Subversion Repositories amber

//////////////////////////////////////////////////////////////////

//                                                              //

//  Interrupt Controller for Amber                              //

//                                                              //

//  This file is part of the Amber project                      //

//  http://www.opencores.org/project,amber                      //

//                                                              //

//  Description                                                 //

//  Wishbone slave module that arbitrates between a number of   //

//  interrupt sources.

//                                                              //

//  Author(s):                                                  //

//      - Conor Santifort, csantifort.amber@gmail.com           //

//                                                              //

//////////////////////////////////////////////////////////////////

//                                                              //

// Copyright (C) 2010 Authors and OPENCORES.ORG                 //

//                                                              //

// This source file may be used and distributed without         //

// restriction provided that this copyright statement is not    //

// removed from the file and that any derivative work contains  //

// the original copyright notice and the associated disclaimer. //

//                                                              //

// This source file is free software; you can redistribute it   //

// and/or modify it under the terms of the GNU Lesser General   //

// Public License as published by the Free Software Foundation; //

// either version 2.1 of the License, or (at your option) any   //

// later version.                                               //

//                                                              //

// This source is distributed in the hope that it will be       //

// useful, but WITHOUT ANY WARRANTY; without even the implied   //

// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      //

// PURPOSE.  See the GNU Lesser General Public License for more //

// details.                                                     //

//                                                              //

// You should have received a copy of the GNU Lesser General    //

// Public License along with this source; if not, download it   //

// from http://www.opencores.org/lgpl.shtml                     //

//                                                              //

//////////////////////////////////////////////////////////////////

module interrupt_controller  #(

parameter WB_DWIDTH  = 32,

parameter WB_SWIDTH  = 4

)(

input                       i_clk,

input       [31:0]          i_wb_adr,

input       [WB_SWIDTH-1:0] i_wb_sel,

input                       i_wb_we,

output      [WB_DWIDTH-1:0] o_wb_dat,

input       [WB_DWIDTH-1:0] i_wb_dat,

input                       i_wb_cyc,

input                       i_wb_stb,

output                      o_wb_ack,

output                      o_wb_err,

output                      o_irq,

output                      o_firq,

input                       i_uart0_int,

input                       i_uart1_int,

input                       i_ethmac_int,

input                       i_test_reg_irq,

input                       i_test_reg_firq,

input       [2:0]           i_tm_timer_int

);

`include "register_addresses.v"

// Wishbone registers

reg  [31:0]     irq0_enable_reg  = 'd0;

reg  [31:0]     firq0_enable_reg = 'd0;

reg  [31:0]     irq1_enable_reg  = 'd0;

reg  [31:0]     firq1_enable_reg = 'd0;

reg             softint_0_reg    = 'd0;

reg             softint_1_reg    = 'd0;

wire [31:0]     raw_interrupts;

wire [31:0]     irq0_interrupts;

wire [31:0]     firq0_interrupts;

wire [31:0]     irq1_interrupts;

wire [31:0]     firq1_interrupts;

wire            irq_0;

wire            firq_0;

wire            irq_1;

wire            firq_1;

// Wishbone interface

reg  [31:0]     wb_rdata32 = 'd0;

wire            wb_start_write;

wire            wb_start_read;

reg             wb_start_read_d1 = 'd0;

wire [31:0]     wb_wdata32;

// ======================================================

// Wishbone Interface

// ======================================================

// Can't start a write while a read is completing. The ack for the read cycle

// needs to be sent first

assign wb_start_write = i_wb_stb && i_wb_we && !wb_start_read_d1;

assign wb_start_read  = i_wb_stb && !i_wb_we && !o_wb_ack;

always @( posedge i_clk )

    wb_start_read_d1 <= wb_start_read;

assign o_wb_err = 1'd0;

assign o_wb_ack = i_wb_stb && ( wb_start_write || wb_start_read_d1 );

generate

if (WB_DWIDTH == 128)

    begin : wb128

    assign wb_wdata32   = i_wb_adr[3:2] == 2'd3 ? i_wb_dat[127:96] :

                          i_wb_adr[3:2] == 2'd2 ? i_wb_dat[ 95:64] :

                          i_wb_adr[3:2] == 2'd1 ? i_wb_dat[ 63:32] :

