URL
https://opencores.org/ocsvn/mb-jpeg/mb-jpeg/trunk
Subversion Repositories mb-jpeg
[/] [mb-jpeg/] [tags/] [STEP2_1b/] [system.log] - Rev 66
Compare with Previous | Blame | View Log
Saved contents of this file to system_log.71 during revup to EDK 8.1.Xilinx Platform Studio (XPS)Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.At Local date and time: Fri Jun 23 17:59:37 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make clean; exit;" started...rm -f implementation/system.ngcrm -f implementation/system.bmmrm -f implementation/system.bitrm -f implementation/system.ncdrm -f implementation/system_bd.bmmrm -rf implementation synthesis xst hdlrm -rf xst.srp system.srprm -rf microblaze_0/lib/rm -f decoder/executable.elfrm -rf simulation/behavioralrm -rf virtualplatformrm -f _impact.cmdDone!Xilinx Platform Studio (XPS)Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.At Local date and time: Sat Jun 24 16:54:34 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mssOutput Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 3 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 208 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 3lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 214 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (data_bram_1) - D:\mb-jpeg\system.mhs line 230 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...INFO:MDT - List of peripherals addressable from processor instance microblaze_0:- dlmbWARNING:MDT - D:\mb-jpeg\system.mhs line 89 - No Driver Found for instance dlmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance dlmb- dlmb_cntlr- data_bram_if_cntlr_0- data_bram_if_cntlr_1- ilmbWARNING:MDT - D:\mb-jpeg\system.mhs line 81 - No Driver Found for instance ilmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance ilmb- ilmb_cntlr- mb_opb- debug_module- RS232_Uart_1- SysACE_CompactFlash- LEDs_4Bit- DIPSWs_4Bit- PushButtons_5BitBuilding Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver opbarb_v1_02_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\opbarb_v1_02_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver gpio_v2_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\gpio_v2_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Copying files for library xilfatfs_v1_00_a fromC:\EDK\sw\lib\sw_services\xilfatfs_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\xilfatfs_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ...Running generate for OS'es, Drivers and Libraries ...Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ...Running make for Drivers and Libraries ...Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Compiling commonCompiling ipifCompiling microblaze_disable_dcache.sCompiling microblaze_disable_exceptions.sCompiling microblaze_disable_icache.sCompiling microblaze_disable_interrupts.sCompiling microblaze_enable_dcache.sCompiling microblaze_enable_exceptions.sCompiling microblaze_enable_icache.sCompiling microblaze_enable_interrupts.sCompiling microblaze_init_dcache_range.sCompiling microblaze_init_icache_range.sCompiling microblaze_update_dcache.sCompiling microblaze_update_icache.sCompiling _exit.cCompiling errno.cCompiling fcntl.cCompiling inbyte.cCompiling microblaze_exception_handler.cCompiling microblaze_exceptions_g.cCompiling microblaze_interrupt_handler.cCompiling microblaze_interrupts_g.cCompiling outbyte.cCompiling hw_exception_handler.SCompiling src/xilfatfs_alloc.cCompiling src/xilfatfs_close.cCompiling src/xilfatfs_directory.cCompiling src/xilfatfs_fat.cCompiling src/xilfatfs_fat16.cCompiling src/xilfatfs_fat32.cCompiling src/xilfatfs_filespec.cCompiling src/xilfatfs_filestatus.cCompiling src/xilfatfs_open.cCompiling src/xilfatfs_part.cCompiling src/xilfatfs_read.cCompiling src/xilfatfs_wd.cCompiling src/xilfatfs_stats.cCompiling src/xilfatfs_bufcache.cCompiling src/xilfatfs_sysace.cmake cleanCompiling opbarbCompiling uartliteCompiling sysaceCompiling gpioCompiling cpuLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ...LibGen Done.mb-gcc -O2 decoder/JpegToBmp.c decoder/decoder.c -o decoder/executable.elf \-Wl,-defsym -Wl,_TEXT_START_ADDR=0x50 -mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \decoder/JpegToBmp.c: In function `decode':decoder/JpegToBmp.c:56: error: `file1' undeclared (first use in this function)decoder/JpegToBmp.c:56: error: (Each undeclared identifier is reported only oncedecoder/JpegToBmp.c:56: error: for each function it appears in.)decoder/JpegToBmp.c:243: error: `file2' undeclared (first use in this function)decoder/JpegToBmp.c:255: error: 'for' loop initial declaration used outside C99 modedecoder/JpegToBmp.c:256: error: 'for' loop initial declaration used outside C99 modedecoder/JpegToBmp.c:261: error: redefinition of 'j'decoder/JpegToBmp.c:256: error: previous definition of 'j' was heredecoder/JpegToBmp.c:261: error: 'for' loop initial declaration used outside C99 modedecoder/decoder.c:2:21: mb-jpeg.h: No such file or directorydecoder/decoder.c: In function `main':decoder/decoder.c:8: error: `SYSACE_FILE' undeclared (first use in this function)decoder/decoder.c:8: error: (Each undeclared identifier is reported only oncedecoder/decoder.c:8: error: for each function it appears in.)decoder/decoder.c:8: error: `jpgfile' undeclared (first use in this function)decoder/decoder.c:13: error: `JPG_MAXSIZE' undeclared (first use in this function)make: *** [decoder/executable.elf] Error 1Done!At Local date and time: Sat Jun 24 16:56:11 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 decoder/JpegToBmp.c decoder/decoder.c -o decoder/executable.elf \-Wl,-defsym -Wl,_TEXT_START_ADDR=0x50 -mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \decoder/JpegToBmp.c: In function `decode':decoder/JpegToBmp.c:56: error: `file1' undeclared (first use in this function)decoder/JpegToBmp.c:56: error: (Each undeclared identifier is reported only oncedecoder/JpegToBmp.c:56: error: for each function it appears in.)decoder/JpegToBmp.c:243: error: `file2' undeclared (first use in this function)decoder/JpegToBmp.c:255: error: 'for' loop initial declaration used outside C99 modedecoder/JpegToBmp.c:256: error: 'for' loop initial declaration used outside C99 modedecoder/JpegToBmp.c:261: error: redefinition of 'j'decoder/JpegToBmp.c:256: error: previous definition of 'j' was heredecoder/JpegToBmp.c:261: error: 'for' loop initial declaration used outside C99 modemake: *** [decoder/executable.elf] Error 1Done!At Local date and time: Sat Jun 24 16:56:34 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 decoder/JpegToBmp.c decoder/decoder.c -o decoder/executable.elf \-Wl,-defsym -Wl,_TEXT_START_ADDR=0x50 -mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \decoder/JpegToBmp.c: In function `decode':decoder/JpegToBmp.c:56: error: `file1' undeclared (first use in this function)decoder/JpegToBmp.c:56: error: (Each undeclared identifier is reported only oncedecoder/JpegToBmp.c:56: error: for each function it appears in.)decoder/JpegToBmp.c:243: error: `file2' undeclared (first use in this function)decoder/JpegToBmp.c:255: error: 'for' loop initial declaration used outside C99 modedecoder/JpegToBmp.c:256: error: 'for' loop initial declaration used outside C99 modedecoder/JpegToBmp.c:261: error: redefinition of 'j'decoder/JpegToBmp.c:256: error: previous definition of 'j' was heredecoder/JpegToBmp.c:261: error: 'for' loop initial declaration used outside C99 modemake: *** [decoder/executable.elf] Error 1Done!At Local date and time: Sat Jun 24 17:03:24 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 decoder/JpegToBmp.c decoder/decoder.c -o decoder/executable.elf \-Wl,-defsym -Wl,_TEXT_START_ADDR=0x50 -mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \decoder/JpegToBmp.c: In function `decode':decoder/JpegToBmp.c:56: error: `file1' undeclared (first use in this function)decoder/JpegToBmp.c:56: error: (Each undeclared identifier is reported only oncedecoder/JpegToBmp.c:56: error: for each function it appears in.)decoder/JpegToBmp.c:243: error: `file2' undeclared (first use in this function)decoder/JpegToBmp.c:255: error: 'for' loop initial declaration used outside C99 modedecoder/JpegToBmp.c:256: error: 'for' loop initial declaration used outside C99 modedecoder/JpegToBmp.c:261: error: redefinition of 'j'decoder/JpegToBmp.c:256: error: previous definition of 'j' was heredecoder/JpegToBmp.c:261: error: 'for' loop initial declaration used outside C99 modemake: *** [decoder/executable.elf] Error 1Done!At Local date and time: Sat Jun 24 17:03:43 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 decoder/decoder.c -o decoder/executable.elf \-Wl,-defsym -Wl,_TEXT_START_ADDR=0x50 -mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \/cygdrive/c/DOCUME~1/S041945/LOCALS~1/Temp/cc0qdFfE.o: In function `main':/cygdrive/d/mb-jpeg/decoder/decoder.c:23: undefined reference to `decode'/cygdrive/d/mb-jpeg/decoder/decoder.c:37: undefined reference to `sysace_fwrite'collect2: ld returned 1 exit statusmake: *** [decoder/executable.elf] Error 1Done!ERROR:MDT - D:\mb-jpeg\system.mss line 101 PARAMETER name is not specifiedAt Local date and time: Sat Jun 24 17:05:37 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make libs; exit;" started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mssOutput Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 3 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 208 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 3lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 214 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (data_bram_1) - D:\mb-jpeg\system.mhs line 230 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...INFO:MDT - List of peripherals addressable from processor instance microblaze_0:- dlmbWARNING:MDT - D:\mb-jpeg\system.mhs line 89 - No Driver Found for instance dlmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance dlmb- dlmb_cntlr- data_bram_if_cntlr_0- data_bram_if_cntlr_1- ilmbWARNING:MDT - D:\mb-jpeg\system.mhs line 81 - No Driver Found for instance ilmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance ilmb- ilmb_cntlr- mb_opb- debug_module- RS232_Uart_1- SysACE_CompactFlash- LEDs_4Bit- DIPSWs_4Bit- PushButtons_5BitBuilding Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver opbarb_v1_02_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\opbarb_v1_02_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver gpio_v2_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\gpio_v2_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Copying files for library xilfatfs_v1_00_a fromC:\EDK\sw\lib\sw_services\xilfatfs_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\xilfatfs_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ...Running generate for OS'es, Drivers and Libraries ...Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ...Running make for Drivers and Libraries ...Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Compiling commonCompiling ipifCompiling microblaze_disable_dcache.sCompiling microblaze_disable_exceptions.sCompiling microblaze_disable_icache.sCompiling microblaze_disable_interrupts.sCompiling microblaze_enable_dcache.sCompiling microblaze_enable_exceptions.sCompiling microblaze_enable_icache.sCompiling microblaze_enable_interrupts.sCompiling microblaze_init_dcache_range.sCompiling microblaze_init_icache_range.sCompiling microblaze_update_dcache.sCompiling microblaze_update_icache.sCompiling _exit.cCompiling errno.cCompiling fcntl.cCompiling inbyte.cCompiling microblaze_exception_handler.cCompiling microblaze_exceptions_g.cCompiling microblaze_interrupt_handler.cCompiling microblaze_interrupts_g.cCompiling outbyte.cCompiling hw_exception_handler.SCompiling src/xilfatfs_alloc.cCompiling src/xilfatfs_close.cCompiling src/xilfatfs_directory.cCompiling src/xilfatfs_fat.cCompiling src/xilfatfs_fat16.cCompiling src/xilfatfs_fat32.cCompiling src/xilfatfs_filespec.cCompiling src/xilfatfs_filestatus.cCompiling src/xilfatfs_open.cCompiling src/xilfatfs_part.cCompiling src/xilfatfs_read.cCompiling src/xilfatfs_wd.cCompiling src/xilfatfs_stats.cCompiling src/xilfatfs_bufcache.cCompiling src/xilfatfs_write.cCompiling src/xilfatfs_sysace.cmake cleanCompiling opbarbCompiling uartliteCompiling sysaceCompiling gpioCompiling cpuLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ...LibGen Done.Done!At Local date and time: Sat Jun 24 17:06:13 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 decoder/decoder.c -o decoder/executable.elf \-Wl,-defsym -Wl,_TEXT_START_ADDR=0x50 -mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \/cygdrive/c/DOCUME~1/S041945/LOCALS~1/Temp/ccSGoXVX.o: In function `main':/cygdrive/d/mb-jpeg/decoder/decoder.c:23: undefined reference to `decode'collect2: ld returned 1 exit statusmake: *** [decoder/executable.elf] Error 1Done!Xilinx Platform Studio (XPS)Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.At Local date and time: Sat Jun 24 17:38:27 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 decoder/decoder.c -o decoder/executable.elf \-Wl,-defsym -Wl,_TEXT_START_ADDR=0x50 -mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \-D__MICROBLAZE -D__XUPV2P/cygdrive/c/DOCUME~1/S041945/LOCALS~1/Temp/ccmi13bU.o: In function `main':/cygdrive/d/mb-jpeg/decoder/decoder.c:31: undefined reference to `decode'collect2: ld returned 1 exit statusmake: *** [decoder/executable.elf] Error 1Done!Xilinx Platform Studio (XPS)Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.At Local date and time: Sat Jun 24 21:20:11 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make clean; exit;" started...rm -f implementation/system.ngcrm -f implementation/system.bmmrm -f implementation/system.bitrm -f implementation/system.ncdrm -f implementation/system_bd.bmmrm -rf implementation synthesis xst hdlrm -rf xst.srp system.srprm -rf microblaze_0/lib/rm -f decoder/executable.elfrm -rf simulation/behavioralrm -rf virtualplatformrm -f _impact.cmdDone!At Local date and time: Sat Jun 24 21:21:11 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make init_bram; exit;" started...****************************************************Creating system netlist for hardware specification..****************************************************platgen -p xc2vp30ff896-7 -lang vhdl -lp D:/XilinxXUP/lib/ -st xst system.mhsRelease Xilinx EDK 8.1 - platgen EDK_I.18.7Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Command Line: platgen -p xc2vp30ff896-7 -lang vhdl -lp D:/XilinxXUP/lib/ -st xstsystem.mhsParse system.mhs ...Read MPD definitions ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 3 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 208 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 3lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 214 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (data_bram_1) - D:\mb-jpeg\system.mhs line 230 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...Running UPDATE Tcl procedures for OPTION PLATGEN_SYSLEVEL_UPDATE_PROC...Modify defaults ...Processing licensed instances ...Completion time: 0.00 secondsCreating hardware output directories ...Managing hardware (BBD-specified) netlist files ...Managing cache ...Elaborating instances ...bram_block (lmb_bram) - D:\mb-jpeg\system.mhs:115 - elaborating IPbram_block (data_bram_0) - D:\mb-jpeg\system.mhs:211 - elaborating IPbram_block (data_bram_1) - D:\mb-jpeg\system.mhs:227 - elaborating IPWriting HDL for elaborated instances ...Inserting wrapper level ...Completion time: 3.00 secondsConstructing platform-level signal connectivity ...Completion time: 3.00 secondsWriting (top-level) BMM ...Writing BMM - D:\mb-jpeg\implementation\system.bmmWriting (top-level and wrappers) HDL ...Generating synthesis project file ...Running XST synthesis ...INFO:MDT - The following instances are synthesized with XST. The MPD optionIMP_NETLIST=TRUE indicates that a NGC file is to be produced using XSTsynthesis. IMP_NETLIST=FALSE (default) instances are not synthesized.microblaze_0_wrapper (microblaze_0) - D:\mb-jpeg\system.mhs:35 - Running XSTsynthesismb_opb_wrapper (mb_opb) - D:\mb-jpeg\system.mhs:55 - Running XST synthesisdebug_module_wrapper (debug_module) - D:\mb-jpeg\system.mhs:63 - Running XSTsynthesisTrying to terminate Process...Done!Xilinx Platform Studio (XPS)Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.At Local date and time: Thu Jul 06 21:44:34 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mssOutput Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 3 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 208 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 3lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 214 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (data_bram_1) - D:\mb-jpeg\system.mhs line 230 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...INFO:MDT - List of peripherals addressable from processor instance microblaze_0:- dlmbWARNING:MDT - D:\mb-jpeg\system.mhs line 89 - No Driver Found for instance dlmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance dlmb- dlmb_cntlr- data_bram_if_cntlr_0- data_bram_if_cntlr_1- ilmbWARNING:MDT - D:\mb-jpeg\system.mhs line 81 - No Driver Found for instance ilmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance ilmb- ilmb_cntlr- mb_opb- debug_module- RS232_Uart_1- SysACE_CompactFlash- LEDs_4Bit- DIPSWs_4Bit- PushButtons_5BitBuilding Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver opbarb_v1_02_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\opbarb_v1_02_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver gpio_v2_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\gpio_v2_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Copying files for library xilfatfs_v1_00_a fromC:\EDK\sw\lib\sw_services\xilfatfs_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\xilfatfs_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ...Running generate for OS'es, Drivers and Libraries ...Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ...Running make for Drivers and Libraries ...Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Compiling commonCompiling ipifCompiling microblaze_disable_dcache.sCompiling microblaze_disable_exceptions.sCompiling microblaze_disable_icache.sCompiling microblaze_disable_interrupts.sCompiling microblaze_enable_dcache.sCompiling microblaze_enable_exceptions.sCompiling microblaze_enable_icache.sCompiling microblaze_enable_interrupts.sCompiling microblaze_init_dcache_range.sCompiling microblaze_init_icache_range.sCompiling microblaze_update_dcache.sCompiling microblaze_update_icache.sCompiling _exit.cCompiling errno.cCompiling fcntl.cCompiling inbyte.cCompiling microblaze_exception_handler.cCompiling microblaze_exceptions_g.cCompiling microblaze_interrupt_handler.cCompiling microblaze_interrupts_g.cCompiling outbyte.cCompiling hw_exception_handler.SCompiling src/xilfatfs_alloc.cCompiling src/xilfatfs_close.cCompiling src/xilfatfs_directory.cCompiling src/xilfatfs_fat.cCompiling src/xilfatfs_fat16.cCompiling src/xilfatfs_fat32.cCompiling src/xilfatfs_filespec.cCompiling src/xilfatfs_filestatus.cCompiling src/xilfatfs_open.cCompiling src/xilfatfs_part.cCompiling src/xilfatfs_read.cCompiling src/xilfatfs_wd.cCompiling src/xilfatfs_stats.cCompiling src/xilfatfs_bufcache.cCompiling src/xilfatfs_write.cCompiling src/xilfatfs_sysace.cmake cleanCompiling opbarbCompiling uartliteCompiling sysaceCompiling gpioCompiling cpuLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ...LibGen Done.mb-gcc -O2 decoder/decoder.c -o decoder/executable.elf \-Wl,-defsym -Wl,_TEXT_START_ADDR=0x50 -mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \-D__MICROBLAZE -D__XUPV2P/cygdrive/c/DOCUME~1/S041945/LOCALS~1/Temp/ccsmDQpU.o: In function `main':/cygdrive/d/mb-jpeg/decoder/decoder.c:11: undefined reference to `bmpsize'/cygdrive/d/mb-jpeg/decoder/decoder.c:28: undefined reference to `decode'/cygdrive/d/mb-jpeg/decoder/decoder.c:37: undefined reference to `bmpsize'/cygdrive/d/mb-jpeg/decoder/decoder.c:40: undefined reference to `bmpsize'collect2: ld returned 1 exit statusmake: *** [decoder/executable.elf] Error 1Done!At Local date and time: Thu Jul 06 21:45:56 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 decoder/decoder.c -o decoder/executable.elf \-Wl,-defsym -Wl,_TEXT_START_ADDR=0x50 -mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \-D__MICROBLAZE -D__XUPV2P/cygdrive/c/DOCUME~1/S041945/LOCALS~1/Temp/ccgwGBpl.o: In function `main':/cygdrive/d/mb-jpeg/decoder/decoder.c:11: undefined reference to `bmpsize'/cygdrive/d/mb-jpeg/decoder/decoder.c:28: undefined reference to `decode'/cygdrive/d/mb-jpeg/decoder/decoder.c:37: undefined reference to `bmpsize'/cygdrive/d/mb-jpeg/decoder/decoder.c:40: undefined reference to `bmpsize'collect2: ld returned 1 exit statusmake: *** [decoder/executable.elf] Error 1Done!At Local date and time: Thu Jul 06 21:46:15 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 testbench1/tb1.c -o Testbench1/executable.elf \-mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \mb-size Testbench1/executable.elftext data bss dec hex filename21580 144 13832 35556 8ae4 Testbench1/executable.elfDone!At Local date and time: Thu Jul 06 21:46:54 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make init_bram; exit;" started...****************************************************Creating system netlist for hardware specification..****************************************************platgen -p xc2vp30ff896-7 -lang vhdl -lp D:/XilinxXUP/lib/ -st xst system.mhsRelease Xilinx EDK 8.1 - platgen EDK_I.18.7Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Command Line: platgen -p xc2vp30ff896-7 -lang vhdl -lp D:/XilinxXUP/lib/ -st xstsystem.mhsParse system.mhs ...Read MPD definitions ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 3 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 208 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 3lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 214 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (data_bram_1) - D:\mb-jpeg\system.mhs line 230 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...Running UPDATE Tcl procedures for OPTION PLATGEN_SYSLEVEL_UPDATE_PROC...Modify defaults ...Processing licensed instances ...Completion time: 0.00 secondsCreating hardware output directories ...Managing hardware (BBD-specified) netlist files ...Managing cache ...Elaborating instances ...bram_block (lmb_bram) - D:\mb-jpeg\system.mhs:115 - elaborating IPbram_block (data_bram_0) - D:\mb-jpeg\system.mhs:211 - elaborating IPbram_block (data_bram_1) - D:\mb-jpeg\system.mhs:227 - elaborating IPWriting HDL for elaborated instances ...Inserting wrapper level ...Completion time: 3.00 secondsConstructing platform-level signal connectivity ...Completion time: 3.00 secondsWriting (top-level) BMM ...Writing BMM - D:\mb-jpeg\implementation\system.bmmWriting (top-level and wrappers) HDL ...Generating synthesis project file ...Running XST synthesis ...INFO:MDT - The following instances are synthesized with XST. The MPD optionIMP_NETLIST=TRUE indicates that a NGC file is to be produced using XSTsynthesis. IMP_NETLIST=FALSE (default) instances