URL
https://opencores.org/ocsvn/an-fpga-implementation-of-low-latency-noc-based-mpsoc/an-fpga-implementation-of-low-latency-noc-based-mpsoc/trunk
Subversion Repositories an-fpga-implementation-of-low-latency-noc-based-mpsoc
[/] [an-fpga-implementation-of-low-latency-noc-based-mpsoc/] [trunk/] [mpsoc/] [perl_gui/] [lib/] [ip/] [Display/] [lcd_2x16.IP] - Rev 48
Compare with Previous | Blame | View Log
#######################################################################
## File: lcd_2x16.IP
##
## Copyright (C) 2014-2019 Alireza Monemi
##
## This file is part of ProNoC 1.9.1
##
## WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT
## MAY CAUSE UNEXPECTED BEHAIVOR.
################################################################################
$ipgen = bless( {
'ports_order' => [
'clk',
'reset',
's_dat_i',
's_addr_i',
's_stb_i',
's_cyc_i',
's_we_i',
's_dat_o',
's_ack_o',
'lcd_en',
'lcd_rs',
'lcd_rw',
'lcd_data'
],
'gui_status' => {
'status' => 'ideal',
'timeout' => 0
},
'description' => '2x16 Character Alphabet Liquid Crystal Display (LCD) driver module ',
'sw_files' => [],
'modules' => {
'lcd_2x16' => {}
},
'plugs' => {
'wb_slave' => {
'value' => 1,
'0' => {
'name' => 'wb',
'width' => 5,
'addr' => '0x9100_0000 0x91ff_ffff General-Purpose I/O'
},
'type' => 'num',
'wb_slave' => {}
},
'clk' => {
'clk' => {},
'value' => 1,
'type' => 'num',
'0' => {
'name' => 'clk'
}
},
'reset' => {
'0' => {
'name' => 'reset'
},
'type' => 'num',
'reset' => {},
'value' => 1
}
},
'system_h' => '#define ${IP}_WR_CMD (*((volatile unsigned int *) ($BASE)))
#define ${IP}_RD_CMD (*((volatile unsigned int *) ($BASE+4)))
#define ${IP}_WR_DATA (*((volatile unsigned int *) ($BASE+8)))
#define ${IP}_RD_DATA (*((volatile unsigned int *) ($BASE+16)))
#define ${IP}_CLK_MHZ $CLK_MHZ
#define ${IP}_WAIT_CNT (${IP}_CLK_MHZ*100)
#define ${IP}_COLUMN_NUM 16
#define ${IP}_ROW_NUM 2
const char base_y[4]={0x80,0xc0,${IP}_COLUMN_NUM+0x80,${IP}_COLUMN_NUM+0xc0};
#define ${IP}_set_8_bit_1_line() ${IP}_wr_cmd_func(0x30)
#define ${IP}_set_8_bit_2_line() ${IP}_wr_cmd_func(0x38)
#define ${IP}_set_4_bit_1_line() ${IP}_wr_cmd_func(0x20)
#define ${IP}_set_4_bit_3_line() ${IP}_wr_cmd_func(0x28)
#define ${IP}_entry_mode() ${IP}_wr_cmd_func(0x06)
//(clearing display without clearing ddram content)
#define ${IP}_dsply_off_cursor_off() ${IP}_wr_cmd_func(0x08)
#define ${IP}_dsply_on_cursor_on() ${IP}_wr_cmd_func(0x0e)
#define ${IP}_dsply_on_cursor_off() ${IP}_wr_cmd_func(0x0c)
#define ${IP}_dsply_on_cursor_blink() ${IP}_wr_cmd_func(0x0f)
#define ${IP}_shift_dsply_left() ${IP}_wr_cmd_func(0x18)
#define ${IP}_shift_dsply_right() ${IP}_wr_cmd_func(0x1c)
#define ${IP}_shift_cursor_left() ${IP}_wr_cmd_func(0x10)
#define ${IP}_shift_cursor_right() ${IP}_wr_cmd_func(0x14)
//(also clear ddram content)
#define ${IP}_clr_dsply() ${IP}_wr_cmd_func(0x01)
#define ${IP}_goto_line(line_num) ${IP}_wr_cmd_func(base_y[line_num-1]) // 1<= lines num <= ${IP}_ROW_NUM
#define ${IP}_gotoxy(x,y) ${IP}_wr_cmd_func(base_y[y]+x)// 0<= x< ${IP}_COLUMN_NUM; 0<= y < ${IP}_ROW_NUM
#define ${IP}_show_character(c) ${IP}_wr_data_func(c);
void ${IP}_wait(unsigned int volatile num);
static inline void ${IP}_wr_cmd_func( char data){
${IP}_WR_CMD= data;
${IP}_wait(${IP}_WAIT_CNT);
}
static inline void ${IP}_wr_data_func( char data){
${IP}_WR_DATA=data;
${IP}_wait(${IP}_WAIT_CNT);
}
void ${IP}_init(void);
