| 1 |
2 |
OmarMokhta |
Release 12.3 Map M.70d (lin64)
|
| 2 |
|
|
Xilinx Mapping Report File for Design 'Keyboard_Controller'
|
| 3 |
|
|
|
| 4 |
|
|
Design Information
|
| 5 |
|
|
------------------
|
| 6 |
|
|
Command Line : map -intstyle ise -p xc3s200-ft256-5 -cm area -ir off -pr off
|
| 7 |
|
|
-c 100 -o Keyboard_Controller_map.ncd Keyboard_Controller.ngd
|
| 8 |
|
|
Keyboard_Controller.pcf
|
| 9 |
|
|
Target Device : xc3s200
|
| 10 |
|
|
Target Package : ft256
|
| 11 |
|
|
Target Speed : -5
|
| 12 |
|
|
Mapper Version : spartan3 -- $Revision: 1.52 $
|
| 13 |
|
|
Mapped Date : Fri Dec 3 00:08:20 2010
|
| 14 |
|
|
|
| 15 |
|
|
Design Summary
|
| 16 |
|
|
--------------
|
| 17 |
|
|
Number of errors: 0
|
| 18 |
|
|
Number of warnings: 0
|
| 19 |
|
|
Logic Utilization:
|
| 20 |
|
|
Number of Slice Flip Flops: 58 out of 3,840 1%
|
| 21 |
|
|
Number of 4 input LUTs: 32 out of 3,840 1%
|
| 22 |
|
|
Logic Distribution:
|
| 23 |
|
|
Number of occupied Slices: 42 out of 1,920 2%
|
| 24 |
|
|
Number of Slices containing only related logic: 42 out of 42 100%
|
| 25 |
|
|
Number of Slices containing unrelated logic: 0 out of 42 0%
|
| 26 |
|
|
*See NOTES below for an explanation of the effects of unrelated logic.
|
| 27 |
|
|
Total Number of 4 input LUTs: 51 out of 3,840 1%
|
| 28 |
|
|
Number used as logic: 30
|
| 29 |
|
|
Number used as a route-thru: 19
|
| 30 |
|
|
Number used as Shift registers: 2
|
| 31 |
|
|
|
| 32 |
|
|
The Slice Logic Distribution report is not meaningful if the design is
|
| 33 |
|
|
over-mapped for a non-slice resource or if Placement fails.
|
| 34 |
|
|
|
| 35 |
|
|
Number of bonded IOBs: 23 out of 173 13%
|
| 36 |
|
|
Number of BUFGMUXs: 2 out of 8 25%
|
| 37 |
|
|
|
| 38 |
|
|
Average Fanout of Non-Clock Nets: 2.32
|
| 39 |
|
|
|
| 40 |
|
|
Peak Memory Usage: 336 MB
|
| 41 |
|
|
Total REAL time to MAP completion: 1 secs
|
| 42 |
|
|
Total CPU time to MAP completion: 1 secs
|
| 43 |
|
|
|
| 44 |
|
|
NOTES:
|
| 45 |
|
|
|
| 46 |
|
|
Related logic is defined as being logic that shares connectivity - e.g. two
|
| 47 |
|
|
LUTs are "related" if they share common inputs. When assembling slices,
|
| 48 |
|
|
Map gives priority to combine logic that is related. Doing so results in
|
| 49 |
|
|
the best timing performance.
|
| 50 |
|
|
|
| 51 |
|
|
Unrelated logic shares no connectivity. Map will only begin packing
|
| 52 |
|
|
unrelated logic into a slice once 99% of the slices are occupied through
|
| 53 |
|
|
related logic packing.
|
| 54 |
|
|
|
| 55 |
|
|
Note that once logic distribution reaches the 99% level through related
|
| 56 |
|
|
logic packing, this does not mean the device is completely utilized.
|
| 57 |
|
|
Unrelated logic packing will then begin, continuing until all usable LUTs
|
| 58 |
|
|
and FFs are occupied. Depending on your timing budget, increased levels of
|
| 59 |
|
|
unrelated logic packing may adversely affect the overall timing performance
|
| 60 |
|
|
of your design.
|
| 61 |
|
|
|
| 62 |
|
|
Table of Contents
|
| 63 |
|
|
-----------------
|
| 64 |
|
|
Section 1 - Errors
|
| 65 |
|
|
Section 2 - Warnings
|
| 66 |
|
|
Section 3 - Informational
|
| 67 |
|
|
Section 4 - Removed Logic Summary
|
| 68 |
|
|
Section 5 - Removed Logic
|
| 69 |
|
|
Section 6 - IOB Properties
|
| 70 |
|
|
Section 7 - RPMs
|
| 71 |
|
|
Section 8 - Guide Report
|
| 72 |
|
|
Section 9 - Area Group and Partition Summary
|
| 73 |
|
|
Section 10 - Timing Report
|
| 74 |
|
|
Section 11 - Configuration String Information
|
| 75 |
|
|
Section 12 - Control Set Information
|
| 76 |
|
|
Section 13 - Utilization by Hierarchy
|
| 77 |
|
|
|
| 78 |
|
|
Section 1 - Errors
|
| 79 |
|
|
------------------
|
| 80 |
|
|
|
| 81 |
|
|
Section 2 - Warnings
|
| 82 |
|
|
--------------------
|
| 83 |
|
|
|
| 84 |
|
|
Section 3 - Informational
|
| 85 |
|
|
-------------------------
|
| 86 |
|
|
INFO:MapLib:562 - No environment variables are currently set.
