/*!
|
/*!
|
ZTEX Firmware Kit for EZ-USB FX2 Microcontrollers
|
ZTEX Firmware Kit for EZ-USB FX2 Microcontrollers
|
Copyright (C) 2009-2011 ZTEX GmbH.
|
Copyright (C) 2009-2014 ZTEX GmbH.
|
http://www.ztex.de
|
http://www.ztex.de
|
|
|
This program is free software; you can redistribute it and/or modify
|
This program is free software; you can redistribute it and/or modify
|
it under the terms of the GNU General Public License version 3 as
|
it under the terms of the GNU General Public License version 3 as
|
published by the Free Software Foundation.
|
published by the Free Software Foundation.
|
|
|
This program is distributed in the hope that it will be useful, but
|
This program is distributed in the hope that it will be useful, but
|
WITHOUT ANY WARRANTY; without even the implied warranty of
|
WITHOUT ANY WARRANTY; without even the implied warranty of
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
General Public License for more details.
|
General Public License for more details.
|
|
|
You should have received a copy of the GNU General Public License
|
You should have received a copy of the GNU General Public License
|
along with this program; if not, see http://www.gnu.org/licenses/.
|
along with this program; if not, see http://www.gnu.org/licenses/.
|
!*/
|
!*/
|
|
|
/*
|
/*
|
EZ-USB registers
|
EZ-USB registers
|
*/
|
*/
|
|
|
#ifndef[EZREGS_H]
|
#ifndef[EZREGS_H]
|
#define[EZREGS_H]
|
#define[EZREGS_H]
|
|
|
#include[ztex-utils.h]
|
#include[ztex-utils.h]
|
|
|
/* This syncronization delay is valid if <CPU Clock> <= 5/3*<Interface Clock>,
|
/* This syncronization delay is valid if <CPU Clock> <= 5/3*<Interface Clock>,
|
i.e. if the Interface Clock is equal or greater than 28.8 MHz
|
i.e. if the Interface Clock is equal or greater than 28.8 MHz
|
|
|
The formula for the synchonization delay is:
|
The formula for the synchonization delay is:
|
|
|
/ <CPU Clock> \
|
/ <CPU Clock> \
|
<syncdelay> >= 1.5 * | ----------------- + 1 |
|
<syncdelay> >= 1.5 * | ----------------- + 1 |
|
\ <Interface Clock> /
|
\ <Interface Clock> /
|
|
|
Overwrite this macro if this formula is not satisfied
|
Overwrite this macro if this formula is not satisfied
|
*/
|
*/
|
|
|
#ifndef[SYNCDELAY;]
|
#ifndef[SYNCDELAY;]
|
#define[SYNCDELAY;][__asm
|
#define[SYNCDELAY;][__asm
|
nop
|
nop
|
nop
|
nop
|
nop
|
nop
|
nop
|
nop
|
__endasm;
|
__endasm;
|
]
|
]
|
#endif
|
#endif
|
|
|
// GPIF Waveform Memories
|
// GPIF Waveform Memories
|
__xdata __at 0xE400 volatile BYTE GPIF_WAVE_DATA[128]; // GPIF Waveform Descriptor 0, 1, 2 3, data
|
__xdata __at 0xE400 volatile BYTE GPIF_WAVE_DATA[128]; // GPIF Waveform Descriptor 0, 1, 2 3, data
|
__xdata __at 0xE400 volatile BYTE GPIF_WAVE0_DATA[32]; // GPIF Waveform Descriptor 0 data
|
__xdata __at 0xE400 volatile BYTE GPIF_WAVE0_DATA[32]; // GPIF Waveform Descriptor 0 data
|
__xdata __at 0xE420 volatile BYTE GPIF_WAVE1_DATA[32]; // GPIF Waveform Descriptor 1 data
|
__xdata __at 0xE420 volatile BYTE GPIF_WAVE1_DATA[32]; // GPIF Waveform Descriptor 1 data
|
__xdata __at 0xE440 volatile BYTE GPIF_WAVE2_DATA[32]; // GPIF Waveform Descriptor 2 data
|
__xdata __at 0xE440 volatile BYTE GPIF_WAVE2_DATA[32]; // GPIF Waveform Descriptor 2 data
|
__xdata __at 0xE460 volatile BYTE GPIF_WAVE3_DATA[32]; // GPIF Waveform Descriptor 3 data
|
__xdata __at 0xE460 volatile BYTE GPIF_WAVE3_DATA[32]; // GPIF Waveform Descriptor 3 data
|
|
|
// General Configuration
|
// General Configuration
|
__xdata __at 0xE50D volatile BYTE GPCR2; // General Purpose Configuration Register 2
|
__xdata __at 0xE50D volatile BYTE GPCR2; // General Purpose Configuration Register 2
|
__xdata __at 0xE600 volatile BYTE CPUCS; // Control & Status
|
__xdata __at 0xE600 volatile BYTE CPUCS; // Control & Status
|
__xdata __at 0xE601 volatile BYTE IFCONFIG; // Interface Configuration
|
__xdata __at 0xE601 volatile BYTE IFCONFIG; // Interface Configuration
|
__xdata __at 0xE602 volatile BYTE PINFLAGSAB; // FIFO FLAGA and FLAGB Assignments
|
__xdata __at 0xE602 volatile BYTE PINFLAGSAB; // FIFO FLAGA and FLAGB Assignments
|
__xdata __at 0xE603 volatile BYTE PINFLAGSCD; // FIFO FLAGC and FLAGD Assignments
|
__xdata __at 0xE603 volatile BYTE PINFLAGSCD; // FIFO FLAGC and FLAGD Assignments
|
__xdata __at 0xE604 volatile BYTE FIFORESET; // Restore FIFOS to default state
|
__xdata __at 0xE604 volatile BYTE FIFORESET; // Restore FIFOS to default state
|
__xdata __at 0xE605 volatile BYTE BREAKPT; // Breakpoint
|
__xdata __at 0xE605 volatile BYTE BREAKPT; // Breakpoint
|
__xdata __at 0xE606 volatile BYTE BPADDRH; // Breakpoint Address H
|
__xdata __at 0xE606 volatile BYTE BPADDRH; // Breakpoint Address H
|
__xdata __at 0xE607 volatile BYTE BPADDRL; // Breakpoint Address L
|
__xdata __at 0xE607 volatile BYTE BPADDRL; // Breakpoint Address L
|
__xdata __at 0xE608 volatile BYTE UART230; // 230 Kbaud clock for T0,T1,T2
|
__xdata __at 0xE608 volatile BYTE UART230; // 230 Kbaud clock for T0,T1,T2
|
__xdata __at 0xE609 volatile BYTE FIFOPINPOLAR; // FIFO polarities
|
__xdata __at 0xE609 volatile BYTE FIFOPINPOLAR; // FIFO polarities
|
__xdata __at 0xE60A volatile BYTE REVID; // Chip Revision
|
__xdata __at 0xE60A volatile BYTE REVID; // Chip Revision
|
__xdata __at 0xE60B volatile BYTE REVCTL; // Chip Revision Control
|
__xdata __at 0xE60B volatile BYTE REVCTL; // Chip Revision Control
|
|
|
// UDMA
|
// UDMA
|
__xdata __at 0xE60C volatile BYTE GPIFHOLDAMOUNT; // MSTB Hold Time (for UDMA)
|
__xdata __at 0xE60C volatile BYTE GPIFHOLDAMOUNT; // MSTB Hold Time (for UDMA)
|
|
|
// Endpoint Configuration
|
// Endpoint Configuration
|
__xdata __at 0xE610 volatile BYTE EP1OUTCFG; // Endpoint 1-OUT Configuration
|
__xdata __at 0xE610 volatile BYTE EP1OUTCFG; // Endpoint 1-OUT Configuration
|
__xdata __at 0xE611 volatile BYTE EP1INCFG; // Endpoint 1-IN Configuration
|
__xdata __at 0xE611 volatile BYTE EP1INCFG; // Endpoint 1-IN Configuration
|
__xdata __at 0xE612 volatile BYTE EP2CFG; // Endpoint 2 Configuration
|
__xdata __at 0xE612 volatile BYTE EP2CFG; // Endpoint 2 Configuration
|
__xdata __at 0xE613 volatile BYTE EP4CFG; // Endpoint 4 Configuration
|
__xdata __at 0xE613 volatile BYTE EP4CFG; // Endpoint 4 Configuration
|
__xdata __at 0xE614 volatile BYTE EP6CFG; // Endpoint 6 Configuration
|
