Subversion Repositories rtfbitmapcontroller

// ============================================================================

//        __

//   \\__/ o\    (C) 2012-2017  Robert Finch, Waterloo

//    \  __ /    All rights reserved.

//     \/_//     robfinch<remove>@finitron.ca

//       ||

//

//      VGASyncGen.v

//              VGA sync generator

//

// This source file is free software: you can redistribute it and/or modify 

// it under the terms of the GNU Lesser General Public License as published 

// by the Free Software Foundation, either version 3 of the License, or     

// (at your option) any later version.                                      

//                                                                          

// This source file is distributed in the hope that it will be useful,      

// but WITHOUT ANY WARRANTY; without even the implied warranty of           

// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the            

// GNU General Public License for more details.                             

//                                                                          

// You should have received a copy of the GNU General Public License        

// along with this program.  If not, see <http://www.gnu.org/licenses/>.    

//                                                                          

//

//

//      VGA video sync generator.

//

//      This module generates the basic sync timing signals required for a

//      VGA display.

//

// ============================================================================

module VGASyncGen(rst, clk, eol, eof, hSync, vSync, hCtr, vCtr,

    blank, vblank, vbl_int, border,

    hTotal_i, vTotal_i,

    hSyncOn_i, hSyncOff_i, vSyncOn_i, vSyncOff_i,

    hBlankOn_i, hBlankOff_i, vBlankOn_i, vBlankOff_i,

    hBorderOn_i, vBorderOn_i, hBorderOff_i, vBorderOff_i);

input rst;                      // reset

input clk;                      // video clock

output reg eol;

output reg eof;

output reg hSync, vSync;        // sync outputs

output [11:0] hCtr;

output [11:0] vCtr;

output reg blank;               // blanking output

output reg vblank;

output reg vbl_int;

output border;

input [11:0] hTotal_i;

input [11:0] vTotal_i;

input [11:0] hSyncOn_i;

input [11:0] hSyncOff_i;

input [11:0] vSyncOn_i;

input [11:0] vSyncOff_i;

input [11:0] hBlankOn_i;

input [11:0] hBlankOff_i;

input [11:0] vBlankOn_i;

input [11:0] vBlankOff_i;

input [11:0] hBorderOn_i;

input [11:0] hBorderOff_i;

input [11:0] vBorderOn_i;

input [11:0] vBorderOff_i;

//---------------------------------------------------------------------

//---------------------------------------------------------------------

wire vBlank1, hBlank1;

wire vBorder,hBorder;

wire hSync1,vSync1;

reg border;

wire eol1 = hCtr==hTotal_i;

wire eof1 = vCtr==vTotal_i;

assign vSync1 = vCtr >= vSyncOn_i && vCtr < vSyncOff_i;

assign hSync1 = hCtr >= hSyncOn_i && hCtr < hSyncOff_i;

assign vBlank1 = ~(vCtr < vBlankOn_i && vCtr >= vBlankOff_i);

assign hBlank1 = ~(hCtr < hBlankOn_i && hCtr >= hBlankOff_i);

assign vBorder = ~(vCtr < vBorderOn_i && vCtr >= vBorderOff_i);

assign hBorder = ~(hCtr < hBorderOn_i && hCtr >= hBorderOff_i);

counter #(12) u1 (.rst(rst), .clk(clk), .ce(1'b1), .ld(eol1), .d(12'd1), .q(hCtr), .tc() );

counter #(12) u2 (.rst(rst), .clk(clk), .ce(eol1),  .ld(eof1), .d(12'd1), .q(vCtr), .tc() );

always @(posedge clk)

    blank <= #1 hBlank1|vBlank1;

always @(posedge clk)

    vblank <= #1 vBlank1;

always @(posedge clk)

    border <= #1 hBorder|vBorder;

always @(posedge clk)

        hSync <= #1 hSync1;

always @(posedge clk)

        vSync <= #1 vSync1;

always @(posedge clk)

    eof <= eof1;

always @(posedge clk)

    eol <= eol1;

always @(posedge clk)

    vbl_int <= hCtr==12'd8 && vCtr==12'd1;

endmodule