OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [OpenRISC_SIM_GCC/] [drivers/] [uart.c] - Blame information for rev 622

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 584 jeremybenn 
#include "board.h"
2 
#include "uart.h"
3 622 filepang 
#include "support.h"
4 584 jeremybenn 
 
5 622 filepang 
#ifdef UART_NUM_CORES
6 
const int UART_BASE_ADR[UART_NUM_CORES] = {UART0_BASE, UART1_BASE};
7 
const int UART_BAUDS[UART_NUM_CORES] = {UART0_BAUD_RATE, UART1_BAUS_RATE};
8 
#else
9 
const int UART_BASE_ADR[1] = {UART0_BASE};
10 
const int UART_BAUDS[1] = {UART0_BAUD_RATE};
11 
#endif
12 
 
13 584 jeremybenn 
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
14 
 
15 622 filepang 
#define WAIT_FOR_XMITR(core)                    \
16 584 jeremybenn 
        do { \
17 622 filepang 
                lsr = REG8(UART_BASE_ADR[core] + UART_LSR); \
18 584 jeremybenn 
        } while ((lsr & BOTH_EMPTY) != BOTH_EMPTY)
19 
 
20 622 filepang 
#define WAIT_FOR_THRE(core)                     \
21 584 jeremybenn 
        do { \
22 622 filepang 
                lsr = REG8(UART_BASE_ADR[core] + UART_LSR); \
23 584 jeremybenn 
        } while ((lsr & UART_LSR_THRE) != UART_LSR_THRE)
24 
 
25 622 filepang 
#define CHECK_FOR_CHAR(core) (REG8(UART_BASE_ADR[core] + UART_LSR) & UART_LSR_DR)
26 584 jeremybenn 
 
27 622 filepang 
#define WAIT_FOR_CHAR(core)                     \
28 584 jeremybenn 
         do { \
29 622 filepang 
                lsr = REG8(UART_BASE_ADR[core] + UART_LSR); \
30 584 jeremybenn 
         } while ((lsr & UART_LSR_DR) != UART_LSR_DR)
31 
 
32 622 filepang 
void uart_init(int core)
33 
{
34 584 jeremybenn 
        int divisor;
35 622 filepang 
        float float_divisor;
36 584 jeremybenn 
 
37 
        /* Reset receiver and transmiter */
38 622 filepang 
        REG8(UART_BASE_ADR[core] + UART_FCR) = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_14;
39 584 jeremybenn 
 
40 622 filepang 
        /* Disable all interrupts */
41 
        REG8(UART_BASE_ADR[core] + UART_IER) = 0x00;
42 
 
43 584 jeremybenn 
        /* Set 8 bit char, 1 stop bit, no parity */
44 622 filepang 
        REG8(UART_BASE_ADR[core] + UART_LCR) = UART_LCR_WLEN8 & ~(UART_LCR_STOP | UART_LCR_PARITY);
45 584 jeremybenn 
 
46 
        /* Set baud rate */
47 622 filepang 
        float_divisor = (float) IN_CLK/(16 * UART_BAUDS[core]);
48 
        float_divisor += 0.50f; // Ensure round up
49 
        divisor = (int) float_divisor;
50 584 jeremybenn 
 
51 622 filepang 
        REG8(UART_BASE_ADR[core] + UART_LCR) |= UART_LCR_DLAB;
52 
        REG8(UART_BASE_ADR[core] + UART_DLL) = divisor & 0x000000ff;
53 
        REG8(UART_BASE_ADR[core] + UART_DLM) = (divisor >> 8) & 0x000000ff;
54 
        REG8(UART_BASE_ADR[core] + UART_LCR) &= ~(UART_LCR_DLAB);
55 
 
56 584 jeremybenn 
        return;
57 
}
58 
 
59 622 filepang 
void uart_putc(int core, char c)
60 
{
61 584 jeremybenn 
        unsigned char lsr;
62 
 
63 622 filepang 
        WAIT_FOR_THRE(core);
64 
        REG8(UART_BASE_ADR[core] + UART_TX) = c;
65 584 jeremybenn 
        if(c == '\n') {
66 622 filepang 
                WAIT_FOR_THRE(core);
67 
                REG8(UART_BASE_ADR[core] + UART_TX) = '\r';
68 584 jeremybenn 
        }
69 622 filepang 
        WAIT_FOR_XMITR(core);
70 584 jeremybenn 
}
71 
 
72 622 filepang 
// Only used when we know THRE is empty, typically in interrupt
73 
void uart_putc_noblock(int core, char c)
74 
{
75 
        REG8(UART_BASE_ADR[core] + UART_TX) = c;
76 
}
77 584 jeremybenn 
 
78 622 filepang 
char uart_getc(int core)
79 
{
80 584 jeremybenn 
        unsigned char lsr;
81 
        char c;
82 
 
83 622 filepang 
        WAIT_FOR_CHAR(core);
84 
        c = REG8(UART_BASE_ADR[core] + UART_RX);
85 584 jeremybenn 
        return c;
86 
}
87 
 
88 622 filepang 
char uart_getc_noblock(int core)
89 
{
90 
        char c;
91 
 
92 
        c = REG8(UART_BASE_ADR[core] + UART_RX);
93 
        return c;
94 
}
95 
 
96 
int uart_check_for_char(int core)
97 
{
98 
        return CHECK_FOR_CHAR(core);
99 
}
100 
 
101 
void uart_rxint_enable(int core)
102 
{
103 
        REG8(UART_BASE_ADR[core] + UART_IER) |= UART_IER_RDI;
104 
}
105 
 
106 
void uart_rxint_disable(int core)
107 
{
108 
        REG8(UART_BASE_ADR[core] + UART_IER) &= ~(UART_IER_RDI);
109 
}
110 
 
111 
void uart_txint_enable(int core)
112 
{
113 
        REG8(UART_BASE_ADR[core] + UART_IER) |= UART_IER_THRI;
114 
}
115 
 
116 
void uart_txint_disable(int core)
117 
{
118 
        REG8(UART_BASE_ADR[core] + UART_IER) &= ~(UART_IER_THRI);
119 
}
120 
 
121 
char uart_get_iir(int core)
122 
{
123 
        return REG8(UART_BASE_ADR[core] + UART_IIR);
124 
}
125 
 
126 
 
127 
char uart_get_lsr(int core)
128 
{
129 
        return REG8(UART_BASE_ADR[core] + UART_LSR);
130 
}
131 
 
132 
 
133 
char uart_get_msr(int core)
134 
{
135 
        return REG8(UART_BASE_ADR[core] + UART_MSR);
136 
}
137 
 
138 
 
139 
void uart_print_str(char *p)
140 
{
141 584 jeremybenn 
        while(*p != 0) {
142 622 filepang 
                uart_putc(0, *p);
143 584 jeremybenn 
                p++;
144 
        }
145 
}
146 
 
147 622 filepang 
void uart_print_int(int n)
148 
{
149 584 jeremybenn 
        int  a;
150 
        char c;
151 
        if (n<0) {
152 622 filepang 
                uart_putc(0, '-');
153 584 jeremybenn 
                n = -n;
154 
        }
155 
 
156 
        a = n/10;
157 621 filepang 
        if(a) uart_print_int(a);
158 584 jeremybenn 
 
159 
        c = '0' + (n % 10);
160 622 filepang 
        uart_putc(0, c);
161 584 jeremybenn 
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.