///////////////////////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////////////////////////////
|
//
|
|
//
|
//
|
// Filename: sdspisim.cpp
|
// Filename: sdspisim.cpp
|
//
|
//
|
// Project: Wishbone Controlled SD-Card Controller over SPI port
|
// Project: Wishbone Controlled SD-Card Controller over SPI port
|
//
|
//
|
// Purpose: This library simulates the operation of a SPI commanded SD-Card,
|
// Purpose: This library simulates the operation of a SPI commanded SD-Card,
|
// such as might be found on a XuLA2-LX25 board made by xess.com.
|
// such as might be found on a XuLA2-LX25 board made by xess.com.
|
//
|
//
|
// This simulator is for testing use in a Verilator/C++ environment, where
|
// This simulator is for testing use in a Verilator/C++ environment, where
|
// it would be used in place of the actual hardware.
|
// it would be used in place of the actual hardware.
|
//
|
//
|
// Creator: Dan Gisselquist
|
// Creator: Dan Gisselquist, Ph.D.
|
// Gisselquist Technology, LLC
|
// Gisselquist Technology, LLC
|
//
|
//
|
///////////////////////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////////////////////////////
|
//
|
//
|
// Copyright (C) 2015-2016, Gisselquist Technology, LLC
|
// Copyright (C) 2015-2017, Gisselquist Technology, LLC
|
//
|
//
|
// This program is free software (firmware): you can redistribute it and/or
|
// This program is free software (firmware): you can redistribute it and/or
|
// modify it under the terms of the GNU General Public License as published
|
// modify it under the terms of the GNU General Public License as published
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// your option) any later version.
|
// your option) any later version.
|
//
|
//
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
// for more details.
|
// for more details.
|
//
|
//
|
// You should have received a copy of the GNU General Public License along
|
// You should have received a copy of the GNU General Public License along
|
// with this program. (It's in the $(ROOT)/doc directory, run make with no
|
// with this program. (It's in the $(ROOT)/doc directory. Run make with no
|
// target there if the PDF file isn't present.) If not, see
|
// target there if the PDF file isn't present.) If not, see
|
// <http://www.gnu.org/licenses/> for a copy.
|
// <http://www.gnu.org/licenses/> for a copy.
|
//
|
//
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
// http://www.gnu.org/licenses/gpl.html
|
// http://www.gnu.org/licenses/gpl.html
|
//
|
//
|
//
|
//
|
///////////////////////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////////////////////////////
|
|
//
|
|
//
|
#include <stdio.h>
|
#include <stdio.h>
|
#include <string.h>
|
#include <string.h>
|
#include <assert.h>
|
#include <assert.h>
|
#include <stdlib.h>
|
#include <stdlib.h>
|
|
|
#include "sdspisim.h"
|
#include "sdspisim.h"
|
|
|
static const unsigned
|
static const unsigned
|
MICROSECONDS = 80, // Clocks in a microsecond
|
MICROSECONDS = 80, // Clocks in a microsecond
|
MILLISECONDS = MICROSECONDS * 1000,
|
MILLISECONDS = MICROSECONDS * 1000,
|
tRESET = 4*MILLISECONDS; // Just a wild guess
|
tRESET = 4*MILLISECONDS; // Just a wild guess
|
/*
|
/*
|
static const unsigned DEVID = 0x0115,
|
static const unsigned DEVID = 0x0115,
|
DEVESD = 0x014,
|
DEVESD = 0x014,
|
MICROSECONDS = 100,
|
MICROSECONDS = 100,
|
MILLISECONDS = MICROSECONDS * 1000,
|
MILLISECONDS = MICROSECONDS * 1000,
|
SECONDS = MILLISECONDS * 1000,
|
SECONDS = MILLISECONDS * 1000,
|
tW = 50 * MICROSECONDS, // write config cycle time
|
tW = 50 * MICROSECONDS, // write config cycle time
|
tBE = 32 * SECONDS,
|
tBE = 32 * SECONDS,
|
tDP = 10 * SECONDS,
|
tDP = 10 * SECONDS,
|
tRES = 30 * SECONDS,
|
tRES = 30 * SECONDS,
|
// Shall we artificially speed up this process?
|
// Shall we artificially speed up this process?
|
tPP = 12 * MICROSECONDS,
|
tPP = 12 * MICROSECONDS,
|
tSE = 15 * MILLISECONDS;
|
tSE = 15 * MILLISECONDS;
|
// or keep it at the original speed
|
// or keep it at the original speed
|
// tPP = 1200 * MICROSECONDS,
|
// tPP = 1200 * MICROSECONDS,
|
// tSE = 1500 * MILLISECONDS;
|
// tSE = 1500 * MILLISECONDS;
|
*/
|
*/
|
static const unsigned
|
static const unsigned
|
CCS = 1; // 0: SDSC card, 1: SDHC or SDXC card
|
CCS = 1; // 0: SDSC card, 1: SDHC or SDXC card
|
|
|
SDSPISIM::SDSPISIM(void) {
|
SDSPISIM::SDSPISIM(const bool debug) {
|
m_dev = NULL;
|
m_dev = NULL;
|
m_last_sck = 1;
|
m_last_sck = 1;
|
m_block_address = (CCS==1);
|
m_block_address = (CCS==1);
|
m_host_supports_high_capacity = false;
|
m_host_supports_high_capacity = false;
|
m_powerup_busy = -1;
|
m_powerup_busy = -1;
|
m_reset_state = SDSPI_POWERUP_RESET;
|
m_reset_state = SDSPI_POWERUP_RESET;
|
//
|
//
|
m_csd[ 0] = 0; // Normal SDcard, not high capacity
|
m_csd[ 0] = 0; // Normal SDcard, not high capacity
|
m_csd[ 1] = 0x0f;
|
m_csd[ 1] = 0x0f;
|
m_csd[ 2] = 0x0f;
|
m_csd[ 2] = 0x0f;
|
m_csd[ 3] = 0x32; // Can be either 0x32 (25MHz) or 0x5a (50MHz)
|
m_csd[ 3] = 0x32; // Can be either 0x32 (25MHz) or 0x5a (50MHz)
|
m_csd[ 4] = 0x5b; // Could also be 0x07b, if we supported more comands(?)