                                                  i_wb_dat[ 31: 0] ;

    assign o_wb_dat    = {4{wb_rdata32}};

    end

else

    begin : wb32

    assign wb_wdata32  = i_wb_dat;

    assign o_wb_dat    = wb_rdata32;

    end

endgenerate

// ======================================

// Interrupts

// ======================================

assign raw_interrupts =  {23'd0,

                          i_ethmac_int,             // 8: Ethernet MAC interrupt

                          i_tm_timer_int[2],        // 7: Timer Module Interrupt 2

                          i_tm_timer_int[1],        // 6: Timer Module Interrupt 1

                          i_tm_timer_int[0],        // 5: Timer Module Interrupt 0

                          1'd0,

                          1'd0,

                          i_uart1_int,              // 2: Uart 1 interrupt

                          i_uart0_int,              // 1: Uart 0 interrupt

                          1'd0                      // 0: Software interrupt not

                         };                         // here because its not maskable

assign irq0_interrupts  = {raw_interrupts[31:1], softint_0_reg} & irq0_enable_reg;

assign firq0_interrupts =  raw_interrupts                       & firq0_enable_reg;

assign irq1_interrupts  = {raw_interrupts[31:1], softint_1_reg} & irq1_enable_reg;

assign firq1_interrupts  = raw_interrupts                       & firq1_enable_reg;

// The interrupts from the test registers module are not masked,

// just to keep their usage really simple

assign irq_0  = |{irq0_interrupts,  i_test_reg_irq};

assign firq_0 = |{firq0_interrupts, i_test_reg_firq};

assign irq_1  = |irq1_interrupts;

assign firq_1 = |firq1_interrupts;

assign o_irq  = irq_0  | irq_1;

assign o_firq = firq_0 | firq_1;

// ========================================================

// Register Writes

// ========================================================

always @( posedge i_clk )

    if ( wb_start_write )

        case ( i_wb_adr[15:0] )

            AMBER_IC_IRQ0_ENABLESET:  irq0_enable_reg  <=  irq0_enable_reg  | ( i_wb_dat);

            AMBER_IC_IRQ0_ENABLECLR:  irq0_enable_reg  <=  irq0_enable_reg  & (~i_wb_dat);

            AMBER_IC_FIRQ0_ENABLESET: firq0_enable_reg <=  firq0_enable_reg | ( i_wb_dat);

            AMBER_IC_FIRQ0_ENABLECLR: firq0_enable_reg <=  firq0_enable_reg & (~i_wb_dat);

            AMBER_IC_INT_SOFTSET_0:   softint_0_reg    <=  softint_0_reg   | ( i_wb_dat[0]);

            AMBER_IC_INT_SOFTCLEAR_0: softint_0_reg    <=  softint_0_reg   & (~i_wb_dat[0]);

            AMBER_IC_IRQ1_ENABLESET:  irq1_enable_reg  <=  irq1_enable_reg  | ( i_wb_dat);

            AMBER_IC_IRQ1_ENABLECLR:  irq1_enable_reg  <=  irq1_enable_reg  & (~i_wb_dat);

            AMBER_IC_FIRQ1_ENABLESET: firq1_enable_reg <=  firq1_enable_reg | ( i_wb_dat);

            AMBER_IC_FIRQ1_ENABLECLR: firq1_enable_reg <=  firq1_enable_reg & (~i_wb_dat);

            AMBER_IC_INT_SOFTSET_1:   softint_1_reg    <=  softint_1_reg   | ( i_wb_dat[0]);

            AMBER_IC_INT_SOFTCLEAR_1: softint_1_reg    <=  softint_1_reg   & (~i_wb_dat[0]);

        endcase

// ========================================================

// Register Reads

// ========================================================

always @( posedge i_clk )

    if ( wb_start_read )

        case ( i_wb_adr[15:0] )

            AMBER_IC_IRQ0_ENABLESET:    wb_rdata32 <= irq0_enable_reg;

            AMBER_IC_FIRQ0_ENABLESET:   wb_rdata32 <= firq0_enable_reg;

            AMBER_IC_IRQ0_RAWSTAT:      wb_rdata32 <= raw_interrupts;

            AMBER_IC_IRQ0_STATUS:       wb_rdata32 <= irq0_interrupts;

            AMBER_IC_FIRQ0_RAWSTAT:     wb_rdata32 <= raw_interrupts;

            AMBER_IC_FIRQ0_STATUS:      wb_rdata32 <= firq0_interrupts;

            AMBER_IC_INT_SOFTSET_0:     wb_rdata32 <= {31'd0, softint_0_reg};

            AMBER_IC_INT_SOFTCLEAR_0:   wb_rdata32 <= {31'd0, softint_0_reg};

