Subversion Repositories oms8051mini

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  8051 data ram                                               ////

////                                                              ////

////  This file is part of the 8051 cores project                 ////

////  http://www.opencores.org/cores/oms8051mini/                 ////

////                                                              ////

////  Description                                                 ////

////   data ram                                                   ////

////                                                              ////

////  To Do:                                                      ////

////   nothing                                                    ////

////                                                              ////

////  Author(s):                                                  ////

////      - Simon Teran, simont@opencores.org                     ////

////      - Dinesh Annayya, dinesha@opencores.org                 ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////   v0.0 - Dinesh A, 5th Jan 2017

////        1. Active edge of reset changed from High to Low

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: not supported by cvs2svn $

// Revision 1.10  2003/06/20 13:36:37  simont

// ram modules added.

//

// Revision 1.9  2003/06/17 14:17:22  simont

// BIST signals added.

//

// Revision 1.8  2003/04/02 16:12:04  simont

// generic_dpram used

//

// Revision 1.7  2003/04/02 11:26:21  simont

// updating...

//

// Revision 1.6  2003/01/26 14:19:22  rherveille

// Replaced oc8051_ram by generic_dpram.

//

// Revision 1.5  2003/01/13 14:14:41  simont

// replace some modules

//

// Revision 1.4  2002/09/30 17:33:59  simont

// prepared header

//

//

`include "top_defines.v"

module oc8051_ram_top (clk,

                       resetn,

                       rd_addr,

                       rd_data,

                       wr_addr,

                       bit_addr,

                       wr_data,

                       wr,

                       bit_data_in,

                       bit_data_out

`ifdef OC8051_BIST

         ,

         scanb_rst,

         scanb_clk,

         scanb_si,

         scanb_so,

         scanb_en

`endif

                       );

// on-chip ram-size (2**ram_aw bytes)

parameter ram_aw = 8; // default 256 bytes

//

// clk          (in)  clock

// rd_addr      (in)  read addres [oc8051_ram_rd_sel.out]

// rd_data      (out) read data [oc8051_ram_sel.in_ram]

// wr_addr      (in)  write addres [oc8051_ram_wr_sel.out]

// bit_addr     (in)  bit addresable instruction [oc8051_decoder.bit_addr -r]

// wr_data      (in)  write data [oc8051_alu.des1]

// wr           (in)  write [oc8051_decoder.wr -r]

// bit_data_in  (in)  bit data input [oc8051_alu.desCy]

// bit_data_out (out)  bit data output [oc8051_ram_sel.bit_in]

//

input clk, wr, bit_addr, bit_data_in, resetn;

input [7:0] wr_data;

input [7:0] rd_addr, wr_addr;

output bit_data_out;

output [7:0] rd_data;

`ifdef OC8051_BIST

input   scanb_rst;

input   scanb_clk;

input   scanb_si;

output  scanb_so;

input   scanb_en;

`endif

// rd_addr_m    read address modified

// wr_addr_m    write address modified

// wr_data_m    write data modified

reg [7:0] wr_data_m;

reg [7:0] rd_addr_m, wr_addr_m;

wire       rd_en;

reg        bit_addr_r,

           rd_en_r;

reg  [7:0] wr_data_r;

wire [7:0] rd_data_m;

reg  [2:0] bit_select;

assign bit_data_out = rd_data[bit_select];

assign rd_data = rd_en_r ? wr_data_r: rd_data_m;

assign rd_en   = (rd_addr_m == wr_addr_m) & wr;

oc8051_ram_256x8_two_bist u_ram_idata(

                           .clk     ( clk        ),

                           .resetn     ( resetn        ),

                           .rd_addr ( rd_addr_m  ),

                           .rd_data ( rd_data_m  ),

                           .rd_en   ( !rd_en     ),

                           .wr_addr ( wr_addr_m  ),

                           .wr_data ( wr_data_m  ),

                           .wr_en   ( 1'b1       ),

                           .wr      ( wr         )

`ifdef OC8051_BIST

         ,

         .scanb_rst(scanb_rst),

         .scanb_clk(scanb_clk),

         .scanb_si(scanb_si),

         .scanb_so(scanb_so),

         .scanb_en(scanb_en)

`endif

                           );

always @(posedge clk or negedge resetn)

  if (resetn == 1'b0) begin

    bit_addr_r <= #1 1'b0;

    bit_select <= #1 3'b0;

  end else begin

    bit_addr_r <= #1 bit_addr;

    bit_select <= #1 rd_addr[2:0];

  end

always @(posedge clk or negedge resetn)

  if (resetn == 1'b0) begin

    rd_en_r    <= #1 1'b0;

    wr_data_r  <= #1 8'h0;

  end else begin

    rd_en_r    <= #1 rd_en;

    wr_data_r  <= #1 wr_data_m;

  end

always @(rd_addr or bit_addr)

  casex ( {bit_addr, rd_addr[7]} ) // synopsys full_case parallel_case

      2'b0?: rd_addr_m = rd_addr;

      2'b10: rd_addr_m = {4'b0010, rd_addr[6:3]};

      2'b11: rd_addr_m = {1'b1, rd_addr[6:3], 3'b000};

  endcase

always @(wr_addr or bit_addr_r)

  casex ( {bit_addr_r, wr_addr[7]} ) // synopsys full_case parallel_case

      2'b0?: wr_addr_m = wr_addr;

      2'b10: wr_addr_m = {8'h00, 4'b0010, wr_addr[6:3]};

      2'b11: wr_addr_m = {8'h00, 1'b1, wr_addr[6:3], 3'b000};

  endcase

always @(rd_data or bit_select or bit_data_in or wr_data or bit_addr_r)

  casex ( {bit_addr_r, bit_select} ) // synopsys full_case parallel_case

      4'b0_???: wr_data_m = wr_data;

      4'b1_000: wr_data_m = {rd_data[7:1], bit_data_in};

      4'b1_001: wr_data_m = {rd_data[7:2], bit_data_in, rd_data[0]};

      4'b1_010: wr_data_m = {rd_data[7:3], bit_data_in, rd_data[1:0]};

      4'b1_011: wr_data_m = {rd_data[7:4], bit_data_in, rd_data[2:0]};

      4'b1_100: wr_data_m = {rd_data[7:5], bit_data_in, rd_data[3:0]};

      4'b1_101: wr_data_m = {rd_data[7:6], bit_data_in, rd_data[4:0]};

      4'b1_110: wr_data_m = {rd_data[7], bit_data_in, rd_data[5:0]};

      4'b1_111: wr_data_m = {bit_data_in, rd_data[6:0]};

  endcase

endmodule