OpenCores
URL https://opencores.org/ocsvn/s1_core/s1_core/trunk

Subversion Repositories s1_core

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /s1_core/trunk
    from Rev 111 to Rev 112
    ↔ Reverse comparison
  •

Rev 111 → Rev 112

/tests/boot/boot.s
35,343 → 35,132
* ========== Copyright Header End ============================================
*/
 
!! Enable L2-ucache: currently unused in S1 Core
/*
!! SunStudio version
setx cregs_l2_ctl_reg_r64, %g1, %l1
mov 0xa9, %g1
sllx %g1, 32, %g1
stx %l1, [%g1 + 0x00]
stx %l1, [%g1 + 0x40]
stx %l1, [%g1 + 0x80]
stx %l1, [%g1 + 0xc0]
*/
/* Base address for Power-On Reser is 0xFFF0000020, adding 8 NOPs to artificially create the 0x20 offset */
nop
nop
nop
nop
nop
nop
nop
nop
/* Initialize windowed local, output and input GPRs */
wrpr %g0, %g0, %cwp !! CWP = 0
wrpr %g0, 0x6, %cansave !! CANSAVE = 6
wrpr %g0, %g0, %canrestore !! CANRESTORE = 0
wrpr %g0, %g0, %otherwin !! OTHERWIN = 0
wrpr %g0, 0x7, %cleanwin !! CLEANWIN = 7
wrpr %g0, 0x7, %wstate !! WSTATE = (b)000_111
add %g0, 0x1, %l1 !! l1 = 1
add %g0, 0x1, %o1 !! o1 = 1
add %g0, 0x1, %i1 !! i1 = 1
add %l1, 0x1, %l2 !! l1 = 2
add %o1, 0x1, %o2 !! o1 = 2
add %i1, 0x1, %i2 !! i1 = 2
add %l2, 0x1, %l3 !! l1 = 3
add %o2, 0x1, %o3 !! o1 = 3
add %i2, 0x1, %i3 !! i1 = 3
nop; nop; nop; nop
 
/*
!! GCC version
wr %g0, 5, %asr26
clr %l1
mov 0xa9, %g1
sllx %g1, 32, %g1
stx %l1, [%g1 + 0x00]
stx %l1, [%g1 + 0x40]
stx %l1, [%g1 + 0x80]
stx %l1, [%g1 + 0xc0]
*/
/* Set the LSU Diagnostic Register to enable all ways for L1-icache and L1-dcache and using the "random replacement" algorithm */
clr %l1 !! Clear l1
mov 0x10, %g1
stxa %l1, [%g1] (66) !! LSU_DIAG_REG = b00
 
!! Set the LSU Diagnostic Register to enable all ways for L1-icache and L1-dcache
!! and using the "random replacement" algorithm
/*
!! SunStudio version
setx cregs_lsu_diag_reg_r64, %g1, %l1
mov 0x10, %g1
stxa %l1, [%g1] ASI_LSU_DIAG_REG
*/
!! GCC version
mov 0x10, %g1
stxa %l1, [%g1] (66)
/* Set the LSU Control Register to enable L1-icache and L1-dcache */
! mov 3, %l1
! stxa %l1, [%g0] (69)
 
!! Set the LSU Control Register to enable L1-icache and L1-dcache
/*
!! SunStudio version
setx (CREGS_LSU_CTL_REG_IC | (CREGS_LSU_CTL_REG_DC << 1)), %g1, %l1
stxa %l1, [%g0] ASI_LSU_CTL_REG
*/
!! GCC version
mov 3, %l1
stxa %l1, [%g0] (69)
/* Set hpstate.red = 0 and hpstate.enb = 1 */
rdhpr %hpstate, %l1
wrhpr %l1, 0x820, %hpstate
 
!! Set hpstate.red = 0 and hpstate.enb = 1
rdhpr %hpstate, %l1
wrhpr %l1, 0x820, %hpstate
/* Clear L1-icache and L1-dcache SFSR */
mov 0x18, %g1
stxa %g0, [%g0 + %g1] 0x50 !! IMMU Synchronous Fault Status (SFS) register=0
stxa %g0, [%g0 + %g1] 0x58 !! DMMU Synchronous Fault Status (SFS) register=0
 