void ${IP}_show_text(char* Text, unsigned char length);
',
'parameters_order' => [
'Dw',
'Aw',
'CLK_MHZ'
],
'category' => 'Display',
'ports' => {
'lcd_rw' => {
'intfc_port' => 'IO',
'intfc_name' => 'IO',
'range' => '',
'type' => 'output'
},
'lcd_en' => {
'type' => 'output',
'range' => '',
'intfc_name' => 'IO',
'intfc_port' => 'IO'
},
's_dat_i' => {
'range' => 'Dw-1 : 0',
'intfc_name' => 'plug:wb_slave[0]',
'type' => 'input',
'intfc_port' => 'dat_i'
},
's_cyc_i' => {
'intfc_port' => 'cyc_i',
'intfc_name' => 'plug:wb_slave[0]',
'range' => '',
'type' => 'input'
},
'reset' => {
'intfc_port' => 'reset_i',
'type' => 'input',
'intfc_name' => 'plug:reset[0]',
'range' => ''
},
'lcd_data' => {
'intfc_port' => 'IO',
'intfc_name' => 'IO',
'range' => ' 7: 0',
'type' => 'inout'
},
's_addr_i' => {
'type' => 'input',
'range' => 'Aw-1 : 0',
'intfc_name' => 'plug:wb_slave[0]',
'intfc_port' => 'adr_i'
},
'lcd_rs' => {
'intfc_port' => 'IO',
'range' => '',
'intfc_name' => 'IO',
'type' => 'output'
},
's_ack_o' => {
'intfc_port' => 'ack_o',
'intfc_name' => 'plug:wb_slave[0]',
'range' => '',
'type' => 'output'
},
'clk' => {
'intfc_port' => 'clk_i',
'type' => 'input',
'intfc_name' => 'plug:clk[0]',
'range' => ''
},
's_dat_o' => {
'range' => 'Dw-1 : 0',
'intfc_name' => 'plug:wb_slave[0]',
'type' => 'output',
'intfc_port' => 'dat_o'
},
's_stb_i' => {
'type' => 'input',
'intfc_name' => 'plug:wb_slave[0]',
'range' => '',
'intfc_port' => 'stb_i'
},
's_we_i' => {
'range' => '',
'intfc_name' => 'plug:wb_slave[0]',
'type' => 'input',
'intfc_port' => 'we_i'
}
},
'sw_params_list' => [],
'module_name' => 'lcd_2x16',
'ip_name' => 'lcd_2x16',
'file_name' => 'mpsoc/rtl/src_peripheral/display/lcd_2x16/lcd_2x16.v',
'system_c' => '
void ${IP}_wait(unsigned int volatile num){
while (num>0){
num--;
asm volatile ("nop");
}
return;
}
void ${IP}_init(void)
{
${IP}_set_8_bit_2_line();
${IP}_dsply_on_cursor_off();
${IP}_clr_dsply();
${IP}_entry_mode();
${IP}_goto_line(1);
}
void ${IP}_show_text(char* Text, unsigned char length){
int i;
for(i=0;i<length;i++) ${IP}_show_character(Text[i]);
}
#ifdef ${IP}_TEST_ENABLE
//-------------------------------------------------------------------------
void ${IP}_test(){
unsigned int x,y;
// Initial ${IP}
${IP}_init();
// Show Text to ${IP}
for(y=1;y<=${IP}_ROW_NUM;y++) {
${IP}_goto_line(y);
${IP}_show_text((char*)test_text[y-1],16);
}
${IP}_wait(1000*${IP}_WAIT_CNT);
${IP}_clr_dsply();
for(y=0;y<${IP}_ROW_NUM;y++){
for(x=0;x<${IP}_COLUMN_NUM;x++){
${IP}_gotoxy(x,y);
${IP}_show_character(test_text[y][x]);
${IP}_wait(500*${IP}_WAIT_CNT);
}
}
}
#endif',
'hdl_files' => [
'/mpsoc/rtl/src_peripheral/display/lcd_2x16/lcd_2x16.v'
],
'parameters' => {
'Dw' => {
'default' => ' 8',
'content' => '',
'global_param' => 0,
'redefine_param' => 1,
'info' => undef,
'type' => 'Fixed'
},
'CLK_MHZ' => {
'default' => '100',
'content' => '2,1000,2',
'redefine_param' => 1,
'global_param' => 0,
'info' => 'The LCD controller clock speed in MHZ. It will be used for measuring the lcd enable delay. You can define a larger value than the actual clk speed but not smaller.',
'type' => 'Spin-button'
},
'Aw' => {
'content' => '',
'redefine_param' => 1,
'global_param' => 0,
'default' => ' 2',
'type' => 'Fixed',
'info' => undef
}
},
'version' => 3,
'unused' => {
'plug:wb_slave[0]' => [
'cti_i',
'rty_o',
'tag_i',
'err_o',
'bte_i',
'sel_i'
]
},
'gen_sw_files' => [
'frename_sep_t'
]
}, 'ip_gen' );