URL
https://opencores.org/ocsvn/pairing/pairing/trunk
Subversion Repositories pairing
Compare Revisions
- This comparison shows the changes necessary to convert path
/pairing/trunk
- from Rev 15 to Rev 16
- ↔ Reverse comparison
Rev 15 → Rev 16
/synthesis/xilinx/tate_pairing.prj
0,0 → 1,7
verilog work "rtl/fun.v" |
verilog work "rtl/f3.v" |
verilog work "rtl/f3m.v" |
verilog work "rtl/f33m.v" |
verilog work "rtl/f32m.v" |
verilog work "rtl/f36m.v" |
verilog work "rtl/tate_pairing.v" |
/synthesis/xilinx/tate_pairing.xst
0,0 → 1,59
set -tmpdir "xst/projnav.tmp" |
set -xsthdpdir "xst" |
run |
-ifn tate_pairing.prj |
-ifmt mixed |
-ofn tate_pairing |
-ofmt NGC |
-p xc4vlx200-11-ff1513 |
-top tate_pairing |
-opt_mode Speed |
-opt_level 1 |
-power NO |
-iuc NO |
-keep_hierarchy No |
-netlist_hierarchy As_Optimized |
-rtlview Yes |
-glob_opt AllClockNets |
-read_cores YES |
-write_timing_constraints NO |
-cross_clock_analysis NO |
-hierarchy_separator / |
-bus_delimiter <> |
-case Maintain |
-slice_utilization_ratio 100 |
-bram_utilization_ratio 100 |
-dsp_utilization_ratio 100 |
-verilog2001 YES |
-fsm_extract YES -fsm_encoding Auto |
-safe_implementation No |
-fsm_style LUT |
-ram_extract Yes |
-ram_style Auto |
-rom_extract Yes |
-mux_style Auto |
-decoder_extract YES |
-priority_extract Yes |
-shreg_extract YES |
-shift_extract YES |
-xor_collapse YES |
-rom_style Auto |
-auto_bram_packing NO |
-mux_extract Yes |
-resource_sharing YES |
-async_to_sync NO |
-use_dsp48 Auto |
-iobuf YES |
-max_fanout 500 |
-bufg 32 |
-bufr 48 |
-register_duplication YES |
-register_balancing No |
-slice_packing YES |
-optimize_primitives NO |
-use_clock_enable Auto |
-use_sync_set Auto |
-use_sync_reset Auto |
-iob Auto |
-equivalent_register_removal YES |
-slice_utilization_ratio_maxmargin 5 |