|
m_csd[ 4] = 0x5b; // Could also be 0x07b, if we supported more comands(?)
|
m_csd[ 5] = 0x59; // 9-> 2^9,or 512 bytes (10->1024, 11->2048, no othrs)
|
m_csd[ 5] = 0x59; // 9-> 2^9,or 512 bytes (10->1024, 11->2048, no othrs)
|
m_csd[ 6] = 0x00; // partial blocks allowed?
|
m_csd[ 6] = 0x00; // partial blocks allowed?
|
m_csd[ 7] = 0x00; // C_SIZE, 2'b00, then top 6 bits
|
m_csd[ 7] = 0x00; // C_SIZE, 2'b00, then top 6 bits
|
m_csd[ 8] = 0; // C_SIZE, 22-bits, mid 8 bits
|
m_csd[ 8] = 0; // C_SIZE, 22-bits, mid 8 bits
|
m_csd[ 9] = 0; // C_SIZE, 22-bits, bottom 8 bits
|
m_csd[ 9] = 0; // C_SIZE, 22-bits, bottom 8 bits
|
m_csd[10] = 0x7f;
|
m_csd[10] = 0x7f;
|
m_csd[11] = 0x80;
|
m_csd[11] = 0x80;
|
m_csd[12] = 0x0a;
|
m_csd[12] = 0x0a;
|
m_csd[13] = 0x40;
|
m_csd[13] = 0x40;
|
m_csd[14] = 0; // R/W: file format, copy, write protect, etc.
|
m_csd[14] = 0; // R/W: file format, copy, write protect, etc.
|
m_csd[15] = cmdcrc(15, m_csd);
|
m_csd[15] = cmdcrc(15, m_csd);
|
|
|
// CID Register
|
// CID Register
|
m_cid[ 0] = 0xba;
|
m_cid[ 0] = 0xba;
|
m_cid[ 1] = 0xd0;
|
m_cid[ 1] = 0xd0;
|
m_cid[ 2] = 0xda;
|
m_cid[ 2] = 0xda;
|
m_cid[ 3] = 0xdd;
|
m_cid[ 3] = 0xdd;
|
m_cid[ 4] = 0;
|
m_cid[ 4] = 0;
|
m_cid[ 5] = 0xde;
|
m_cid[ 5] = 0xde;
|
m_cid[ 6] = 0xad;
|
m_cid[ 6] = 0xad;
|
m_cid[ 7] = 0xbe;
|
m_cid[ 7] = 0xbe;
|
m_cid[ 8] = 0xef;
|
m_cid[ 8] = 0xef;
|
m_cid[ 9] = 0x20;
|
m_cid[ 9] = 0x20;
|
m_cid[10] = 0x16;
|
m_cid[10] = 0x16;
|
m_cid[11] = 0x05;
|
m_cid[11] = 0x05;
|
m_cid[12] = 0x26;
|
m_cid[12] = 0x26;
|
m_cid[13] = 0;
|
m_cid[13] = 0;
|
m_cid[14] = 0;
|
m_cid[14] = 0;
|
m_cid[15] = cmdcrc(15, m_cid);
|
m_cid[15] = cmdcrc(15, m_cid);
|
|
|
// m_write_count = 0;
|
// m_write_count = 0;
|
// m_ireg = m_oreg = 0;
|
// m_ireg = m_oreg = 0;
|
// m_sreg = 0x01c;
|
// m_sreg = 0x01c;
|
// m_creg = 0x001; // Iinitial creg on delivery
|
// m_creg = 0x001; // Iinitial creg on delivery
|
|
|
//
|
//
|
m_reading_data = false;
|
m_reading_data = false;
|
m_have_token = false;
|
m_have_token = false;
|
|
m_debug = debug;
|
}
|
}
|
|
|
void SDSPISIM::load(const char *fname) {
|
void SDSPISIM::load(const char *fname) {
|
m_dev = fopen(fname, "r+b");
|
m_dev = fopen(fname, "r+b");
|
|
|
if (m_dev) {
|
if (m_dev) {
|
unsigned long devln;
|
unsigned long devln;
|
fseek(m_dev, 0l, SEEK_END);
|
fseek(m_dev, 0l, SEEK_END);
|
devln = ftell(m_dev);
|
devln = ftell(m_dev);
|
fseek(m_dev, 0l, SEEK_SET);
|
fseek(m_dev, 0l, SEEK_SET);
|
|
|
m_devblocks = devln>>9;
|
m_devblocks = devln>>9;
|
|
|
printf("SDCARD: NBLOCKS = %ld\n", m_devblocks);
|
if (m_debug) printf("SDCARD: NBLOCKS = %ld\n", m_devblocks);
|
}
|
}
|
}
|
}
|
|
|
int SDSPISIM::operator()(const int csn, const int sck, const int mosi) {
|
int SDSPISIM::operator()(const int csn, const int sck, const int mosi) {
|
// Keep track of a timer to determine when page program and erase
|
// Keep track of a timer to determine when page program and erase
|
// cycles complete.
