URL https://opencores.org/ocsvn/hf-risc/hf-risc/trunk

Subversion Repositories hf-risc

[/] [hf-risc/] [trunk/] [hf-risc/] [ucore/] [datapath.vhd] - Blame information for rev 13

Go to most recent revision | Details | Compare with Previous | View Log


library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.std_logic_arith.all;
 
entity datapath is
        port (  clock:          in std_logic;
                reset:          in std_logic;
 
                stall:          in std_logic;
                busy:           in std_logic;
 
                irq_vector:     in std_logic_vector(31 downto 0);
                irq:            in std_logic;
                irq_ack:        out std_logic;
 
                inst_addr:      out std_logic_vector(31 downto 0);
                inst_in:        in std_logic_vector(31 downto 0);
 
                data_addr:      out std_logic_vector(31 downto 0);
                data_in:        in std_logic_vector(31 downto 0);
                data_out:       out std_logic_vector(31 downto 0);
                data_w:         out std_logic_vector(3 downto 0);
                data_access:    out std_logic
        );
end datapath;
 
architecture arch_datapath of datapath is
-- datapath signals
        signal data_in_s, pc, pc_last, pc_plus4, pc_next, result, branch, jump, ext32, ext32b, ext32h, alu_src: std_logic_vector(31 downto 0);
        signal opcode, funct: std_logic_vector(5 downto 0);
        signal read_reg1, read_reg2, write_reg, rs, rt, rd, target: std_logic_vector(4 downto 0);
        signal write_data, read_data1, read_data2: std_logic_vector(31 downto 0);
        signal imm: std_logic_vector(15 downto 0);
        signal wreg, zero, less_than, br_link_ctl, branch_taken, branch_taken_dly, jump_taken, jump_taken_dly, stall_reg: std_logic;
        signal irq_ack_s, irq_ack_s_dly, bds: std_logic;
 
-- control signals
        signal reg_dst_ctl, reg_write_ctl, alu_src_ctl, reg_to_mem_ctl, mem_to_reg_ctl, mem_to_reg_ctl_dly, signed_imm_ctl, signed_rd_ctl, shift_ctl: std_logic;
        signal jump_ctl, mem_read_ctl, mem_write_ctl: std_logic_vector(1 downto 0);
        signal branch_ctl: std_logic_vector(2 downto 0);
        signal alu_op_ctl: std_logic_vector(3 downto 0);
 
 
        signal reg_dst_ctl_r, reg_write_ctl_r, alu_src_ctl_r, reg_to_mem_ctl_r, mem_to_reg_ctl_r, signed_imm_ctl_r, signed_rd_ctl_r, shift_ctl_r, br_link_ctl_r: std_logic;
        signal jump_ctl_r, mem_read_ctl_r, mem_write_ctl_r: std_logic_vector(1 downto 0);
        signal branch_ctl_r: std_logic_vector(2 downto 0);
        signal alu_op_ctl_r: std_logic_vector(3 downto 0);
        signal rs_r, rt_r, rd_r: std_logic_vector(4 downto 0);
        signal imm_r: std_logic_vector(15 downto 0);
begin
 
--
-- FETCH STAGE
--
-- 1st stage, instruction memory access, PC update, interrupt acknowledge logic
 
        -- program counter logic
        process(clock, reset, reg_to_mem_ctl_r, mem_to_reg_ctl_r, busy, stall)
        begin
                if reset = '1' then
                        pc <= (others => '0');
                        pc_last <= (others => '0');
                elsif clock'event and clock = '1' then
                        if stall = '0' then
                                if busy = '0' then
                                        pc <= pc_next;
                                        pc_last <= pc;
                                else
                                        if (reg_to_mem_ctl_r = '1' or mem_to_reg_ctl_r = '1') and branch_taken_dly = '0' and jump_taken_dly = '0' then
                                                pc <= pc_last;
                                        end if;
                                end if;
                        end if;
                end if;
        end process;
 
        pc_plus4 <=     pc + 4;
 
        pc_next <=      irq_vector when irq = '1' and irq_ack_s = '1' else
                        branch when branch_taken = '1' else
                        jump when jump_taken = '1' else
                        pc_plus4;
 
