OpenCores
URL https://opencores.org/ocsvn/lcd1/lcd1/trunk

Subversion Repositories lcd1

[/] [lcd1/] [trunk/] [Makefile] - Rev 6

Compare with Previous | Blame | View Log

##############################################################################################
#  In order to create a new project, change the first three macros in this file, the content #
#               of the UCF file and the name and content of the VHD files in src             #
#       Don't forget to execute "source bin/load_modules" manual from the shell              #
##############################################################################################

TOP=topEntity#change to the name of the TOP-Entity
DEVICE=xc3s4000-fg676-4#change to the device id found on the chip
VHDLSYNFILES=src/asci_types.vhd src/lcd1.vhd src/generic_freq_div.vhd src/components.vhd src/$(TOP).vhd#list all vhdl files in the project that have to be synthesized

OPTMODE=Speed
OPTLEVEL=1
EFFORT=high
UCF=src/$(TOP).ucf
SCRIPTFILE=$(TOP).scr
PROJECTFILE=$(TOP).prj
LOGFILE=$(TOP).log
TOPSIM=$(TOP)_tb
DOFILE=src/$(TOP).do
BITGEN=src/$(TOP).ut
ALLFILES=$(VHDLSYNFILES) src/$(TOPSIM).vhd
SHELL=/bin/bash

all: help

help:
        @echo
        @echo " make help                       : prints this help menu "
        @echo " make use-vsim                   : simulate with Modelsim in batch mode, use >>do it<< to reload"
        @echo " make use-vsim-gui               : simulate with Modelsim and GUI"
        @echo " make use-xst                    : synthesize with xst "
        @echo " make implement                  : final step"
        @echo " make ml                 : prints loaded modules. Use source bin/load_modules if modules are not loaded "
        @echo " make files                      : prints info about the used files "
        @echo " make vsim-help                  : prints appropriate steps for simulation"
        @echo " make warnings-xst               : prints warnings and info from the XST log file"
        @echo " make warnings-implement         : prints warnings and info from the PAR log file" 
        @echo " make clear                      : clears all XST output files"
        @echo

use-xst: $(VHDLSYNFILES)
        @rm -f $(SCRIPTFILE)
        @rm -f $(LOGFILE)
        @rm -f $(PROJECTFILE)
        @for i in $(VHDLSYNFILES); do bin/xstvhdl $$i >> $(PROJECTFILE); done
        @echo run -ifn $(PROJECTFILE) -ifmt vhdl -ofn $(TOP).ngc -ofmt NGC -p $(DEVICE) -opt_mode $(OPTMODE) -opt_level $(OPTLEVEL) -top $(TOP) -rtlview yes > $(SCRIPTFILE)
        @xst -ifn $(SCRIPTFILE) -ofn $(LOGFILE)

implement: $(TOP).ngc
        @mv -f src/*.ucf $(UCF)TMP 
        @mv -f $(UCF)TMP $(UCF)
        @mv -f src/*.ut $(BITGEN)TMP
        @mv -f $(BITGEN)TMP $(BITGEN)
        bin/route_ngc $(TOP) $(UCF) $(DEVICE) $(EFFORT) $(BITGEN)

ml:
        @/home/4all/packages/modules-2.0/sun5/bin/modulecmd tcsh list

use-vsim: it $(ALLFILES)
        @rm -f it
        @for i in $(ALLFILES); do bin/vscript $$i >> it0; done
        @echo restart > it1
        @echo run -all > it2
        @cat it0 it1 it2 > it
        @rm -f it0 it1 it2
        @vmap -del work
        @rm -rf modelsim/
        @mkdir modelsim
        @vlib modelsim/work
        @vmap work modelsim/work
        @vcom -93 -check_synthesis -work work $(VHDLSYNFILES)
        @vcom -93 -work work src/$(TOPSIM).vhd
        @mv -f src/*.do $(DOFILE)TMP
        @mv -f $(DOFILE)TMP $(DOFILE)
        vsim -c work.$(TOPSIM) -do $(DOFILE)

use-vsim-gui: $(ALLFILES)
        @rm -f it
        @for i in $(ALLFILES); do bin/vscript $$i >> it0; done
        @echo restart > it1
        @echo run 1000 ns > it2
        @cat it0 it1 it2 > it
        @rm -f it0 it1 it2
        @vmap -del work
        @rm -rf modelsim/
        @mkdir modelsim
        @vlib modelsim/work
        @vmap work modelsim/work
        @vcom -93 -check_synthesis -work work $(VHDLSYNFILES)
        @vcom -93 -work work src/$(TOPSIM).vhd
        @mv -f src/*.do $(DOFILE)TMP
        @mv -f $(DOFILE)TMP $(DOFILE)
#       vsim -gui work.$(TOPSIM) -do $(DOFILE) &
        vsim -gui work.$(TOPSIM) -do it &

clear:
        @rm -f $(TOP).ngr $(TOP).msd $(TOP).msk $(TOP).rbt $(TOP).twr $(TOP).xpi $(TOP)_pad.csv $(TOP)_pad.txt $(TOP).bld
        @rm -f $(TOP).ngc $(TOP).ncd $(TOP).ngd $(TOP).rba $(TOP).rbd $(TOP).rbb netlist.lst $(TOP).mrp $(TOP).ll $(TOP).bit
        @rm -f $(TOP).lso $(TOP).ngm $(TOP).ngr $(TOP).pad $(TOP).par $(TOP).pcf transcript vsim.wlf $(TOP).log $(TOP).bgn *.twr *.xml *.map *.unroutes
        @rm -f $(SCRIPTFILE)
        @rm -f $(LOGFILE)
        @rm -f $(PROJECTFILE)

files:
        @echo
        @echo $(TOP)".ngc       : netlist output from XST"
        @echo $(TOP)".ngr       : netlist output from XST for RTL and Technology viewers"
        @echo $(TOP)".scr       : script file for XST, generated by Makefile"
        @echo $(TOP)".prj       : contains the vhdl source files, generated by Makefile."
        @echo $(TOP)".log       : log file, output from XST"
        @echo $(TOP)".ucf       : user constraints file with pins description, write yourself"
        @echo $(TOP)".ut        : config. script for BITGEN, write yourself"
        @echo "it               : do-script for Modelsim in batchmode, write yourself"
        @echo $(TOP)".do        : do-script for Modelsim in GUI-mode, write yourself"
        @echo $(TOP)".par       : PAR report file, generated by make implement"
        @echo

vsim-help:
        @echo
        @echo " mkdir modelsim                                          : create main directoriy for simulation"
        @echo " vlib modelsim/work                                      : create work library for simulation"
        @echo " vmap                                                    : prints all logical mapped librarys"
        @echo " vmap -del work                                          : delete actual mapping for work library"
        @echo " vmap work modelsim/work                         : map logical library work to modelsim/work"
        @echo " vcom -93 -check_synthesis  -work work <vhdl_files>      : compile source vhdl files"
        @echo " vcom -93 -work work <tb_vhdl_files>                     : compile top level testbench"  
        @echo " do it           : use in batch mode to recompile the testbench and the top entity and to restart the simulation"
        @echo   

warnings-xst:
        @grep -n -i warning *.log
        @grep -n -i info *.log
        
warnings-implement:
        @grep -n -i warning *.par *.twr
        @grep -n -i info *.par *.twr

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.