OpenCores
URL https://opencores.org/ocsvn/copyblaze/copyblaze/trunk

Subversion Repositories copyblaze

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /copyblaze/trunk
    from Rev 59 to Rev 60
    ↔ Reverse comparison
  •

Rev 59 → Rev 60

/copyblaze/sim/rtl_sim/src/wb_scope/mux32.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_scope/wb_scope.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_scope/bram_dp.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_timer/wb_timer.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_timer/wb_timer_8.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_sram/asram_core.v File deleted
/copyblaze/sim/rtl_sim/src/wb_sram/asram_top.v File deleted
/copyblaze/sim/rtl_sim/src/wb_uart/wb_uart.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_uart/uart_rx.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_uart/uart_tx.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_uart/wb_uart_8.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_uart/uart.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_gpio/WBOPRT08.vhd File deleted \ No newline at end of file
/copyblaze/sim/rtl_sim/src/wb_gpio/wb_gpio.vhd File deleted
/copyblaze/sim/rtl_sim/src/wb_gpio/wb_gpio_08.vhd File deleted
/copyblaze/sim/rtl_sim/bin/tb_copyBlaze_ecoSystem_wb-uart_run.do
9,29 → 9,32
vmap presynth presynth
vmap proasic3 "C:/Actel/Libero_v9.1/Designer/lib/modelsim/precompiled/vhdl/proasic3"
 
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_Usefull_Pkg.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_Toggle.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_Interrupt.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_ProgramCounter.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_Stack.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_ProgramFlowControl.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_FullAdder.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_CLAAdder.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_Alu.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_Flags.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_BancRegister.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_ScratchPad.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_DecodeControl.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_copyBlaze.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_ROM_Code.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cp_copyBlaze_ecoSystem.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/sim/rtl_sim/src/wb_uart/uart_rx.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/sim/rtl_sim/src/wb_uart/uart_tx.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/sim/rtl_sim/src/wb_uart/uart.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/sim/rtl_sim/src/wb_uart/wb_uart_8.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/sim/rtl_sim/src/wb_timer/wb_timer_8.vhd"
vcom -93 -explicit -work presynth "C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/bench/vhdl/tb_copyBlaze_ecoSystem_wb-uart.vhd"
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_Usefull_Pkg.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_Toggle.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_Interrupt.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_ProgramCounter.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_Stack.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_ProgramFlowControl.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_FullAdder.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_CLAAdder.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_Alu.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_Flags.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_BancRegister.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_ScratchPad.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_DecodeControl.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/cpu/cp_copyBlaze.vhd
 
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/ip/rom/cp_ROM_Code.vhd
 
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/soc/cp_copyBlaze_ecoSystem.vhd
 
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/ip/wb_uart/uart_rx.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/ip/wb_uart/uart_tx.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/ip/wb_uart/uart.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/rtl/vhdl/ip/wb_uart/wb_uart_8.vhd
vcom -93 -explicit -work presynth C:/Users/AbdAllah/Documents/mP/mP/copyblaze/copyblaze/bench/vhdl/tb_copyBlaze_ecoSystem_wb-uart.vhd
 
vsim -L proasic3 -L presynth -t 1ps presynth.tb_copyBlaze_ecoSystem_wb_uart
# The following lines are commented because no testbench is associated with the project
# add wave /testbench/*
/copyblaze/sw/code/pbcc/asm/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/test10/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/demo/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/funstruct/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/testINOUT/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/stubs/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/funlit/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/funvar/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/lcd/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/pointers/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/types/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/funargs/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/simplefunc/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/test6/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/test7/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/test8/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/test9/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/intr/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/operators/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v
/copyblaze/sw/code/pbcc/testM2/Makefile
11,7 → 11,7
MG=$(PATH_TOOL)/$(PATH_ASM)/pBlazASM/cpBlazeMRG/cpBlazeMRG.exe
 
# output directory
DIROUT=$(PATH_TOP)/rtl/vhdl
DIROUT=$(PATH_TOP)/rtl/vhdl/ip/rom
 
# remove command
RM = rm -f -v

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.