        -- interrupt acknowledge logic
        irq_ack_s <= '1' when irq = '1' and
                bds = '0' and branch_taken = '0' and jump_taken = '0' and
                reg_to_mem_ctl_r = '0' and mem_to_reg_ctl_r = '0' else '0';
 
        irq_ack <= irq_ack_s_dly;
 
        process(clock, reset, irq, irq_ack_s, mem_to_reg_ctl_r, busy, stall)
        begin
                if reset = '1' then
                        irq_ack_s_dly <= '0';
                        bds <= '0';
                        branch_taken_dly <= '0';
                        jump_taken_dly <= '0';
                        mem_to_reg_ctl_dly <= '0';
                        stall_reg <= '0';
                elsif clock'event and clock = '1' then
                        stall_reg <= stall;
                        if stall = '0' then
                                mem_to_reg_ctl_dly <= mem_to_reg_ctl_r;
                                if busy = '0' then
                                        irq_ack_s_dly <= irq_ack_s;
                                        if branch_taken = '1' or jump_taken = '1' then
                                                bds <= '1';
                                        else
                                                bds <= '0';
                                        end if;
                                        branch_taken_dly <= branch_taken;
                                        jump_taken_dly <= jump_taken;
                                end if;
                        end if;
                end if;
        end process;
 
--
-- DECODE STAGE
--
-- 2nd stage, instruction decode, control unit operation, pipeline bubble insertion logic on load/store and 2nd branch delay slot
 
        -- instruction decode
        opcode <= inst_in(31 downto 26);
        rs <= inst_in(25 downto 21);
        rt <= inst_in(20 downto 16);
        rd <= "11111" when br_link_ctl = '1' else inst_in(15 downto 11);                                        -- FIXME: this will not work for the 'jalr rd, rs' format
        funct <= inst_in(5 downto 0);
        imm <= inst_in(15 downto 0);
 
        -- control unit
        control_hellfire: entity work.control
        port map(       opcode => opcode,
                        funct => funct,
                        rtx => rt,
                        reg_dst => reg_dst_ctl,
                        reg_write => reg_write_ctl,
                        alu_src => alu_src_ctl,
                        alu_op => alu_op_ctl,
                        jump => jump_ctl,
                        branch => branch_ctl,
                        br_link => br_link_ctl,
                        reg_to_mem => reg_to_mem_ctl,
                        mem_to_reg => mem_to_reg_ctl,
                        signed_imm => signed_imm_ctl,
                        mem_write => mem_write_ctl,
                        mem_read => mem_read_ctl,
                        signed_rd => signed_rd_ctl,
                        shift => shift_ctl
        );
 