|
// cycles complete.
|
|
|
/*
|
/*
|
if (m_write_count > 0) {
|
if (m_write_count > 0) {
|
//
|
//
|
}
|
}
|
*/
|
*/
|
|
|
m_delay++;
|
m_delay++;
|
if (m_powerup_busy>0)
|
if (m_powerup_busy>0)
|
m_powerup_busy--;
|
m_powerup_busy--;
|
|
|
if (csn) {
|
if (csn) {
|
m_delay = 0;
|
m_delay = 0;
|
m_cmdidx= 0;
|
m_cmdidx= 0;
|
m_rspidx= 0;
|
m_rspidx= 0;
|
m_bitpos= 0;
|
m_bitpos= 0;
|
m_delay = 0;
|
m_delay = 0;
|
m_busy = false;
|
m_busy = false;
|
m_last_sck = sck;
|
m_last_sck = sck;
|
m_syncd = false;
|
m_syncd = false;
|
m_last_miso = 1;
|
m_last_miso = 1;
|
m_dat_out = 0x0ff;
|
m_dat_out = 0x0ff;
|
// Reset everything when not selected
|
// Reset everything when not selected
|
return 0;
|
return 0;
|
} else if (sck == m_last_sck) {
|
} else if (sck == m_last_sck) {
|
m_last_sck = sck;
|
m_last_sck = sck;
|
return m_last_miso;
|
return m_last_miso;
|
} else if (!m_last_sck) {
|
} else if (!m_last_sck) {
|
// Register our input on the rising edge
|
// Register our input on the rising edge
|
m_mosi = mosi;
|
m_mosi = mosi;
|
m_syncd= true;
|
m_syncd= true;
|
m_last_sck = sck;
|
m_last_sck = sck;
|
return m_last_miso;
|
return m_last_miso;
|
} if (!m_syncd) {
|
} if (!m_syncd) {
|
m_last_sck = sck;
|
m_last_sck = sck;
|
return m_last_miso;
|
return m_last_miso;
|
}
|
}
|
|
|
// Only change our output on the falling edge
|
// Only change our output on the falling edge
|
|
|
m_last_sck = sck;
|
m_last_sck = sck;
|
printf("SDSPI: (%3d) [%d,%d,%d] ", m_delay, csn, sck, m_mosi);
|
if (m_debug) printf("SDSPI: (%3d) [%d,%d,%d] ", m_delay, csn, sck, m_mosi);
|
// assert(m_delay > 20);
|
// assert(m_delay > 20);
|
|
|
m_bitpos++;
|
m_bitpos++;
|
m_dat_in = (m_dat_in<<1)|m_mosi;
|
m_dat_in = (m_dat_in<<1)|m_mosi;
|
|
|
|
|
printf("(bitpos=%d,dat_in=%02x)\n", m_bitpos&7, m_dat_in&0x0ff);
|
if (m_debug) printf("(bitpos=%d,dat_in=%02x)\n", m_bitpos&7, m_dat_in&0x0ff);
|
|
|
if ((m_bitpos&7)==0) {
|
if ((m_bitpos&7)==0) {
|
printf("SDSPI--RX BYTE %02x\n", m_dat_in&0x0ff);
|
if (m_debug) printf("SDSPI--RX BYTE %02x\n", m_dat_in&0x0ff);
|
m_dat_out = 0xff;
|
m_dat_out = 0xff;
|
if (m_reading_data) {
|
if (m_reading_data) {
|
if (m_have_token) {
|
if (m_have_token) {
|
m_block_buf[m_rxloc++] = m_dat_in;
|
m_block_buf[m_rxloc++] = m_dat_in;
|
printf("SDSPI: WR[%3d] = %02x\n", m_rxloc-1,
|
if (m_debug) printf("SDSPI: WR[%3d] = %02x\n", m_rxloc-1,
|
m_dat_in&0x0ff);
|
m_dat_in&0x0ff);
|
if (m_rxloc >= 512+2) {
|
if (m_rxloc >= 512+2) {
|
unsigned crc, rxcrc;
|
unsigned crc, rxcrc;
|
crc = blockcrc(512, m_block_buf);
|
crc = blockcrc(512, m_block_buf);
|
rxcrc = ((m_block_buf[512]&0x0ff)<<8)
|
rxcrc = ((m_block_buf[512]&0x0ff)<<8)
|
|(m_block_buf[513]&0x0ff);
|
|(m_block_buf[513]&0x0ff);
|
|
|
printf("LEN = %d\n", m_rxloc);
|
if (m_debug) printf("LEN = %d\n", m_rxloc);
|
printf("CHECKING CRC: (rx) %04x =? %04x (calc)\n",
|
if (m_debug) printf("CHECKING CRC: (rx) %04x =? %04x (calc)\n",
|
crc, rxcrc);
|
crc, rxcrc);
|
m_reading_data = false;
|
m_reading_data = false;
|
m_have_token = false;
|
m_have_token = false;
|
if (rxcrc == crc)
|
if (rxcrc == crc)
|
m_dat_out = 5;
|
m_dat_out = 5;
|
else {
|
else {
|
m_dat_out = 0x0b;
|
m_dat_out = 0x0b;
|
assert(rxcrc == crc);
|
assert(rxcrc == crc);
|
}
|
}
|
}
|
}
|
} else {
|
} else {
|
if ((m_dat_in&0x0ff) == 0x0fe) {
|
if ((m_dat_in&0x0ff) == 0x0fe) {
|
printf("SDSPI: TOKEN!!\n");
|
if (m_debug) printf("SDSPI: TOKEN!!\n");
|
m_have_token = true;
|
m_have_token = true;
|
m_rxloc = 0;
|
m_rxloc = 0;
|
} else printf("SDSPI: waiting on token\n");
|
} else if (m_debug)
|
|
printf("SDSPI: waiting on token\n");
|
}
|
}
|
} else if (m_cmdidx < 6) {
|
} else if (m_cmdidx < 6) {
|
printf("SDSPI: CMDIDX = %d\n", m_cmdidx);
|
if (m_debug) printf("SDSPI: CMDIDX = %d\n", m_cmdidx);
|
// All commands *must* start with a 01... pair of bits.