__xdata __at 0xE614 volatile BYTE EP6CFG; // Endpoint 6 Configuration
|
__xdata __at 0xE615 volatile BYTE EP8CFG; // Endpoint 8 Configuration
|
__xdata __at 0xE615 volatile BYTE EP8CFG; // Endpoint 8 Configuration
|
__xdata __at 0xE618 volatile BYTE EP2FIFOCFG; // Endpoint 2 FIFO configuration
|
__xdata __at 0xE618 volatile BYTE EP2FIFOCFG; // Endpoint 2 FIFO configuration
|
__xdata __at 0xE619 volatile BYTE EP4FIFOCFG; // Endpoint 4 FIFO configuration
|
__xdata __at 0xE619 volatile BYTE EP4FIFOCFG; // Endpoint 4 FIFO configuration
|
__xdata __at 0xE61A volatile BYTE EP6FIFOCFG; // Endpoint 6 FIFO configuration
|
__xdata __at 0xE61A volatile BYTE EP6FIFOCFG; // Endpoint 6 FIFO configuration
|
__xdata __at 0xE61B volatile BYTE EP8FIFOCFG; // Endpoint 8 FIFO configuration
|
__xdata __at 0xE61B volatile BYTE EP8FIFOCFG; // Endpoint 8 FIFO configuration
|
__xdata __at 0xE620 volatile BYTE EP2AUTOINLENH; // Endpoint 2 Packet Length H (IN only)
|
__xdata __at 0xE620 volatile BYTE EP2AUTOINLENH; // Endpoint 2 Packet Length H (IN only)
|
__xdata __at 0xE621 volatile BYTE EP2AUTOINLENL; // Endpoint 2 Packet Length L (IN only)
|
__xdata __at 0xE621 volatile BYTE EP2AUTOINLENL; // Endpoint 2 Packet Length L (IN only)
|
__xdata __at 0xE622 volatile BYTE EP4AUTOINLENH; // Endpoint 4 Packet Length H (IN only)
|
__xdata __at 0xE622 volatile BYTE EP4AUTOINLENH; // Endpoint 4 Packet Length H (IN only)
|
__xdata __at 0xE623 volatile BYTE EP4AUTOINLENL; // Endpoint 4 Packet Length L (IN only)
|
__xdata __at 0xE623 volatile BYTE EP4AUTOINLENL; // Endpoint 4 Packet Length L (IN only)
|
__xdata __at 0xE624 volatile BYTE EP6AUTOINLENH; // Endpoint 6 Packet Length H (IN only)
|
__xdata __at 0xE624 volatile BYTE EP6AUTOINLENH; // Endpoint 6 Packet Length H (IN only)
|
__xdata __at 0xE625 volatile BYTE EP6AUTOINLENL; // Endpoint 6 Packet Length L (IN only)
|
__xdata __at 0xE625 volatile BYTE EP6AUTOINLENL; // Endpoint 6 Packet Length L (IN only)
|
__xdata __at 0xE626 volatile BYTE EP8AUTOINLENH; // Endpoint 8 Packet Length H (IN only)
|
__xdata __at 0xE626 volatile BYTE EP8AUTOINLENH; // Endpoint 8 Packet Length H (IN only)
|
__xdata __at 0xE627 volatile BYTE EP8AUTOINLENL; // Endpoint 8 Packet Length L (IN only)
|
__xdata __at 0xE627 volatile BYTE EP8AUTOINLENL; // Endpoint 8 Packet Length L (IN only)
|
__xdata __at 0xE628 volatile BYTE ECCCFG; // ECC Configuration
|
__xdata __at 0xE628 volatile BYTE ECCCFG; // ECC Configuration
|
__xdata __at 0xE629 volatile BYTE ECCRESET; // ECC Reset
|
__xdata __at 0xE629 volatile BYTE ECCRESET; // ECC Reset
|
__xdata __at 0xE62A volatile BYTE ECC1B0; // ECC1 Byte 0 Address
|
__xdata __at 0xE62A volatile BYTE ECC1B0; // ECC1 Byte 0 Address
|
__xdata __at 0xE62B volatile BYTE ECC1B1; // ECC1 Byte 1 Address
|
__xdata __at 0xE62B volatile BYTE ECC1B1; // ECC1 Byte 1 Address
|
__xdata __at 0xE62C volatile BYTE ECC1B2; // ECC1 Byte 2 Address
|
__xdata __at 0xE62C volatile BYTE ECC1B2; // ECC1 Byte 2 Address
|
__xdata __at 0xE62D volatile BYTE ECC2B0; // ECC2 Byte 0 Address
|
__xdata __at 0xE62D volatile BYTE ECC2B0; // ECC2 Byte 0 Address
|
__xdata __at 0xE62E volatile BYTE ECC2B1; // ECC2 Byte 1 Address
|
__xdata __at 0xE62E volatile BYTE ECC2B1; // ECC2 Byte 1 Address
|
__xdata __at 0xE62F volatile BYTE ECC2B2; // ECC2 Byte 2 Address
|
__xdata __at 0xE62F volatile BYTE ECC2B2; // ECC2 Byte 2 Address
|
__xdata __at 0xE630 volatile BYTE EP2FIFOPFH; // EP2 Programmable Flag trigger H
|
__xdata __at 0xE630 volatile BYTE EP2FIFOPFH; // EP2 Programmable Flag trigger H
|
__xdata __at 0xE631 volatile BYTE EP2FIFOPFL; // EP2 Programmable Flag trigger L
|
__xdata __at 0xE631 volatile BYTE EP2FIFOPFL; // EP2 Programmable Flag trigger L
|
__xdata __at 0xE632 volatile BYTE EP4FIFOPFH; // EP4 Programmable Flag trigger H
|
__xdata __at 0xE632 volatile BYTE EP4FIFOPFH; // EP4 Programmable Flag trigger H
|
__xdata __at 0xE633 volatile BYTE EP4FIFOPFL; // EP4 Programmable Flag trigger L
|
__xdata __at 0xE633 volatile BYTE EP4FIFOPFL; // EP4 Programmable Flag trigger L
|
__xdata __at 0xE634 volatile BYTE EP6FIFOPFH; // EP6 Programmable Flag trigger H
|
__xdata __at 0xE634 volatile BYTE EP6FIFOPFH; // EP6 Programmable Flag trigger H
|
__xdata __at 0xE635 volatile BYTE EP6FIFOPFL; // EP6 Programmable Flag trigger L
|
__xdata __at 0xE635 volatile BYTE EP6FIFOPFL; // EP6 Programmable Flag trigger L
|
__xdata __at 0xE636 volatile BYTE EP8FIFOPFH; // EP8 Programmable Flag trigger H
|
__xdata __at 0xE636 volatile BYTE EP8FIFOPFH; // EP8 Programmable Flag trigger H
|
__xdata __at 0xE637 volatile BYTE EP8FIFOPFL; // EP8 Programmable Flag trigger L
|
__xdata __at 0xE637 volatile BYTE EP8FIFOPFL; // EP8 Programmable Flag trigger L
|
__xdata __at 0xE640 volatile BYTE EP2ISOINPKTS; // EP2 (if ISO) IN Packets per frame (1-3)
|
__xdata __at 0xE640 volatile BYTE EP2ISOINPKTS; // EP2 (if ISO) IN Packets per frame (1-3)
|
__xdata __at 0xE641 volatile BYTE EP4ISOINPKTS; // EP4 (if ISO) IN Packets per frame (1-3)
|
__xdata __at 0xE641 volatile BYTE EP4ISOINPKTS; // EP4 (if ISO) IN Packets per frame (1-3)
|
__xdata __at 0xE642 volatile BYTE EP6ISOINPKTS; // EP6 (if ISO) IN Packets per frame (1-3)
|
__xdata __at 0xE642 volatile BYTE EP6ISOINPKTS; // EP6 (if ISO) IN Packets per frame (1-3)
|
__xdata __at 0xE643 volatile BYTE EP8ISOINPKTS; // EP8 (if ISO) IN Packets per frame (1-3)
|
__xdata __at 0xE643 volatile BYTE EP8ISOINPKTS; // EP8 (if ISO) IN Packets per frame (1-3)
|
__xdata __at 0xE648 volatile BYTE INPKTEND; // Force IN Packet End
|
__xdata __at 0xE648 volatile BYTE INPKTEND; // Force IN Packet End
|
__xdata __at 0xE649 volatile BYTE OUTPKTEND; // Force OUT Packet End
|
__xdata __at 0xE649 volatile BYTE OUTPKTEND; // Force OUT Packet End
|
|
|
// Interrupts
|
// Interrupts
|
__xdata __at 0xE650 volatile BYTE EP2FIFOIE; // Endpoint 2 Flag Interrupt Enable
|
__xdata __at 0xE650 volatile BYTE EP2FIFOIE; // Endpoint 2 Flag Interrupt Enable
|
__xdata __at 0xE651 volatile BYTE EP2FIFOIRQ; // Endpoint 2 Flag Interrupt Request
|
__xdata __at 0xE651 volatile BYTE EP2FIFOIRQ; // Endpoint 2 Flag Interrupt Request
|
__xdata __at 0xE652 volatile BYTE EP4FIFOIE; // Endpoint 4 Flag Interrupt Enable
|
__xdata __at 0xE652 volatile BYTE EP4FIFOIE; // Endpoint 4 Flag Interrupt Enable
|
__xdata __at 0xE653 volatile BYTE EP4FIFOIRQ; // Endpoint 4 Flag Interrupt Request
|