        process(clock, reset, busy, stall)
        begin
                if reset = '1' then
                        rs_r <= (others => '0');
                        rt_r <= (others => '0');
                        rd_r <= (others => '0');
                        imm_r <= (others => '0');
                        reg_dst_ctl_r <= '0';
                        reg_write_ctl_r <= '0';
                        alu_src_ctl_r <= '0';
                        alu_op_ctl_r <= (others => '0');
                        jump_ctl_r <= (others => '0');
                        branch_ctl_r <= (others => '0');
                        br_link_ctl_r <= '0';
                        reg_to_mem_ctl_r <= '0';
                        mem_to_reg_ctl_r <= '0';
                        signed_imm_ctl_r <= '0';
                        mem_write_ctl_r <= "00";
                        mem_read_ctl_r <= "00";
                        signed_rd_ctl_r <= '0';
                        shift_ctl_r <= '0';
                elsif clock'event and clock = '1' then
                        if stall = '0' then
                                if irq_ack_s = '1' then
                                        rs_r <= (others => '0');
                                        rt_r <= (others => '0');
                                        rd_r <= (others => '0');
                                        imm_r <= (others => '0');
                                        reg_dst_ctl_r <= '0';
                                        reg_write_ctl_r <= '0';
                                        alu_src_ctl_r <= '0';
                                        alu_op_ctl_r <= (others => '0');
                                        jump_ctl_r <= (others => '0');
                                        branch_ctl_r <= (others => '0');
                                        br_link_ctl_r <= '0';
                                        reg_to_mem_ctl_r <= '0';
                                        mem_to_reg_ctl_r <= '0';
                                        signed_imm_ctl_r <= '0';
                                        mem_write_ctl_r <= "00";
                                        mem_read_ctl_r <= "00";
                                        signed_rd_ctl_r <= '0';
                                        shift_ctl_r <= '0';
                                else
                                        if busy = '0' then
                                                if reg_to_mem_ctl_r = '1' or mem_to_reg_ctl_r = '1' or branch_taken_dly = '1' or jump_taken_dly = '1' then
                                                        rs_r <= (others => '0');
                                                        rt_r <= (others => '0');
                                                        rd_r <= (others => '0');
                                                        imm_r <= (others => '0');
                                                        reg_dst_ctl_r <= '0';
                                                        reg_write_ctl_r <= '0';
                                                        alu_src_ctl_r <= '0';
                                                        alu_op_ctl_r <= (others => '0');
                                                        jump_ctl_r <= (others => '0');
                                                        branch_ctl_r <= (others => '0');
                                                        br_link_ctl_r <= '0';
                                                        reg_to_mem_ctl_r <= '0';
                                                        mem_to_reg_ctl_r <= '0';
                                                        signed_imm_ctl_r <= '0';
                                                        mem_write_ctl_r <= "00";
                                                        mem_read_ctl_r <= "00";
                                                        signed_rd_ctl_r <= '0';
                                                        shift_ctl_r <= '0';
                                                else
                                                        rs_r <= rs;
                                                        rt_r <= rt;
                                                        rd_r <= rd;
                                                        imm_r <= imm;
                                                        reg_dst_ctl_r <= reg_dst_ctl;
                                                        reg_write_ctl_r <= reg_write_ctl;
                                                        alu_src_ctl_r <= alu_src_ctl;
                                                        alu_op_ctl_r <= alu_op_ctl;
                                                        jump_ctl_r <= jump_ctl;
                                                        branch_ctl_r <= branch_ctl;
                                                        br_link_ctl_r <= br_link_ctl;
                                                        reg_to_mem_ctl_r <= reg_to_mem_ctl;
                                                        mem_to_reg_ctl_r <= mem_to_reg_ctl;
                                                        signed_imm_ctl_r <= signed_imm_ctl;
                                                        mem_write_ctl_r <= mem_write_ctl;
                                                        mem_read_ctl_r <= mem_read_ctl;
                                                        signed_rd_ctl_r <= signed_rd_ctl;
                                                        shift_ctl_r <= shift_ctl;
                                                end if;
                                        end if;
                                end if;
                        end if;
                end if;
        end process;
 
--
-- EXECUTE STAGE
--
 
-- 3rd stage (a) register file access (read)
        -- the register file
        register_bank: entity work.reg_bank
        port map(       clock => clock,
                        read_reg1 => read_reg1,
                        read_reg2 => read_reg2,
                        write_reg => write_reg,
                        wreg => wreg,
                        write_data => write_data,
                        read_data1 => read_data1,
                        read_data2 => read_data2
        );
 
        -- register file read/write selection and write enable
        read_reg1 <= rs_r when shift_ctl_r = '0' else rt_r;                                              -- source for shifts or normal operations
        read_reg2 <= "00000" when branch_ctl_r > "010" else                                             -- source for branch and link (for zero operations)
                        rs_r when shift_ctl_r = '1' else rt_r;                                          -- source for register based shifts or normal operations
        write_reg <= target when mem_to_reg_ctl_r = '0' else rt_r;
        ext32 <= x"0000" & imm_r when (imm_r(15) = '0' or signed_imm_ctl_r = '0') else x"ffff" & imm_r;
        target <= rt_r when reg_dst_ctl_r = '0' else rd_r;                                               -- target register selection
        wreg <= (reg_write_ctl_r or mem_to_reg_ctl_dly) and not busy and not stall_reg;                 -- enable the register bank for write back also
 
-- 3rd stage (b) ALU operation
        alu: entity work.alu
        port map(       op1 => read_data1,
                        op2 => alu_src,
                        alu_op => alu_op_ctl_r,
                        result => result,
                        zero => zero,
                        less_than => less_than
        );
 
        alu_src <= read_data2 when alu_src_ctl_r = '0' else ext32;
 
        branch <= (ext32(29 downto 0) & "00") + pc_last;
        jump <= read_data1 when jump_ctl_r = "10" else pc_last(31 downto 28) & rs_r & rt_r & imm_r & "00";
 