are not synthesized.microblaze_0_wrapper (microblaze_0) - D:\mb-jpeg\system.mhs:35 - Running XSTsynthesismb_opb_wrapper (mb_opb) - D:\mb-jpeg\system.mhs:55 - Running XST synthesisdebug_module_wrapper (debug_module) - D:\mb-jpeg\system.mhs:63 - Running XSTsynthesisilmb_wrapper (ilmb) - D:\mb-jpeg\system.mhs:81 - Running XST synthesisdlmb_wrapper (dlmb) - D:\mb-jpeg\system.mhs:89 - Running XST synthesisdlmb_cntlr_wrapper (dlmb_cntlr) - D:\mb-jpeg\system.mhs:97 - Running XSTsynthesisilmb_cntlr_wrapper (ilmb_cntlr) - D:\mb-jpeg\system.mhs:106 - Running XSTsynthesislmb_bram_wrapper (lmb_bram) - D:\mb-jpeg\system.mhs:115 - Running XST synthesisrs232_uart_1_wrapper (rs232_uart_1) - D:\mb-jpeg\system.mhs:122 - Running XSTsynthesissysace_compactflash_wrapper (sysace_compactflash) - D:\mb-jpeg\system.mhs:138 -Running XST synthesisleds_4bit_wrapper (leds_4bit) - D:\mb-jpeg\system.mhs:155 - Running XSTsynthesisdipsws_4bit_wrapper (dipsws_4bit) - D:\mb-jpeg\system.mhs:169 - Running XSTsynthesispushbuttons_5bit_wrapper (pushbuttons_5bit) - D:\mb-jpeg\system.mhs:183 -Running XST synthesisdcm_0_wrapper (dcm_0) - D:\mb-jpeg\system.mhs:197 - Running XST synthesisdata_bram_0_wrapper (data_bram_0) - D:\mb-jpeg\system.mhs:211 - Running XSTsynthesisdata_bram_if_cntlr_0_wrapper (data_bram_if_cntlr_0) - D:\mb-jpeg\system.mhs:218- Running XST synthesisdata_bram_1_wrapper (data_bram_1) - D:\mb-jpeg\system.mhs:227 - Running XSTsynthesisdata_bram_if_cntlr_1_wrapper (data_bram_if_cntlr_1) - D:\mb-jpeg\system.mhs:234- Running XST synthesisRunning NGCBUILD ...Rebuilding cache ...Total run time: 368.00 secondsRunning synthesis...bash -c "cd synthesis; ./synthesis.sh"WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 47days, this program will not operate. For more information about this product,please refer to the Evaluation Agreement, which was shipped to you along withthe Evaluation CDs.To purchase an annual license for this software, please contact your localField Applications Engineer (FAE) or salesperson. If you have any questions,or if we can assist in any way, please send an email to: eval@xilinx.comThank You!Release 8.1i - xst I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.-->TABLE OF CONTENTS1) Synthesis Options Summary2) HDL Compilation3) HDL Analysis4) HDL Synthesis4.1) HDL Synthesis Report5) Advanced HDL Synthesis5.1) Advanced HDL Synthesis Report6) Low Level Synthesis7) Final Report7.1) Device utilization summary7.2) TIMING REPORT=========================================================================* Synthesis Options Summary *=========================================================================---- Source ParametersInput Format : MIXEDInput File Name : "system_xst.prj"---- Target ParametersTarget Device : xc2vp30ff896-7Output File Name : "../implementation/system.ngc"---- Source OptionsTop Module Name : system---- Target OptionsAdd IO Buffers : NO---- General OptionsOptimization Goal : speedHierarchy Separator : /=========================================================================WARNING:Xst:29 - Optimization Effort not specifiedThe following parameters have been added:Optimization Effort : 1==================================================================================================================================================* HDL Compilation *=========================================================================Compiling vhdl file "D:/mb-jpeg/hdl/system.vhd" in Library work.Entity <system> compiled.Entity <system> (Architecture <STRUCTURE>) compiled.=========================================================================* HDL Analysis *=========================================================================Analyzing Entity <system> (Architecture <STRUCTURE>).WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1608: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1614: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1620: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1626: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1632: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1638: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1644: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1650: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1656: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1662: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1668: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1676: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1684: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1692: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1700: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1708: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1716: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1724: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1732: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1740: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1748: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1756: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1764: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1772: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1780: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1788: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1796: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1802: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1808: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1814: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1820: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1828: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1836: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1844: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1852: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1860: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1868: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1876: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1884: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1892: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1900: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1908: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1916: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1924: Generating a Black Box for component <IBUFG>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1930: Generating a Black Box for component <IBUF>.Entity <system> analyzed. Unit <system> generated.=========================================================================* HDL Synthesis *=========================================================================Synthesizing Unit <system>.Related source file is "D:/mb-jpeg/hdl/system.vhd".Unit <system> synthesized.=========================================================================HDL Synthesis ReportFound no macro==================================================================================================================================================* Advanced HDL Synthesis *==================================================================================================================================================Advanced HDL Synthesis ReportFound no macro==================================================================================================================================================* Low Level Synthesis *=========================================================================Loading device for application Rf_Device from file '2vp30.nph' in environment c:\ISE.Optimizing unit <system> ...Mapping all equations...Building and optimizing final netlist ...=========================================================================* Final Report *=========================================================================Final ResultsTop Level Output File Name : ../implementation/system.ngcOutput Format : ngcOptimization Goal : speedKeep Hierarchy : noDesign Statistics# IOs : 45Cell Usage :# BELS : 2# GND : 1# VCC : 1# IO Buffers : 45# IBUF : 4# IBUFG : 1# IOBUF : 29# OBUF : 11# Others : 18# data_bram_0_wrapper : 1# data_bram_1_wrapper : 1# data_bram_if_cntlr_0_wrapper: 1# data_bram_if_cntlr_1_wrapper: 1# dcm_0_wrapper : 1# debug_module_wrapper : 1# dipsws_4bit_wrapper : 1# dlmb_cntlr_wrapper : 1# dlmb_wrapper : 1# ilmb_cntlr_wrapper : 1# ilmb_wrapper : 1# leds_4bit_wrapper : 1# lmb_bram_wrapper : 1# mb_opb_wrapper : 1# microblaze_0_wrapper : 1# pushbuttons_5bit_wrapper : 1# rs232_uart_1_wrapper : 1# sysace_compactflash_wrapper : 1=========================================================================Device utilization summary:---------------------------Selected Device : 2vp30ff896-7Number of bonded IOBs: 45 out of 556 8%=========================================================================TIMING REPORTNOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE.FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORTGENERATED AFTER PLACE-and-ROUTE.Clock Information:------------------No clock signals found in this designTiming Summary:---------------Speed Grade: -7Minimum period: No path foundMinimum input arrival time before clock: No path foundMaximum output required time after clock: No path foundMaximum combinational path delay: 2.924nsTiming Detail:--------------All values displayed in nanoseconds (ns)=========================================================================Timing constraint: Default path analysisTotal number of paths / destination ports: 2006 / 1977-------------------------------------------------------------------------Delay: 2.924ns (Levels of Logic = 1)Source: sysace_compactflash:SysACE_MPD_O<3> (PAD)Destination: fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3> (PAD)Data Path: sysace_compactflash:SysACE_MPD_O<3> to fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3>Gate NetCell:in->out fanout Delay Delay Logical Name (Net Name)---------------------------------------- ------------sysace_compactflash_wrapper:SysACE_MPD_O<3> 1 0.000 0.332 sysace_compactflash (fpga_0_SysACE_CompactFlash_SysACE_MPD_O<3>)IOBUF:I->IO 2.592 iobuf_22 (fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3>)----------------------------------------Total 2.924ns (2.592ns logic, 0.332ns route)(88.7% logic, 11.3% route)=========================================================================CPU : 10.25 / 10.31 s | Elapsed : 11.00 / 11.00 s-->Total memory usage is 169492 kilobytesNumber of errors : 0 ( 0 filtered)Number of warnings : 47 ( 0 filtered)Number of infos : 0 ( 0 filtered)*********************************************Running Xilinx Implementation tools..*********************************************xflow -wd implementation -p xc2vp30ff896-7 -implement xflow.opt system.ngcRelease 8.1i - Xflow I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.xflow.exe -wd implementation -p xc2vp30ff896-7 -implement xflow.opt system.ngc.... Copying flowfile c:/ISE/xilinx/data/fpga.flw into working directoryD:/mb-jpeg/implementationUsing Flow File: D:/mb-jpeg/implementation/fpga.flwUsing Option File(s):D:/mb-jpeg/implementation/xflow.optCreating Script File ...