| Line 2... |
Line 2... |
//
|
//
|
// Filename: port.h
|
// Filename: port.h
|
//
|
//
|
// Project: OpenArty, an entirely open SoC based upon the Arty platform
|
// Project: OpenArty, an entirely open SoC based upon the Arty platform
|
//
|
//
|
// Purpose:
|
// Purpose: Defines the communication parameters necessary for communicating
|
|
// with the device.
|
|
//
|
//
|
//
|
// Creator: Dan Gisselquist, Ph.D.
|
// Creator: Dan Gisselquist, Ph.D.
|
// Gisselquist Technology, LLC
|
// Gisselquist Technology, LLC
|
//
|
//
|
////////////////////////////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////////////////////////////
|
//
|
//
|
// Copyright (C) 2015-2016, Gisselquist Technology, LLC
|
// Copyright (C) 2015-2017, Gisselquist Technology, LLC
|
//
|
//
|
// This program is free software (firmware): you can redistribute it and/or
|
// This program is free software (firmware): you can redistribute it and/or
|
// modify it under the terms of the GNU General Public License as published
|
// modify it under the terms of the GNU General Public License as published
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// your option) any later version.
|
// your option) any later version.
|
| Line 22... |
Line 24... |
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
// for more details.
|
// for more details.
|
//
|
//
|
// You should have received a copy of the GNU General Public License along
|
// You should have received a copy of the GNU General Public License along
|
// with this program. (It's in the $(ROOT)/doc directory, run make with no
|
// with this program. (It's in the $(ROOT)/doc directory. Run make with no
|
// target there if the PDF file isn't present.) If not, see
|
// target there if the PDF file isn't present.) If not, see
|
// <http://www.gnu.org/licenses/> for a copy.
|
// <http://www.gnu.org/licenses/> for a copy.
|
//
|
//
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
// http://www.gnu.org/licenses/gpl.html
|
// http://www.gnu.org/licenses/gpl.html
|
| Line 36... |
Line 38... |
//
|
//
|
//
|
//
|
#ifndef PORT_H
|
#ifndef PORT_H
|
#define PORT_H
|
#define PORT_H
|
|
|
// #define FPGAHOST "lazarus"
|
// There are two ways to connect: via a serial port, and via a TCP socket
|
#define FPGAHOST "jericho"
|
// connected to a serial port. This way, we can connect the device on one
|
// #define FPGAHOST "localhost"
|
// computer, test it, and when/if it doesn't work we can replace the device
|
|
// with the test-bench. Across the network, no one will know any better that
|
|
// anything had changed.
|
|
#define FPGAHOST "localhost"
|
#define FPGATTY "/dev/ttyUSB1"
|
#define FPGATTY "/dev/ttyUSB1"
|
#define FPGAPORT 6510
|
#define FPGAPORT 6510
|
|
|
#ifndef FORCE_UART
|
#ifndef FORCE_UART
|
#define FPGAOPEN(V) V= new FPGA(new NETCOMMS(FPGAHOST, FPGAPORT))
|
#define FPGAOPEN(V) V= new FPGA(new NETCOMMS(FPGAHOST, FPGAPORT))
|