|
// All commands *must* start with a 01... pair of bits.
|
if (m_cmdidx == 0)
|
if (m_cmdidx == 0)
|
assert((m_dat_in&0xc0)==0x40);
|
assert((m_dat_in&0xc0)==0x40);
|
|
|
// Record the command for later processing
|
// Record the command for later processing
|
m_cmdbuf[m_cmdidx++] = m_dat_in;
|
m_cmdbuf[m_cmdidx++] = m_dat_in;
|
} else if (m_cmdidx == 6) {
|
} else if (m_cmdidx == 6) {
|
// We're going to start a response from here ...
|
// We're going to start a response from here ...
|
m_rspidx = 0;
|
m_rspidx = 0;
|
m_blkdly = 0;
|
m_blkdly = 0;
|
m_blkidx = SDSPI_MAXBLKLEN;
|
m_blkidx = SDSPI_MAXBLKLEN;
|
|
if (m_debug) {
|
printf("SDSPI: CMDIDX = %d -- WE HAVE A COMMAND! [ ", m_cmdidx);
|
printf("SDSPI: CMDIDX = %d -- WE HAVE A COMMAND! [ ", m_cmdidx);
|
for(int i=0; i<6; i++)
|
for(int i=0; i<6; i++)
|
printf("%02x ", m_cmdbuf[i] & 0xff);
|
printf("%02x ", m_cmdbuf[i] & 0xff);
|
printf("]\n"); fflush(stdout);
|
printf("]\n"); fflush(stdout);
|
|
}
|
|
|
unsigned arg;
|
unsigned arg;
|
arg = ((((((m_cmdbuf[1]<<8)|(m_cmdbuf[2]&0x0ff))<<8)
|
arg = ((((((m_cmdbuf[1]<<8)|(m_cmdbuf[2]&0x0ff))<<8)
|
|(m_cmdbuf[3]&0x0ff))<<8)
|
|(m_cmdbuf[3]&0x0ff))<<8)
|
|(m_cmdbuf[4]&0x0ff));
|
|(m_cmdbuf[4]&0x0ff));
|
arg &= 0x0ffffffff;
|
arg &= 0x0ffffffff;
|
|
|
// Check the CRC
|
// Check the CRC
|
if (!check_cmdcrc(m_cmdbuf)) {
|
if (!check_cmdcrc(m_cmdbuf)) {
|
assert(0 && "BAD CRC");
|
assert(0 && "BAD CRC");
|
m_rspbuf[0] = 0x09;
|
m_rspbuf[0] = 0x09;
|
m_rspdly = 1;
|
m_rspdly = 1;
|
} else if (m_altcmd_flag) {
|
} else if (m_altcmd_flag) {
|
switch(m_cmdbuf[0]&0x03f) {
|
switch(m_cmdbuf[0]&0x03f) {
|
case 41: // ACMD41 -- SD_SEND_OP_COND
|
case 41: // ACMD41 -- SD_SEND_OP_COND
|
// and start initialization sequence
|
// and start initialization sequence
|
assert((m_reset_state == SDSPI_RCVD_CMD8)||(m_reset_state == SDSPI_RCVD_ACMD41)||(m_reset_state == SDSPI_RESET_COMPLETE));
|
assert((m_reset_state == SDSPI_RCVD_CMD8)||(m_reset_state == SDSPI_RCVD_ACMD41)||(m_reset_state == SDSPI_RESET_COMPLETE));
|
if((unsigned)m_powerup_busy>tRESET)
|
if((unsigned)m_powerup_busy>tRESET)
|
|
|
m_powerup_busy = tRESET;
|
m_powerup_busy = tRESET;
|
assert((arg&0x0bfffffff) == 0);
|
assert((arg&0x0bfffffff) == 0);
|
m_rspbuf[0] = (m_powerup_busy)?1:0;
|
m_rspbuf[0] = (m_powerup_busy)?1:0;
|
m_rspdly = 2;
|
m_rspdly = 2;
|
m_host_supports_high_capacity = (m_cmdbuf[1]&0x40)?1:0;
|
m_host_supports_high_capacity = (m_cmdbuf[1]&0x40)?1:0;
|
m_reset_state = (m_powerup_busy)?
