OpenCores
URL https://opencores.org/ocsvn/plasma/plasma/trunk

Subversion Repositories plasma

[/] [plasma/] [trunk/] [kernel/] [makefile] - Diff between revs 411 and 416

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 411 Rev 416
Line 56... Line 56... 
CFLAGS_SW_MULT = -mno-mul -DUSE_SW_MULT
 
CFLAGS_SW_MULT = -mno-mul -DUSE_SW_MULT
 
 
 
 
 
# Use 16 fewer registers (make reg_bank.vhd smaller)
 
# Use 16 fewer registers (make reg_bank.vhd smaller)
 
CFLAGS_FEW_REGS = -ffixed-t0 -ffixed-t1 -ffixed-t2 -ffixed-t3 -ffixed-t4 -ffixed-t5 -ffixed-t6 -ffixed-t7 -ffixed-s0 -ffixed-s1 -ffixed-s2 -ffixed-s3 -ffixed-s4 -ffixed-s5 -ffixed-s6 -ffixed-s7
 
CFLAGS_FEW_REGS = -ffixed-t0 -ffixed-t1 -ffixed-t2 -ffixed-t3 -ffixed-t4 -ffixed-t5 -ffixed-t6 -ffixed-t7 -ffixed-s0 -ffixed-s1 -ffixed-s2 -ffixed-s3 -ffixed-s4 -ffixed-s5 -ffixed-s6 -ffixed-s7
 
 
 
 
 
CFLAGS = -O2 -Wall -c -s -I$(TOOLS2_DIR) -msoft-float -fno-builtin
 
CFLAGS = -O2 -Wall -c -I$(TOOLS2_DIR) -msoft-float -fno-builtin
 
CFLAGS += -fno-pic -mips1 -mno-abicalls
 
CFLAGS += -fno-pic -mips1 -mno-abicalls
 
#CFLAGS += $(CFLAGS_SW_MULT)
 
#CFLAGS += $(CFLAGS_SW_MULT)
 
#CFLAGS += $(CFLAGS_FEW_REGS)
 
#CFLAGS += $(CFLAGS_FEW_REGS)
 
 
 
#CFLAGS += -Wa,-alhs -g
 
 
 
 
 
# Build just the Plasma RTOS for Plasma CPU
 
# Build just the Plasma RTOS for Plasma CPU
 
rtos:
 
rtos:
 
        $(AS_MIPS) -o boot.o $(TOOLS_DIR)boot.asm
 
        $(AS_MIPS) -o boot.o $(TOOLS_DIR)boot.asm
 
        $(GCC_MIPS) rtos.c
 
        $(GCC_MIPS) rtos.c
 
        $(GCC_MIPS) libc.c
 
        $(GCC_MIPS) libc.c
 
        $(GCC_MIPS) uart.c
 
        $(GCC_MIPS) uart.c
 
        $(GCC_MIPS) rtos_test.c
 
        $(GCC_MIPS) rtos_test.c
 
        $(GCC_MIPS) math.c $(ALIASING)
 
        $(GCC_MIPS) math.c $(ALIASING)
 
        $(LD_MIPS) -Ttext 0x10000000 -eentry -Map test.map -s -N -o test.axf \
 
        $(LD_MIPS) -Ttext 0x10000000 -eentry -Map test.map \
 
 
 
                -s -N -o test.axf \
 
        boot.o rtos.o libc.o uart.o rtos_test.o math.o
 
        boot.o rtos.o libc.o uart.o rtos_test.o math.o
 
        $(CONVERT_BIN)
 
        $(CONVERT_BIN)
 
        @sort test2.map
 
        @sort test2.map
 
        @$(DUMP_MIPS) --disassemble test.axf > test.lst
 
        @$(DUMP_MIPS) --disassemble test.axf > test.lst
 
 
 
 
 