!! Initialize Interrupt Queue Registers: currently unused in S1 Core
/*
wr %g0, 0x25, %asi
 
stxa %g0, [0x3c0] %asi
stxa %g0, [0x3c8] %asi
stxa %g0, [0x3d0] %asi
stxa %g0, [0x3d8] %asi
 
stxa %g0, [0x3e0] %asi
stxa %g0, [0x3e8] %asi
stxa %g0, [0x3f0] %asi
stxa %g0, [0x3f8] %asi
 
wrpr 0, %tl
wrpr 0, %g0, %gl
wr %g0, cregs_fprs_imm, %fprs
wr %g0, cregs_ccr_imm, %ccr
 
wr %g0, cregs_asi_imm, %asi
setx cregs_tick_r64, %g1, %g2
!! FIXME set other ticks also
wrpr %g2, %tick
setx cregs_stick_r64, %g1, %g2
 
wr %g2, %g0, %sys_tick
mov 0x1, %g2
sllx %g2, 63, %g2
wr %g2, %g0, %tick_cmpr
 
wr %g2, %g0, %sys_tick_cmpr
wrhpr %g2, %g0, %hsys_tick_cmpr
mov %g0, %y
wrpr cregs_pil_imm, %pil
 
wrpr cregs_cwp_imm, %cwp
wrpr cregs_cansave_imm, %cansave
wrpr cregs_canrestore_imm, %canrestore
wrpr cregs_otherwin_imm, %otherwin
 
wrpr cregs_cleanwin_imm, %cleanwin
wrpr cregs_wstate_imm, %wstate
*/
 
!! Clear L1-icache and L1-dcache SFSR
mov 0x18, %g1
stxa %g0, [%g0 + %g1] 0x50 !! IMMU Synchronous Fault Status register=0
stxa %g0, [%g0 + %g1] 0x58 !! DMMU Synchronous Fault Status register=0
 
!! Enable error trap
/*
!! SunStudio version
setx cregs_sparc_error_en_reg_r64, %g1, %l1
stxa %l1, [%g0] ASI_SPARC_ERROR_EN_REG
*/
!! GCC version
/* SPARC Error Enable Reg. */
!! in file defines.h constant cregs_sparc_error_en_reg_r64:=3
!! so the effect should be "trap on correctable error" and "trap on uncorrectable error"
sethi %hh(0x3),%g1
or %g1,%hm(0x3),%g1
sllx %g1,32,%g1
sethi %hi(0x3),%l1
or %l1,%g1,%l1
or %l1,%lo(0x3),%l1
stxa %l1, [%g0] (75) !! copy the content of the l1 register into the "SPARC Error Enable reg"
or %g0, 0x3, %l1 !! l1 = 3
stxa %l1, [%g0] (75) !! SPARC_Error_Enable_reg = 3
 
!! Enable L2-ucache error trap: currently unused in S1 Core
/*
setx cregs_l2_error_en_reg_r64, %g1, %l1
/* Set HTBA: HTBA[63:14] = 0x12 */
mov 1, %g1 !! g1 = 1
sllx %g1, 18, %l1 !! l1 = 40000
sllx %g1, 15, %g1 !! g1 = 8000
or %l1, %g1, %l1 !! l1 = 48000
wrhpr %l1, %g0, %htba !! bits 63-14 select Hpriv trap vector
 
mov 0xaa, %g1
sllx %g1, 32, %g1
stx %l1, [%g1 + 0x00]
stx %l1, [%g1 + 0x40]
/**************************************************/
/* Instructions merged from file hboot_tlb_init.s */
/**************************************************/
 
stx %l1, [%g1 + 0x80]
stx %l1, [%g1 + 0xc0]
*/
!! Load Partition ID (permits to multiple OSs to share the same TLB)
/*
!! SunStudio version
rd %asr26, %l1
set 0x0300, %g1
and %l1, %g1, %l1
srlx %l1, 8, %l1 ! %l1 has thread ID
setx part_id_list, %g1, %g2
sllx %l1, 3, %l1 ! offset - partition list
ldx [%g2 + %l1], %g2 ! %g2 contains partition ID
mov 0x80, %g1
stxa %g2, [%g1] 0x58
*/
/*
!! GCC version
rd %asr26, %l1 !! ASR26 is the Strand Status and Control register
set 0x0300, %g1
and %l1, %g1, %l1
srlx %l1, 8, %l1 !! %l1 has thread ID
sethi %hi(0), %g1
sethi %hi(0x4c000), %g2
mov %g1, %g1
mov %g2, %g2
sllx %g1, 0x20, %g1
or %g2, %g1, %g2
sllx %l1, 3, %l1 !! offset - partition list
ldx [%g2 + %l1], %g2 !! %g2 contains partition ID
mov 0x80, %g1
stxa %g2, [%g1] 0x58 !! I/DMMU Partition ID=g2
*/
!! Set Hypervisor Trap Base Address
/*
!! SunStudio version
setx HV_TRAP_BASE_PA, %l0, %l7
wrhpr %l7, %g0, %htba
*/
!! GCC version
sethi %hh(0x80000),%g1
or %g1,%hm(0x80000),%g1
sllx %g1,32,%g1
sethi %hi(0x80000),%l1
or %l1,%g1,%l1
or %l1,%lo(0x80000),%l1
wrhpr %l7, %g0, %htba !! bits 63-14 select the trap vector
 
