OpenCores
URL https://opencores.org/ocsvn/connect-6/connect-6/trunk

Subversion Repositories connect-6

[/] [connect-6/] [trunk/] [XILINX/] [BUILD_SCC_SRCH/] [SP6/] [DE2.v] - Blame information for rev 17

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 17 sumanta.ch
 
2
module DE2
3
        (
4
                ////////////////////    Clock Input             ////////////////////     
5
                //OSC_27,                                                       //      27 MHz
6
                //OSC_50,                                                       //      50 MHz
7
 
8
        // Master clock input (muxed from many sources)
9
                SYSCLK_P, SYSCLK_N,
10
                EXT_CLOCK,                                              //      External Clock
11
                ////////////////////    Push Button             ////////////////////
12
                KEY,                                                    //      Button[3:0]
13
                ////////////////////    DPDT Switch             ////////////////////
14
                DPDT_SW,                                                //      DPDT Switch[17:0]
15
                ////////////////////    7-SEG Dispaly   ////////////////////
16
                HEX0,                                                   //      Seven Segment Digital 0
17
                HEX1,                                                   //      Seven Segment Digital 1
18
                HEX2,                                                   //      Seven Segment Digital 2
19
                HEX3,                                                   //      Seven Segment Digital 3
20
                HEX4,                                                   //      Seven Segment Digital 4
21
                HEX5,                                                   //      Seven Segment Digital 5
22
                HEX6,                                                   //      Seven Segment Digital 6
23
                HEX7,                                                   //      Seven Segment Digital 7
24
                ////////////////////////        LED             ////////////////////////
25
                LED_GREEN,                                              //      LED Green[8:0]
26
                LED_RED,                                                //      LED Red[17:0]
27
                ////////////////////////        UART    ////////////////////////
28
                UART_TXD,                                               //      UART Transmitter
29
                UART_RXD,                                               //      UART Rceiver
30
                TD_RESET
31
 
32
        );
33
 
34
////////////////////////        Clock Input             ////////////////////////
35
//input                 OSC_27;                                 //      27 MHz
36
//input                 OSC_50;                                 //      50 MHz
37
input                   SYSCLK_P, SYSCLK_N;
38
input                   EXT_CLOCK;                              //      External Clock
39
////////////////////////        Push Button             ////////////////////////
40
input   [3:0]    KEY;                                    //      Button[3:0]
41
////////////////////////        DPDT Switch             ////////////////////////
42
input   [17:0]   DPDT_SW;                                //      DPDT Switch[17:0]
43
////////////////////////        7-SEG Dispaly   ////////////////////////
44
output  [6:0]    HEX0;                                   //      Seven Segment Digital 0
45
output  [6:0]    HEX1;                                   //      Seven Segment Digital 1
46
output  [6:0]    HEX2;                                   //      Seven Segment Digital 2
47
output  [6:0]    HEX3;                                   //      Seven Segment Digital 3
48
output  [6:0]    HEX4;                                   //      Seven Segment Digital 4
49
output  [6:0]    HEX5;                                   //      Seven Segment Digital 5
50
output  [6:0]    HEX6;                                   //      Seven Segment Digital 6
51
output  [6:0]    HEX7;                                   //      Seven Segment Digital 7
52
////////////////////////////    LED             ////////////////////////////
53
output  [8:0]    LED_GREEN;                              //      LED Green[8:0]
54
output  [17:0]   LED_RED;                                //      LED Red[17:0]
55
////////////////////////////    UART    ////////////////////////////
56
output                  UART_TXD;                               //      UART Transmitter
57
input                   UART_RXD;                               //      UART Rceiver
58
output TD_RESET;
59
//      USB JTAG
60
wire [7:0] mRXD_DATA,mTXD_DATA;
61
wire mRXD_Ready,mTXD_Done,mTXD_Start;
62
wire mTCK;
63
//      SEG7
64
wire [31:0] mSEG7_DIG;
65
//      AI
66
wire [63:0] DATA_from_AI,DATA_to_AI;
67
wire mAI_Start,mAI_Done;
68
wire [7:0] mCOLOR;
69
 
70
//------- Clocks -------
71
wire                    clk200, clk20, clk50, proc_clk, clk125; // GCLK's
72
wire                    mcbclk_2x_0, mcbclk_2x_180, mcbclk_pll_lock, calib_clk; // MCB sigs
73
wire                    clk125_rx; // receive clock from PHY
74
wire                    clk125_rx_bufio;
75
wire PHY_RXCLK;
76
assign                  clk50=calib_clk;
77
 
78
SP605_BRD_CLOCKS //#(.PROC_CLK_FREQ(proc_clk_freq))
79
clocks (
80
        .SYSCLK_P(SYSCLK_P), .SYSCLK_N(SYSCLK_N),
81
        .CLK20(clk20),
82
        .CLK200(clk200),
83
        .CLK125(clk125),
84
        .PROC_CLK(proc_clk),
85
        .MCBCLK_2X_0(mcbclk_2x_0), .MCBCLK_2X_180(mcbclk_2x_180), .MCBCLK_PLL_LOCK(mcbclk_pll_lock), .CALIB_CLK(calib_clk),
86
        .PHY_RXCLK(PHY_RXCLK), .CLK125_RX(clk125_rx), .CLK125_RX_BUFIO(clk125_rx_bufio),
87
        .RST(KEY[0])
88
        );
89
wire                    OSC_27;                                 //      27 MHz
90
wire                    OSC_50;                                 //      50 MHz
91
assign OSC_50 =clk20;
92
//------- Clocks -------
93
assign TD_RESET = 1'b1;
94
 