# Build the Plasma RTOS, Plasma TCP/IP stack, and web server for the Plasma CPU
 
# Build the Plasma RTOS, Plasma TCP/IP stack, and web server for the Plasma CPU
 
# Use the serial port and etermip for TCP/IP packets
 
# Use the serial port and etermip for TCP/IP packets
 
rtos_tcpip:
 
rtos_tcpip_uart:
 
        $(AS_MIPS) -o boot.o $(TOOLS_DIR)boot.asm
 
        $(AS_MIPS) -o boot.o $(TOOLS_DIR)boot.asm
 
        $(GCC_MIPS) rtos.c
 
        $(GCC_MIPS) rtos.c
 
        $(GCC_MIPS) libc.c
 
        $(GCC_MIPS) libc.c
 
        $(GCC_MIPS) uart.c
 
        $(GCC_MIPS) uart.c -DUART_PACKETS
 
        $(GCC_MIPS) rtos_test.c -DINCLUDE_HTML -DINCLUDE_CONSOLE
 
        $(GCC_MIPS) rtos_test.c -DINCLUDE_UART_PACKETS
 
        $(GCC_MIPS) math.c $(ALIASING)
 
        $(GCC_MIPS) math.c $(ALIASING)
 
        $(GCC_MIPS) tcpip.c -DINCLUDE_FILESYS
 
        $(GCC_MIPS) tcpip.c
 
        $(GCC_MIPS) http.c -DINCLUDE_FILESYS -DEXAMPLE_HTML
 
        $(GCC_MIPS) http.c -DEXAMPLE_HTML
 
        $(GCC_MIPS) netutil.c
 
        $(GCC_MIPS) netutil.c -DEXCLUDE_FLASH
 
        $(GCC_MIPS) filesys.c
 
        $(GCC_MIPS) filesys.c -DEXCLUDE_FLASH
 
        $(LD_MIPS) -Ttext 0x10000000 -eentry -Map test.map -s -N -o test.axf \
 
        $(LD_MIPS) -Ttext 0x10000000 -eentry -Map test.map \
 
        boot.o rtos.o libc.o uart.o rtos_test.o math.o tcpip.o \
 
                -s -N -o test.axf \
 
        http.o netutil.o filesys.o
 
                boot.o rtos.o libc.o uart.o rtos_test.o math.o \
 
 
 
                tcpip.o http.o netutil.o filesys.o
 
        $(CONVERT_BIN)
 
        $(CONVERT_BIN)
 
        @sort test2.map
 
        @sort test2.map
 
        @$(DUMP_MIPS) --disassemble test.axf > test.lst
 
        @$(DUMP_MIPS) --disassemble test.axf > test.lst
 
 
 
 
 
# Use Ethernet for TCP/IP packets, use flash file system
 
# Use Ethernet for TCP/IP packets, use flash file system
 
rtos_tcpip_eth:
 
rtos_tcpip_eth:
 
        $(AS_MIPS) -o boot.o $(TOOLS_DIR)boot.asm
 
        $(AS_MIPS) -o boot.o $(TOOLS_DIR)boot.asm
 
        $(GCC_MIPS) rtos.c
 
        $(GCC_MIPS) rtos.c
 
        $(GCC_MIPS) libc.c
 
        $(GCC_MIPS) libc.c
 
        $(GCC_MIPS) uart.c -DNO_PACKETS
 
        $(GCC_MIPS) uart.c
 
        $(GCC_MIPS) rtos_test.c -DINCLUDE_ETH -DINCLUDE_CONSOLE
 
        $(GCC_MIPS) rtos_test.c -DINCLUDE_ETH
 
        $(GCC_MIPS) math.c $(ALIASING)
 
        $(GCC_MIPS) math.c $(ALIASING)
 