|
m_reset_state = (m_powerup_busy)?
|
SDSPI_RCVD_ACMD41
|
SDSPI_RCVD_ACMD41
|
:SDSPI_RESET_COMPLETE;
|
:SDSPI_RESET_COMPLETE;
|
break;
|
break;
|
case 51: // ACMD51
|
case 51: // ACMD51
|
m_block_buf[0] = 0x0fe;
|
m_block_buf[0] = 0x0fe;
|
for(int j=0; j<8; j++)
|
for(int j=0; j<8; j++)
|
m_block_buf[j+1] = m_csd[j];
|
m_block_buf[j+1] = m_csd[j];
|
m_blklen = 8;
|
m_blklen = 8;
|
add_block_crc(m_blklen, m_block_buf);
|
add_block_crc(m_blklen, m_block_buf);
|
|
|
m_blkdly = 0;
|
m_blkdly = 0;
|
m_blkidx = 0;
|
m_blkidx = 0;
|
m_dat_out = 0;
|
m_dat_out = 0;
|
break;
|
break;
|
case 13: // ACMD13
|
case 13: // ACMD13
|
case 22: // ACMD22
|
case 22: // ACMD22
|
case 23: // ACMD23
|
case 23: // ACMD23
|
case 42: // ACMD42
|
case 42: // ACMD42
|
default: // Unimplemented command!
|
default: // Unimplemented command!
|
m_rspbuf[0] = 0x04;
|
m_rspbuf[0] = 0x04;
|
m_rspdly = 4;
|
m_rspdly = 4;
|
fprintf(stderr, "SDSPI ERR: Alt command ACMD%d not implemented!\n", m_cmdbuf[0]&0x03f);
|
fprintf(stderr, "SDSPI ERR: Alt command ACMD%d not implemented!\n", m_cmdbuf[0]&0x03f);
|
assert(0 && "Not Implemented");
|
assert(0 && "Not Implemented");
|
} m_altcmd_flag = false;
|
} m_altcmd_flag = false;
|
} else {
|
} else {
|
m_altcmd_flag = false;
|
m_altcmd_flag = false;
|
memset(m_rspbuf, 0x0ff, SDSPI_RSPLEN);
|
memset(m_rspbuf, 0x0ff, SDSPI_RSPLEN);
|
printf("SDSPI: Received a command 0x%02x (%d)\n",
|
if (m_debug) printf("SDSPI: Received a command 0x%02x (%d)\n",
|
m_cmdbuf[0], m_cmdbuf[0]&0x03f);
|
m_cmdbuf[0], m_cmdbuf[0]&0x03f);
|
switch(m_cmdbuf[0]&0x3f) {
|
switch(m_cmdbuf[0]&0x3f) {
|
case 0: // CMD0 -- GO_IDLE_STATE
|
case 0: // CMD0 -- GO_IDLE_STATE
|
m_rspbuf[0] = 0x01;
|
m_rspbuf[0] = 0x01;
|
m_rspdly = 4;
|
m_rspdly = 4;
|
m_reset_state = SDSPI_CMD0_IDLE;
|
m_reset_state = SDSPI_CMD0_IDLE;
|
break;
|
break;
|
case 1: // CMD1 -- SEND_OP_COND
|
case 1: // CMD1 -- SEND_OP_COND
|
assert((arg&0x0bfffffff) == 0);
|
assert((arg&0x0bfffffff) == 0);
|
m_rspbuf[0] = 0x02;
|
m_rspbuf[0] = 0x02;
|
m_rspdly = 4;
|
m_rspdly = 4;
|
m_host_supports_high_capacity = (m_cmdbuf[1]&0x40)?1:0;
|
m_host_supports_high_capacity = (m_cmdbuf[1]&0x40)?1:0;
|
break;
|
break;
|
case 8: // CMD8 -- SEND_IF_COND
|
case 8: // CMD8 -- SEND_IF_COND
|
assert((arg&0x0fffff000) == 0);
|
assert((arg&0x0fffff000) == 0);
|
m_rspbuf[0] = 0x00;
|
m_rspbuf[0] = 0x00;
|
// See p82 for this format
|
// See p82 for this format
|
m_rspbuf[1] = 0;
|
m_rspbuf[1] = 0;
|
m_rspbuf[2] = 0;
|
m_rspbuf[2] = 0;
|
// If we do not accept the voltage range
|
// If we do not accept the voltage range
|
m_rspbuf[3] = 0;
|
m_rspbuf[3] = 0;
|
// Now, check if we accept it
|
// Now, check if we accept it
|
// We only accept 2.7-3.6V in this
|
// We only accept 2.7-3.6V in this
|
// simulation.
|
// simulation.