#----------------------------------------------## Starting program ngdbuild# ngdbuild -p xc2vp30ff896-7 -nt timestamp -bm system.bmmD:/mb-jpeg/implementation/system.ngc -uc system.ucf system.ngd#----------------------------------------------#Release 8.1i - ngdbuild I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -p xc2vp30ff896-7 -nt timestamp -bm system.bmm -ucsystem.ucf D:/mb-jpeg/implementation/system.ngc system.ngdReading NGO file 'D:/mb-jpeg/implementation/system.ngc' ...Loading design module "D:/mb-jpeg/implementation/microblaze_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/mb_opb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/debug_module_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/ilmb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dlmb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dlmb_cntlr_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/ilmb_cntlr_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/lmb_bram_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/rs232_uart_1_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/sysace_compactflash_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/leds_4bit_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dipsws_4bit_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/pushbuttons_5bit_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dcm_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/data_bram_0_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/data_bram_if_cntlr_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/data_bram_1_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/data_bram_if_cntlr_1_wrapper.ngc"...Applying constraints in "system.ucf" to the design...Checking timing specifications ...INFO:XdmHelpers:851 - TNM "sys_clk_pin", used in period specification"TS_sys_clk_pin", was traced into DCM instance "dcm_0/dcm_0/DCM_INST". Thefollowing new TNM groups and period specifications were generated at the DCMoutput(s):CLK0: TS_dcm_0_dcm_0_CLK0_BUF=PERIOD dcm_0_dcm_0_CLK0_BUFTS_sys_clk_pin*1.000000 HIGH 50.000000%Processing BMM file ...Checking expanded design ...WARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/word_r1_r2_unalignment' has no driverWARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/word_r1_imm_unalignment' has no driverWARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/halfword_unalignment' has no driverWARNING:NgdBuild:478 - clock net debug_module/bscan_drck1 with clock driverdebug_module/debug_module/BUFG_DRCK1 drives no clock pinsNGDBUILD Design Results Summary:Number of errors: 0Number of warnings: 4Writing NGD file "system.ngd" ...Writing NGDBUILD log file "system.bld"...NGDBUILD done.#----------------------------------------------## Starting program map# map -o system_map.ncd -pr b system.ngd system.pcf#----------------------------------------------#Release 8.1i - Map I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Using target part "2vp30ff896-7".Mapping design into LUTs...Writing file system_map.ngm...Running directed packing...Running delay-based LUT packing...Running related packing...Writing design file "system_map.ncd"...Design Summary:Number of errors: 0Number of warnings: 6Logic Utilization:Number of Slice Flip Flops: 1,183 out of 27,392 4%Number of 4 input LUTs: 1,489 out of 27,392 5%Logic Distribution:Number of occupied Slices: 1,308 out of 13,696 9%Number of Slices containing only related logic: 1,308 out of 1,308 100%Number of Slices containing unrelated logic: 0 out of 1,308 0%*See NOTES below for an explanation of the effects of unrelated logicTotal Number 4 input LUTs: 1,914 out of 27,392 6%Number used as logic: 1,489Number used as a route-thru: 7Number used for Dual Port RAMs: 256(Two LUTs used per Dual Port RAM)Number used as Shift registers: 162Number of bonded IOBs: 44 out of 556 7%IOB Flip Flops: 73Number of PPC405s: 0 out of 2 0%Number of Block RAMs: 96 out of 136 70%Number of MULT18X18s: 3 out of 136 2%Number of GCLKs: 2 out of 16 12%Number of DCMs: 1 out of 8 12%Number of BSCANs: 1 out of 1 100%Number of GTs: 0 out of 8 0%Number of GT10s: 0 out of 0 0%Number of RPM macros: 5Total equivalent gate count for design: 6,374,519Additional JTAG gate count for IOBs: 2,112Peak Memory Usage: 225 MBNOTES:Related logic is defined as being logic that shares connectivity - e.g. twoLUTs are "related" if they share common inputs. When assembling slices,Map gives priority to combine logic that is related. Doing so results inthe best timing performance.Unrelated logic shares no connectivity. Map will only begin packingunrelated logic into a slice once 99% of the slices are occupied throughrelated logic packing.Note that once logic distribution reaches the 99% level through relatedlogic packing, this does not mean the device is completely utilized.Unrelated logic packing will then begin, continuing until all usable LUTsand FFs are occupied. Depending on your timing budget, increased levels ofunrelated logic packing may adversely affect the overall timing performanceof your design.Mapping completed.See MAP report file "system_map.mrp" for details.#----------------------------------------------## Starting program par# par -w -ol high system_map.ncd system.ncd system.pcf#----------------------------------------------#Release 8.1i - par I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Constraints file: system.pcf.WARNING:Par:331 - You are using an evaluation version of Xilinx Software. In 47 days, this program will not operate. Formore information about this product, please refer to the Evaluation Agreement, which was shipped to you along withthe Evaluation CDs.To purchase an annual license for this software, please contact your local Field Applications Engineer (FAE) orsalesperson. If you have any questions, or if we can assist in any way, please send an email to: eval@xilinx.comThank You!Loading device for application Rf_Device from file '2vp30.nph' in environment c:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7Initializing temperature to 85.000 Celsius. (default - Range: -40.000 to 100.000 Celsius)Initializing voltage to 1.400 Volts. (default - Range: 1.400 to 1.600 Volts)Device speed data version: "PRODUCTION 1.92 2005-11-04".Device Utilization Summary:Number of BSCANs 1 out of 1 100%Number of BUFGMUXs 2 out of 16 12%Number of DCMs 1 out of 8 12%Number of External IOBs 44 out of 556 7%Number of LOCed IOBs 44 out of 44 100%Number of MULT18X18s 3 out of 136 2%Number of RAMB16s 96 out of 136 70%Number of SLICEs 1308 out of 13696 9%Overall effort level (-ol): HighPlacer effort level (-pl): HighPlacer cost table entry (-t): 1Router effort level (-rl): HighStarting initial Timing Analysis. REAL time: 8 secsFinished initial Timing Analysis. REAL time: 9 secsStarting PlacerPhase 1.1Phase 1.1 (Checksum:98d36f) REAL time: 12 secsPhase 2.31Phase 2.31 (Checksum:1312cfe) REAL time: 12 secsWARNING:Place:414 - The input design contains local clock signal(s). To get a better result, we recommend users run mapwith the "-timing" option set before starting the placement.Phase 3.2.Phase 3.2 (Checksum:1c9c37d) REAL time: 18 secsPhase 4.30Phase 4.30 (Checksum:26259fc) REAL time: 18 secsPhase 5.3Phase 5.3 (Checksum:2faf07b) REAL time: 18 secsPhase 6.5Phase 6.5 (Checksum:39386fa) REAL time: 18 secsPhase 7.8......................................................................................................................................................................Phase 7.8 (Checksum:12a9340) REAL time: 36 secsPhase 8.5Phase 8.5 (Checksum:4c4b3f8) REAL time: 37 secsPhase 9.18Phase 9.18 (Checksum:55d4a77) REAL time: 44 secsPhase 10.5Phase 10.5 (Checksum:5f5e0f6) REAL time: 44 secsPhase 11.27Phase 11.27 (Checksum:68e7775) REAL time: 45 secsPhase 12.24Phase 12.24 (Checksum:7270df4) REAL time: 45 secsWriting design to file system.ncdTotal REAL time to Placer completion: 48 secsTotal CPU time to Placer completion: 44 secsStarting RouterPhase 1: 14525 unrouted; REAL time: 1 minsPhase 2: 12823 unrouted; REAL time: 1 mins 1 secsPhase 3: 2660 unrouted; REAL time: 1 mins 7 secsPhase 4: 2660 unrouted; (96135) REAL time: 1 mins 8 secsPhase 5: 2709 unrouted; (0) REAL time: 1 mins 13 secsPhase 6: 2709 unrouted; (0) REAL time: 1 mins 14 secsPhase 7: 0 unrouted; (0) REAL time: 1 mins 26 secsPhase 8: 0 unrouted; (0) REAL time: 1 mins 29 secsTotal REAL time to Router completion: 1 mins 33 secsTotal CPU time to Router completion: 1 mins 28 secsGenerating "PAR" statistics.**************************Generating Clock Report**************************+---------------------+--------------+------+------+------------+-------------+| Clock Net | Resource |Locked|Fanout|Net Skew(ns)|Max Delay(ns)|+---------------------+--------------+------+------+------------+-------------+|data_bram_0_port_BRA | | | | | || M_Clk | BUFGMUX7S| No | 948 | 0.281 | 1.258 |+---------------------+--------------+------+------+------------+-------------+| DBG_CLK_s | BUFGMUX4P| No | 139 | 0.244 | 1.257 |+---------------------+--------------+------+------+------------+-------------+|fpga_0_SysACE_Compac | | | | | || tFlash_SysACE_CLK | Local| | 62 | 0.272 | 2.463 |+---------------------+--------------+------+------+------------+-------------+|debug_module/bscan_u | | | | | || pdate | Local| | 1 | 0.000 | 0.356 |+---------------------+--------------+------+------+------------+-------------+* Net Skew is the difference between the minimum and maximum routingonly delays for the net. Note this is different from Clock Skew whichis reported in TRCE timing report. Clock Skew is the difference betweenthe minimum and maximum path delays which includes logic delays.Timing Score: 0Number of Timing Constraints that were not applied: 1Asterisk (*) preceding a constraint indicates it was not met.This may be due to a setup or hold violation.------------------------------------------------------------------------------------------------------Constraint | Requested | Actual | Logic | Absolute |Number of| | | Levels | Slack |errors------------------------------------------------------------------------------------------------------TS_dcm_0_dcm_0_CLK0_BUF = PERIOD TIMEGRP | 10.000ns | 9.773ns | 2 | 0.227ns | 0"dcm_0_dcm_0_CLK0_BUF" TS_sys_clk_pin | | | | |HIGH 50% | | | | |------------------------------------------------------------------------------------------------------NET "fpga_0_SysACE_CompactFlash_SysACE_CL | 30.000ns | 3.969ns | 2 | 26.031ns | 0K" PERIOD = 30 ns HIGH 50% | | | | |------------------------------------------------------------------------------------------------------TS_sys_clk_pin = PERIOD TIMEGRP "sys_clk_ | N/A | N/A | N/A | N/A | N/Apin" 10 ns HIGH 50% | | | | |------------------------------------------------------------------------------------------------------All constraints were met.INFO:Timing:2761 - N/A entries in the Constraints list may indicate that theconstraint does not cover any paths or that it has no requested value.Generating Pad Report.All signals are completely routed.Total REAL time to PAR completion: 1 mins 39 secsTotal CPU time to PAR completion: 1 mins 32 secsPeak Memory Usage: 310 MBPlacement: Completed - No errors found.Routing: Completed - No errors found.Timing: Completed - No errors found.Number of error messages: 0Number of warning messages: 2Number of info messages: 0Writing design to file system.ncdPAR done!