        $(GCC_MIPS) tcpip.c -DINCLUDE_FILESYS
 
        $(GCC_MIPS) tcpip.c
 
        $(GCC_MIPS) http.c -DINCLUDE_FILESYS -DEXAMPLE_HTML
 
        $(GCC_MIPS) http.c -DEXAMPLE_HTML
 
        $(GCC_MIPS) netutil.c -DINCLUDE_FLASH -DDLL_SETUP
 
        $(GCC_MIPS) netutil.c
 
        $(GCC_MIPS) filesys.c -DINCLUDE_FLASH
 
        $(GCC_MIPS) filesys.c
 
        $(GCC_MIPS) ethernet.c
 
        $(GCC_MIPS) ethernet.c
 
        $(GCC_MIPS) flash.c
 
        $(GCC_MIPS) flash.c
 
        $(LD_MIPS) -Ttext 0x10000000 -eentry -Map test.map -s -N -o test.axf \
 
        $(LD_MIPS) -Ttext 0x10000000 -eentry -Map test.map \
 
        boot.o rtos.o libc.o uart.o rtos_test.o math.o tcpip.o \
 
                -s -N -o test.axf \
 
        http.o netutil.o filesys.o ethernet.o flash.o
 
                boot.o rtos.o libc.o uart.o rtos_test.o math.o \
 
 
 
                tcpip.o http.o netutil.o filesys.o ethernet.o flash.o
 
        $(CONVERT_BIN)
 
        $(CONVERT_BIN)
 
        @sort test2.map
 
        @sort test2.map
 
        @$(DUMP_MIPS) --disassemble test.axf > test.lst
 
        @$(DUMP_MIPS) --disassemble test.axf > test.lst
 
 
 
 
 
# Build full test application.  (Use rtos_tcpip_eth instead.)
 
# Build full test application.  (Use rtos_tcpip_eth instead.)
 
rtosfull:
 
rtosfull:
 
        $(AS_MIPS) -o boot.o $(TOOLS_DIR)boot.asm
 
        $(AS_MIPS) -o boot.o $(TOOLS_DIR)boot.asm
 
        $(GCC_MIPS) rtos.c
 
        $(GCC_MIPS) rtos.c
 
        $(GCC_MIPS) libc.c
 
        $(GCC_MIPS) libc.c
 
        $(GCC_MIPS) uart.c -DNO_PACKETS
 
        $(GCC_MIPS) uart.c
 
        $(GCC_MIPS) rtos_test.c -DINCLUDE_ETH -DINCLUDE_CONSOLE
 
        $(GCC_MIPS) rtos_test.c -DINCLUDE_ETH
 
        $(GCC_MIPS) math.c $(ALIASING)
 
        $(GCC_MIPS) math.c $(ALIASING)
 