!! Load TSB config/base from memory and write to corresponding ASIs
!! Set tsb-reg (4 at present) for one partition
!! 2 i-config, 2-dconfig
/*
!! SunStudio version
setx tsb_config_base_list, %l0, %g1
*/
/*
!! GCC version
sethi %hi(0), %l0
sethi %hi(0x4c000), %g1
mov %l0, %l0
or %g1, 0x140, %g1
sllx %l0, 0x20, %l0
or %g1, %l0, %g1
 
sllx %g2, 7, %g2 !! %g2 contains offset to tsb_config_base_list
add %g1, %g2, %g1 !! %g1 contains pointer to tsb_config_base_list
 
!! IMMU_CXT_Z_CONFIG (0x37, VA=0x00)
ldx [%g1], %l1
stxa %l1, [%g0] 0x37
 
!! IMMU_CXT_NZ_CONFIG (0x3f, VA=0x00)
ldx [%g1+8], %l1
stxa %l1, [%g0] 0x3f
 
!! IMMU_CXT_Z_PS0_TSB (0x35, VA=0x0)
!! IMMU_CXT_Z_PS1_TSB (0x36, VA=0x0)
ldx [%g1+16], %l1
stxa %l1, [%g0] 0x35
ldx [%g1+32], %l1
stxa %l1, [%g0] 0x36
 
!! IMMU_CXT_NZ_PS0_TSB (0x3d, VA=0x00)
!! IMMU_CXT_NZ_PS1_TSB (0x3e, VA=0x00)
ldx [%g1+24], %l1
stxa %l1, [%g0] 0x3d
ldx [%g1+40], %l1
stxa %l1, [%g0] 0x3e
!! DMMU_CXT_Z_CONFIG (0x33, VA=0x00)
ldx [%g1+64], %l1
stxa %l1, [%g0] 0x33
 
!! DMMU_CXT_NZ_CONFIG (0x3b, VA=0x00)
ldx [%g1+72], %l1
stxa %l1, [%g0] 0x3b
 
!! DMMU_CXT_Z_PS0_TSB (0x31, VA=0x00)
!! DMMU_CXT_Z_PS1_TSB (0x32, VA=0x00)
ldx [%g1+80], %l1
stxa %l1, [%g0] 0x31
ldx [%g1+96], %l1
stxa %l1, [%g0] 0x32
!! DMMU_CXT_NZ_PS0_TSB (0x39, VA=0x00)
!! DMMU_CXT_NZ_PS0_TSB (0x3a, VA=0x00)
ldx [%g1+88], %l1
stxa %l1, [%g0] 0x39
ldx [%g1+104], %l1
stxa %l1, [%g0] 0x3a
 
!! Demap all itlb and dtlb
mov 0x80, %o2
stxa %g0, [%o2] 0x57 !! register ASI_IMMU_DEMAP=0 (IMMU TLB demap)
stxa %g0, [%o2] 0x5f !! register ASI_DMMU_DEMAP=0 (DMMU TLB demap)
*/
 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! Instructions merged from file hboot_tlb_init.s !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! Init all itlb entries
/* Init all itlb entries */
mov 0x30, %g1
mov %g0, %g2
itlb_init_loop:
!! clear data and tag entries of the TLB buffer
stxa %g0, [%g1] 0x50 !! IMMU TLB Tag Access register=0
stxa %g0, [%g2] 0x55 !! IMMU TLB Data Access register=0, g2 values from 0x000 to 0x7f8
 
add %g2, 8, %g2 !! increment the g2 register 8 bytes every time (64 bits)
cmp %g2, 0x200 !! compare g2 with 512 (512*8=4096=0x1000), but max VA=0x7F8
bne itlb_init_loop !! if (g2!=512) then run another loop
nop
 
