Subversion Repositories scarts

/* The common simulator framework for GDB, the GNU Debugger.

   Copyright 2002, 2007, 2008 Free Software Foundation, Inc.

   Contributed by Andrew Cagney and Red Hat.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 3 of the License, or

   (at your option) any later version.

   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

#ifndef HW_DEVICE_H

#define HW_DEVICE_H

/* declared in sim-basics.h, this object is used everywhere */

/* typedef struct _device device; */

/* Introduction:

   As explained in earlier sections, the device, device instance,

   property and ports lie at the heart of PSIM's device model.

   In the below a synopsis of the device object and the operations it

   supports are given.

   */

/* Creation:

   The devices are created using a sequence of steps.  In particular:

        o       A tree framework is created.

                At this point, properties can be modified and extra

                devices inserted (or removed?).

#if LATER

                Any properties that have a run-time value (eg ihandle

                or device instance pointer properties) are entered

                into the device tree using a named reference to the

                corresponding runtime object that is to be created.

#endif

        o       Real devices are created for all the dummy devices.

                A device can assume that all of its parents have been

                initialized.

                A device can assume that all non run-time properties

                have been initialized.

                As part of being created, the device normally attaches

                itself to its parent bus.

#if LATER

                Device instance data is initialized.

#endif

#if LATER

        o       Any run-time properties are created.

#endif

#if MUCH_MUCH_LATER

        o       Some devices, as part of their initialization

                might want to refer to ihandle properties

                in the device tree.

#endif

   NOTES:

        o       It is important to separate the creation

                of an actual device from the creation

                of the tree.  The alternative creating

                the device in two stages: As a separate

                entity and then as a part of the tree.

#if LATER

        o       Run-time properties can not be created

                until after the devices in the tree

                have been created.  Hence an extra pass

                for handling them.

#endif

   */

/* Relationships:

   A device is able to determine its relationship to other devices

   within the tree.  Operations include querying for a devices parent,

   sibling, child, name, and path (from the root).

   */

#define hw_parent(hw) ((hw)->parent_of_hw + 0)

#define hw_sibling(hw) ((hw)->sibling_of_hw + 0)

#define hw_child(hw) ((hw)->child_of_hw + 0)

/* Herritage:

 */

#define hw_family(hw) ((hw)->family_of_hw + 0)

#define hw_name(hw) ((hw)->name_of_hw + 0)

#define hw_args(hw) ((hw)->args_of_hw + 0)

#define hw_path(hw) ((hw)->path_of_hw + 0)

/* Short cut to the root node of the tree */

#define hw_root(hw) ((hw)->root_of_hw + 0)

/* Short cut back to the simulator object */

#define hw_system(hw) ((hw)->system_of_hw)

/* For requests initiated by a CPU the cpu that initiated the request */

struct _sim_cpu *hw_system_cpu (struct hw *hw);

/* Device private data */

#define hw_data(hw) ((hw)->data_of_hw)

#define set_hw_data(hw, value) \

((hw)->data_of_hw = (value))

/* Perform a soft reset of the device */

typedef unsigned (hw_reset_method)

     (struct hw *me);

#define hw_reset(hw) ((hw)->to_reset (hw))

#define set_hw_reset(hw, method) \

((hw)->to_reset = method)

/* Hardware operations:

   Connecting a parent to its children is a common bus. The parent

   node is described as the bus owner and is responisble for

   co-ordinating bus operations. On the bus, a SPACE:ADDR pair is used

   to specify an address.  A device that is both a bus owner (parent)

   and bus client (child) are referred to as a bridging device.

   A child performing a data (DMA) transfer will pass its request to

   the bus owner (the devices parent).  The bus owner will then either

   reflect the request to one of the other devices attached to the bus

   (a child of the bus owner) or bridge the request up the tree to the

   next bus. */

/* Children attached to a bus can register (attach) themselves to

   specific addresses on their attached bus.

   (A device may also be implicitly attached to certain bus

   addresses).

   The SPACE:ADDR pair specify an address on the common bus that

   connects the parent and child devices. */

typedef void (hw_attach_address_method)

     (struct hw *me,

      int level,

      int space,

      address_word addr,

      address_word nr_bytes,

      struct hw *client); /*callback/default*/

#define hw_attach_address(me, level, space, addr, nr_bytes, client) \

((me)->to_attach_address (me, level, space, addr, nr_bytes, client))

#define set_hw_attach_address(hw, method) \

((hw)->to_attach_address = (method))

typedef void (hw_detach_address_method)

     (struct hw *me,

      int level,

      int space,

      address_word addr,

      address_word nr_bytes,

      struct hw *client); /*callback/default*/

#define hw_detach_address(me, level, space, addr, nr_bytes, client) \

((me)->to_detach_address (me, level, space, addr, nr_bytes, client))

#define set_hw_detach_address(hw, method) \

((hw)->to_detach_address = (method))

/* An IO operation from a parent to a child via the conecting bus.

