OpenCores

SATA 2 HOST Controller :: Overview

Project maintainers

Details

Name: sata2_host_controller
Created: Oct 11, 2017
Updated: Oct 15, 2017
SVN: No files checked in

Other project properties

Category: Communication controller
Language: Verilog
Development status: Beta
Additional info: none
WishBone compliant: No
WishBone version: n/a
License: LGPL

Description

The Controller has to write and read to a SATA2 hard disk drive (HDD)/ solid state drive (SSD) from a logic module inside an FPGA without a micro controller and driver software. Which supports SATA1(1.5 Gbps)/SATA2 (3 Gbps) data transfer rates.
High speed data transfer from an FPGA to a non-volatile mass storage device like HDD/SSD became a reality by this project.
A re-usable test environment based on microblaze processor for real time hardware testing of FPGA modules (written in VHDL/Verilog) also developed as part of the project validation.
Xilinx Virtex-5 ML506 development board was used for the development.

The entire repository is already uploaded to githutb. please download from there.
https://github.com/shameerpt/sata_2_host_controller


© copyright 1999-2017 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.