OpenCores
URL https://opencores.org/ocsvn/sockit_owm/sockit_owm/trunk

Subversion Repositories sockit_owm

[/] [sockit_owm/] [trunk/] [HAL/] [src/] [temp10.c] - Blame information for rev 3

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 3 iztok
//---------------------------------------------------------------------------
2
// Copyright (C) 2000 Dallas Semiconductor Corporation, All Rights Reserved.
3
//
4
// Permission is hereby granted, free of charge, to any person obtaining a
5
// copy of this software and associated documentation files (the "Software"),
6
// to deal in the Software without restriction, including without limitation
7
// the rights to use, copy, modify, merge, publish, distribute, sublicense,
8
// and/or sell copies of the Software, and to permit persons to whom the
9
// Software is furnished to do so, subject to the following conditions:
10
//
11
// The above copyright notice and this permission notice shall be included
12
// in all copies or substantial portions of the Software.
13
//
14
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
15
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
16
// MERCHANTABILITY,  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
17
// IN NO EVENT SHALL DALLAS SEMICONDUCTOR BE LIABLE FOR ANY CLAIM, DAMAGES
18
// OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19
// ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20
// OTHER DEALINGS IN THE SOFTWARE.
21
//
22
// Except as contained in this notice, the name of Dallas Semiconductor
23
// shall not be used except as stated in the Dallas Semiconductor
24
// Branding Policy.
25
// ---------------------------------------------------------------------------
26
//
27
//  temp10.C - Module to read the DS1920/DS1820 - temperature measurement.
28
//
29
// ---------------------------------------------------------------------------
30
//
31
//
32
#include "ownet.h"
33
#include "temp10.h"
34
 
35
//----------------------------------------------------------------------
36
// Read the temperature of a DS1920/DS1820 (family code 0x10)
37
//
38
// 'portnum'     - number 0 to MAX_PORTNUM-1.  This number was provided to
39
//                 OpenCOM to indicate the port number.
40
// 'SerialNum'   - Serial Number of DS1920/DS1820 to read temperature from
41
// 'Temp '       - pointer to variable where that temperature will be
42
//                 returned
43
//
44
// Returns: TRUE(1)  temperature has been read and verified
45
//          FALSE(0) could not read the temperature, perhaps device is not
46
//                   in contact
47
//
48
int ReadTemperature10(int portnum, uchar *SerialNum, float *Temp)
49
{
50
   uchar rt=FALSE;
51
   uchar send_block[30],lastcrc8;
52
   int send_cnt, tsht, i, loop=0;
53
   float tmp,cr,cpc;
54
   int power;
55
 
56
   // set the device serial number to the counter device
57
   owSerialNum(portnum,SerialNum,FALSE);
58
 
59
   for (loop = 0; loop < 2; loop ++)
60
   {
61
      // check if the chip is connected to VDD
62
      if (owAccess(portnum))
63
      {
64
         owWriteByte(portnum,0xB4);
65
         power = owReadByte(portnum);
66
      }
67
 
68
      // access the device
69
      if (owAccess(portnum))
70
      {
71
         // send the convert command and if nesessary start power delivery
72
         if (power) {
73
            if (!owWriteBytePower(portnum,0x44))
74
               return FALSE;
75
         } else {
76
            if (!owWriteByte(portnum,0x44))
77
               return FALSE;
78
         }
79
 
80
         // sleep for 1 second
81
         msDelay(1000);
82
 
83
         // turn off the 1-Wire Net strong pull-up
84
         if (power) {
85
            if (owLevel(portnum,MODE_NORMAL) != MODE_NORMAL)
86
               return FALSE;
87
         }
88
 
89
         // access the device
90
         if (owAccess(portnum))
91
         {
92
            // create a block to send that reads the temperature
93
            // read scratchpad command
94
            send_cnt = 0;
95
            send_block[send_cnt++] = 0xBE;
96
            // now add the read bytes for data bytes and crc8
97
            for (i = 0; i < 9; i++)
98
               send_block[send_cnt++] = 0xFF;
99
 
100
            // now send the block
101
            if (owBlock(portnum,FALSE,send_block,send_cnt))
102
            {
103
               // initialize the CRC8 
104
               setcrc8(portnum,0);
105
               // perform the CRC8 on the last 8 bytes of packet
106
               for (i = send_cnt - 9; i < send_cnt; i++)
107
                  lastcrc8 = docrc8(portnum,send_block[i]);
108
 
109
               // verify CRC8 is correct
110
               if (lastcrc8 == 0x00)
111
               {
112
                  // calculate the high-res temperature
113
                  tsht = send_block[1]/2;
114
                  if (send_block[2] & 0x01)
115
                     tsht |= -128;
116
                  tmp = (float)(tsht);
117
                  cr = send_block[7];
118
                  cpc = send_block[8];
119
                  if (((cpc - cr) == 1) && (loop == 0))
120
                     continue;
121
                  if (cpc == 0)
122
                     return FALSE;
123
                  else
124
                     tmp = tmp - (float)0.25 + (cpc - cr)/cpc;
125
 
126
                  *Temp = tmp;
127
                  // success
128
                  rt = TRUE;
129
                  break;
130
               }
131
            }
132
         }
133
      }
134
 
135
   }
136
 
137
   // return the result flag rt
138
   return rt;
139
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.