__xdata __at 0xE653 volatile BYTE EP4FIFOIRQ; // Endpoint 4 Flag Interrupt Request
|
__xdata __at 0xE654 volatile BYTE EP6FIFOIE; // Endpoint 6 Flag Interrupt Enable
|
__xdata __at 0xE654 volatile BYTE EP6FIFOIE; // Endpoint 6 Flag Interrupt Enable
|
__xdata __at 0xE655 volatile BYTE EP6FIFOIRQ; // Endpoint 6 Flag Interrupt Request
|
__xdata __at 0xE655 volatile BYTE EP6FIFOIRQ; // Endpoint 6 Flag Interrupt Request
|
__xdata __at 0xE656 volatile BYTE EP8FIFOIE; // Endpoint 8 Flag Interrupt Enable
|
__xdata __at 0xE656 volatile BYTE EP8FIFOIE; // Endpoint 8 Flag Interrupt Enable
|
__xdata __at 0xE657 volatile BYTE EP8FIFOIRQ; // Endpoint 8 Flag Interrupt Request
|
__xdata __at 0xE657 volatile BYTE EP8FIFOIRQ; // Endpoint 8 Flag Interrupt Request
|
__xdata __at 0xE658 volatile BYTE IBNIE; // IN-BULK-NAK Interrupt Enable
|
__xdata __at 0xE658 volatile BYTE IBNIE; // IN-BULK-NAK Interrupt Enable
|
__xdata __at 0xE659 volatile BYTE IBNIRQ; // IN-BULK-NAK interrupt Request
|
__xdata __at 0xE659 volatile BYTE IBNIRQ; // IN-BULK-NAK interrupt Request
|
__xdata __at 0xE65A volatile BYTE NAKIE; // Endpoint Ping NAK interrupt Enable
|
__xdata __at 0xE65A volatile BYTE NAKIE; // Endpoint Ping NAK interrupt Enable
|
__xdata __at 0xE65B volatile BYTE NAKIRQ; // Endpoint Ping NAK interrupt Request
|
__xdata __at 0xE65B volatile BYTE NAKIRQ; // Endpoint Ping NAK interrupt Request
|
__xdata __at 0xE65C volatile BYTE USBIE; // USB Int Enables
|
__xdata __at 0xE65C volatile BYTE USBIE; // USB Int Enables
|
__xdata __at 0xE65D volatile BYTE USBIRQ; // USB Interrupt Requests
|
__xdata __at 0xE65D volatile BYTE USBIRQ; // USB Interrupt Requests
|
__xdata __at 0xE65E volatile BYTE EPIE; // Endpoint Interrupt Enables
|
__xdata __at 0xE65E volatile BYTE EPIE; // Endpoint Interrupt Enables
|
__xdata __at 0xE65F volatile BYTE EPIRQ; // Endpoint Interrupt Requests
|
__xdata __at 0xE65F volatile BYTE EPIRQ; // Endpoint Interrupt Requests
|
__xdata __at 0xE660 volatile BYTE GPIFIE; // GPIF Interrupt Enable
|
__xdata __at 0xE660 volatile BYTE GPIFIE; // GPIF Interrupt Enable
|
__xdata __at 0xE661 volatile BYTE GPIFIRQ; // GPIF Interrupt Request
|
__xdata __at 0xE661 volatile BYTE GPIFIRQ; // GPIF Interrupt Request
|
__xdata __at 0xE662 volatile BYTE USBERRIE; // USB Error Interrupt Enables
|
__xdata __at 0xE662 volatile BYTE USBERRIE; // USB Error Interrupt Enables
|
__xdata __at 0xE663 volatile BYTE USBERRIRQ; // USB Error Interrupt Requests
|
__xdata __at 0xE663 volatile BYTE USBERRIRQ; // USB Error Interrupt Requests
|
__xdata __at 0xE664 volatile BYTE ERRCNTLIM; // USB Error counter and limit
|
__xdata __at 0xE664 volatile BYTE ERRCNTLIM; // USB Error counter and limit
|
__xdata __at 0xE665 volatile BYTE CLRERRCNT; // Clear Error Counter EC[3..0]
|
__xdata __at 0xE665 volatile BYTE CLRERRCNT; // Clear Error Counter EC[3..0]
|
__xdata __at 0xE666 volatile BYTE INT2IVEC; // Interupt 2 (USB) Autovector
|
__xdata __at 0xE666 volatile BYTE INT2IVEC; // Interupt 2 (USB) Autovector
|
__xdata __at 0xE667 volatile BYTE INT4IVEC; // Interupt 4 (FIFOS & GPIF) Autovector
|
__xdata __at 0xE667 volatile BYTE INT4IVEC; // Interupt 4 (FIFOS & GPIF) Autovector
|
__xdata __at 0xE668 volatile BYTE INTSETUP; // Interrupt 2&4 Setup
|
__xdata __at 0xE668 volatile BYTE INTSETUP; // Interrupt 2&4 Setup
|
|
|
// Input/Output
|
// Input/Output
|
__xdata __at 0xE670 volatile BYTE PORTACFG; // I/O PORTA Alternate Configuration
|
__xdata __at 0xE670 volatile BYTE PORTACFG; // I/O PORTA Alternate Configuration
|
__xdata __at 0xE671 volatile BYTE PORTCCFG; // I/O PORTC Alternate Configuration
|
__xdata __at 0xE671 volatile BYTE PORTCCFG; // I/O PORTC Alternate Configuration
|
__xdata __at 0xE672 volatile BYTE PORTECFG; // I/O PORTE Alternate Configuration
|
__xdata __at 0xE672 volatile BYTE PORTECFG; // I/O PORTE Alternate Configuration
|
__xdata __at 0xE678 volatile BYTE I2CS; // Control & Status
|
__xdata __at 0xE678 volatile BYTE I2CS; // Control & Status
|
__xdata __at 0xE679 volatile BYTE I2DAT; // Data
|
__xdata __at 0xE679 volatile BYTE I2DAT; // Data
|
__xdata __at 0xE67A volatile BYTE I2CTL; // I2C Control
|
__xdata __at 0xE67A volatile BYTE I2CTL; // I2C Control
|
__xdata __at 0xE67B volatile BYTE XAUTODAT1; // Autoptr1 MOVX access
|
__xdata __at 0xE67B volatile BYTE XAUTODAT1; // Autoptr1 MOVX access
|
__xdata __at 0xE67B volatile BYTE EXTAUTODAT1; // Autoptr1 MOVX access
|
__xdata __at 0xE67B volatile BYTE EXTAUTODAT1; // Autoptr1 MOVX access
|
__xdata __at 0xE67C volatile BYTE XAUTODAT2; // Autoptr2 MOVX access
|
__xdata __at 0xE67C volatile BYTE XAUTODAT2; // Autoptr2 MOVX access
|
__xdata __at 0xE67C volatile BYTE EXTAUTODAT2; // Autoptr2 MOVX access
|
__xdata __at 0xE67C volatile BYTE EXTAUTODAT2; // Autoptr2 MOVX access
|
|
|
// UDMA CRC
|
// UDMA CRC
|
__xdata __at 0xE67D volatile BYTE UDMACRCH; // UDMA CRC MSB
|
__xdata __at 0xE67D volatile BYTE UDMACRCH; // UDMA CRC MSB
|
__xdata __at 0xE67E volatile BYTE UDMACRCL; // UDMA CRC LSB
|
__xdata __at 0xE67E volatile BYTE UDMACRCL; // UDMA CRC LSB
|
__xdata __at 0xE67F volatile BYTE UDMACRCQUALIFIER; // UDMA CRC Qualifier
|
__xdata __at 0xE67F volatile BYTE UDMACRCQUALIFIER; // UDMA CRC Qualifier
|
|
|
// USB Control
|
// USB Control
|
__xdata __at 0xE680 volatile BYTE USBCS; // USB Control & Status
|
__xdata __at 0xE680 volatile BYTE USBCS; // USB Control & Status
|
__xdata __at 0xE681 volatile BYTE SUSPEND; // Put chip into suspend
|
__xdata __at 0xE681 volatile BYTE SUSPEND; // Put chip into suspend
|
__xdata __at 0xE682 volatile BYTE WAKEUPCS; // Wakeup source and polarity
|
__xdata __at 0xE682 volatile BYTE WAKEUPCS; // Wakeup source and polarity
|
__xdata __at 0xE683 volatile BYTE TOGCTL; // Toggle Control
|
__xdata __at 0xE683 volatile BYTE TOGCTL; // Toggle Control
|
__xdata __at 0xE684 volatile BYTE USBFRAMEH; // USB Frame count H
|
__xdata __at 0xE684 volatile BYTE USBFRAMEH; // USB Frame count H
|
__xdata __at 0xE685 volatile BYTE USBFRAMEL; // USB Frame count L
|
__xdata __at 0xE685 volatile BYTE USBFRAMEL; // USB Frame count L
|
__xdata __at 0xE686 volatile BYTE MICROFRAME; // Microframe count, 0-7
|
__xdata __at 0xE686 volatile BYTE MICROFRAME; // Microframe count, 0-7
|
__xdata __at 0xE687 volatile BYTE FNADDR; // USB Function address
|