        branch_taken <= '1' when (zero = '1' and branch_ctl_r = "001") or                                               -- BEQ
                                (zero = '0' and branch_ctl_r = "010") or                                         -- BNE
                                ((zero = '1' or less_than = '1') and branch_ctl_r = "011") or                           -- BLEZ
                                ((zero = '0' and less_than = '0') and branch_ctl_r = "100") or                            -- BGTZ
                                ((zero = '0' and less_than = '1') and branch_ctl_r = "101") or                           -- BLTZ, BLTZAL
                                ((zero = '1' or less_than = '0') and branch_ctl_r = "110")                               -- BGEZ, BGEZAL
                                else '0';
        jump_taken <= '1' when jump_ctl_r /= "00" else '0';                                                              -- J, JAL, JR, JALR
 
        inst_addr <= pc;
        data_addr <= result; --result(31 downto 2) & "00";
        data_access <= '1' when reg_to_mem_ctl_r = '1' or mem_to_reg_ctl_r = '1' else '0';
 
 
-- 3rd stage (c) data memory / write back operation, register file access (write)
        -- memory access, store operations
        process(mem_write_ctl_r, result, read_data2)
        begin
                case mem_write_ctl_r is
                        when "11" =>                    -- store word
                                data_out <= read_data2;
                                data_w <= "1111";
                        when "01" =>                    -- store byte
                                data_out <= read_data2(7 downto 0) & read_data2(7 downto 0) & read_data2(7 downto 0) & read_data2(7 downto 0);
                                case result(1 downto 0) is
                                        when "11" => data_w <= "0001";
                                        when "10" => data_w <= "0010";
                                        when "01" => data_w <= "0100";
                                        when others => data_w <= "1000";
                                end case;
                        when "10" =>                    -- store half word
                                data_out <= read_data2(15 downto 0) & read_data2(15 downto 0);
                                case result(1) is
                                        when '1' => data_w <= "0011";
                                        when others => data_w <= "1100";
                                end case;
                        when others =>                  -- WTF??
                                data_out <= read_data2;
                                data_w <= "0000";
                end case;
        end process;
 
        -- memory access, load operations
        process(mem_read_ctl_r, result, data_in)
        begin
                case mem_read_ctl_r is
                        when "01" =>                    -- load byte
                                case result(1 downto 0) is
                                        when "11" => data_in_s <= x"000000" & data_in(7 downto 0);
                                        when "10" => data_in_s <= x"000000" & data_in(15 downto 8);
                                        when "01" => data_in_s <= x"000000" & data_in(23 downto 16);
                                        when others => data_in_s <= x"000000" & data_in(31 downto 24);
 
                                end case;
                        when "10" =>                    -- load half word
                                case result(1) is
                                        when '1' => data_in_s <= x"0000" & data_in(15 downto 0);
                                        when others => data_in_s <= x"0000" & data_in(31 downto 16);
                                end case;
                        when others =>                  -- load word
                                data_in_s <= data_in;
                end case;
        end process;
 
        -- write back
        ext32b <= x"000000" & data_in_s(7 downto 0) when (data_in_s(7) = '0' or signed_rd_ctl_r = '0') else x"ffffff" & data_in_s(7 downto 0);
        ext32h <= x"0000" & data_in_s(15 downto 0) when (data_in_s(15) = '0' or signed_rd_ctl_r = '0') else x"ffff" & data_in_s(15 downto 0);
 
        write_data <= data_in_s when mem_read_ctl_r = "11" else
                        ext32b when mem_read_ctl_r = "01" else
                        ext32h when mem_read_ctl_r = "10" else
                        pc when br_link_ctl_r = '1' else result;
 
end arch_datapath;
 

Browse

Tools

Subversion Repositories hf-risc

[/] [hf-risc/] [trunk/] [hf-risc/] [ucore/] [datapath.vhd] - Blame information for rev 13