#----------------------------------------------## Starting program post_par_trce# trce -e 3 -xml system.twx system.ncd system.pcf#----------------------------------------------#Release 8.1i - Trace I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Loading device for application Rf_Device from file '2vp30.nph' in environmentc:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7--------------------------------------------------------------------------------Release 8.1i Trace I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.trce -e 3 -xml system.twx system.ncd system.pcfDesign file: system.ncdPhysical constraint file: system.pcfDevice,speed: xc2vp30,-7 (PRODUCTION 1.92 2005-11-04)Report level: error report--------------------------------------------------------------------------------INFO:Timing:2752 - To get complete path coverage, use the unconstrained pathsoption. All paths that are not constrained will be reported in theunconstrained paths section(s) of the report.Timing summary:---------------Timing errors: 0 Score: 0Constraints cover 479204 paths, 0 nets, and 12146 connectionsDesign statistics:Minimum period: 9.773ns (Maximum frequency: 102.323MHz)Analysis completed Thu Jul 06 21:55:53 2006--------------------------------------------------------------------------------Generating Report ...Number of warnings: 0Number of info messages: 1Total time: 11 secsxflow done!*********************************************Running Bitgen..*********************************************cd implementation; bitgen -w -f bitgen.ut systemRelease 8.1i - Bitgen I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Loading device for application Rf_Device from file '2vp30.nph' in environmentc:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7Opened constraints file system.pcf.Thu Jul 06 21:56:01 2006Running DRC.WARNING:PhysDesignRules:367 - The signal <lmb_bram/lmb_bram/BRAM_Clk_B> isincomplete. The signal does not drive any load pins in the design.DRC detected 0 errors and 1 warnings.Creating bit map...Saving bit stream in "system.bit".Creating bit mask...Saving mask bit stream in "system.msk".Bitstream generation is complete.*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Testbench1/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Testbench1/executable.elf...INFO:MDT - BRAM lmb_bram will be initialized with ELF of processor microblaze_0Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdTestbench1/executable.elf tag data_bram_0 data_bram_1 lmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.Done!At Local date and time: Thu Jul 06 21:57:25 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 2 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Thu Jul 06 22:03:12 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!Done.Done.At Local date and time: Thu Jul 06 22:10:06 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 testbench1/tb1.c -o Testbench1/executable.elf \-mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \mb-size Testbench1/executable.elftext data bss dec hex filename21596 144 13832 35572 8af4 Testbench1/executable.elfDone!At Local date and time: Thu Jul 06 22:10:28 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make init_bram; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Testbench1/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Testbench1/executable.elf...INFO:MDT - BRAM lmb_bram will be initialized with ELF of processor microblaze_0Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdTestbench1/executable.elf tag data_bram_0 data_bram_1 lmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.Done!At Local date and time: Thu Jul 06 22:10:34 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Thu Jul 06 22:10:53 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Thu Jul 06 22:11:47 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.Loopback test failed. Sent character = 00, Received character = 00.The hardware may be malfunctioning or the BIOS setting for the Parallel port isnot set to ECP mode.Cable connection failed.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.Cable connection established.ECP port test failed. Using download cable in compatibility mode.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 0.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 0.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...Xilinx Platform Studio (XPS)Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.At Local date and time: Thu Jul 06 22:18:32 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Thu Jul 06 22:21:50 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 testbench1/tb1.c -o Testbench1/executable.elf \-mno-xl-soft-mul -g -I./microblaze_0/include/ -Itestbench1/ -L./microblaze_0/lib/ \mb-size Testbench1/executable.elftext data bss dec hex filename21596 144 13832 35572 8af4 Testbench1/executable.elfDone!At Local date and time: Thu Jul 06 22:22:08 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Testbench1/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Testbench1/executable.elf...INFO:MDT - BRAM lmb_bram will be initialized with ELF of processor microblaze_0Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdTestbench1/executable.elf tag data_bram_0 data_bram_1 lmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!Done.Linker Script generated successfully.At Local date and time: Thu Jul 06 22:25:58 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 testbench1/tb1.c -o Testbench1/executable.elf \-mno-xl-soft-mul -Wl,-T -Wl,Testbench1_linker_script.ld -g -I./microblaze_0/include/ -Itestbench1/ -L./microblaze_0/lib/ \mb-size Testbench1/executable.elftext data bss dec hex filename20724 1016 21000 42740 a6f4 Testbench1/executable.elfDone!At Local date and time: Thu Jul 06 22:26:10 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Testbench1/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Testbench1/executable.elf...INFO:MDT - BRAM lmb_bram will be initialized with ELF of processor microblaze_0Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdTestbench1/executable.elf tag data_bram_0 data_bram_1 lmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!Done.At Local date and time: Thu Jul 06 22:30:10 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 testbench1/tb1.c -o Testbench1/executable.elf \-mno-xl-soft-mul -Wl,-T -Wl,Testbench1_linker_script.ld -g -I./microblaze_0/include/ -Itestbench1/ -L./microblaze_0/lib/ \mb-size Testbench1/executable.elftext data bss dec hex filename20720 1016 21004 42740 a6f4 Testbench1/executable.elfDone!At Local date and time: Thu Jul 06 22:30:14 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Testbench1/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Testbench1/executable.elf...INFO:MDT - BRAM lmb_bram will be initialized with ELF of processor microblaze_0Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdTestbench1/executable.elf tag data_bram_0 data_bram_1 lmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Thu Jul 06 22:33:04 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 testbench1/tb1.c -o Testbench1/executable.elf \-mno-xl-soft-mul -Wl,-T -Wl,Testbench1_linker_script.ld -g -I./microblaze_0/include/ -Itestbench1/ -L./microblaze_0/lib/ \mb-size Testbench1/executable.elftext data bss dec hex filename20728 1016 21004 42748 a6fc Testbench1/executable.elfDone!At Local date and time: Thu Jul 06 22:33:10 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Testbench1/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Testbench1/executable.elf...INFO:MDT - BRAM lmb_bram will be initialized with ELF of processor microblaze_0Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdTestbench1/executable.elf tag data_bram_0 data_bram_1 lmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Thu Jul 06 22:35:26 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Thu Jul 06 22:39:37 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Thu Jul 06 22:40:52 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make clean; exit;" started...rm -f implementation/system.ngcrm -f implementation/system.bmmrm -f implementation/system.bitrm -f implementation/system.ncdrm -f implementation/system_bd.bmmrm -rf implementation synthesis xst hdlrm -rf xst.srp system.srprm -rf microblaze_0/lib/rm -f Testbench1/executable.elfrm -rf simulation/behavioralrm -rf virtualplatformrm -f _impact.cmdDone!Xilinx Platform Studio (XPS)Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.At Local date and time: Sun Jul 16 23:45:17 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mssOutput Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 3 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 208 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 3lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 214 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (data_bram_1) - D:\mb-jpeg\system.mhs line 230 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...INFO:MDT - List of peripherals addressable from processor instance microblaze_0:- dlmbWARNING:MDT - D:\mb-jpeg\system.mhs line 89 - No Driver Found for instance dlmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance dlmb- dlmb_cntlr- data_bram_if_cntlr_0- data_bram_if_cntlr_1- ilmbWARNING:MDT - D:\mb-jpeg\system.mhs line 81 - No Driver Found for instance ilmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance ilmb- ilmb_cntlr- mb_opb- debug_module- RS232_Uart_1- SysACE_CompactFlash- LEDs_4Bit- DIPSWs_4Bit- PushButtons_5BitBuilding Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver opbarb_v1_02_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\opbarb_v1_02_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver gpio_v2_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\gpio_v2_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Copying files for library xilfatfs_v1_00_a fromC:\EDK\sw\lib\sw_services\xilfatfs_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\xilfatfs_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ...Running generate for OS'es, Drivers and Libraries ...Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ...Running make for Drivers and Libraries ...Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Compiling commonCompiling ipifCompiling microblaze_disable_dcache.sCompiling microblaze_disable_exceptions.sCompiling microblaze_disable_icache.sCompiling microblaze_disable_interrupts.sCompiling microblaze_enable_dcache.sCompiling microblaze_enable_exceptions.sCompiling microblaze_enable_icache.sCompiling microblaze_enable_interrupts.sCompiling microblaze_init_dcache_range.sCompiling microblaze_init_icache_range.sCompiling microblaze_update_dcache.sCompiling microblaze_update_icache.sCompiling _exit.cCompiling errno.cCompiling fcntl.cCompiling inbyte.cCompiling microblaze_exception_handler.cCompiling microblaze_exceptions_g.cCompiling microblaze_interrupt_handler.cCompiling microblaze_interrupts_g.cCompiling outbyte.cCompiling hw_exception_handler.SCompiling src/xilfatfs_alloc.cCompiling src/xilfatfs_close.cCompiling src/xilfatfs_directory.cCompiling src/xilfatfs_fat.cCompiling src/xilfatfs_fat16.cCompiling src/xilfatfs_fat32.cCompiling src/xilfatfs_filespec.cCompiling src/xilfatfs_filestatus.cCompiling src/xilfatfs_open.cCompiling src/xilfatfs_part.cCompiling src/xilfatfs_read.cCompiling src/xilfatfs_wd.cCompiling src/xilfatfs_stats.cCompiling src/xilfatfs_bufcache.cCompiling src/xilfatfs_write.cCompiling src/xilfatfs_sysace.cmake cleanCompiling opbarbCompiling uartliteCompiling sysaceCompiling gpioCompiling cpuLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ...LibGen Done.mb-gcc -O2 testbench1/tb1.c -o Testbench1/executable.elf \-mno-xl-soft-mul -g -I./microblaze_0/include/ -Itestbench1/ -L./microblaze_0/lib/ \mb-size Testbench1/executable.elftext data bss dec hex filename21600 144 13832 35576 8af8 Testbench1/executable.elfmb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/main.c:14:21: windows.h: No such file or directoryencoder/main.c: In function `main':encoder/main.c:45: error: `LARGE_INTEGER' undeclared (first use in this function)encoder/main.c:45: error: (Each undeclared identifier is reported only onceencoder/main.c:45: error: for each function it appears in.)encoder/main.c:45: error: parse error before "st"encoder/main.c:85: error: `st' undeclared (first use in this function)encoder/main.c:153: error: `en' undeclared (first use in this function)encoder/zzq.c:75:2: warning: no newline at end of filemake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Sun Jul 16 23:48:16 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/main.c: In function `main':encoder/main.c:155: error: request for member `QuadPart' in something not a structure or unionencoder/main.c:155: error: request for member `QuadPart' in something not a structure or unionencoder/zzq.c:75:2: warning: no newline at end of filemake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Sun Jul 16 23:49:31 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of file/cygdrive/c/DOCUME~1/S041945/LOCALS~1/Temp/cc6gx8gy.o: In function `main':/cygdrive/d/mb-jpeg/encoder/main.c:76: undefined reference to `QueryPerformanceCounter'/cygdrive/d/mb-jpeg/encoder/main.c:87: undefined reference to `QueryPerformanceCounter'collect2: ld returned 1 exit statusmake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Sun Jul 16 23:50:58 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename78160 4196 2776 85132 14c8c Encoder/executable.elfDone!At Local date and time: Sun Jul 16 23:52:45 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename78160 4196 2776 85132 14c8c Encoder/executable.elfDone!At Local date and time: Sun Jul 16 23:54:00 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename78160 4196 2776 85132 14c8c Encoder/executable.elfDone!At Local date and time: Sun Jul 16 23:55:19 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make init_bram; exit;" started...