OpenCores
URL https://opencores.org/ocsvn/rf6809/rf6809/trunk

Subversion Repositories rf6809

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /rf6809
    from Rev 19 to Rev 20
    Reverse comparison

Rev 19 → Rev 20

/trunk/rtl/CmodA7/README.md
0,0 → 1,14
# Setting up the CmodA7 Project
 
Clock wizard will need to be run to create the clock generator for the project.
The following clocks are needed:
120 MHZ, 80 MHz, 40 MHz, 20 MHz, and something close to 14.7MHz
 
The ILA wizard will also need to be run to setup the ILA as outlined in the source code. Alternately the ILA component may be commented out.
 
The uart6551_x12 core can be found under the communications tab (uart6551) at opencores.org.
 
The other cores needed for the project can be found somewhere in the rtl file folders.
 
It will probably be neccessary to edit the memory cores to set the file where the rom data is read from. I have left it setup as it is on my workstation, but you'll likely want to do it differently.
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.