Line No.	Rev	Author	Line
1	13	serginhofr	`library ieee;`
2			`use ieee.std_logic_1164.all;`
3			`use ieee.std_logic_unsigned.all;`
4			`use ieee.std_logic_arith.all;`
5
6			`entity datapath is`
7			`port ( clock: in std_logic;`
8			`reset: in std_logic;`
9
10			`stall: in std_logic;`
11			`busy: in std_logic;`
12
13			`irq_vector: in std_logic_vector(31 downto 0);`
14			`irq: in std_logic;`
15			`irq_ack: out std_logic;`
16
17			`inst_addr: out std_logic_vector(31 downto 0);`
18			`inst_in: in std_logic_vector(31 downto 0);`
19
20			`data_addr: out std_logic_vector(31 downto 0);`
21			`data_in: in std_logic_vector(31 downto 0);`
22			`data_out: out std_logic_vector(31 downto 0);`
23			`data_w: out std_logic_vector(3 downto 0);`
24			`data_access: out std_logic`
25			`);`
26			`end datapath;`
27
28			`architecture arch_datapath of datapath is`
29			`-- datapath signals`
30			`signal data_in_s, pc, pc_last, pc_plus4, pc_next, result, branch, jump, ext32, ext32b, ext32h, alu_src: std_logic_vector(31 downto 0);`
31			`signal opcode, funct: std_logic_vector(5 downto 0);`
32			`signal read_reg1, read_reg2, write_reg, rs, rt, rd, target: std_logic_vector(4 downto 0);`
33			`signal write_data, read_data1, read_data2: std_logic_vector(31 downto 0);`
34			`signal imm: std_logic_vector(15 downto 0);`
35			`signal wreg, zero, less_than, br_link_ctl, branch_taken, branch_taken_dly, jump_taken, jump_taken_dly, stall_reg: std_logic;`
36			`signal irq_ack_s, irq_ack_s_dly, bds: std_logic;`
37
38			`-- control signals`
39			`signal reg_dst_ctl, reg_write_ctl, alu_src_ctl, reg_to_mem_ctl, mem_to_reg_ctl, mem_to_reg_ctl_dly, signed_imm_ctl, signed_rd_ctl, shift_ctl: std_logic;`
40			`signal jump_ctl, mem_read_ctl, mem_write_ctl: std_logic_vector(1 downto 0);`
41			`signal branch_ctl: std_logic_vector(2 downto 0);`
42			`signal alu_op_ctl: std_logic_vector(3 downto 0);`
43
44
45			`signal reg_dst_ctl_r, reg_write_ctl_r, alu_src_ctl_r, reg_to_mem_ctl_r, mem_to_reg_ctl_r, signed_imm_ctl_r, signed_rd_ctl_r, shift_ctl_r, br_link_ctl_r: std_logic;`
46			`signal jump_ctl_r, mem_read_ctl_r, mem_write_ctl_r: std_logic_vector(1 downto 0);`
47			`signal branch_ctl_r: std_logic_vector(2 downto 0);`
48			`signal alu_op_ctl_r: std_logic_vector(3 downto 0);`
49			`signal rs_r, rt_r, rd_r: std_logic_vector(4 downto 0);`
50			`signal imm_r: std_logic_vector(15 downto 0);`
51			`begin`
52
53			`--`
54			`-- FETCH STAGE`
55			`--`
56			`-- 1st stage, instruction memory access, PC update, interrupt acknowledge logic`
57
58			`-- program counter logic`
59			`process(clock, reset, reg_to_mem_ctl_r, mem_to_reg_ctl_r, busy, stall)`
60			`begin`
61			`if reset = '1' then`
62			`pc <= (others => '0');`
63			`pc_last <= (others => '0');`
64			`elsif clock'event and clock = '1' then`
65			`if stall = '0' then`
66			`if busy = '0' then`
67			`pc <= pc_next;`
68			`pc_last <= pc;`
69			`else`
70			`if (reg_to_mem_ctl_r = '1' or mem_to_reg_ctl_r = '1') and branch_taken_dly = '0' and jump_taken_dly = '0' then`
71			`pc <= pc_last;`
72			`end if;`
73			`end if;`
74			`end if;`
75			`end if;`
76			`end process;`
77
78			`pc_plus4 <= pc + 4;`
79
80			`pc_next <= irq_vector when irq = '1' and irq_ack_s = '1' else`
81			`branch when branch_taken = '1' else`
82			`jump when jump_taken = '1' else`
83			`pc_plus4;`
84