__xdata __at 0xE687 volatile BYTE FNADDR; // USB Function address
|
|
|
// Endpoints
|
// Endpoints
|
__xdata __at 0xE68A volatile BYTE EP0BCH; // Endpoint 0 Byte Count H
|
__xdata __at 0xE68A volatile BYTE EP0BCH; // Endpoint 0 Byte Count H
|
__xdata __at 0xE68B volatile BYTE EP0BCL; // Endpoint 0 Byte Count L
|
__xdata __at 0xE68B volatile BYTE EP0BCL; // Endpoint 0 Byte Count L
|
__xdata __at 0xE68D volatile BYTE EP1OUTBC; // Endpoint 1 OUT Byte Count
|
__xdata __at 0xE68D volatile BYTE EP1OUTBC; // Endpoint 1 OUT Byte Count
|
__xdata __at 0xE68F volatile BYTE EP1INBC; // Endpoint 1 IN Byte Count
|
__xdata __at 0xE68F volatile BYTE EP1INBC; // Endpoint 1 IN Byte Count
|
__xdata __at 0xE690 volatile BYTE EP2BCH; // Endpoint 2 Byte Count H
|
__xdata __at 0xE690 volatile BYTE EP2BCH; // Endpoint 2 Byte Count H
|
__xdata __at 0xE691 volatile BYTE EP2BCL; // Endpoint 2 Byte Count L
|
__xdata __at 0xE691 volatile BYTE EP2BCL; // Endpoint 2 Byte Count L
|
__xdata __at 0xE694 volatile BYTE EP4BCH; // Endpoint 4 Byte Count H
|
__xdata __at 0xE694 volatile BYTE EP4BCH; // Endpoint 4 Byte Count H
|
__xdata __at 0xE695 volatile BYTE EP4BCL; // Endpoint 4 Byte Count L
|
__xdata __at 0xE695 volatile BYTE EP4BCL; // Endpoint 4 Byte Count L
|
__xdata __at 0xE698 volatile BYTE EP6BCH; // Endpoint 6 Byte Count H
|
__xdata __at 0xE698 volatile BYTE EP6BCH; // Endpoint 6 Byte Count H
|
__xdata __at 0xE699 volatile BYTE EP6BCL; // Endpoint 6 Byte Count L
|
__xdata __at 0xE699 volatile BYTE EP6BCL; // Endpoint 6 Byte Count L
|
__xdata __at 0xE69C volatile BYTE EP8BCH; // Endpoint 8 Byte Count H
|
__xdata __at 0xE69C volatile BYTE EP8BCH; // Endpoint 8 Byte Count H
|
__xdata __at 0xE69D volatile BYTE EP8BCL; // Endpoint 8 Byte Count L
|
__xdata __at 0xE69D volatile BYTE EP8BCL; // Endpoint 8 Byte Count L
|
__xdata __at 0xE6A0 volatile BYTE EP0CS; // Endpoint Control and Status
|
__xdata __at 0xE6A0 volatile BYTE EP0CS; // Endpoint Control and Status
|
__xdata __at 0xE6A1 volatile BYTE EP1OUTCS; // Endpoint 1 OUT Control and Status
|
__xdata __at 0xE6A1 volatile BYTE EP1OUTCS; // Endpoint 1 OUT Control and Status
|
__xdata __at 0xE6A2 volatile BYTE EP1INCS; // Endpoint 1 IN Control and Status
|
__xdata __at 0xE6A2 volatile BYTE EP1INCS; // Endpoint 1 IN Control and Status
|
__xdata __at 0xE6A3 volatile BYTE EPXCS[4]; // Endpoint 2-8 Control and Status
|
__xdata __at 0xE6A3 volatile BYTE EPXCS[4]; // Endpoint 2-8 Control and Status
|
__xdata __at 0xE6A3 volatile BYTE EP2CS; // Endpoint 2 Control and Status
|
__xdata __at 0xE6A3 volatile BYTE EP2CS; // Endpoint 2 Control and Status
|
__xdata __at 0xE6A4 volatile BYTE EP4CS; // Endpoint 4 Control and Status
|
__xdata __at 0xE6A4 volatile BYTE EP4CS; // Endpoint 4 Control and Status
|
__xdata __at 0xE6A5 volatile BYTE EP6CS; // Endpoint 6 Control and Status
|
__xdata __at 0xE6A5 volatile BYTE EP6CS; // Endpoint 6 Control and Status
|
__xdata __at 0xE6A6 volatile BYTE EP8CS; // Endpoint 8 Control and Status
|
__xdata __at 0xE6A6 volatile BYTE EP8CS; // Endpoint 8 Control and Status
|
__xdata __at 0xE6A7 volatile BYTE EP2FIFOFLGS; // Endpoint 2 Flags
|
__xdata __at 0xE6A7 volatile BYTE EP2FIFOFLGS; // Endpoint 2 Flags
|
__xdata __at 0xE6A8 volatile BYTE EP4FIFOFLGS; // Endpoint 4 Flags
|
__xdata __at 0xE6A8 volatile BYTE EP4FIFOFLGS; // Endpoint 4 Flags
|
__xdata __at 0xE6A9 volatile BYTE EP6FIFOFLGS; // Endpoint 6 Flags
|
__xdata __at 0xE6A9 volatile BYTE EP6FIFOFLGS; // Endpoint 6 Flags
|
__xdata __at 0xE6AA volatile BYTE EP8FIFOFLGS; // Endpoint 8 Flags
|
__xdata __at 0xE6AA volatile BYTE EP8FIFOFLGS; // Endpoint 8 Flags
|
__xdata __at 0xE6AB volatile BYTE EP2FIFOBCH; // EP2 FIFO total byte count H
|
__xdata __at 0xE6AB volatile BYTE EP2FIFOBCH; // EP2 FIFO total byte count H
|
__xdata __at 0xE6AC volatile BYTE EP2FIFOBCL; // EP2 FIFO total byte count L
|
__xdata __at 0xE6AC volatile BYTE EP2FIFOBCL; // EP2 FIFO total byte count L
|
__xdata __at 0xE6AD volatile BYTE EP4FIFOBCH; // EP4 FIFO total byte count H
|
__xdata __at 0xE6AD volatile BYTE EP4FIFOBCH; // EP4 FIFO total byte count H
|
__xdata __at 0xE6AE volatile BYTE EP4FIFOBCL; // EP4 FIFO total byte count L
|
__xdata __at 0xE6AE volatile BYTE EP4FIFOBCL; // EP4 FIFO total byte count L
|
__xdata __at 0xE6AF volatile BYTE EP6FIFOBCH; // EP6 FIFO total byte count H
|
__xdata __at 0xE6AF volatile BYTE EP6FIFOBCH; // EP6 FIFO total byte count H
|
__xdata __at 0xE6B0 volatile BYTE EP6FIFOBCL; // EP6 FIFO total byte count L
|
__xdata __at 0xE6B0 volatile BYTE EP6FIFOBCL; // EP6 FIFO total byte count L
|
__xdata __at 0xE6B1 volatile BYTE EP8FIFOBCH; // EP8 FIFO total byte count H
|
__xdata __at 0xE6B1 volatile BYTE EP8FIFOBCH; // EP8 FIFO total byte count H
|
__xdata __at 0xE6B2 volatile BYTE EP8FIFOBCL; // EP8 FIFO total byte count L
|
__xdata __at 0xE6B2 volatile BYTE EP8FIFOBCL; // EP8 FIFO total byte count L
|
__xdata __at 0xE6B3 volatile BYTE SUDPTRH; // Setup Data Pointer high address byte
|
__xdata __at 0xE6B3 volatile BYTE SUDPTRH; // Setup Data Pointer high address byte
|
__xdata __at 0xE6B4 volatile BYTE SUDPTRL; // Setup Data Pointer low address byte
|
__xdata __at 0xE6B4 volatile BYTE SUDPTRL; // Setup Data Pointer low address byte
|
__xdata __at 0xE6B5 volatile BYTE SUDPTRCTL; // Setup Data Pointer Auto Mode
|
__xdata __at 0xE6B5 volatile BYTE SUDPTRCTL; // Setup Data Pointer Auto Mode
|
__xdata __at 0xE6B8 volatile BYTE SETUPDAT[8]; // 8 bytes of SETUP data
|
__xdata __at 0xE6B8 volatile BYTE SETUPDAT[8]; // 8 bytes of SETUP data
|
__xdata __at 0xE6B8 volatile BYTE bmRequestType; // Request Type, Direction, and Recipient
|
__xdata __at 0xE6B8 volatile BYTE bmRequestType; // Request Type, Direction, and Recipient
|
__xdata __at 0xE6B9 volatile BYTE bRequest; // The actual request
|
__xdata __at 0xE6B9 volatile BYTE bRequest; // The actual request
|
__xdata __at 0xE6BA volatile BYTE wValueL;
|
__xdata __at 0xE6BA volatile BYTE wValueL;
|
__xdata __at 0xE6BB volatile BYTE wValueH;
|
__xdata __at 0xE6BB volatile BYTE wValueH;
|
__xdata __at 0xE6BC volatile BYTE wIndexL;
|
__xdata __at 0xE6BC volatile BYTE wIndexL;
|
__xdata __at 0xE6BD volatile BYTE wIndexH;
|
__xdata __at 0xE6BD volatile BYTE wIndexH;
|
__xdata __at 0xE6BE volatile BYTE wLengthL; // Number of bytes to transfer if there is a data phase
|