   The SPACE:ADDR pair specify an address on the bus shared between

   the parent and child devices. */

typedef unsigned (hw_io_read_buffer_method)

     (struct hw *me,

      void *dest,

      int space,

      unsigned_word addr,

      unsigned nr_bytes);

#define hw_io_read_buffer(hw, dest, space, addr, nr_bytes) \

((hw)->to_io_read_buffer (hw, dest, space, addr, nr_bytes))

#define set_hw_io_read_buffer(hw, method) \

((hw)->to_io_read_buffer = (method))

typedef unsigned (hw_io_write_buffer_method)

     (struct hw *me,

      const void *source,

      int space,

      unsigned_word addr,

      unsigned nr_bytes);

#define hw_io_write_buffer(hw, src, space, addr, nr_bytes) \

((hw)->to_io_write_buffer (hw, src, space, addr, nr_bytes))

#define set_hw_io_write_buffer(hw, method) \

((hw)->to_io_write_buffer = (method))

/* Conversly, the device pci1000,1@1 may need to perform a dma transfer

   into the cpu/memory core.  Just as I/O moves towards the leaves,

   dma transfers move towards the core via the initiating devices

   parent nodes.  The root device (special) converts the DMA transfer

   into reads/writes to memory.

   The SPACE:ADDR pair specify an address on the common bus connecting

   the parent and child devices. */

typedef unsigned (hw_dma_read_buffer_method)

     (struct hw *bus,

      void *dest,

      int space,

      unsigned_word addr,

      unsigned nr_bytes);

#define hw_dma_read_buffer(bus, dest, space, addr, nr_bytes) \

((bus)->to_dma_read_buffer (bus, dest, space, addr, nr_bytes))

#define set_hw_dma_read_buffer(me, method) \

((me)->to_dma_read_buffer = (method))

typedef unsigned (hw_dma_write_buffer_method)

     (struct hw *bus,

      const void *source,

      int space,

      unsigned_word addr,

      unsigned nr_bytes,

      int violate_read_only_section);

#define hw_dma_write_buffer(bus, src, space, addr, nr_bytes, violate_ro) \

((bus)->to_dma_write_buffer (bus, src, space, addr, nr_bytes, violate_ro))

#define set_hw_dma_write_buffer(me, method) \

((me)->to_dma_write_buffer = (method))

/* Address/size specs for devices are encoded following a convention

   similar to that used by OpenFirmware.  In particular, an

   address/size is packed into a sequence of up to four cell words.

   The number of words determined by the number of {address,size}

   cells attributes of the device. */

typedef struct _hw_unit {

  int nr_cells;

  unsigned_cell cells[4]; /* unused cells are zero */

} hw_unit;

/* For the given bus, the number of address and size cells used in a

   hw_unit. */

#define hw_unit_nr_address_cells(bus) ((bus)->nr_address_cells_of_hw_unit + 0)

#define hw_unit_nr_size_cells(bus) ((bus)->nr_size_cells_of_hw_unit + 0)

/* For the given device, its identifying hw_unit address.

   Each device has an identifying hw_unit address.  That address is

   used when identifying one of a number of identical devices on a

   common controller bus. ex fd0&fd1. */

const hw_unit *hw_unit_address

(struct hw *me);

/* Convert between a textual and the internal representation of a

   hw_unit address/size.

   NOTE: A device asks its parent to translate between a hw_unit and

   textual representation.  This is because the textual address of a

   device is specified using the parent busses notation. */

typedef int (hw_unit_decode_method)

     (struct hw *bus,

      const char *encoded,

      hw_unit *unit);

#define hw_unit_decode(bus, encoded, unit) \

((bus)->to_unit_decode (bus, encoded, unit))

#define set_hw_unit_decode(hw, method) \

((hw)->to_unit_decode = (method))

typedef int (hw_unit_encode_method)

     (struct hw *bus,

      const hw_unit *unit,

      char *encoded,

      int sizeof_buf);

#define hw_unit_encode(bus, unit, encoded, sizeof_encoded) \

((bus)->to_unit_encode (bus, unit, encoded, sizeof_encoded))

#define set_hw_unit_encode(hw, method) \

((hw)->to_unit_encode = (method))

/* As the bus that the device is attached too, to translate a devices

   hw_unit address/size into a form suitable for an attach address

   call.