        $(GCC_MIPS) tcpip.c -DINCLUDE_FILESYS
 
        $(GCC_MIPS) tcpip.c
 
        $(GCC_MIPS) http.c -DINCLUDE_FILESYS
 
        $(GCC_MIPS) http.c
 
        $(GCC_MIPS) netutil.c -DINCLUDE_FLASH -DDLL_SETUP
 
        $(GCC_MIPS) netutil.c
 
        $(GCC_MIPS) filesys.c -DINCLUDE_FLASH
 
        $(GCC_MIPS) filesys.c
 
        $(GCC_MIPS) ethernet.c
 
        $(GCC_MIPS) ethernet.c
 
        $(GCC_MIPS) flash.c
 
        $(GCC_MIPS) flash.c
 
        $(GCC_MIPS) -I. $(APP_DIR)html.c -DMainThread=HtmlThread
 
        $(GCC_MIPS) -I. $(APP_DIR)html.c -DMainThread=HtmlThread
 
        $(GCC_MIPS) -I. $(APP_DIR)image.c
 
        $(GCC_MIPS) -I. $(APP_DIR)image.c
 
        $(GCC_MIPS) -I. $(APP_DIR)tictac.c
 
        $(GCC_MIPS) -I. $(APP_DIR)tictac.c
 
        $(GCC_MIPS) -I. $(APP_DIR)tic3d.c
 
        $(GCC_MIPS) -I. $(APP_DIR)tic3d.c
 
        $(GCC_MIPS) -I. $(APP_DIR)connect4.c
 
        $(GCC_MIPS) -I. $(APP_DIR)connect4.c
 
        $(LD_MIPS) -Ttext 0x10000000 -eentry -Map test.map -s -N -o test.axf \
 
        $(LD_MIPS) -Ttext 0x10000000 -eentry -Map test.map \
 
        boot.o rtos.o libc.o uart.o rtos_test.o math.o tcpip.o \
 
                -s -N -o test.axf \
 
        http.o netutil.o filesys.o ethernet.o flash.o \
 
                boot.o rtos.o libc.o uart.o rtos_test.o math.o \
 
        html.o image.o tictac.o tic3d.o connect4.o
 
                tcpip.o http.o netutil.o filesys.o ethernet.o \
 
 
 
                flash.o html.o image.o tictac.o tic3d.o connect4.o
 
        $(CONVERT_BIN)
 
        $(CONVERT_BIN)
 
        @sort test2.map
 
        @sort test2.map
 
        @$(DUMP_MIPS) --disassemble test.axf > test.lst
 
        @$(DUMP_MIPS) --disassemble test.axf > test.lst
 
 
 
 
 
# Create a separate Dynamically Linked Library executable
 
# Create a separate Dynamically Linked Library executable
 
# ftp test.bin to /flash/web/dlltest
 
# ftp test.bin to /flash/bin/dlltest
 
# telnet to board and execute "dlltest"
 
# telnet to board and execute "dlltest"
 
dlltest:
 
dlltest:
 
        $(GCC_MIPS) -G0 dlltest.c
 
        $(GCC_MIPS) -G0 dlltest.c
 
        $(LD_MIPS) -Ttext 0x10100000 -s -N -o test.axf dlltest.o
 
        $(LD_MIPS) -Ttext 0x10100000 -s -N -o dlltest.axf dlltest.o
 
        $(CONVERT_BIN)
 
        @echo PlasmaSend > ftp.txt
 
        @$(DUMP_MIPS) --disassemble test.axf > test.lst
 
        @echo password >> ftp.txt
 
 
 
        @echo send dlltest.axf >> ftp.txt
 
 
 
        @echo quit >> ftp.txt
 
 
 
        ftp -s:ftp.txt plasma
 
 
 
 
 
# Test the RTOS running on a PC
 
# Test the RTOS running on a PC (requires Windows)
 
testrtos:
 
testrtos:
 
        @$(CC_X86) $(CFLAGS_X86) rtos.c
 
        @$(CC_X86) $(CFLAGS_X86) rtos.c
 
        @$(CC_X86) $(CFLAGS_X86) rtos_ex.c
 
        @$(CC_X86) $(CFLAGS_X86) rtos_ex.c
 
        @$(CC_X86) $(CFLAGS_X86) libc.c
 
        @$(CC_X86) $(CFLAGS_X86) libc.c
 
        @$(CC_X86) $(CFLAGS_X86) uart.c
 
 
 
        @$(CC_X86) $(CFLAGS_X86) rtos_test.c
 
        @$(CC_X86) $(CFLAGS_X86) rtos_test.c
 
        @$(CC_X86) $(CFLAGS_X86) math.c $(ALIASING)
 
        @$(CC_X86) $(CFLAGS_X86) math.c $(ALIASING)
 
        @$(CC_X86) $(LFLAGS_X86) -o testrtos.exe rtos.$(OBJ) rtos_ex.$(OBJ) libc.$(OBJ) uart.$(OBJ) rtos_test.$(OBJ) math.$(OBJ)
 
        @$(CC_X86) $(LFLAGS_X86) -o testrtos.exe rtos.$(OBJ) rtos_ex.$(OBJ) libc.$(OBJ) rtos_test.$(OBJ) math.$(OBJ)
 
        $(LINUX_PWD)testrtos.exe
 
        $(LINUX_PWD)testrtos.exe
 
 
 
 
 