85			`-- interrupt acknowledge logic`
86			`irq_ack_s <= '1' when irq = '1' and`
87			`bds = '0' and branch_taken = '0' and jump_taken = '0' and`
88			`reg_to_mem_ctl_r = '0' and mem_to_reg_ctl_r = '0' else '0';`
89
90			`irq_ack <= irq_ack_s_dly;`
91
92			`process(clock, reset, irq, irq_ack_s, mem_to_reg_ctl_r, busy, stall)`
93			`begin`
94			`if reset = '1' then`
95			`irq_ack_s_dly <= '0';`
96			`bds <= '0';`
97			`branch_taken_dly <= '0';`
98			`jump_taken_dly <= '0';`
99			`mem_to_reg_ctl_dly <= '0';`
100			`stall_reg <= '0';`
101			`elsif clock'event and clock = '1' then`
102			`stall_reg <= stall;`
103			`if stall = '0' then`
104			`mem_to_reg_ctl_dly <= mem_to_reg_ctl_r;`
105			`if busy = '0' then`
106			`irq_ack_s_dly <= irq_ack_s;`
107			`if branch_taken = '1' or jump_taken = '1' then`
108			`bds <= '1';`
109			`else`
110			`bds <= '0';`
111			`end if;`
112			`branch_taken_dly <= branch_taken;`
113			`jump_taken_dly <= jump_taken;`
114			`end if;`
115			`end if;`
116			`end if;`
117			`end process;`
118
119			`--`
120			`-- DECODE STAGE`
121			`--`
122			`-- 2nd stage, instruction decode, control unit operation, pipeline bubble insertion logic on load/store and 2nd branch delay slot`
123
124			`-- instruction decode`
125			`opcode <= inst_in(31 downto 26);`
126			`rs <= inst_in(25 downto 21);`
127			`rt <= inst_in(20 downto 16);`
128			`rd <= "11111" when br_link_ctl = '1' else inst_in(15 downto 11); -- FIXME: this will not work for the 'jalr rd, rs' format`
129			`funct <= inst_in(5 downto 0);`
130			`imm <= inst_in(15 downto 0);`
131
132			`-- control unit`
133			`control_hellfire: entity work.control`
134			`port map( opcode => opcode,`
135			`funct => funct,`
136			`rtx => rt,`
137			`reg_dst => reg_dst_ctl,`
138			`reg_write => reg_write_ctl,`
139			`alu_src => alu_src_ctl,`
140			`alu_op => alu_op_ctl,`
141			`jump => jump_ctl,`
142			`branch => branch_ctl,`
143			`br_link => br_link_ctl,`
144			`reg_to_mem => reg_to_mem_ctl,`
145			`mem_to_reg => mem_to_reg_ctl,`
146			`signed_imm => signed_imm_ctl,`
147			`mem_write => mem_write_ctl,`
148			`mem_read => mem_read_ctl,`
149			`signed_rd => signed_rd_ctl,`
150			`shift => shift_ctl`
151			`);`
152
153			`process(clock, reset, busy, stall)`
154			`begin`
155			`if reset = '1' then`
156			`rs_r <= (others => '0');`
157			`rt_r <= (others => '0');`
158			`rd_r <= (others => '0');`
159			`imm_r <= (others => '0');`
160			`reg_dst_ctl_r <= '0';`
161			`reg_write_ctl_r <= '0';`
162			`alu_src_ctl_r <= '0';`
163			`alu_op_ctl_r <= (others => '0');`
164			`jump_ctl_r <= (others => '0');`
165			`branch_ctl_r <= (others => '0');`
166			`br_link_ctl_r <= '0';`
167			`reg_to_mem_ctl_r <= '0';`
168			`mem_to_reg_ctl_r <= '0';`
169			`signed_imm_ctl_r <= '0';`
170			`mem_write_ctl_r <= "00";`
171			`mem_read_ctl_r <= "00";`
172			`signed_rd_ctl_r <= '0';`
173			`shift_ctl_r <= '0';`
174			`elsif clock'event and clock = '1' then`
175			`if stall = '0' then`
176			`if irq_ack_s = '1' then`
177			`rs_r <= (others => '0');`
178			`rt_r <= (others => '0');`
179			`rd_r <= (others => '0');`
180			`imm_r <= (others => '0');`
181			`reg_dst_ctl_r <= '0';`
182			`reg_write_ctl_r <= '0';`
183			`alu_src_ctl_r <= '0';`
184			`alu_op_ctl_r <= (others => '0');`
185			`jump_ctl_r <= (others => '0');`
186			`branch_ctl_r <= (others => '0');`
