions.

Further zopcodes.cpp contains several bug fixes.
dgisselq 2303d 22h /zipcpu/trunk/sw/
70 Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes.
dgisselq 2334d 23h /zipcpu/trunk/sw/
69 This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture.
dgisselq 2341d 04h /zipcpu/trunk/sw/
60 Fixed assembler processing of jump instructions, so that the new fast
return instruction can be used. The test file was modified to test
pipelined value passing within the CPU. That's where the value gets
(re)used before being stored back in the register file. As of this release,
all tests work.
dgisselq 2402d 04h /zipcpu/trunk/sw/
59 Adjusted these library routines to use the new stack frame and calling
conventions.
dgisselq 2402d 04h /zipcpu/trunk/sw/
55 A test was added to double check whether carry following right shifts worked.
This was a necessary part of getting two cycle linear feedback shift register
operations working for a memory test on a XuLA2 board. With this, I can now
verify that such feedback registers work for pseudorandom number purposes.
dgisselq 2412d 07h /zipcpu/trunk/sw/
54 This builds on the support for backslash character escapes in both single
and multicharacter expressions. Backslash character escapes are now
possible with quotations and backslashes, and the same code to interpret
the escapes is applied to both single and multicharacter sequences.
dgisselq 2412d 07h /zipcpu/trunk/sw/
53 Updated the #include/#define directives to work properly for nested includes.
(They were supposed to work properly for nested includes before ... and didn't)
This fixes those bugs.
dgisselq 2412d 07h /zipcpu/trunk/sw/
52 Added the capability to "see" character's encoded within a binary file,
by printing the character value(s) of each opcode (if they are printable)
on each line.
dgisselq 2412d 07h /zipcpu/trunk/sw/
51 Added the capability to look at binary files and 'see' characters as they
are encoded in memory.
dgisselq 2412d 07h /zipcpu/trunk/sw/
46 A series of updates associated with getting Dhrystone to work. Includes
updates to getting multiple files to link/work together within the assembler,
as well as getting quoted quotations to work in the lexer, and better
include file support in the preprocessor.
dgisselq 2421d 22h /zipcpu/trunk/sw/
45 Library routines for 32-bit multiply and divide, both signed and unsigned. dgisselq 2421d 22h /zipcpu/trunk/sw/
44 ?? dgisselq 2421d 22h /zipcpu/trunk/sw/
39 Here's the documentation update to support the pipelined read/writes of
the bus from the CPU, as well as the test file that proved they worked.
dgisselq 2425d 01h /zipcpu/trunk/sw/
36 *Lots* of changes to increase processing speed and remove pipeline stalls.

Removed the useless flash cache, replacing it with a proper DMA controller.

"make test" in the main directory now runs a test program in Verilator and
reports on the results.
dgisselq 2434d 07h /zipcpu/trunk/sw/
34 Bunches of changes, although very little changed with the core itself.

Regarding the core, some bugs were fixed within zipcpu.v (the CPU part of the
core), so that the debugger can change the program counter. The debugger
can now halt the CPU and then view, examine, and modify registers to include
the program counter, although live changes to the CC register have not been
tested.

There was also a bug in the stall handling of the wishbone bus delay line. This
has now been fixed.

Moving outwards to the system, some parameters have been added to zipsystem
to make it more configurable for whatever environment you might wish to place
it within. Other minor clean ups have taken place, mostly to the internal
documentation.

Lots of changes, though, to the assembler. The big one is the implementation
of #define macros, C style. Several buggy macros were in sys.i. These have
been fixed. The Makefile has been adjusted so that the build of test.S, which
depends upon sys.i, is now properly dependent upon sys.i for make purposes.
Further, not only will zpp, the assembler preprocessor, handle #define macros,
it will also recursive #defines. The assembler expression evaluator has also
been updated to properly handle both operator precedence, as well as modulo
arithmetic.

The master system test file, test.S, found in the sw/zasm directory has been
updated to reflect these new capabilities. (I really need to move it to the
bench/asm directory, so you may expect that change sometime later.)
dgisselq 2460d 01h /zipcpu/trunk/sw/
31 README now comments on the relationship between the debugger and the
test bench. (They came from the same code at one time ...)
dgisselq 2463d 09h /zipcpu/trunk/sw/
29 Not sure what this file was, but it isn't a part of the project anymore. dgisselq 2463d 18h /zipcpu/trunk/sw/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.