|
| 87 |
|
|
INFO:LIT:244 - All of the single ended outputs in this design are using slew
|
| 88 |
|
|
rate limited output drivers. The delay on speed critical single ended outputs
|
| 89 |
|
|
can be dramatically reduced by designating them as fast outputs.
|
| 90 |
|
|
|
| 91 |
|
|
Section 4 - Removed Logic Summary
|
| 92 |
|
|
---------------------------------
|
| 93 |
|
|
4 block(s) optimized away
|
| 94 |
|
|
|
| 95 |
|
|
Section 5 - Removed Logic
|
| 96 |
|
|
-------------------------
|
| 97 |
|
|
|
| 98 |
|
|
Optimized Block(s):
|
| 99 |
|
|
TYPE BLOCK
|
| 100 |
|
|
GND XST_GND
|
| 101 |
|
|
VCC XST_VCC
|
| 102 |
|
|
|
| 103 |
|
|
To enable printing of redundant blocks removed and signals merged, set the
|
| 104 |
|
|
detailed map report option and rerun map.
|
| 105 |
|
|
|
| 106 |
|
|
Section 6 - IOB Properties
|
| 107 |
|
|
--------------------------
|
| 108 |
|
|
|
| 109 |
|
|
+---------------------------------------------------------------------------------------------------------------------------------------------------------+
|
| 110 |
|
|
| IOB Name | Type | Direction | IO Standard | Diff | Drive | Slew | Reg (s) | Resistor | IOB |
|
| 111 |
|
|
| | | | | Term | Strength | Rate | | | Delay |
|
| 112 |
|
|
+---------------------------------------------------------------------------------------------------------------------------------------------------------+
|
| 113 |
|
|
| Clk | IOB | INPUT | LVCMOS25 | | | | | | |
|
| 114 |
|
|
| Clk2 | IOB | INPUT | LVCMOS25 | | | | | | |
|
| 115 |
|
|
| DataIn | IOB | INPUT | LVCMOS25 | | | | | | |
|
| 116 |
|
|
| Enables<0> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 117 |
|
|
| Enables<1> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 118 |
|
|
| Enables<2> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 119 |
|
|
| Enables<3> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 120 |
|
|
| Segments<0> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 121 |
|
|
| Segments<1> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 122 |
|
|
| Segments<2> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 123 |
|
|
| Segments<3> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 124 |
|
|
| Segments<4> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 125 |
|
|
| Segments<5> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 126 |
|
|
| Segments<6> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 127 |
|
|
| Segments<7> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 128 |
|
|
| pressed<0> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 129 |
|
|
| pressed<1> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 130 |
|
|
| pressed<2> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 131 |
|
|
| pressed<3> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 132 |
|
|
| pressed<4> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 133 |
|
|
| pressed<5> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 134 |
|
|
| pressed<6> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 135 |
|
|
| pressed<7> | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | |
|
| 136 |
|
|
+---------------------------------------------------------------------------------------------------------------------------------------------------------+
|
| 137 |
|
|
|
| 138 |
|
|
Section 7 - RPMs
|
| 139 |
|
|
----------------
|
| 140 |
|
|
|
| 141 |
|
|
Section 8 - Guide Report
|
| 142 |
|
|
------------------------
|
| 143 |
|
|
Guide not run on this design.
|
| 144 |
|
|
|
| 145 |
|
|
Section 9 - Area Group and Partition Summary
|
| 146 |
|
|
--------------------------------------------
|
| 147 |
|
|
|
| 148 |
|
|
Partition Implementation Status
|
| 149 |
|
|
-------------------------------
|
| 150 |
|
|
|
| 151 |
|
|
No Partitions were found in this design.
|
| 152 |
|
|
|
| 153 |
|
|
-------------------------------
|
| 154 |
|
|
|
| 155 |
|
|
Area Group Information
|
| 156 |
|
|
----------------------
|
| 157 |
|
|
|
| 158 |
|
|
No area groups were found in this design.
|
| 159 |
|
|
|
| 160 |
|
|
----------------------
|
| 161 |
|
|
|
| 162 |
|
|
Section 10 - Timing Report
|
| 163 |
|
|
--------------------------
|
| 164 |
|
|
This design was not run using timing mode.
|
| 165 |
|
|
|
| 166 |
|
|
Section 11 - Configuration String Details
|
| 167 |
|
|
-----------------------------------------
|
| 168 |
|
|
Use the "-detail" map option to print out Configuration Strings
|
| 169 |
|
|
|
| 170 |
|
|
Section 12 - Control Set Information
|
| 171 |
|
|
------------------------------------
|
| 172 |
|
|
No control set information for this architecture.
|
| 173 |
|
|
|
| 174 |
|
|
Section 13 - Utilization by Hierarchy
|
| 175 |
|
|
-------------------------------------
|
| 176 |
|
|
Use the "-detail" map option to print out the Utilization by Hierarchy section.
|