|
if ((arg&0x0f00)==0x0100)
|
if ((arg&0x0f00)==0x0100)
|
m_rspbuf[3] = 1;
|
m_rspbuf[3] = 1;
|
m_rspbuf[4] = (char)(arg&0x0ff);
|
m_rspbuf[4] = (char)(arg&0x0ff);
|
m_rspdly = 4;
|
m_rspdly = 4;
|
assert((m_reset_state == SDSPI_CMD0_IDLE)||(m_reset_state == SDSPI_RCVD_CMD8));
|
assert((m_reset_state == SDSPI_CMD0_IDLE)||(m_reset_state == SDSPI_RCVD_CMD8));
|
m_reset_state = SDSPI_RCVD_CMD8;
|
m_reset_state = SDSPI_RCVD_CMD8;
|
break;
|
break;
|
case 9: // CMD9 -- SEND_CSD
|
case 9: // CMD9 -- SEND_CSD
|
// Block read, returning start token,
|
// Block read, returning start token,
|
// 16 bytes, then 2 crc bytes
|
// 16 bytes, then 2 crc bytes
|
assert(m_reset_state == SDSPI_IN_OPERATION);
|
assert(m_reset_state == SDSPI_IN_OPERATION);
|
m_rspbuf[0] = 0x00;
|
m_rspbuf[0] = 0x00;
|
memset(m_block_buf, 0x0ff, SDSPI_MAXBLKLEN);
|
memset(m_block_buf, 0x0ff, SDSPI_MAXBLKLEN);
|
m_block_buf[0] = 0x0fe;
|
m_block_buf[0] = 0x0fe;
|
for(int j=0; j<16; j++)
|
for(int j=0; j<16; j++)
|
m_block_buf[j+1] = m_csd[j];
|
m_block_buf[j+1] = m_csd[j];
|
m_blklen = 16;
|
m_blklen = 16;
|
add_block_crc(m_blklen, m_block_buf);
|
add_block_crc(m_blklen, m_block_buf);
|
|
|
m_blkdly = 60;
|
m_blkdly = 60;
|
m_blkidx = 0;
|
m_blkidx = 0;
|
break;
|
break;
|
case 10: // CMD10 -- SEND_CID
|
case 10: // CMD10 -- SEND_CID
|
// Block read, returning start token,
|
// Block read, returning start token,
|
// 16 bytes, then 2 crc bytes
|
// 16 bytes, then 2 crc bytes
|
assert(m_reset_state == SDSPI_IN_OPERATION);
|
assert(m_reset_state == SDSPI_IN_OPERATION);
|
m_rspbuf[0] = 0x00;
|
m_rspbuf[0] = 0x00;
|
memset(m_block_buf, 0x0ff, SDSPI_MAXBLKLEN);
|
memset(m_block_buf, 0x0ff, SDSPI_MAXBLKLEN);
|
m_block_buf[0] = 0x0fe;
|
m_block_buf[0] = 0x0fe;
|
for(int j=0; j<16; j++)
|
for(int j=0; j<16; j++)
|
m_block_buf[j+1] = m_cid[j];
|
m_block_buf[j+1] = m_cid[j];
|
m_blklen = 16;
|
m_blklen = 16;
|
add_block_crc(m_blklen, m_block_buf);
|
add_block_crc(m_blklen, m_block_buf);
|
|
|
m_blkdly = 60;
|
m_blkdly = 60;
|
m_blkidx = 0;
|
m_blkidx = 0;
|
break;
|
break;
|
case 13: // CMD13 -- SEND_STATUS
|
case 13: // CMD13 -- SEND_STATUS
|
assert(m_reset_state == SDSPI_IN_OPERATION);
|
assert(m_reset_state == SDSPI_IN_OPERATION);
|
m_rspbuf[0] = 0x00;
|
m_rspbuf[0] = 0x00;
|
m_rspbuf[1] = 0x00;
|
m_rspbuf[1] = 0x00;
|
// if (m_wp_fault) m_rspbuf[1]|=0x20;
|
// if (m_wp_fault) m_rspbuf[1]|=0x20;
|
// if (m_err) m_rspbuf[1]|=0x04;
|
// if (m_err) m_rspbuf[1]|=0x04;
|
m_rspdly = 4;
|
m_rspdly = 4;
|
break;
|
break;
|
case 17: // CMD17 -- READ_SINGLE_BLOCK
|
case 17: // CMD17 -- READ_SINGLE_BLOCK
|
assert(m_reset_state == SDSPI_IN_OPERATION);
|
assert(m_reset_state == SDSPI_IN_OPERATION);
|
m_rspbuf[0] = 0x00;
|
m_rspbuf[0] = 0x00;
|
memset(m_block_buf, 0x0ff, SDSPI_MAXBLKLEN);
|
memset(m_block_buf, 0x0ff, SDSPI_MAXBLKLEN);
|
if (m_dev) {
|
if (m_dev) {
|
printf("Reading from block %08x of %08lx\n", arg, m_devblocks);
|
if (m_debug) printf("Reading from block %08x of %08lx\n", arg, m_devblocks);
|
if (m_block_address) {
|
if (m_block_address) {
|
assert(arg < m_devblocks);
|
assert(arg < m_devblocks);
|
fseek(m_dev, arg<<9, SEEK_SET);
|
fseek(m_dev, arg<<9, SEEK_SET);
|
} else {
|
} else {
|
assert(arg < m_devblocks<<9);
|
assert(arg < m_devblocks<<9);
|
fseek(m_dev, arg, SEEK_SET);
|
fseek(m_dev, arg, SEEK_SET);
|
}
|
}
|
} m_block_buf[0] = 0x0fe;
|
} m_block_buf[0] = 0x0fe;
|