187			`br_link_ctl_r <= '0';`
188			`reg_to_mem_ctl_r <= '0';`
189			`mem_to_reg_ctl_r <= '0';`
190			`signed_imm_ctl_r <= '0';`
191			`mem_write_ctl_r <= "00";`
192			`mem_read_ctl_r <= "00";`
193			`signed_rd_ctl_r <= '0';`
194			`shift_ctl_r <= '0';`
195			`else`
196			`if busy = '0' then`
197			`if reg_to_mem_ctl_r = '1' or mem_to_reg_ctl_r = '1' or branch_taken_dly = '1' or jump_taken_dly = '1' then`
198			`rs_r <= (others => '0');`
199			`rt_r <= (others => '0');`
200			`rd_r <= (others => '0');`
201			`imm_r <= (others => '0');`
202			`reg_dst_ctl_r <= '0';`
203			`reg_write_ctl_r <= '0';`
204			`alu_src_ctl_r <= '0';`
205			`alu_op_ctl_r <= (others => '0');`
206			`jump_ctl_r <= (others => '0');`
207			`branch_ctl_r <= (others => '0');`
208			`br_link_ctl_r <= '0';`
209			`reg_to_mem_ctl_r <= '0';`
210			`mem_to_reg_ctl_r <= '0';`
211			`signed_imm_ctl_r <= '0';`
212			`mem_write_ctl_r <= "00";`
213			`mem_read_ctl_r <= "00";`
214			`signed_rd_ctl_r <= '0';`
215			`shift_ctl_r <= '0';`
216			`else`
217			`rs_r <= rs;`
218			`rt_r <= rt;`
219			`rd_r <= rd;`
220			`imm_r <= imm;`
221			`reg_dst_ctl_r <= reg_dst_ctl;`
222			`reg_write_ctl_r <= reg_write_ctl;`
223			`alu_src_ctl_r <= alu_src_ctl;`
224			`alu_op_ctl_r <= alu_op_ctl;`
225			`jump_ctl_r <= jump_ctl;`
226			`branch_ctl_r <= branch_ctl;`
227			`br_link_ctl_r <= br_link_ctl;`
228			`reg_to_mem_ctl_r <= reg_to_mem_ctl;`
229			`mem_to_reg_ctl_r <= mem_to_reg_ctl;`
230			`signed_imm_ctl_r <= signed_imm_ctl;`
231			`mem_write_ctl_r <= mem_write_ctl;`
232			`mem_read_ctl_r <= mem_read_ctl;`
233			`signed_rd_ctl_r <= signed_rd_ctl;`
234			`shift_ctl_r <= shift_ctl;`
235			`end if;`
236			`end if;`
237			`end if;`
238			`end if;`
239			`end if;`
240			`end process;`
241
242			`--`
243			`-- EXECUTE STAGE`
244			`--`
245
246			`-- 3rd stage (a) register file access (read)`
247			`-- the register file`
248			`register_bank: entity work.reg_bank`
249			`port map( clock => clock,`
250			`read_reg1 => read_reg1,`
251			`read_reg2 => read_reg2,`
252			`write_reg => write_reg,`
253			`wreg => wreg,`
254			`write_data => write_data,`
255			`read_data1 => read_data1,`
256			`read_data2 => read_data2`
257			`);`
258
259			`-- register file read/write selection and write enable`
260			`read_reg1 <= rs_r when shift_ctl_r = '0' else rt_r; -- source for shifts or normal operations`
261			`read_reg2 <= "00000" when branch_ctl_r > "010" else -- source for branch and link (for zero operations)`
262			`rs_r when shift_ctl_r = '1' else rt_r; -- source for register based shifts or normal operations`
263			`write_reg <= target when mem_to_reg_ctl_r = '0' else rt_r;`
264			`ext32 <= x"0000" & imm_r when (imm_r(15) = '0' or signed_imm_ctl_r = '0') else x"ffff" & imm_r;`
265			`target <= rt_r when reg_dst_ctl_r = '0' else rd_r; -- target register selection`
266			`wreg <= (reg_write_ctl_r or mem_to_reg_ctl_dly) and not busy and not stall_reg; -- enable the register bank for write back also`
267
268			`-- 3rd stage (b) ALU operation`
269			`alu: entity work.alu`
270			`port map( op1 => read_data1,`
271			`op2 => alu_src,`
272			`alu_op => alu_op_ctl_r,`
273			`result => result,`
274			`zero => zero,`
275			`less_than => less_than`
276			`);`
277
278			`alu_src <= read_data2 when alu_src_ctl_r = '0' else ext32;`
279