****************************************************Creating system netlist for hardware specification..****************************************************platgen -p xc2vp30ff896-7 -lang vhdl -lp D:/XilinxXUP/lib/ -st xst system.mhsRelease Xilinx EDK 8.1 - platgen EDK_I.18.7Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Command Line: platgen -p xc2vp30ff896-7 -lang vhdl -lp D:/XilinxXUP/lib/ -st xstsystem.mhsParse system.mhs ...Read MPD definitions ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 3 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 208 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 3lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 214 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (data_bram_1) - D:\mb-jpeg\system.mhs line 230 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...Running UPDATE Tcl procedures for OPTION PLATGEN_SYSLEVEL_UPDATE_PROC...Modify defaults ...Processing licensed instances ...Completion time: 0.00 secondsCreating hardware output directories ...Managing hardware (BBD-specified) netlist files ...Managing cache ...Elaborating instances ...bram_block (lmb_bram) - D:\mb-jpeg\system.mhs:115 - elaborating IPbram_block (data_bram_0) - D:\mb-jpeg\system.mhs:211 - elaborating IPbram_block (data_bram_1) - D:\mb-jpeg\system.mhs:227 - elaborating IPWriting HDL for elaborated instances ...Inserting wrapper level ...Completion time: 3.00 secondsConstructing platform-level signal connectivity ...Completion time: 3.00 secondsWriting (top-level) BMM ...Writing BMM - D:\mb-jpeg\implementation\system.bmmWriting (top-level and wrappers) HDL ...Generating synthesis project file ...Running XST synthesis ...INFO:MDT - The following instances are synthesized with XST. The MPD optionIMP_NETLIST=TRUE indicates that a NGC file is to be produced using XSTsynthesis. IMP_NETLIST=FALSE (default) instances are not synthesized.microblaze_0_wrapper (microblaze_0) - D:\mb-jpeg\system.mhs:35 - Running XSTsynthesismb_opb_wrapper (mb_opb) - D:\mb-jpeg\system.mhs:55 - Running XST synthesisdebug_module_wrapper (debug_module) - D:\mb-jpeg\system.mhs:63 - Running XSTsynthesisilmb_wrapper (ilmb) - D:\mb-jpeg\system.mhs:81 - Running XST synthesisdlmb_wrapper (dlmb) - D:\mb-jpeg\system.mhs:89 - Running XST synthesisdlmb_cntlr_wrapper (dlmb_cntlr) - D:\mb-jpeg\system.mhs:97 - Running XSTsynthesisilmb_cntlr_wrapper (ilmb_cntlr) - D:\mb-jpeg\system.mhs:106 - Running XSTsynthesislmb_bram_wrapper (lmb_bram) - D:\mb-jpeg\system.mhs:115 - Running XST synthesisrs232_uart_1_wrapper (rs232_uart_1) - D:\mb-jpeg\system.mhs:122 - Running XSTsynthesissysace_compactflash_wrapper (sysace_compactflash) - D:\mb-jpeg\system.mhs:138 -Running XST synthesisleds_4bit_wrapper (leds_4bit) - D:\mb-jpeg\system.mhs:155 - Running XSTsynthesisdipsws_4bit_wrapper (dipsws_4bit) - D:\mb-jpeg\system.mhs:169 - Running XSTsynthesispushbuttons_5bit_wrapper (pushbuttons_5bit) - D:\mb-jpeg\system.mhs:183 -Running XST synthesisdcm_0_wrapper (dcm_0) - D:\mb-jpeg\system.mhs:197 - Running XST synthesisdata_bram_0_wrapper (data_bram_0) - D:\mb-jpeg\system.mhs:211 - Running XSTsynthesisdata_bram_if_cntlr_0_wrapper (data_bram_if_cntlr_0) - D:\mb-jpeg\system.mhs:218- Running XST synthesisdata_bram_1_wrapper (data_bram_1) - D:\mb-jpeg\system.mhs:227 - Running XSTsynthesisdata_bram_if_cntlr_1_wrapper (data_bram_if_cntlr_1) - D:\mb-jpeg\system.mhs:234- Running XST synthesisRunning NGCBUILD ...Rebuilding cache ...Total run time: 317.00 secondsRunning synthesis...bash -c "cd synthesis; ./synthesis.sh"Release 8.1i - xst I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.-->WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 37days, this program will not operate. For more information about this product,please refer to the Evaluation Agreement, which was shipped to you along withthe Evaluation CDs.To purchase an annual license for this software, please contact your localField Applications Engineer (FAE) or salesperson. If you have any questions,or if we can assist in any way, please send an email to: eval@xilinx.comThank You!TABLE OF CONTENTS1) Synthesis Options Summary2) HDL Compilation3) HDL Analysis4) HDL Synthesis4.1) HDL Synthesis Report5) Advanced HDL Synthesis5.1) Advanced HDL Synthesis Report6) Low Level Synthesis7) Final Report7.1) Device utilization summary7.2) TIMING REPORT=========================================================================* Synthesis Options Summary *=========================================================================---- Source ParametersInput Format : MIXEDInput File Name : "system_xst.prj"---- Target ParametersTarget Device : xc2vp30ff896-7Output File Name : "../implementation/system.ngc"---- Source OptionsTop Module Name : system---- Target OptionsAdd IO Buffers : NO---- General OptionsOptimization Goal : speedHierarchy Separator : /=========================================================================WARNING:Xst:29 - Optimization Effort not specifiedThe following parameters have been added:Optimization Effort : 1==================================================================================================================================================* HDL Compilation *=========================================================================Compiling vhdl file "D:/mb-jpeg/hdl/system.vhd" in Library work.Entity <system> compiled.Entity <system> (Architecture <STRUCTURE>) compiled.=========================================================================* HDL Analysis *=========================================================================Analyzing Entity <system> (Architecture <STRUCTURE>).WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1608: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1614: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1620: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1626: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1632: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1638: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1644: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1650: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1656: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1662: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1668: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1676: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1684: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1692: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1700: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1708: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1716: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1724: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1732: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1740: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1748: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1756: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1764: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1772: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1780: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1788: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1796: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1802: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1808: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1814: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1820: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1828: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1836: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1844: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1852: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1860: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1868: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1876: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1884: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1892: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1900: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1908: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1916: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1924: Generating a Black Box for component <IBUFG>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1930: Generating a Black Box for component <IBUF>.Entity <system> analyzed. Unit <system> generated.=========================================================================* HDL Synthesis *=========================================================================Synthesizing Unit <system>.Related source file is "D:/mb-jpeg/hdl/system.vhd".Unit <system> synthesized.=========================================================================HDL Synthesis ReportFound no macro==================================================================================================================================================* Advanced HDL Synthesis *==================================================================================================================================================Advanced HDL Synthesis ReportFound no macro==================================================================================================================================================* Low Level Synthesis *=========================================================================Loading device for application Rf_Device from file '2vp30.nph' in environment c:\ISE.Optimizing unit <system> ...Mapping all equations...Building and optimizing final netlist ...