   Return a zero result if the address should be ignored when looking

   for attach addresses. */

typedef int (hw_unit_address_to_attach_address_method)

     (struct hw *bus,

      const hw_unit *unit_addr,

      int *attach_space,

      unsigned_word *attach_addr,

      struct hw *client);

#define hw_unit_address_to_attach_address(bus, unit_addr, attach_space, attach_addr, client) \

((bus)->to_unit_address_to_attach_address (bus, unit_addr, attach_space, attach_addr, client))

#define set_hw_unit_address_to_attach_address(hw, method) \

((hw)->to_unit_address_to_attach_address = (method))

typedef int (hw_unit_size_to_attach_size_method)

     (struct hw *bus,

      const hw_unit *unit_size,

      unsigned *attach_size,

      struct hw *client);

#define hw_unit_size_to_attach_size(bus, unit_size, attach_size, client) \

((bus)->to_unit_size_to_attach_size (bus, unit_size, attach_size, client))

#define set_hw_unit_size_to_attach_size(hw, method) \

((hw)->to_unit_size_to_attach_size = (method))

extern char *hw_strdup (struct hw *me, const char *str);

/* Utilities:

   */

/* IOCTL::

   Often devices require `out of band' operations to be performed.

   For instance a pal device may need to notify a PCI bridge device

   that an interrupt ack cycle needs to be performed on the PCI bus.

   Within PSIM such operations are performed by using the generic

   ioctl call <<hw_ioctl()>>.

   */

typedef enum {

  hw_ioctl_break, /* unsigned_word requested_break */

  hw_ioctl_set_trace, /* void */

  hw_ioctl_create_stack, /* unsigned_word *sp, char **argv, char **envp */

  hw_ioctl_change_media, /* const char *new_image (possibly NULL) */

  nr_hw_ioctl_requests,

} hw_ioctl_request;

typedef int (hw_ioctl_method)

     (struct hw *me,

      hw_ioctl_request request,

      va_list ap);

int hw_ioctl

(struct hw *me,

 hw_ioctl_request request,

 ...);

/* Error reporting::

   So that errors originating from devices appear in a consistent

   format, the <<hw_abort()>> function can be used.  Formats and

   outputs the error message before aborting the simulation

   Devices should use this function to abort the simulation except

   when the abort reason leaves the simulation in a hazardous

   condition (for instance a failed malloc).

   */

void hw_abort

(struct hw *me,

 const char *fmt,

 ...) __attribute__ ((format (printf, 2, 3)));

void hw_vabort

(struct hw *me,

 const char *fmt,

 va_list ap);

void hw_halt

(struct hw *me,

 int reason,

 int status);

#define hw_trace_p(hw) ((hw)->trace_of_hw_p + 0)

void hw_trace

(struct hw *me,

 const char *fmt,

 ...) __attribute__ ((format (printf, 2, 3)));

#define HW_TRACE(ARGS) \

do { \

  if (hw_trace_p (me)) \

    { \

      hw_trace ARGS; \

    } \

} while (0)

/* Some of the related functions require specific types */

struct hw_property_data;

struct hw_port_data;

struct hw_base_data;

struct hw_alloc_data;

struct hw_event_data;

struct hw_handle_data;

struct hw_instance_data;

/* Finally the hardware device - keep your grubby little mits off of

   these internals! :-) */

struct hw {

  /* our relatives */

  struct hw *parent_of_hw;

  struct hw *sibling_of_hw;

  struct hw *child_of_hw;

  /* our identity */

  const char *name_of_hw;

  const char *family_of_hw;

  const char *args_of_hw;

  const char *path_of_hw;

  /* our data */

  void *data_of_hw;

  /* hot links */

  struct hw *root_of_hw;

  struct sim_state *system_of_hw;

  /* identifying data */

  hw_unit unit_address_of_hw;

  int nr_address_cells_of_hw_unit;

  int nr_size_cells_of_hw_unit;

  /* Soft reset */

  hw_reset_method *to_reset;

  /* Basic callbacks */

  hw_io_read_buffer_method *to_io_read_buffer;

  hw_io_write_buffer_method *to_io_write_buffer;

  hw_dma_read_buffer_method *to_dma_read_buffer;

  hw_dma_write_buffer_method *to_dma_write_buffer;

  hw_attach_address_method *to_attach_address;

  hw_detach_address_method *to_detach_address;

  /* More complicated callbacks */

  hw_ioctl_method *to_ioctl;

  int trace_of_hw_p;

  /* address callbacks */

  hw_unit_decode_method *to_unit_decode;

  hw_unit_encode_method *to_unit_encode;

  hw_unit_address_to_attach_address_method *to_unit_address_to_attach_address;

  hw_unit_size_to_attach_size_method *to_unit_size_to_attach_size;

  /* related data */

  struct hw_property_data *properties_of_hw;

  struct hw_port_data *ports_of_hw;

  struct hw_base_data *base_of_hw;

  struct hw_alloc_data *alloc_of_hw;

  struct hw_event_data *events_of_hw;

  struct hw_handle_data *handles_of_hw;

  struct hw_instance_data *instances_of_hw;

};

#endif