__xdata __at 0xE6BE volatile BYTE wLengthL; // Number of bytes to transfer if there is a data phase
|
__xdata __at 0xE6BF volatile BYTE wLengthH;
|
__xdata __at 0xE6BF volatile BYTE wLengthH;
|
|
|
// GPIF
|
// GPIF
|
__xdata __at 0xE6C0 volatile BYTE GPIFWFSELECT; // Waveform Selector
|
__xdata __at 0xE6C0 volatile BYTE GPIFWFSELECT; // Waveform Selector
|
__xdata __at 0xE6C1 volatile BYTE GPIFIDLECS; // GPIF Done, GPIF IDLE drive mode
|
__xdata __at 0xE6C1 volatile BYTE GPIFIDLECS; // GPIF Done, GPIF IDLE drive mode
|
__xdata __at 0xE6C2 volatile BYTE GPIFIDLECTL; // Inactive Bus, CTL states
|
__xdata __at 0xE6C2 volatile BYTE GPIFIDLECTL; // Inactive Bus, CTL states
|
__xdata __at 0xE6C3 volatile BYTE GPIFCTLCFG; // CTL OUT pin drive
|
__xdata __at 0xE6C3 volatile BYTE GPIFCTLCFG; // CTL OUT pin drive
|
__xdata __at 0xE6C4 volatile BYTE GPIFADRH; // GPIF Address H
|
__xdata __at 0xE6C4 volatile BYTE GPIFADRH; // GPIF Address H
|
__xdata __at 0xE6C5 volatile BYTE GPIFADRL; // GPIF Address L
|
__xdata __at 0xE6C5 volatile BYTE GPIFADRL; // GPIF Address L
|
|
|
// FLOWSTATE
|
// FLOWSTATE
|
__xdata __at 0xE6C6 volatile BYTE FLOWSTATE; // Flowstate Enable and Selector
|
__xdata __at 0xE6C6 volatile BYTE FLOWSTATE; // Flowstate Enable and Selector
|
__xdata __at 0xE6C7 volatile BYTE FLOWLOGIC; // Flowstate Logic
|
__xdata __at 0xE6C7 volatile BYTE FLOWLOGIC; // Flowstate Logic
|
__xdata __at 0xE6C8 volatile BYTE FLOWEQ0CTL; // CTL-Pin States in Flowstate (when Logic = 0)
|
__xdata __at 0xE6C8 volatile BYTE FLOWEQ0CTL; // CTL-Pin States in Flowstate (when Logic = 0)
|
__xdata __at 0xE6C9 volatile BYTE FLOWEQ1CTL; // CTL-Pin States in Flowstate (when Logic = 1)
|
__xdata __at 0xE6C9 volatile BYTE FLOWEQ1CTL; // CTL-Pin States in Flowstate (when Logic = 1)
|
__xdata __at 0xE6CA volatile BYTE FLOWHOLDOFF; // Holdoff Configuration
|
__xdata __at 0xE6CA volatile BYTE FLOWHOLDOFF; // Holdoff Configuration
|
__xdata __at 0xE6CB volatile BYTE FLOWSTB; // Flowstate Strobe Configuration
|
__xdata __at 0xE6CB volatile BYTE FLOWSTB; // Flowstate Strobe Configuration
|
__xdata __at 0xE6CC volatile BYTE FLOWSTBEDGE; // Flowstate Rising/Falling Edge Configuration
|
__xdata __at 0xE6CC volatile BYTE FLOWSTBEDGE; // Flowstate Rising/Falling Edge Configuration
|
__xdata __at 0xE6CD volatile BYTE FLOWSTBHPERIOD; // Master-Strobe Half-Period
|
__xdata __at 0xE6CD volatile BYTE FLOWSTBHPERIOD; // Master-Strobe Half-Period
|
__xdata __at 0xE6CE volatile BYTE GPIFTCB3; // GPIF Transaction Count Byte 3
|
__xdata __at 0xE6CE volatile BYTE GPIFTCB3; // GPIF Transaction Count Byte 3
|
__xdata __at 0xE6CF volatile BYTE GPIFTCB2; // GPIF Transaction Count Byte 2
|
__xdata __at 0xE6CF volatile BYTE GPIFTCB2; // GPIF Transaction Count Byte 2
|
__xdata __at 0xE6D0 volatile BYTE GPIFTCB1; // GPIF Transaction Count Byte 1
|
__xdata __at 0xE6D0 volatile BYTE GPIFTCB1; // GPIF Transaction Count Byte 1
|
__xdata __at 0xE6D1 volatile BYTE GPIFTCB0; // GPIF Transaction Count Byte 0
|
__xdata __at 0xE6D1 volatile BYTE GPIFTCB0; // GPIF Transaction Count Byte 0
|
__xdata __at 0xE6D2 volatile BYTE EP2GPIFFLGSEL; // EP2 GPIF Flag select
|
__xdata __at 0xE6D2 volatile BYTE EP2GPIFFLGSEL; // EP2 GPIF Flag select
|
__xdata __at 0xE6D3 volatile BYTE EP2GPIFPFSTOP; // Stop GPIF EP2 transaction on prog. flag
|
__xdata __at 0xE6D3 volatile BYTE EP2GPIFPFSTOP; // Stop GPIF EP2 transaction on prog. flag
|
__xdata __at 0xE6D4 volatile BYTE EP2GPIFTRIG; // EP2 FIFO Trigger
|
__xdata __at 0xE6D4 volatile BYTE EP2GPIFTRIG; // EP2 FIFO Trigger
|
__xdata __at 0xE6DA volatile BYTE EP4GPIFFLGSEL; // EP4 GPIF Flag select
|
__xdata __at 0xE6DA volatile BYTE EP4GPIFFLGSEL; // EP4 GPIF Flag select
|
__xdata __at 0xE6DB volatile BYTE EP4GPIFPFSTOP; // Stop GPIF EP4 transaction on prog. flag
|
__xdata __at 0xE6DB volatile BYTE EP4GPIFPFSTOP; // Stop GPIF EP4 transaction on prog. flag
|
__xdata __at 0xE6DC volatile BYTE EP4GPIFTRIG; // EP4 FIFO Trigger
|
__xdata __at 0xE6DC volatile BYTE EP4GPIFTRIG; // EP4 FIFO Trigger
|
__xdata __at 0xE6E2 volatile BYTE EP6GPIFFLGSEL; // EP6 GPIF Flag select
|
__xdata __at 0xE6E2 volatile BYTE EP6GPIFFLGSEL; // EP6 GPIF Flag select
|
__xdata __at 0xE6E3 volatile BYTE EP6GPIFPFSTOP; // Stop GPIF EP6 transaction on prog. flag
|
__xdata __at 0xE6E3 volatile BYTE EP6GPIFPFSTOP; // Stop GPIF EP6 transaction on prog. flag
|
__xdata __at 0xE6E4 volatile BYTE EP6GPIFTRIG; // EP6 FIFO Trigger
|
__xdata __at 0xE6E4 volatile BYTE EP6GPIFTRIG; // EP6 FIFO Trigger
|
__xdata __at 0xE6EA volatile BYTE EP8GPIFFLGSEL; // EP8 GPIF Flag select
|
__xdata __at 0xE6EA volatile BYTE EP8GPIFFLGSEL; // EP8 GPIF Flag select
|
__xdata __at 0xE6EB volatile BYTE EP8GPIFPFSTOP; // Stop GPIF EP8 transaction on prog. flag
|
__xdata __at 0xE6EB volatile BYTE EP8GPIFPFSTOP; // Stop GPIF EP8 transaction on prog. flag
|
__xdata __at 0xE6EC volatile BYTE EP8GPIFTRIG; // EP8 FIFO Trigger
|
__xdata __at 0xE6EC volatile BYTE EP8GPIFTRIG; // EP8 FIFO Trigger
|
__xdata __at 0xE6F0 volatile BYTE XGPIFSGLDATH; // GPIF Data H (16-bit mode only)
|
__xdata __at 0xE6F0 volatile BYTE XGPIFSGLDATH; // GPIF Data H (16-bit mode only)
|
__xdata __at 0xE6F1 volatile BYTE XGPIFSGLDATLX; // Read/Write GPIF Data L & trigger transac
|
__xdata __at 0xE6F1 volatile BYTE XGPIFSGLDATLX; // Read/Write GPIF Data L & trigger transac
|
__xdata __at 0xE6F2 volatile BYTE XGPIFSGLDATLNOX; // Read GPIF Data L, no transac trigger
|
__xdata __at 0xE6F2 volatile BYTE XGPIFSGLDATLNOX; // Read GPIF Data L, no transac trigger
|
__xdata __at 0xE6F3 volatile BYTE GPIFREADYCFG; // Internal RDY,Sync/Async, RDY5CFG
|
__xdata __at 0xE6F3 volatile BYTE GPIFREADYCFG; // Internal RDY,Sync/Async, RDY5CFG
|
__xdata __at 0xE6F4 volatile BYTE GPIFREADYSTAT; // RDY pin states
|
__xdata __at 0xE6F4 volatile BYTE GPIFREADYSTAT; // RDY pin states
|
__xdata __at 0xE6F5 volatile BYTE GPIFABORT; // Abort GPIF cycles
|
__xdata __at 0xE6F5 volatile BYTE GPIFABORT; // Abort GPIF cycles
|
|
|
// Endpoint Buffers
|
// Endpoint Buffers
|
__xdata __at 0xE740 volatile BYTE EP0BUF[64]; // EP0 IN-OUT buffer
|
__xdata __at 0xE740 volatile BYTE EP0BUF[64]; // EP0 IN-OUT buffer
|
__xdata __at 0xE780 volatile BYTE EP1OUTBUF[64]; // EP1-OUT buffer
|
__xdata __at 0xE780 volatile BYTE EP1OUTBUF[64]; // EP1-OUT buffer
|