!! Init all dtlb entries
/* Init all dtlb entries */
mov 0x30, %g1
mov %g0, %g2
dtlb_init_loop:
stxa %g0, [%g1] 0x58 !! DMMU TLB Tag Access register=0
stxa %g0, [%g2] 0x5d !! DMMU TLB Data Access register=0, g2 values from 0x000 to 0x7f8
 
add %g2, 8, %g2 !! increment the g2 register 64 bits each time
cmp %g2, 0x200 !! compare g2 with 512
bne dtlb_init_loop !! if (g2!=512) then run another loop
nop
 
!! Clear itlb/dtlb valid
/* Clear itlb/dtlb valid */
stxa %g0, [%g0] 0x60 !! ASI_ITLB_INVALIDATE_ALL(IMMU TLB Invalidate register)=0
mov 0x8, %g1
stxa %g0, [%g0 + %g1] 0x60 !! ASI_DTLB_INVALIDATE_ALL(DMMU TLB Invalidate register)=0
/********************************/
/* End of inserted instructions */
/********************************/
 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! End of inserted instructions !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! Initialize primary context register
/* Initialize primary context register = 0 */
mov 0x8, %l1
stxa %g0, [%l1] 0x21
 
!! Initialize secondary context register
/* Initialize secondary context register = 0 */
mov 0x10, %l1
stxa %g0, [%l1] 0x21
stxa %g0, [%l1] 0x21
 
!! Initialize dtsb entry for i context zero ps0, ps1
!! Set LSU Control Register to enable icache, dcache, immu, dmmu
/*
!! SunStudio version
setx cregs_lsu_ctl_reg_r64, %g1, %l1
*/
!! GCC version
!! LSU_CTL_REG[3]=1 (DMMU enabled)
!! LSU_CTL_REG[2]=1 (IMMU enabled)
!! LSU_CTL_REG[1]=1 (L1-dcache enabled)
!! LSU_CTL_REG[0]=1 (L1-icache enabled)
mov 0xF, %l1
stxa %l1, [%g0] (69)
 
!! Reset handler
/*
!! SunStudio version
setx HPriv_Reset_Handler, %g1, %g2
*/
!! GCC version
sethi %hi(0), %g1
sethi %hi(0x40000), %g2 !! New jump address in memory (used by last op of this file)
mov %g1, %g1
mov %g2, %g2
sllx %g1, 0x20, %g1
or %g2, %g1, %g2
/* LSU_CTL_REG[3]=1 (DMMU enabled)
LSU_CTL_REG[2]=1 (IMMU enabled)
LSU_CTL_REG[1]=0 (L1-dcache disabled)
LSU_CTL_REG[0]=0 (L1-icache disabled) */
mov 0xC, %l1 !! all enabled
stxa %l1, [%g0] (69)
rdhpr %hpstate, %g3
wrpr 1, %tl !! current trap level = 1
/* Jump to program in RAM */
sethi %hi(0), %g1
sethi %hi(0x40000), %g2 !! Jump address in RAM
mov %g1, %g1
mov %g2, %g2
sllx %g1, 0x20, %g1
or %g2, %g1, %g2
 
!! HTSTATE
/*
!! SunStudio version
setx cregs_htstate_r64, %g1, %g4
*/
!! GCC version
sethi %hh(0x0),%g1
or %g1,%hm(0x0),%g1
sllx %g1,32,%g1
sethi %hi(0x0),%l1
or %l1,%g1,%l1
or %l1,%lo(0x0),%l1
/* HTSTATE[TL=1] */
rdhpr %hpstate, %g3
wrpr 1, %tl !! current trap level = 1
mov 0x0, %l1 !! l1 = 0
wrhpr %g3, %g0, %htstate !! reset HTSTATE reg that store hyperpriviliged state after a trap
wrpr 0, %tl !! current trap level = 0 (No Trap)
mov 0x0, %o0 !! please don’t delete since used in customized IMMU miss trap
 
wrhpr %g4, %g0, %htstate !! reset HTSTATE reg that store hyperpriviliged state after a trap
wrpr 0, %tl !! current trap level = 0 (No Trap)
mov 0x0, %o0 !! please don't delete since used in customized IMMU miss trap
jmp %g2
!! wrhpr %g0, 0x800, %hpstate !! ensure bit 11 of the HPSTATE register is set
nop
nop
 
/* Jump in RAM */
jmp %g2 !! jump to 0x40000
!! wrhpr %g0, 0x804, %hpstate !! ensure bit 11 of the HPSTATE register is set
nop
nop

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.