280			`branch <= (ext32(29 downto 0) & "00") + pc_last;`
281			`jump <= read_data1 when jump_ctl_r = "10" else pc_last(31 downto 28) & rs_r & rt_r & imm_r & "00";`
282
283			`branch_taken <= '1' when (zero = '1' and branch_ctl_r = "001") or -- BEQ`
284			`(zero = '0' and branch_ctl_r = "010") or -- BNE`
285			`((zero = '1' or less_than = '1') and branch_ctl_r = "011") or -- BLEZ`
286			`((zero = '0' and less_than = '0') and branch_ctl_r = "100") or -- BGTZ`
287			`((zero = '0' and less_than = '1') and branch_ctl_r = "101") or -- BLTZ, BLTZAL`
288			`((zero = '1' or less_than = '0') and branch_ctl_r = "110") -- BGEZ, BGEZAL`
289			`else '0';`
290			`jump_taken <= '1' when jump_ctl_r /= "00" else '0'; -- J, JAL, JR, JALR`
291
292			`inst_addr <= pc;`
293			`data_addr <= result; --result(31 downto 2) & "00";`
294			`data_access <= '1' when reg_to_mem_ctl_r = '1' or mem_to_reg_ctl_r = '1' else '0';`
295
296
297			`-- 3rd stage (c) data memory / write back operation, register file access (write)`
298			`-- memory access, store operations`
299			`process(mem_write_ctl_r, result, read_data2)`
300			`begin`
301			`case mem_write_ctl_r is`
302			`when "11" => -- store word`
303			`data_out <= read_data2;`
304			`data_w <= "1111";`
305			`when "01" => -- store byte`
306			`data_out <= read_data2(7 downto 0) & read_data2(7 downto 0) & read_data2(7 downto 0) & read_data2(7 downto 0);`
307			`case result(1 downto 0) is`
308			`when "11" => data_w <= "0001";`
309			`when "10" => data_w <= "0010";`
310			`when "01" => data_w <= "0100";`
311			`when others => data_w <= "1000";`
312			`end case;`
313			`when "10" => -- store half word`
314			`data_out <= read_data2(15 downto 0) & read_data2(15 downto 0);`
315			`case result(1) is`
316			`when '1' => data_w <= "0011";`
317			`when others => data_w <= "1100";`
318			`end case;`
319			`when others => -- WTF??`
320			`data_out <= read_data2;`
321			`data_w <= "0000";`
322			`end case;`
323			`end process;`
324
325			`-- memory access, load operations`
326			`process(mem_read_ctl_r, result, data_in)`
327			`begin`
328			`case mem_read_ctl_r is`
329			`when "01" => -- load byte`
330			`case result(1 downto 0) is`
331			`when "11" => data_in_s <= x"000000" & data_in(7 downto 0);`
332			`when "10" => data_in_s <= x"000000" & data_in(15 downto 8);`
333			`when "01" => data_in_s <= x"000000" & data_in(23 downto 16);`
334			`when others => data_in_s <= x"000000" & data_in(31 downto 24);`
335
336			`end case;`
337			`when "10" => -- load half word`
338			`case result(1) is`
339			`when '1' => data_in_s <= x"0000" & data_in(15 downto 0);`
340			`when others => data_in_s <= x"0000" & data_in(31 downto 16);`
341			`end case;`
342			`when others => -- load word`
343			`data_in_s <= data_in;`
344			`end case;`
345			`end process;`
346
347			`-- write back`
348			`ext32b <= x"000000" & data_in_s(7 downto 0) when (data_in_s(7) = '0' or signed_rd_ctl_r = '0') else x"ffffff" & data_in_s(7 downto 0);`
349			`ext32h <= x"0000" & data_in_s(15 downto 0) when (data_in_s(15) = '0' or signed_rd_ctl_r = '0') else x"ffff" & data_in_s(15 downto 0);`
350
351			`write_data <= data_in_s when mem_read_ctl_r = "11" else`
352			`ext32b when mem_read_ctl_r = "01" else`
353			`ext32h when mem_read_ctl_r = "10" else`
354			`pc when br_link_ctl_r = '1' else result;`
355
356			`end arch_datapath;`
357