__xdata __at 0xE7C0 volatile BYTE EP1INBUF[64]; // EP1-IN buffer
|
__xdata __at 0xE7C0 volatile BYTE EP1INBUF[64]; // EP1-IN buffer
|
__xdata __at 0xF000 volatile BYTE EP2FIFOBUF[1024]; // 512/1024-byte EP2 buffer (IN or OUT)
|
__xdata __at 0xF000 volatile BYTE EP2FIFOBUF[1024]; // 512/1024-byte EP2 buffer (IN or OUT)
|
__xdata __at 0xF400 volatile BYTE EP4FIFOBUF[1024]; // 512 byte EP4 buffer (IN or OUT)
|
__xdata __at 0xF400 volatile BYTE EP4FIFOBUF[1024]; // 512 byte EP4 buffer (IN or OUT)
|
__xdata __at 0xF800 volatile BYTE EP6FIFOBUF[1024]; // 512/1024-byte EP6 buffer (IN or OUT)
|
__xdata __at 0xF800 volatile BYTE EP6FIFOBUF[1024]; // 512/1024-byte EP6 buffer (IN or OUT)
|
__xdata __at 0xFC00 volatile BYTE EP8FIFOBUF[1024]; // 512 byte EP8 buffer (IN or OUT)
|
__xdata __at 0xFC00 volatile BYTE EP8FIFOBUF[1024]; // 512 byte EP8 buffer (IN or OUT)
|
|
|
|
|
// Special Function Registers (__sfrs)
|
// Special Function Registers (__sfrs)
|
__sfr __at 0x80 IOA; // Port A
|
__sfr __at 0x80 IOA; // Port A
|
__sbit __at 0x80+0 IOA0; // Port A bit 0
|
__sbit __at 0x80+0 IOA0; // Port A bit 0
|
__sbit __at 0x80+1 IOA1; // Port A bit 1
|
__sbit __at 0x80+1 IOA1; // Port A bit 1
|
__sbit __at 0x80+2 IOA2; // Port A bit 2
|
__sbit __at 0x80+2 IOA2; // Port A bit 2
|
__sbit __at 0x80+3 IOA3; // Port A bit 3
|
__sbit __at 0x80+3 IOA3; // Port A bit 3
|
__sbit __at 0x80+4 IOA4; // Port A bit 4
|
__sbit __at 0x80+4 IOA4; // Port A bit 4
|
__sbit __at 0x80+5 IOA5; // Port A bit 5
|
__sbit __at 0x80+5 IOA5; // Port A bit 5
|
__sbit __at 0x80+6 IOA6; // Port A bit 6
|
__sbit __at 0x80+6 IOA6; // Port A bit 6
|
__sbit __at 0x80+7 IOA7; // Port A bit 7
|
__sbit __at 0x80+7 IOA7; // Port A bit 7
|
__sfr __at 0x81 SP; // Stack Pointer
|
__sfr __at 0x81 SP; // Stack Pointer
|
__sfr __at 0x82 DPL0; // Data Pointer 0 L
|
__sfr __at 0x82 DPL0; // Data Pointer 0 L
|
__sfr __at 0x83 DPH0; // Data Pointer 0 H
|
__sfr __at 0x83 DPH0; // Data Pointer 0 H
|
__sfr __at 0x84 DPL1; // Data Pointer 1 L
|
__sfr __at 0x84 DPL1; // Data Pointer 1 L
|
__sfr __at 0x85 DPH1; // Data Pointer 0 H
|
__sfr __at 0x85 DPH1; // Data Pointer 0 H
|
__sfr __at 0x86 DPS; // Data Pointer 0/1 select
|
__sfr __at 0x86 DPS; // Data Pointer 0/1 select
|
__sfr __at 0x87 PCON; // Power Control
|
__sfr __at 0x87 PCON; // Power Control
|
__sfr __at 0x88 TCON; // Timer/Counter Control
|
__sfr __at 0x88 TCON; // Timer/Counter Control
|
__sbit __at 0x88+0 IT0; // Interrupt 0 Type select
|
__sbit __at 0x88+0 IT0; // Interrupt 0 Type select
|
__sbit __at 0x88+1 IE0; // Interrupt 0 Edge detect
|
__sbit __at 0x88+1 IE0; // Interrupt 0 Edge detect
|
__sbit __at 0x88+2 IT1; // Interrupt 1 Type select
|
__sbit __at 0x88+2 IT1; // Interrupt 1 Type select
|
__sbit __at 0x88+3 IE1; // Interrupt 1 Edge detect
|
__sbit __at 0x88+3 IE1; // Interrupt 1 Edge detect
|
__sbit __at 0x88+4 TR0; // Timer 0 Run Control
|
__sbit __at 0x88+4 TR0; // Timer 0 Run Control
|
__sbit __at 0x88+5 TF0; // Timer 0 Overflow Flag
|
__sbit __at 0x88+5 TF0; // Timer 0 Overflow Flag
|
__sbit __at 0x88+6 TR1; // Timer 1 Run Control
|
__sbit __at 0x88+6 TR1; // Timer 1 Run Control
|
__sbit __at 0x88+7 TF1; // Timer 1 Overflow Flag
|
__sbit __at 0x88+7 TF1; // Timer 1 Overflow Flag
|
__sfr __at 0x89 TMOD; // Timer/Counter Mode Control
|
__sfr __at 0x89 TMOD; // Timer/Counter Mode Control
|
__sfr __at 0x8A TL0; // Timer 0 reload L
|
__sfr __at 0x8A TL0; // Timer 0 reload L
|
__sfr __at 0x8B TL1; // Timer 1 reload L
|
__sfr __at 0x8B TL1; // Timer 1 reload L
|
__sfr __at 0x8C TH0; // Timer 0 reload H
|
__sfr __at 0x8C TH0; // Timer 0 reload H
|
__sfr __at 0x8D TH1; // Timer 1 reload H
|
__sfr __at 0x8D TH1; // Timer 1 reload H
|
__sfr __at 0x8E CKCON; // Clock Control
|
__sfr __at 0x8E CKCON; // Clock Control
|
__sfr __at 0x90 IOB; // Port B
|
__sfr __at 0x90 IOB; // Port B
|
__sbit __at 0x90+0 IOB0; // Port B bit 0
|
__sbit __at 0x90+0 IOB0; // Port B bit 0
|
__sbit __at 0x90+1 IOB1; // Port B bit 1
|
__sbit __at 0x90+1 IOB1; // Port B bit 1
|
__sbit __at 0x90+2 IOB2; // Port B bit 2
|
__sbit __at 0x90+2 IOB2; // Port B bit 2
|
__sbit __at 0x90+3 IOB3; // Port B bit 3
|
__sbit __at 0x90+3 IOB3; // Port B bit 3
|
__sbit __at 0x90+4 IOB4; // Port B bit 4
|
__sbit __at 0x90+4 IOB4; // Port B bit 4
|
__sbit __at 0x90+5 IOB5; // Port B bit 5
|
__sbit __at 0x90+5 IOB5; // Port B bit 5
|
__sbit __at 0x90+6 IOB6; // Port B bit 6
|
__sbit __at 0x90+6 IOB6; // Port B bit 6
|
__sbit __at 0x90+7 IOB7; // Port B bit 7
|
__sbit __at 0x90+7 IOB7; // Port B bit 7
|
__sfr __at 0x91 EXIF; // External Interrupt Flag(s)
|
__sfr __at 0x91 EXIF; // External Interrupt Flag(s)
|
__sfr __at 0x92 MPAGE; // Upper Addr Byte of MOVX using @R0 / @R1
|
__sfr __at 0x92 MPAGE; // Upper Addr Byte of MOVX using @R0 / @R1
|
__sfr __at (0x92) _XPAGE;
|
__sfr __at (0x92) _XPAGE;
|
__sfr __at 0x98 SCON0; // Serial Port 0 Control
|
__sfr __at 0x98 SCON0; // Serial Port 0 Control
|
__sbit __at 0x98+0 RI_0; // Recive Interrupt Flag
|
__sbit __at 0x98+0 RI_0; // Recive Interrupt Flag
|
__sbit __at 0x98+1 TI_0; // Transmit Interrupt Flag
|
__sbit __at 0x98+1 TI_0; // Transmit Interrupt Flag
|
__sbit __at 0x98+2 RB8_0; // State of the 9th bit / Stop Bit received
|
__sbit __at 0x98+2 RB8_0; // State of the 9th bit / Stop Bit received
|
__sbit __at 0x98+3 TB8_0; // State of the 9th bit transmitted
|
__sbit __at 0x98+3 TB8_0; // State of the 9th bit transmitted
|
__sbit __at 0x98+4 REN_0; // Receive enable
|
__sbit __at 0x98+4 REN_0; // Receive enable
|
__sbit __at 0x98+5 SM2_0; // Multiprocessor communication enable
|
__sbit __at 0x98+5 SM2_0; // Multiprocessor communication enable
|
__sbit __at 0x98+6 SM1_0; // Serial Port 0 mode bit 1
|
__sbit __at 0x98+6 SM1_0; // Serial Port 0 mode bit 1
|
__sbit __at 0x98+7 SM0_0; // Serial Port 0 mode bit 0
|
__sbit __at 0x98+7 SM0_0; // Serial Port 0 mode bit 0
|
__sfr __at 0x99 SBUF0; // Serial Port 0 Data Buffer
|
__sfr __at 0x99 SBUF0; // Serial Port 0 Data Buffer
|
__sfr __at 0x9A AUTOPTRH1; // Autopointer 1 Address H
|
__sfr __at 0x9A AUTOPTRH1; // Autopointer 1 Address H
|
__sfr __at 0x9B AUTOPTRL1; // Autopointer 1 Address L
|
__sfr __at 0x9B AUTOPTRL1; // Autopointer 1 Address L
|
__sfr __at 0x9D AUTOPTRH2; // Autopointer 2 Address H
|
__sfr __at 0x9D AUTOPTRH2; // Autopointer 2 Address H
|