m_blklen = 512; // (1<<m_csd[5]);
|
m_blklen = 512; // (1<<m_csd[5]);
|
if (m_dev)
|
if (m_dev)
|
fread(&m_block_buf[1], m_blklen, 1, m_dev);
|
m_blklen = fread(&m_block_buf[1], m_blklen, 1, m_dev);
|
else
|
else
|
memset(&m_block_buf[1], 0, m_blklen);
|
memset(&m_block_buf[1], 0, m_blklen);
|
|
m_blklen = (m_blklen != 512) ? 512 : m_blklen;
|
add_block_crc(m_blklen, m_block_buf);
|
add_block_crc(m_blklen, m_block_buf);
|
|
|
m_blkdly = 60;
|
m_blkdly = 60;
|
m_blkidx = 0;
|
m_blkidx = 0;
|
break;
|
break;
|
case 24: // CMD24 -- WRITE_BLOCK
|
case 24: // CMD24 -- WRITE_BLOCK
|
m_reading_data = true;
|
m_reading_data = true;
|
m_have_token = false;
|
m_have_token = false;
|
m_dat_out = 0;
|
m_dat_out = 0;
|
break;
|
break;
|
case 55: // CMD55 -- APP_CMD
|
case 55: // CMD55 -- APP_CMD
|
m_rspbuf[0] = 0x00;
|
m_rspbuf[0] = 0x00;
|
m_rspdly = 2;
|
m_rspdly = 2;
|
m_altcmd_flag = true;
|
m_altcmd_flag = true;
|
break;
|
break;
|
case 58: // CMD58 -- READ_OCR, respond R7
|
case 58: // CMD58 -- READ_OCR, respond R7
|
// argument is stuff bits/dont care
|
// argument is stuff bits/dont care
|
m_rspbuf[0] = 0x00;
|
m_rspbuf[0] = 0x00;
|
// See p112, Tbl 5-1 for this format
|
// See p112, Tbl 5-1 for this format
|
m_rspbuf[1] = ((m_powerup_busy)?0x80:0)
|
m_rspbuf[1] = ((m_powerup_busy)?0x80:0)
|
|(CCS?0x40:0);
|
|(CCS?0x40:0);
|
m_rspbuf[2] = 0xff;// 2.7-3.6V supported
|
m_rspbuf[2] = 0xff;// 2.7-3.6V supported
|
m_rspbuf[3] = 0x80;
|
m_rspbuf[3] = 0x80;
|
m_rspbuf[4] = 0; // No low-voltage supt
|
m_rspbuf[4] = 0; // No low-voltage supt
|
m_rspdly = 4;
|
m_rspdly = 4;
|
|
|
if (m_reset_state == SDSPI_RESET_COMPLETE)
|
if (m_reset_state == SDSPI_RESET_COMPLETE)
|
m_reset_state = SDSPI_IN_OPERATION;
|
m_reset_state = SDSPI_IN_OPERATION;
|
break;
|
break;
|
case 6: // CMD6 -- SWITCH_FUNC
|
case 6: // CMD6 -- SWITCH_FUNC
|
case 12: // CMD12 -- STOP_TRANSMISSION (!impl)
|
case 12: // CMD12 -- STOP_TRANSMISSION (!impl)
|
case 16: // CMD16 -- SET_BLOCKLEN
|
case 16: // CMD16 -- SET_BLOCKLEN
|
case 18: // CMD18 -- READ_MULTIPLE_BLOCK
|
case 18: // CMD18 -- READ_MULTIPLE_BLOCK
|
case 25: // CMD25 -- WRITE_MULTIPLE_BLOCK
|
case 25: // CMD25 -- WRITE_MULTIPLE_BLOCK
|
case 27: // CMD27 -- PROGRAM_CSD
|
case 27: // CMD27 -- PROGRAM_CSD
|
case 32: // CMD32 -- ERASE_WR_BLK_START_ADDR
|
case 32: // CMD32 -- ERASE_WR_BLK_START_ADDR
|
case 33: // CMD33 -- ERASE_WR_BLK_END_ADDR
|
case 33: // CMD33 -- ERASE_WR_BLK_END_ADDR
|
case 38: // CMD38 -- ERASE
|
case 38: // CMD38 -- ERASE
|
case 56: // CMD56 -- GEN_CMD
|
case 56: // CMD56 -- GEN_CMD
|
default: // Unimplemented command
|
default: // Unimplemented command
|
m_rspbuf[0] = 0x04;
|
m_rspbuf[0] = 0x04;
|
m_rspdly = 4;
|
m_rspdly = 4;
|
printf("SDSPI ERR: Command CMD%d not implemented!\n", m_cmdbuf[0]&0x03f);
|
if (m_debug) printf("SDSPI ERR: Command CMD%d not implemented!\n", m_cmdbuf[0]&0x03f);
|
fflush(stdout);
|
fflush(stdout);
|
assert(0 && "Not Implemented");
|
assert(0 && "Not Implemented");
|
}
|
}
|
} m_cmdidx++;
|
} m_cmdidx++;
|
|
|
// If we are using blocks, add bytes for the start
|
// If we are using blocks, add bytes for the start
|
// token and the two CRC bytes
|
// token and the two CRC bytes
|
m_blklen += 3;
|
m_blklen += 3;
|
} else if (m_rspdly > 0) {
|
} else if (m_rspdly > 0) {
|
assert((m_dat_in&0x0ff) == 0x0ff);
|
assert((m_dat_in&0x0ff) == 0x0ff);
|
// A delay until a response is given