            AMBER_IC_IRQ1_ENABLESET:    wb_rdata32 <= irq1_enable_reg;

            AMBER_IC_FIRQ1_ENABLESET:   wb_rdata32 <= firq1_enable_reg;

            AMBER_IC_IRQ1_RAWSTAT:      wb_rdata32 <= raw_interrupts;

            AMBER_IC_IRQ1_STATUS:       wb_rdata32 <= irq1_interrupts;

            AMBER_IC_FIRQ1_RAWSTAT:     wb_rdata32 <= raw_interrupts;

            AMBER_IC_FIRQ1_STATUS:      wb_rdata32 <= firq1_interrupts;

            AMBER_IC_INT_SOFTSET_1:     wb_rdata32 <= {31'd0, softint_1_reg};

            AMBER_IC_INT_SOFTCLEAR_1:   wb_rdata32 <= {31'd0, softint_1_reg};

            default:                    wb_rdata32 <= 32'h22334455;

        endcase

// =======================================================================================

// =======================================================================================

// =======================================================================================

// Non-synthesizable debug code

// =======================================================================================

//synopsys translate_off

`ifdef AMBER_IC_DEBUG

wire wb_read_ack = i_wb_stb && ( wb_start_write || wb_start_read_d1 );

// -----------------------------------------------

// Report Interrupt Controller Register accesses

// -----------------------------------------------

always @(posedge i_clk)

    if ( wb_read_ack || wb_start_write )

        begin

        `TB_DEBUG_MESSAGE

        if ( wb_start_write )

            $write("Write 0x%08x to   ", i_wb_dat);

        else

            $write("Read  0x%08x from ", o_wb_dat);

        case ( i_wb_adr[15:0] )

            AMBER_IC_IRQ0_STATUS:

                $write(" Interrupt Controller module IRQ0 Status");

            AMBER_IC_IRQ0_RAWSTAT:

                $write(" Interrupt Controller module IRQ0 Raw Status");

            AMBER_IC_IRQ0_ENABLESET:

                $write(" Interrupt Controller module IRQ0 Enable Set");

            AMBER_IC_IRQ0_ENABLECLR:

                $write(" Interrupt Controller module IRQ0 Enable Clear");

            AMBER_IC_FIRQ0_STATUS:

                $write(" Interrupt Controller module FIRQ0 Status");

            AMBER_IC_FIRQ0_RAWSTAT:

                $write(" Interrupt Controller module FIRQ0 Raw Status");

            AMBER_IC_FIRQ0_ENABLESET:

                $write(" Interrupt Controller module FIRQ0 Enable set");

            AMBER_IC_FIRQ0_ENABLECLR:

                $write(" Interrupt Controller module FIRQ0 Enable Clear");

            AMBER_IC_INT_SOFTSET_0:

                $write(" Interrupt Controller module SoftInt 0 Set");

            AMBER_IC_INT_SOFTCLEAR_0:

                $write(" Interrupt Controller module SoftInt 0 Clear");

            AMBER_IC_IRQ1_STATUS:

                $write(" Interrupt Controller module IRQ1 Status");

            AMBER_IC_IRQ1_RAWSTAT:

                $write(" Interrupt Controller module IRQ1 Raw Status");

            AMBER_IC_IRQ1_ENABLESET:

                $write(" Interrupt Controller module IRQ1 Enable Set");

            AMBER_IC_IRQ1_ENABLECLR:

                $write(" Interrupt Controller module IRQ1 Enable Clear");

            AMBER_IC_FIRQ1_STATUS:

                $write(" Interrupt Controller module FIRQ1 Status");

            AMBER_IC_FIRQ1_RAWSTAT:

                $write(" Interrupt Controller module FIRQ1 Raw Status");

            AMBER_IC_FIRQ1_ENABLESET:

                $write(" Interrupt Controller module FIRQ1 Enable set");

            AMBER_IC_FIRQ1_ENABLECLR:

                $write(" Interrupt Controller module FIRQ1 Enable Clear");

            AMBER_IC_INT_SOFTSET_1:

                $write(" Interrupt Controller module SoftInt 1 Set");

            AMBER_IC_INT_SOFTCLEAR_1:

                $write(" Interrupt Controller module SoftInt 1 Clear");

            default:

                begin

                $write(" unknown Amber IC Register region");

                $write(", Address 0x%08h\n", i_wb_adr);

                `TB_ERROR_MESSAGE

                end

        endcase

        $write(", Address 0x%08h\n", i_wb_adr);

        end

`endif

//synopsys translate_on

endmodule