=========================================================================* Final Report *=========================================================================Final ResultsTop Level Output File Name : ../implementation/system.ngcOutput Format : ngcOptimization Goal : speedKeep Hierarchy : noDesign Statistics# IOs : 45Cell Usage :# BELS : 2# GND : 1# VCC : 1# IO Buffers : 45# IBUF : 4# IBUFG : 1# IOBUF : 29# OBUF : 11# Others : 18# data_bram_0_wrapper : 1# data_bram_1_wrapper : 1# data_bram_if_cntlr_0_wrapper: 1# data_bram_if_cntlr_1_wrapper: 1# dcm_0_wrapper : 1# debug_module_wrapper : 1# dipsws_4bit_wrapper : 1# dlmb_cntlr_wrapper : 1# dlmb_wrapper : 1# ilmb_cntlr_wrapper : 1# ilmb_wrapper : 1# leds_4bit_wrapper : 1# lmb_bram_wrapper : 1# mb_opb_wrapper : 1# microblaze_0_wrapper : 1# pushbuttons_5bit_wrapper : 1# rs232_uart_1_wrapper : 1# sysace_compactflash_wrapper : 1=========================================================================Device utilization summary:---------------------------Selected Device : 2vp30ff896-7Number of bonded IOBs: 45 out of 556 8%=========================================================================TIMING REPORTNOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE.FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORTGENERATED AFTER PLACE-and-ROUTE.Clock Information:------------------No clock signals found in this designTiming Summary:---------------Speed Grade: -7Minimum period: No path foundMinimum input arrival time before clock: No path foundMaximum output required time after clock: No path foundMaximum combinational path delay: 2.924nsTiming Detail:--------------All values displayed in nanoseconds (ns)=========================================================================Timing constraint: Default path analysisTotal number of paths / destination ports: 2006 / 1977-------------------------------------------------------------------------Delay: 2.924ns (Levels of Logic = 1)Source: sysace_compactflash:SysACE_MPD_O<3> (PAD)Destination: fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3> (PAD)Data Path: sysace_compactflash:SysACE_MPD_O<3> to fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3>Gate NetCell:in->out fanout Delay Delay Logical Name (Net Name)---------------------------------------- ------------sysace_compactflash_wrapper:SysACE_MPD_O<3> 1 0.000 0.332 sysace_compactflash (fpga_0_SysACE_CompactFlash_SysACE_MPD_O<3>)IOBUF:I->IO 2.592 iobuf_22 (fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3>)----------------------------------------Total 2.924ns (2.592ns logic, 0.332ns route)(88.7% logic, 11.3% route)=========================================================================CPU : 11.09 / 11.15 s | Elapsed : 11.00 / 11.00 s-->Total memory usage is 169492 kilobytesNumber of errors : 0 ( 0 filtered)Number of warnings : 47 ( 0 filtered)Number of infos : 0 ( 0 filtered)*********************************************Running Xilinx Implementation tools..*********************************************xflow -wd implementation -p xc2vp30ff896-7 -implement xflow.opt system.ngcRelease 8.1i - Xflow I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.xflow.exe -wd implementation -p xc2vp30ff896-7 -implement xflow.opt system.ngc.... Copying flowfile c:/ISE/xilinx/data/fpga.flw into working directoryD:/mb-jpeg/implementationUsing Flow File: D:/mb-jpeg/implementation/fpga.flwUsing Option File(s):D:/mb-jpeg/implementation/xflow.optCreating Script File ...#----------------------------------------------## Starting program ngdbuild# ngdbuild -p xc2vp30ff896-7 -nt timestamp -bm system.bmmD:/mb-jpeg/implementation/system.ngc -uc system.ucf system.ngd#----------------------------------------------#Release 8.1i - ngdbuild I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -p xc2vp30ff896-7 -nt timestamp -bm system.bmm -ucsystem.ucf D:/mb-jpeg/implementation/system.ngc system.ngdReading NGO file 'D:/mb-jpeg/implementation/system.ngc' ...Loading design module "D:/mb-jpeg/implementation/microblaze_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/mb_opb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/debug_module_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/ilmb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dlmb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dlmb_cntlr_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/ilmb_cntlr_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/lmb_bram_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/rs232_uart_1_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/sysace_compactflash_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/leds_4bit_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dipsws_4bit_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/pushbuttons_5bit_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dcm_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/data_bram_0_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/data_bram_if_cntlr_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/data_bram_1_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/data_bram_if_cntlr_1_wrapper.ngc"...Applying constraints in "system.ucf" to the design...Checking timing specifications ...INFO:XdmHelpers:851 - TNM "sys_clk_pin", used in period specification"TS_sys_clk_pin", was traced into DCM instance "dcm_0/dcm_0/DCM_INST". Thefollowing new TNM groups and period specifications were generated at the DCMoutput(s):CLK0: TS_dcm_0_dcm_0_CLK0_BUF=PERIOD dcm_0_dcm_0_CLK0_BUFTS_sys_clk_pin*1.000000 HIGH 50.000000%Processing BMM file ...Checking expanded design ...WARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/word_r1_r2_unalignment' has no driverWARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/word_r1_imm_unalignment' has no driverWARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/halfword_unalignment' has no driverWARNING:NgdBuild:478 - clock net debug_module/bscan_drck1 with clock driverdebug_module/debug_module/BUFG_DRCK1 drives no clock pinsNGDBUILD Design Results Summary:Number of errors: 0Number of warnings: 4Writing NGD file "system.ngd" ...Writing NGDBUILD log file "system.bld"...NGDBUILD done.#----------------------------------------------## Starting program map# map -o system_map.ncd -pr b system.ngd system.pcf#----------------------------------------------#Release 8.1i - Map I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Using target part "2vp30ff896-7".Mapping design into LUTs...Writing file system_map.ngm...Running directed packing...Running delay-based LUT packing...Running related packing...Writing design file "system_map.ncd"...Design Summary:Number of errors: 0Number of warnings: 6Logic Utilization:Number of Slice Flip Flops: 1,183 out of 27,392 4%Number of 4 input LUTs: 1,489 out of 27,392 5%Logic Distribution:Number of occupied Slices: 1,308 out of 13,696 9%Number of Slices containing only related logic: 1,308 out of 1,308 100%Number of Slices containing unrelated logic: 0 out of 1,308 0%*See NOTES below for an explanation of the effects of unrelated logicTotal Number 4 input LUTs: 1,914 out of 27,392 6%Number used as logic: 1,489Number used as a route-thru: 7Number used for Dual Port RAMs: 256(Two LUTs used per Dual Port RAM)Number used as Shift registers: 162Number of bonded IOBs: 44 out of 556 7%IOB Flip Flops: 73Number of PPC405s: 0 out of 2 0%Number of Block RAMs: 96 out of 136 70%Number of MULT18X18s: 3 out of 136 2%Number of GCLKs: 2 out of 16 12%Number of DCMs: 1 out of 8 12%Number of BSCANs: 1 out of 1 100%Number of GTs: 0 out of 8 0%Number of GT10s: 0 out of 0 0%Number of RPM macros: 5Total equivalent gate count for design: 6,374,519Additional JTAG gate count for IOBs: 2,112Peak Memory Usage: 225 MBNOTES:Related logic is defined as being logic that shares connectivity - e.g. twoLUTs are "related" if they share common inputs. When assembling slices,Map gives priority to combine logic that is related. Doing so results inthe best timing performance.Unrelated logic shares no connectivity. Map will only begin packingunrelated logic into a slice once 99% of the slices are occupied throughrelated logic packing.Note that once logic distribution reaches the 99% level through relatedlogic packing, this does not mean the device is completely utilized.Unrelated logic packing will then begin, continuing until all usable LUTsand FFs are occupied. Depending on your timing budget, increased levels ofunrelated logic packing may adversely affect the overall timing performanceof your design.Mapping completed.See MAP report file "system_map.mrp" for details.#----------------------------------------------## Starting program par# par -w -ol high system_map.ncd system.ncd system.pcf#----------------------------------------------#Release 8.1i - par I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Constraints file: system.pcf.WARNING:Par:331 - You are using an evaluation version of Xilinx Software. In 37 days, this program will not operate. Formore information about this product, please refer to the Evaluation Agreement, which was shipped to you along withthe Evaluation CDs.To purchase an annual license for this software, please contact your local Field Applications Engineer (FAE) orsalesperson. If you have any questions, or if we can assist in any way, please send an email to: eval@xilinx.comThank You!Loading device for application Rf_Device from file '2vp30.nph' in environment c:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7Initializing temperature to 85.000 Celsius. (default - Range: -40.000 to 100.000 Celsius)Initializing voltage to 1.400 Volts. (default - Range: 1.400 to 1.600 Volts)Device speed data version: "PRODUCTION 1.92 2005-11-04".Device Utilization Summary:Number of BSCANs 1 out of 1 100%Number of BUFGMUXs 2 out of 16 12%Number of DCMs 1 out of 8 12%Number of External IOBs 44 out of 556 7%Number of LOCed IOBs 44 out of 44 100%Number of MULT18X18s 3 out of 136 2%Number of RAMB16s 96 out of 136 70%Number of SLICEs 1308 out of 13696 9%Overall effort level (-ol): HighPlacer effort level (-pl): HighPlacer cost table entry (-t): 1Router effort level (-rl): HighStarting initial Timing Analysis. REAL time: 8 secsFinished initial Timing Analysis. REAL time: 8 secsStarting PlacerPhase 1.1Phase 1.1 (Checksum:98d36f) REAL time: 12 secsPhase 2.31Phase 2.31 (Checksum:1312cfe) REAL time: 12 secsWARNING:Place:414 - The input design contains local clock signal(s). To get a better result, we recommend users run mapwith the "-timing" option set before starting the placement.Phase 3.2.Phase 3.2 (Checksum:1c9c37d) REAL time: 18 secsPhase 4.30Phase 4.30 (Checksum:26259fc) REAL time: 18 secsPhase 5.3Phase 5.3 (Checksum:2faf07b) REAL time: 18 secsPhase 6.5Phase 6.5 (Checksum:39386fa) REAL time: 19 secsPhase 7.8......................................................................................................................................................................Phase 7.8 (Checksum:12a9340) REAL time: 39 secsPhase 8.5Phase 8.5 (Checksum:4c4b3f8) REAL time: 39 secsPhase 9.18Phase 9.18 (Checksum:55d4a77) REAL time: 48 secsPhase 10.5Phase 10.5 (Checksum:5f5e0f6) REAL time: 48 secsPhase 11.27Phase 11.27 (Checksum:68e7775) REAL time: 49 secsPhase 12.24Phase 12.24 (Checksum:7270df4) REAL time: 49 secsWriting design to file system.ncdTotal REAL time to Placer completion: 52 secsTotal CPU time to Placer completion: 44 secsStarting RouterPhase 1: 14525 unrouted; REAL time: 1 mins 5 secsPhase 2: 12823 unrouted; REAL time: 1 mins 6 secsPhase 3: 2660 unrouted; REAL time: 1 mins 13 secsPhase 4: 2660 unrouted; (96135) REAL time: 1 mins 14 secsPhase 5: 2709 unrouted; (0) REAL time: 1 mins 19 secsPhase 6: 2709 unrouted; (0) REAL time: 1 mins 20 secsPhase 7: 0 unrouted; (0) REAL time: 1 mins 33 secsPhase 8: 0 unrouted; (0) REAL time: 1 mins 36 secsTotal REAL time to Router completion: 1 mins 41 secsTotal CPU time to Router completion: 1 mins 28 secsGenerating "PAR" statistics.