95
 
96
 
97
 
98
SEG7_LUT_8                      u0      (       HEX0,HEX1,HEX2,HEX3,HEX4,HEX5,HEX6,HEX7,mSEG7_DIG );
99
 
100
wire mTXD_Done_not;
101
RS232_Controller        u1_bis(         .iDATA(mTXD_DATA),.iTxD_Start(mTXD_Start),.oTxD_Busy(mTXD_Done_not),
102
                                                        .oDATA(mRXD_DATA),.oRxD_Ready(mRXD_Ready),.iCLK(OSC_50),.RST_n(KEY[0]),
103
                                                        .oTxD(UART_TXD),.iRxD(UART_RXD));
104
//RS232_Controller      u1_bis(         .iDATA(8'b00101011),.iTxD_Start(1'b1),.oTxD_Busy(mTXD_Done_not),
105
//                                                      .oDATA(mRXD_DATA),.oRxD_Ready(mRXD_Ready),.iCLK(OSC_50),.RST_n(KEY[0]),
106
//                                                      .oTxD(UART_TXD),.iRxD(UART_RXD));
107
assign mTXD_Done = !mTXD_Done_not;
108
assign LED_RED[9] = mTXD_Done_not;
109
 
110
//assign LED_RED[10] = ~mAI_Done;
111
assign LED_RED[10]=~UART_RXD;
112
assign LED_RED[11]=~UART_TXD;
113
assign LED_RED[12]=KEY[0];
114
//assign mRXD_DATA=LED_RED[12];
115
 
116
wire rst=!(KEY[0]);
117
 
118
assign UART_RXD_JP1_7 = UART_RXD;
119
assign UART_TXD_JP1_50 = UART_TXD;
120
 
121
wire [63:0] CMD_Tmp;
122
 
123
CMD_Decode                      u5      (       //      USB JTAG
124
                                                        .iRXD_DATA(mRXD_DATA),.iRXD_Ready(mRXD_Ready),
125
                                                        .oTXD_DATA(mTXD_DATA),.oTXD_Start(mTXD_Start),.iTXD_Done(mTXD_Done),
126
                                                        //      Control
127
                                                        .iCLK(OSC_50),.iRST_n(rst), .oAI_RSTn(mAI_RSTn),
128
                                                        //AI
129
                                                        .oAI_DATA(DATA_to_AI),
130
                                                        .iAI_DATA(DATA_from_AI),
131
                                                        .oAI_Start(mAI_Start),
132
                                                        .iAI_Done(mAI_Done),.oCOLOR(mCOLOR),.d_cmd(CMD_Tmp[16:0]) );
133
 
134
//CMD_Decode                    u5      (       //      USB JTAG
135
//                                                      .iRXD_DATA(mRXD_DATA),.iRXD_Ready(mRXD_Ready),
136
//                                                      .oTXD_DATA(mTXD_DATA),.oTXD_Start(mTXD_Start),.iTXD_Done(mTXD_Done),
137
//                                                      //      Control
138
//                                                      .iCLK(OSC_50),.iRST_n(rst), .oAI_RSTn(mAI_RSTn),
139
//                                                      //AI
140
//                                                      .oAI_DATA(DATA_to_AI),
141
//                                                      .iAI_DATA(DATA_from_AI),
142
//                                                      .oAI_Start(mAI_Start),
143
//                                                      .iAI_Done(KEY[1]),.oCOLOR(mCOLOR),.d_cmd(CMD_Tmp[16:0]) );
144
AI                      inst_AI (
145
                                                        .oAI_DATA(DATA_from_AI),
146
                                                        .iAI_DATA(DATA_to_AI),
147
                                                        .iCOLOR(mCOLOR),
148
                                                        .imovecount(CMD_Tmp[16:0]),
149
                                                        .iAI_Start(mAI_Start),
150
                                                        .oAI_Done(mAI_Done),
151
 
152
                                                        //      Control
153
                                                        .iCLK(OSC_50),.iRST_n(mAI_RSTn) );
154
 
155
//assign        mSEG7_DIG       =       {       CMD_Tmp[31:28],CMD_Tmp[27:24],CMD_Tmp[23:20],CMD_Tmp[19:16],
156
//                                                      CMD_Tmp[15:12],CMD_Tmp[11:8],CMD_Tmp[7:4],CMD_Tmp[3:0]  };
157
assign  mSEG7_DIG       =       {
158
//                                                      DATA_to_AI[63:60],DATA_to_AI[59:56],DATA_to_AI[55:52],DATA_to_AI[51:48],
159
//                                                      DATA_to_AI[47:44],DATA_to_AI[43:40],DATA_to_AI[39:36],DATA_to_AI[35:32] }
160
                                                        DATA_from_AI[31:28],DATA_from_AI[27:24],DATA_from_AI[23:20],DATA_from_AI[19:16],
161
                                                        DATA_from_AI[15:12],DATA_from_AI[11:8],DATA_from_AI[7:4],DATA_from_AI[3:0]       }
162
                                ;
163
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.