OpenCores
URL https://opencores.org/ocsvn/wb_lcd/wb_lcd/trunk

Subversion Repositories wb_lcd

[/] [wb_lcd/] [trunk/] [myhdl/] [wb_lcd_workspace/] [boards/] [s3esk-mm_lcd/] [rtl/] [rotary.v] - Blame information for rev 2

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 jvillar
//----------------------------------------------------------------------------
2
// Decode rotary encoder to clk-syncronous signals
3
//
4
// (c) Joerg Bornschein (<jb@capsec.org>)
5
//----------------------------------------------------------------------------
6
 
7
module rotary (
8
        input        clk,
9
        input        reset,
10
        input [2:0]  rot,
11
        //
12
        output reg   rot_btn,
13
        output reg   rot_event,
14
        output reg   rot_left
15
);
16
 
17
//----------------------------------------------------------------------------
18
// decode rotary encoder
19
//----------------------------------------------------------------------------
20
reg [1:0] rot_q;
21
 
22
always @(posedge clk)
23
begin
24
        case (rot[1:0])
25
                2'b00: rot_q <= { rot_q[1], 1'b0 };
26
                2'b01: rot_q <= { 1'b0, rot_q[0] };
27
                2'b10: rot_q <= { 1'b1, rot_q[0] };
28
                2'b11: rot_q <= { rot_q[1], 1'b1 };
29
        endcase
30
end
31
 
32
reg [1:0] rot_q_delayed;
33
 
34
always @(posedge clk)
35
begin
36
        rot_q_delayed <= rot_q;
37
 
38
        if (rot_q[0] && ~rot_q_delayed[0]) begin
39
                rot_event <= 1;
40
                rot_left  <= rot_q[1];
41
        end else
42
                rot_event <= 0;
43
end
44
 
45
//----------------------------------------------------------------------------
46
// debounce push button (rot[2])
47
//----------------------------------------------------------------------------
48
reg [2:0]  rot_d;
49
reg [15:0] dead_count;
50
 
51
always @(posedge clk)
52
begin
53
        if (reset) begin
54
                rot_btn    <= 0;
55
                dead_count <= 0;
56
        end else begin
57
                rot_btn <= 1'b0;
58
                rot_d   <= { rot_d[1:0], rot[2] };
59
 
60
                if (dead_count == 0) begin
61
                        if ( rot_d[2:1] == 2'b01 ) begin
62
                                rot_btn    <= 1'b1;
63
                                dead_count <= dead_count - 1;
64
                        end
65
                end else
66
                        dead_count <= dead_count - 1;
67
        end
68
end
69
 
70
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.