|
// A delay until a response is given
|
if (m_busy)
|
if (m_busy)
|
m_dat_out = 0;
|
m_dat_out = 0;
|
m_rspdly--;
|
m_rspdly--;
|
} else if (m_rspidx < SDSPI_RSPLEN) {
|
} else if (m_rspidx < SDSPI_RSPLEN) {
|
assert((m_dat_in&0x0ff) == 0x0ff);
|
assert((m_dat_in&0x0ff) == 0x0ff);
|
m_dat_out = m_rspbuf[m_rspidx++];
|
m_dat_out = m_rspbuf[m_rspidx++];
|
} else if (m_blkdly > 0) {
|
} else if (m_blkdly > 0) {
|
assert((m_dat_in&0x0ff) == 0x0ff);
|
assert((m_dat_in&0x0ff) == 0x0ff);
|
m_blkdly--;
|
m_blkdly--;
|
} else if (m_blkidx < SDSPI_MAXBLKLEN) {
|
} else if (m_blkidx < SDSPI_MAXBLKLEN) {
|
assert((m_dat_in&0x0ff) == 0x0ff);
|
assert((m_dat_in&0x0ff) == 0x0ff);
|
m_dat_out = m_block_buf[m_blkidx++];
|
m_dat_out = m_block_buf[m_blkidx++];
|
}
|
}
|
// else m_dat_out = 0x0ff; // So set already above
|
// else m_dat_out = 0x0ff; // So set already above
|
}
|
}
|
|
|
int result = (m_dat_out&0x80)?1:0;
|
int result = (m_dat_out&0x80)?1:0;
|
m_dat_out <<= 1;
|
m_dat_out <<= 1;
|
m_delay = 0;
|
m_delay = 0;
|
m_last_miso = result;
|
m_last_miso = result;
|
fflush(stdout);
|
fflush(stdout);
|
return result;
|
return result;
|
}
|
}
|
|
|
unsigned SDSPISIM::cmdcrc(int len, char *buf) const {
|
unsigned SDSPISIM::cmdcrc(int len, char *buf) const {
|
unsigned int fill = 0, taps = 0x12;
|
unsigned int fill = 0, taps = 0x12;
|
|
|
for(int i=0; i<len; i++) {
|
for(int i=0; i<len; i++) {
|
fill ^= buf[i];
|
fill ^= buf[i];
|
for(int j=0; j<8; j++) {
|
for(int j=0; j<8; j++) {
|
if (fill&0x80)
|
if (fill&0x80)
|
fill = (fill<<1)^taps;
|
fill = (fill<<1)^taps;
|
else
|
else
|
fill <<= 1;
|
fill <<= 1;
|
}
|
}
|
}
|
}
|
|
|
fill &= 0x0fe; fill |= 1;
|
fill &= 0x0fe; fill |= 1;
|
return fill;
|
return fill;
|
}
|
}
|
|
|
bool SDSPISIM::check_cmdcrc(char *buf) const {
|
bool SDSPISIM::check_cmdcrc(char *buf) const {
|
unsigned fill = cmdcrc(5, buf);
|
unsigned fill = cmdcrc(5, buf);
|
printf("SDSPI: CRC-CHECK, should have a CRC of %02x\n", fill);
|
if (m_debug) printf("SDSPI: CRC-CHECK, should have a CRC of %02x\n", fill);
|
return (fill == (buf[5]&0x0ff));
|
return (fill == (buf[5]&0x0ff));
|
}
|
}
|
|
|
unsigned SDSPISIM::blockcrc(int len, char *buf) const {
|
unsigned SDSPISIM::blockcrc(int len, char *buf) const {
|
unsigned int fill = 0, taps = 0x1021;
|
unsigned int fill = 0, taps = 0x1021;
|
bool dbg = (len == 512);
|
bool dbg = (len == 512);
|
|
|
for(int i=0; i<len; i++) {
|
for(int i=0; i<len; i++) {
|
if (dbg) { printf("BUF[%3d] = %02x\n", i, buf[i]&0x0ff); }
|
if (dbg) { printf("BUF[%3d] = %02x\n", i, buf[i]&0x0ff); }
|
fill ^= ((buf[i]&0x0ff) << 8);
|
fill ^= ((buf[i]&0x0ff) << 8);
|
for(int j=0; j<8; j++) {
|
for(int j=0; j<8; j++) {
|
if (fill&0x8000)
|
if (fill&0x8000)
|
fill = (fill<<1)^taps;
|
fill = (fill<<1)^taps;
|
else
|
else
|
fill <<= 1;
|
fill <<= 1;
|
}
|
}
|
}
|
}
|
|
|
fill &= 0x0ffff;
|
fill &= 0x0ffff;
|
if (dbg) { printf("BLOCKCRC(%d,??) = %04x\n", len, fill); }
|
if (dbg) { printf("BLOCKCRC(%d,??) = %04x\n", len, fill); }
|
return fill;
|
return fill;
|
}
|
}
|
|
|
void SDSPISIM::add_block_crc(int len, char *buf) const {
|
void SDSPISIM::add_block_crc(int len, char *buf) const {
|
unsigned fill = blockcrc(len, &buf[1]);
|
unsigned fill = blockcrc(len, &buf[1]);
|
|
|
buf[len+1] = (fill >> 8)&0x0ff;
|
buf[len+1] = (fill >> 8)&0x0ff;
|
buf[len+2] = (fill )&0x0ff;
|
buf[len+2] = (fill )&0x0ff;
|
}
|
}
|
|
|
|
|