__sfr __at 0x9E AUTOPTRL2; // Autopointer 2 Address L
|
__sfr __at 0x9E AUTOPTRL2; // Autopointer 2 Address L
|
__sfr __at 0xA0 IOC; // Port C
|
__sfr __at 0xA0 IOC; // Port C
|
__sbit __at 0xA0+0 IOC0; // Port C bit 0
|
__sbit __at 0xA0+0 IOC0; // Port C bit 0
|
__sbit __at 0xA0+1 IOC1; // Port C bit 1
|
__sbit __at 0xA0+1 IOC1; // Port C bit 1
|
__sbit __at 0xA0+2 IOC2; // Port C bit 2
|
__sbit __at 0xA0+2 IOC2; // Port C bit 2
|
__sbit __at 0xA0+3 IOC3; // Port C bit 3
|
__sbit __at 0xA0+3 IOC3; // Port C bit 3
|
__sbit __at 0xA0+4 IOC4; // Port C bit 4
|
__sbit __at 0xA0+4 IOC4; // Port C bit 4
|
__sbit __at 0xA0+5 IOC5; // Port C bit 5
|
__sbit __at 0xA0+5 IOC5; // Port C bit 5
|
__sbit __at 0xA0+6 IOC6; // Port C bit 6
|
__sbit __at 0xA0+6 IOC6; // Port C bit 6
|
__sbit __at 0xA0+7 IOC7; // Port C bit 7
|
__sbit __at 0xA0+7 IOC7; // Port C bit 7
|
__sfr __at 0xA1 INT2CLR; // Interrupt 2 clear
|
__sfr __at 0xA1 INT2CLR; // Interrupt 2 clear
|
__sfr __at 0xA2 INT4CLR; // Interrupt 4clear
|
__sfr __at 0xA2 INT4CLR; // Interrupt 4clear
|
__sfr __at 0xA8 IE; // Interrupt Enable
|
__sfr __at 0xA8 IE; // Interrupt Enable
|
__sbit __at 0xA8+0 EX0; // Enable external interrupt 0
|
__sbit __at 0xA8+0 EX0; // Enable external interrupt 0
|
__sbit __at 0xA8+1 ET0; // Enable Timer 0 interrupt
|
__sbit __at 0xA8+1 ET0; // Enable Timer 0 interrupt
|
__sbit __at 0xA8+2 EX1; // Enable external interrupt 1
|
__sbit __at 0xA8+2 EX1; // Enable external interrupt 1
|
__sbit __at 0xA8+3 ET1; // Enable Timer 1 interrupt
|
__sbit __at 0xA8+3 ET1; // Enable Timer 1 interrupt
|
__sbit __at 0xA8+4 ES0; // Enable Serial Port 0 interrupt
|
__sbit __at 0xA8+4 ES0; // Enable Serial Port 0 interrupt
|
__sbit __at 0xA8+5 ET2; // Enable Timer 2 interrupt
|
__sbit __at 0xA8+5 ET2; // Enable Timer 2 interrupt
|
__sbit __at 0xA8+6 ES1; // Enable Serial Port 1 interrupt
|
__sbit __at 0xA8+6 ES1; // Enable Serial Port 1 interrupt
|
__sbit __at 0xA8+7 EA; // Global interrupt enable
|
__sbit __at 0xA8+7 EA; // Global interrupt enable
|
__sfr __at 0xAA EP2468STAT; // Endpoint 2,4,6,8 status flags
|
__sfr __at 0xAA EP2468STAT; // Endpoint 2,4,6,8 status flags
|
__sfr __at 0xAB EP24FIFOFLGS; // Endpoint 2,4 slave FIFO flags
|
__sfr __at 0xAB EP24FIFOFLGS; // Endpoint 2,4 slave FIFO flags
|
__sfr __at 0xAC EP68FIFOFLGS; // Endpoint 6,8 slave FIFO flags
|
__sfr __at 0xAC EP68FIFOFLGS; // Endpoint 6,8 slave FIFO flags
|
__sfr __at 0xAF AUTOPTRSETUP; // Autopointer 1&2 set-up
|
__sfr __at 0xAF AUTOPTRSETUP; // Autopointer 1&2 set-up
|
__sfr __at 0xB0 IOD; // Port D
|
__sfr __at 0xB0 IOD; // Port D
|
__sbit __at 0xB0+0 IOD0; // Port D bit 0
|
__sbit __at 0xB0+0 IOD0; // Port D bit 0
|
__sbit __at 0xB0+1 IOD1; // Port D bit 1
|
__sbit __at 0xB0+1 IOD1; // Port D bit 1
|
__sbit __at 0xB0+2 IOD2; // Port D bit 2
|
__sbit __at 0xB0+2 IOD2; // Port D bit 2
|
__sbit __at 0xB0+3 IOD3; // Port D bit 3
|
__sbit __at 0xB0+3 IOD3; // Port D bit 3
|
__sbit __at 0xB0+4 IOD4; // Port D bit 4
|
__sbit __at 0xB0+4 IOD4; // Port D bit 4
|
__sbit __at 0xB0+5 IOD5; // Port D bit 5
|
__sbit __at 0xB0+5 IOD5; // Port D bit 5
|
__sbit __at 0xB0+6 IOD6; // Port D bit 6
|
__sbit __at 0xB0+6 IOD6; // Port D bit 6
|
__sbit __at 0xB0+7 IOD7; // Port D bit 7
|
__sbit __at 0xB0+7 IOD7; // Port D bit 7
|
__sfr __at 0xB1 IOE; // Port E
|
__sfr __at 0xB1 IOE; // Port E
|
__sfr __at 0xB2 OEA; // Port A Output Enable
|
__sfr __at 0xB2 OEA; // Port A Output Enable
|
__sfr __at 0xB3 OEB; // Port B Output Enable
|
__sfr __at 0xB3 OEB; // Port B Output Enable
|
__sfr __at 0xB4 OEC; // Port C Output Enable
|
__sfr __at 0xB4 OEC; // Port C Output Enable
|
__sfr __at 0xB5 OED; // Port D Output Enable
|
__sfr __at 0xB5 OED; // Port D Output Enable
|
__sfr __at 0xB6 OEE; // Port E Output Enable
|
__sfr __at 0xB6 OEE; // Port E Output Enable
|
__sfr __at 0xB8 IP; // Interrupt priority
|
__sfr __at 0xB8 IP; // Interrupt priority
|
__sbit __at 0xB8+0 PX0; // External interrupt 0 priority control
|
__sbit __at 0xB8+0 PX0; // External interrupt 0 priority control
|
__sbit __at 0xB8+1 PT0; // Timer 0 interrupt priority control
|
__sbit __at 0xB8+1 PT0; // Timer 0 interrupt priority control
|
__sbit __at 0xB8+2 PX1; // External interrupt 1 priority control
|
__sbit __at 0xB8+2 PX1; // External interrupt 1 priority control
|
__sbit __at 0xB8+3 PT1; // Timer 1 interrupt priority control
|
__sbit __at 0xB8+3 PT1; // Timer 1 interrupt priority control
|
__sbit __at 0xB8+4 PS0; // Serial Port 0 interrupt priority control
|
__sbit __at 0xB8+4 PS0; // Serial Port 0 interrupt priority control
|
__sbit __at 0xB8+5 PT2; // Timer 2 interrupt priority control
|
__sbit __at 0xB8+5 PT2; // Timer 2 interrupt priority control
|
__sbit __at 0xB8+6 PS1; // Serial Port 1 interrupt priority control
|
__sbit __at 0xB8+6 PS1; // Serial Port 1 interrupt priority control
|
__sfr __at 0xBA EP01STAT; // Endpoint 0&1 Status
|
__sfr __at 0xBA EP01STAT; // Endpoint 0&1 Status
|
__sfr __at 0xBB GPIFTRIG; // Endpoint 2,4,6,8 GPIF slafe FIFO Trigger
|
__sfr __at 0xBB GPIFTRIG; // Endpoint 2,4,6,8 GPIF slafe FIFO Trigger
|
__sfr __at 0xBD GPIFSGLDATH; // GPIF Data H (16-bit mode only)
|
__sfr __at 0xBD GPIFSGLDATH; // GPIF Data H (16-bit mode only)
|
__sfr __at 0xBE GPIFSGLDATLX; // GPIF Data L w/ Trigger
|
__sfr __at 0xBE GPIFSGLDATLX; // GPIF Data L w/ Trigger
|
__sfr __at 0xBF GPIFSGLDATLNOX; // GPIF Data L w/ No Trigger
|
__sfr __at 0xBF GPIFSGLDATLNOX; // GPIF Data L w/ No Trigger
|
__sfr __at 0xC0 SCON1; // Serial Port 1 Control
|
__sfr __at 0xC0 SCON1; // Serial Port 1 Control
|
__sbit __at 0xC0+0 RI_1; // Recive Interrupt Flag
|
__sbit __at 0xC0+0 RI_1; // Recive Interrupt Flag
|
__sbit __at 0xC0+1 TI_1; // Transmit Interrupt Flag
|
__sbit __at 0xC0+1 TI_1; // Transmit Interrupt Flag
|
__sbit __at 0xC0+2 RB8_1; // State of the 9th bit / Stop Bit received
|
__sbit __at 0xC0+2 RB8_1; // State of the 9th bit / Stop Bit received
|
__sbit __at 0xC0+3 TB8_1; // State of the 9th bit transmitted
|
__sbit __at 0xC0+3 TB8_1; // State of the 9th bit transmitted
|
__sbit __at 0xC0+4 REN_1; // Receive enable
|
__sbit __at 0xC0+4 REN_1; // Receive enable
|
__sbit __at 0xC0+5 SM2_1; // Multiprocessor communication enable
|
__sbit __at 0xC0+5 SM2_1; // Multiprocessor communication enable
|