# Test the TCP/IP protocol stack running on a PC (requires Windows)
 
# Test the TCP/IP protocol stack running on a PC (requires Windows)
 
testip:
 
testip: *.c
 
        @$(CC_X86) $(CFLAGS_X86) tcpip.c
 
        @$(CC_X86) $(CFLAGS_X86) tcpip.c
 
        @$(CC_X86) $(CFLAGS_X86) http.c /DEXAMPLE_HTML
 
        @$(CC_X86) $(CFLAGS_X86) http.c /DEXAMPLE_HTML
 
        @$(CC_X86) $(CFLAGS_X86) netutil.c
 
        @$(CC_X86) $(CFLAGS_X86) netutil.c
 
        @$(CC_X86) $(CFLAGS_X86) filesys.c
 
        @$(CC_X86) $(CFLAGS_X86) filesys.c /DEXCLUDE_FLASH
 
        @$(CC_X86) $(CFLAGS_X86) libc.c /I$(TOOLS_DIR)
 
        @$(CC_X86) $(CFLAGS_X86) libc.c /I$(TOOLS_DIR)
 
        @$(CC_X86) $(CFLAGS_X86) /DSIMULATE_PLASMA $(TOOLS_DIR)etermip.c
 
        @$(CC_X86) $(CFLAGS_X86) /DSIMULATE_PLASMA $(TOOLS_DIR)etermip.c
 
        @$(CC_X86) $(CFLAGS_X86) os_stubs.c
 
        @$(CC_X86) $(CFLAGS_X86) os_stubs.c
 
        @$(CC_X86) -o testip.exe etermip.obj $(TOOLS_DIR)wpcap.lib \
 
        @$(CC_X86) -o testip.exe etermip.obj $(TOOLS_DIR)wpcap.lib \
 
        tcpip.obj http.obj netutil.obj filesys.obj libc.obj os_stubs.obj
 
        tcpip.obj http.obj netutil.obj filesys.obj libc.obj os_stubs.obj
 
        @echo Try http://plasmb/.  Try telnet plasmb.  Try ftp plasmb.
 
        @echo Try http://plasmb/.  Try telnet plasmb.  Try ftp plasmb.
 
        $(LINUX_PWD)testip.exe
 
        $(LINUX_PWD)testip.exe
 
 
 
 
 
 
 
install:
 
 
 
        @echo PlasmaSend > ftp.txt
 
 
 
        @echo password >> ftp.txt
 
 
 
        @echo send test.bin >> ftp.txt
 
 
 
        @echo quit >> ftp.txt
 
 
 
        ftp -s:ftp.txt plasma
 
 
 
        @echo Telnet to plasma and run 'reboot test.bin [flash]'
 
 
 
 
 
clean:
 
clean:
 
        -$(RM) *.o *.obj *.axf *.map *.lst *.hex *.txt *.bin *.exe
 
        -$(RM) *.o *.obj *.axf *.map *.lst *.hex *.txt *.bin *.exe
 
 
 
 
 
# Run a Plasma CPU opcode simulator (can execute rtos target)
 
# Run a Plasma CPU opcode simulator (can execute rtos target)
 
run:
 
run:
 
        @$(TOOLS_DIR)mlite.exe test.bin
 
        @$(TOOLS_DIR)mlite.exe test.bin
 
 
 
 
 
disassemble:
 
disassemble:
 
        -@$(TOOLS_DIR)mlite.exe test.bin BD > test.txt
 
        -@$(TOOLS_DIR)mlite.exe test.bin BD > test.txt
 
 
 
 
 
# Start the EtermIP terminal program to download the code to the Plasma CPU
 
# Start the EtermIP terminal program to download the code to the
 
# and permit an Ethernet packets to be transfered.
 
# Plasma CPU and permit an Ethernet packets to be transfered.
 
download:
 
download:
 
        @echo Reset board before downloading code
 
        @echo Reset board before downloading code
 
        $(TOOLS_DIR)etermip.exe
 
        $(TOOLS_DIR)etermip.exe
 
 
 
 
 
 
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.