OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [sw/] [zasm/] [zopcodes.cpp] - Rev 89

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
89 Minor changes, to include making default branching an ADD.[condition] X,PC
instruction, rather than allowing both MOV X(PC),PC and ADD X,PC instructions.

Further zopcodes.cpp contains several bug fixes.
dgisselq 2440d 16h /zipcpu/trunk/sw/zasm/zopcodes.cpp
70 Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes.
dgisselq 2471d 17h /zipcpu/trunk/sw/zasm/zopcodes.cpp
69 This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture.
dgisselq 2477d 22h /zipcpu/trunk/sw/zasm/zopcodes.cpp
51 Added the capability to look at binary files and 'see' characters as they
are encoded in memory.
dgisselq 2549d 00h /zipcpu/trunk/sw/zasm/zopcodes.cpp
46 A series of updates associated with getting Dhrystone to work. Includes
updates to getting multiple files to link/work together within the assembler,
as well as getting quoted quotations to work in the lexer, and better
include file support in the preprocessor.
dgisselq 2558d 16h /zipcpu/trunk/sw/zasm/zopcodes.cpp
26 Added signed and unsigned multiply opcodes to the assembler.

An opcode was added for a 'negate' instruction. This is a derived instruction
that turns into two instructions. Neg RX becomes an XOR -1,Rx followed by an
Add 1,Rx command. (Move 1+Rx,Rx would've stalled the bus by one cycle.)

Instructions now keep track of the source linenumber (but not yet filename)
where they were issued. That way, upon an error in linking at the end, the
instruction can be referenced by the proper line number. (Filenames are still
not implemented, hence include files may reference the line number of the
include file with no proper indication of that ... yet).

The OBJFILE intrface now supports a clos() function. This allows the
assembler to close and delete the object file for those cases where the
preprocessor encounters an error.

The master test file, sw/test.S, was adjuted as follows: many of the tests
within it can be separated by #ifdef lines. Hence, if you only wish to test
whether or not CARRY works, undefine all of the other ifdefs but leave the
CARRY_TEST defined. (PUSH_TEST, a test of the PUSH(RX,SP) macro, still doesn't
work because the assembler still doesn't implement macros. This is still a
coming feature.)

The master test file now has tests for the break function, as well as for the
new trap CC bit and the new multiply signed and unsigned instructions in the
ALU.

Many error conditions were added to the assembler preprocessor. Now, if an
EOF is encountered in anything but the INITIAL state (not within a macro),
an error will be created. Likewise, any unrecognized preprocessor directive
will create an error.

The lexical analyzer now supports character values, such as 'a' or '\n' using
a C-type syntax. (Tri-graphs are not supported.) It also supports such
extended syntax as '$GPG'. (Hmm ... wonder why I needed that?)

The lexical analyzer now recognizes and properly supports #line preprocessor
output statements. Theselines are then used to track what source line errors
occurr at.

Operand precedence has been adjusted, so the assembler should be able to
properly handle things like 5+3*8 and get the same number answer as 3*8+5.
(This has been implemented, although not thoroughly tested.)

Upon completion of any preprocessing file, the assembler now checks the status
of the preprocessor as returned by its exit code. Anything other than a zero
status will cause the assembler to delete the resulting object code file it is
building and exit with an error.

The assembler also supports the '-d' command line flag to turn on debugging in
the yacc processor (setting yydebug). It'll produce a lot of debugging output,
but it just might help to figure out what 'syntax error' is actually taking
place.
dgisselq 2600d 12h /zipcpu/trunk/sw/zasm/zopcodes.cpp
17 The ZOPCODES function zipi_to_string (ZIP CPU instruction to string, part of
the machine code dump) was adjusted to have closer to a fixed width output.
It no longer uses tab characters, which can have an unreliable effect.
dgisselq 2606d 13h /zipcpu/trunk/sw/zasm/zopcodes.cpp
13 Finally! The beginnings of the new assembler. It's not really polished yet,
and it is quite clunky, but it works!! (Lots of bugs and features left to
fix/implement: #include, #define macro(), #line tracking through the
preprocessor, a means of finding include files (and the preprocessor!) and
more. But, as a beginning, the basics are functinoal.
dgisselq 2610d 02h /zipcpu/trunk/sw/zasm/zopcodes.cpp
8 Fixed the rotate left instruction to work in the zasm parser, and to be
properly referenced in the simulator. The instruction set documentation was
also adjusted to reflect what the CPU actually does.
dgisselq 2625d 22h /zipcpu/trunk/sw/zasm/zopcodes.cpp
2 An initial load. No promises of what works or not, but this is where the
project is at.
dgisselq 2626d 16h /zipcpu/trunk/sw/zasm/zopcodes.cpp

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.