__sbit __at 0xC0+6 SM1_1; // Serial Port 1 mode bit 1
|
__sbit __at 0xC0+6 SM1_1; // Serial Port 1 mode bit 1
|
__sbit __at 0xC0+7 SM0_1; // Serial Port 1 mode bit 0
|
__sbit __at 0xC0+7 SM0_1; // Serial Port 1 mode bit 0
|
__sfr __at 0xC1 SBUF1; // Serial Port 1 Data Buffer
|
__sfr __at 0xC1 SBUF1; // Serial Port 1 Data Buffer
|
__sfr __at 0xC8 T2CON; // Timer/Counter 2 Control
|
__sfr __at 0xC8 T2CON; // Timer/Counter 2 Control
|
__sbit __at 0xC8+0 CPRL2; // Capture/reload flag
|
__sbit __at 0xC8+0 CPRL2; // Capture/reload flag
|
__sbit __at 0xC8+1 CT2; // Counter/Timer select
|
__sbit __at 0xC8+1 CT2; // Counter/Timer select
|
__sbit __at 0xC8+2 TR2; // Timer 2 run control flag
|
__sbit __at 0xC8+2 TR2; // Timer 2 run control flag
|
__sbit __at 0xC8+3 EXEN2; // Timer 2 external enable
|
__sbit __at 0xC8+3 EXEN2; // Timer 2 external enable
|
__sbit __at 0xC8+4 TCLK; // Transmit clock flag
|
__sbit __at 0xC8+4 TCLK; // Transmit clock flag
|
__sbit __at 0xC8+5 RCLK; // Receive clock flag
|
__sbit __at 0xC8+5 RCLK; // Receive clock flag
|
__sbit __at 0xC8+6 EXF2; // Timer 2 external flag
|
__sbit __at 0xC8+6 EXF2; // Timer 2 external flag
|
__sbit __at 0xC8+7 TF2; // Timer 2 overflow flag
|
__sbit __at 0xC8+7 TF2; // Timer 2 overflow flag
|
__sfr __at 0xCA RCAP2L; // Capture for Timer 2, auto-reload, up-counter L
|
__sfr __at 0xCA RCAP2L; // Capture for Timer 2, auto-reload, up-counter L
|
__sfr __at 0xCB RCAP2H; // Capture for Timer 2, auto-reload, up-counter H
|
__sfr __at 0xCB RCAP2H; // Capture for Timer 2, auto-reload, up-counter H
|
__sfr __at 0xCC TL2; // Timer 2 reload L
|
__sfr __at 0xCC TL2; // Timer 2 reload L
|
__sfr __at 0xCD TH2; // Timer 2 reload H
|
__sfr __at 0xCD TH2; // Timer 2 reload H
|
__sfr __at 0xD0 PSW; // Program Status Word
|
__sfr __at 0xD0 PSW; // Program Status Word
|
__sbit __at 0xD0+0 PF; // Parity flag
|
__sbit __at 0xD0+0 PF; // Parity flag
|
__sbit __at 0xD0+1 F1; // User flag 1
|
__sbit __at 0xD0+1 F1; // User flag 1
|
__sbit __at 0xD0+2 OV; // Overflow flag
|
__sbit __at 0xD0+2 OV; // Overflow flag
|
__sbit __at 0xD0+3 RS0; // Register bank select bit 0
|
__sbit __at 0xD0+3 RS0; // Register bank select bit 0
|
__sbit __at 0xD0+4 RS1; // Register bank select bit 1
|
__sbit __at 0xD0+4 RS1; // Register bank select bit 1
|
__sbit __at 0xD0+5 F0; // User flag 0
|
__sbit __at 0xD0+5 F0; // User flag 0
|
__sbit __at 0xD0+6 AC; // Auxiliary carry flag
|
__sbit __at 0xD0+6 AC; // Auxiliary carry flag
|
__sbit __at 0xD0+7 CY; // Carry flag
|
__sbit __at 0xD0+7 CY; // Carry flag
|
__sfr __at 0xD8 EICON; // External Interrupt Control
|
__sfr __at 0xD8 EICON; // External Interrupt Control
|
__sbit __at 0xD8+3 INT6; // External interrupt 6
|
__sbit __at 0xD8+3 INT6; // External interrupt 6
|
__sbit __at 0xD8+4 RESI; // Wakeup interrupt flag
|
__sbit __at 0xD8+4 RESI; // Wakeup interrupt flag
|
__sbit __at 0xD8+5 ERESI; // Enable Resume interrupt
|
__sbit __at 0xD8+5 ERESI; // Enable Resume interrupt
|
__sbit __at 0xD8+7 SMOD1; // Serial Port 1 baud rate doubler enable
|
__sbit __at 0xD8+7 SMOD1; // Serial Port 1 baud rate doubler enable
|
__sfr __at 0xE0 ACC; // Accumulator
|
__sfr __at 0xE0 ACC; // Accumulator
|
__sbit __at 0xE0+0 ACC0; // Accumulator bit 0
|
__sbit __at 0xE0+0 ACC0; // Accumulator bit 0
|
__sbit __at 0xE0+1 ACC1; // Accumulator bit 1
|
__sbit __at 0xE0+1 ACC1; // Accumulator bit 1
|
__sbit __at 0xE0+2 ACC2; // Accumulator bit 2
|
__sbit __at 0xE0+2 ACC2; // Accumulator bit 2
|
__sbit __at 0xE0+3 ACC3; // Accumulator bit 3
|
__sbit __at 0xE0+3 ACC3; // Accumulator bit 3
|
__sbit __at 0xE0+4 ACC4; // Accumulator bit 4
|
__sbit __at 0xE0+4 ACC4; // Accumulator bit 4
|
__sbit __at 0xE0+5 ACC5; // Accumulator bit 5
|
__sbit __at 0xE0+5 ACC5; // Accumulator bit 5
|
__sbit __at 0xE0+6 ACC6; // Accumulator bit 6
|
__sbit __at 0xE0+6 ACC6; // Accumulator bit 6
|
__sbit __at 0xE0+7 ACC7; // Accumulator bit 7
|
__sbit __at 0xE0+7 ACC7; // Accumulator bit 7
|
__sfr __at 0xE8 EIE; // External Interrupt Enable(s)
|
__sfr __at 0xE8 EIE; // External Interrupt Enable(s)
|
__sbit __at 0xE8+0 EUSB; // Enable USB interrupt (USBINT)
|
__sbit __at 0xE8+0 EUSB; // Enable USB interrupt (USBINT)
|
__sbit __at 0xE8+1 EI2C; // Enable I2C bus interrupt (I2CINT)
|
__sbit __at 0xE8+1 EI2C; // Enable I2C bus interrupt (I2CINT)
|
__sbit __at 0xE8+2 EIEX4; // Enable external interrupt 4
|
__sbit __at 0xE8+2 EIEX4; // Enable external interrupt 4
|
__sbit __at 0xE8+3 EIEX5; // Enable external interrupt 5
|
__sbit __at 0xE8+3 EIEX5; // Enable external interrupt 5
|
__sbit __at 0xE8+4 EIEX6; // Enable external interrupt 6
|
__sbit __at 0xE8+4 EIEX6; // Enable external interrupt 6
|
__sfr __at 0xF0 BREG; // B Register
|
__sfr __at 0xF0 BREG; // B Register
|
__sbit __at 0xF0+0 BREG0; // B Register bit 0
|
__sbit __at 0xF0+0 BREG0; // B Register bit 0
|
__sbit __at 0xF0+1 BREG1; // B Register bit 1
|
__sbit __at 0xF0+1 BREG1; // B Register bit 1
|
__sbit __at 0xF0+2 BREG2; // B Register bit 2
|
__sbit __at 0xF0+2 BREG2; // B Register bit 2
|
__sbit __at 0xF0+3 BREG3; // B Register bit 3
|
__sbit __at 0xF0+3 BREG3; // B Register bit 3
|
__sbit __at 0xF0+4 BREG4; // B Register bit 4
|
__sbit __at 0xF0+4 BREG4; // B Register bit 4
|
__sbit __at 0xF0+5 BREG5; // B Register bit 5
|
__sbit __at 0xF0+5 BREG5; // B Register bit 5
|
__sbit __at 0xF0+6 BREG6; // B Register bit 6
|
__sbit __at 0xF0+6 BREG6; // B Register bit 6
|
__sbit __at 0xF0+7 BREG7; // B Register bit 7
|
__sbit __at 0xF0+7 BREG7; // B Register bit 7
|
__sfr __at 0xF8 EIP; // External Interrupt Priority Control
|
__sfr __at 0xF8 EIP; // External Interrupt Priority Control
|
__sbit __at 0xF8+0 PUSB; // USBINT priority control
|
__sbit __at 0xF8+0 PUSB; // USBINT priority control
|
__sbit __at 0xF8+1 PI2C; // I2CINT priority control
|
__sbit __at 0xF8+1 PI2C; // I2CINT priority control
|
__sbit __at 0xF8+2 EIPX4; // External interrupt 4 priority control
|
__sbit __at 0xF8+2 EIPX4; // External interrupt 4 priority control
|
__sbit __at 0xF8+3 EIPX5; // External interrupt 5 priority control
|
__sbit __at 0xF8+3 EIPX5; // External interrupt 5 priority control
|
__sbit __at 0xF8+4 EIPX6; // External interrupt 6 priority control
|
__sbit __at 0xF8+4 EIPX6; // External interrupt 6 priority control
|
|
|
#endif /* EZREGS_H */
|
#endif /* EZREGS_H */
|
|
|