**************************Generating Clock Report**************************+---------------------+--------------+------+------+------------+-------------+| Clock Net | Resource |Locked|Fanout|Net Skew(ns)|Max Delay(ns)|+---------------------+--------------+------+------+------------+-------------+|data_bram_0_port_BRA | | | | | || M_Clk | BUFGMUX7S| No | 948 | 0.281 | 1.258 |+---------------------+--------------+------+------+------------+-------------+| DBG_CLK_s | BUFGMUX4P| No | 139 | 0.244 | 1.257 |+---------------------+--------------+------+------+------------+-------------+|fpga_0_SysACE_Compac | | | | | || tFlash_SysACE_CLK | Local| | 62 | 0.272 | 2.463 |+---------------------+--------------+------+------+------------+-------------+|debug_module/bscan_u | | | | | || pdate | Local| | 1 | 0.000 | 0.356 |+---------------------+--------------+------+------+------------+-------------+* Net Skew is the difference between the minimum and maximum routingonly delays for the net. Note this is different from Clock Skew whichis reported in TRCE timing report. Clock Skew is the difference betweenthe minimum and maximum path delays which includes logic delays.Timing Score: 0Number of Timing Constraints that were not applied: 1Asterisk (*) preceding a constraint indicates it was not met.This may be due to a setup or hold violation.------------------------------------------------------------------------------------------------------Constraint | Requested | Actual | Logic | Absolute |Number of| | | Levels | Slack |errors------------------------------------------------------------------------------------------------------TS_dcm_0_dcm_0_CLK0_BUF = PERIOD TIMEGRP | 10.000ns | 9.773ns | 2 | 0.227ns | 0"dcm_0_dcm_0_CLK0_BUF" TS_sys_clk_pin | | | | |HIGH 50% | | | | |------------------------------------------------------------------------------------------------------NET "fpga_0_SysACE_CompactFlash_SysACE_CL | 30.000ns | 3.969ns | 2 | 26.031ns | 0K" PERIOD = 30 ns HIGH 50% | | | | |------------------------------------------------------------------------------------------------------TS_sys_clk_pin = PERIOD TIMEGRP "sys_clk_ | N/A | N/A | N/A | N/A | N/Apin" 10 ns HIGH 50% | | | | |------------------------------------------------------------------------------------------------------All constraints were met.INFO:Timing:2761 - N/A entries in the Constraints list may indicate that theconstraint does not cover any paths or that it has no requested value.Generating Pad Report.All signals are completely routed.Total REAL time to PAR completion: 1 mins 46 secsTotal CPU time to PAR completion: 1 mins 32 secsPeak Memory Usage: 310 MBPlacement: Completed - No errors found.Routing: Completed - No errors found.Timing: Completed - No errors found.Number of error messages: 0Number of warning messages: 2Number of info messages: 0Writing design to file system.ncdPAR done!#----------------------------------------------## Starting program post_par_trce# trce -e 3 -xml system.twx system.ncd system.pcf#----------------------------------------------#Release 8.1i - Trace I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Loading device for application Rf_Device from file '2vp30.nph' in environmentc:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7--------------------------------------------------------------------------------Release 8.1i Trace I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.trce -e 3 -xml system.twx system.ncd system.pcfDesign file: system.ncdPhysical constraint file: system.pcfDevice,speed: xc2vp30,-7 (PRODUCTION 1.92 2005-11-04)Report level: error report--------------------------------------------------------------------------------INFO:Timing:2752 - To get complete path coverage, use the unconstrained pathsoption. All paths that are not constrained will be reported in theunconstrained paths section(s) of the report.Timing summary:---------------Timing errors: 0 Score: 0Constraints cover 479204 paths, 0 nets, and 12146 connectionsDesign statistics:Minimum period: 9.773ns (Maximum frequency: 102.323MHz)Analysis completed Mon Jul 17 00:03:29 2006--------------------------------------------------------------------------------Generating Report ...Number of warnings: 0Number of info messages: 1Total time: 12 secsxflow done!*********************************************Running Bitgen..*********************************************cd implementation; bitgen -w -f bitgen.ut systemRelease 8.1i - Bitgen I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Loading device for application Rf_Device from file '2vp30.nph' in environmentc:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7Opened constraints file system.pcf.Mon Jul 17 00:03:38 2006Running DRC.WARNING:PhysDesignRules:367 - The signal <lmb_bram/lmb_bram/BRAM_Clk_B> isincomplete. The signal does not drive any load pins in the design.DRC detected 0 errors and 1 warnings.Creating bit map...Saving bit stream in "system.bit".Creating bit mask...Saving mask bit stream in "system.msk".Bitstream generation is complete.*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...WARNING:MDT - Elf file Encoder/executable.elf does not reside completely withinBRAM memory of processor microblaze_0.WARNING:MDT - The sections of ELF residing outside BRAMs must be initializedseparately using a debugger, a bootloader, or an ACE fileINFO:MDT - BRAM lmb_bram will be initialized with ELF of processor microblaze_0Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 data_bram_1 lmb_bram -o bimplementation/download.bitERROR:Data2MEM:31 - Out of bounds code segment for ram space in'implementation\system_bd.bmm'.Memory space 'lmb_bram' occupies [0x00000000:0x0000FFFF]Code segment #4 occupies [0x00000050:0x000141F3]ERROR:MDT - Data2Mem generated errors during executionmake: *** [implementation/download.bit] Error 1Done!At Local date and time: Mon Jul 17 00:09:08 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...At Local date and time: Mon Jul 17 00:09:09 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...make: Nothing to be done for `program'.Done!At Local date and time: Mon Jul 17 00:09:20 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename78160 4196 2776 85132 14c8c Encoder/executable.elfDone!Xilinx Platform Studio (XPS)Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.At Local date and time: Mon Jul 17 12:27:24 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename78160 4196 2776 85132 14c8c Encoder/executable.elfDone!At Local date and time: Mon Jul 17 12:27:59 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename78160 4196 2776 85132 14c8c Encoder/executable.elfDone!At Local date and time: Mon Jul 17 12:55:04 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/main.c: In function `main':encoder/main.c:29: error: redeclaration of 'i' with no linkageencoder/main.c:27: error: previous declaration of 'i' was hereencoder/main.c:46: error: `eOPENINPUT_FILE' undeclared (first use in this function)encoder/main.c:46: error: (Each undeclared identifier is reported only onceencoder/main.c:46: error: for each function it appears in.)encoder/main.c:50: error: `eOPENOUTPUT_FILE' undeclared (first use in this function)encoder/main.c:54: error: `eINVALID_BMP' undeclared (first use in this function)encoder/main.c:76: error: `compression' undeclared (first use in this function)encoder/main.c:76: error: `encode' undeclared (first use in this function)encoder/zzq.c:75:2: warning: no newline at end of filemake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Mon Jul 17 12:56:18 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/main.c: In function `main':encoder/main.c:75: error: `compression' undeclared (first use in this function)encoder/main.c:75: error: (Each undeclared identifier is reported only onceencoder/main.c:75: error: for each function it appears in.)encoder/main.c:75: error: `encode' undeclared (first use in this function)encoder/zzq.c:75:2: warning: no newline at end of filemake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Mon Jul 17 12:57:16 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:545: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:588: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:603: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename93476 4292 15552 113320 1baa8 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 13:01:10 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename49108 4288 15552 68948 10d54 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 13:46:24 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename48912 4288 15552 68752 10c90 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 13:46:52 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename49108 4288 15552 68948 10d54 Encoder/executable.elfDone!Saved MSS File.At Local date and time: Mon Jul 17 13:48:48 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mssOutput Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 3 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 208 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 3lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 214 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (data_bram_1) - D:\mb-jpeg\system.mhs line 230 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...INFO:MDT - List of peripherals addressable from processor instance microblaze_0:- dlmbWARNING:MDT - D:\mb-jpeg\system.mhs line 89 - No Driver Found for instance dlmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance dlmb- dlmb_cntlr- data_bram_if_cntlr_0- data_bram_if_cntlr_1- ilmbWARNING:MDT - D:\mb-jpeg\system.mhs line 81 - No Driver Found for instance ilmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance ilmb- ilmb_cntlr- mb_opb- debug_module- RS232_Uart_1- SysACE_CompactFlash- LEDs_4Bit- DIPSWs_4Bit- PushButtons_5BitBuilding Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver opbarb_v1_02_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\opbarb_v1_02_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver gpio_v2_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\gpio_v2_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Copying files for library xilfatfs_v1_00_a fromC:\EDK\sw\lib\sw_services\xilfatfs_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\xilfatfs_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ...Running generate for OS'es, Drivers and Libraries ...Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ...Running make for Drivers and Libraries ...Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Compiling commonCompiling ipifCompiling microblaze_disable_dcache.sCompiling microblaze_disable_exceptions.sCompiling microblaze_disable_icache.sCompiling microblaze_disable_interrupts.sCompiling microblaze_enable_dcache.sCompiling microblaze_enable_exceptions.sCompiling microblaze_enable_icache.sCompiling microblaze_enable_interrupts.sCompiling microblaze_init_dcache_range.sCompiling microblaze_init_icache_range.sCompiling microblaze_update_dcache.sCompiling microblaze_update_icache.sCompiling _exit.cCompiling errno.cCompiling fcntl.cCompiling microblaze_exception_handler.cCompiling microblaze_exceptions_g.cCompiling microblaze_interrupt_handler.cCompiling microblaze_interrupts_g.cCompiling hw_exception_handler.SCompiling src/xilfatfs_alloc.cCompiling src/xilfatfs_close.cCompiling src/xilfatfs_directory.cCompiling src/xilfatfs_fat.cCompiling src/xilfatfs_fat16.cCompiling src/xilfatfs_fat32.cCompiling src/xilfatfs_filespec.cCompiling src/xilfatfs_filestatus.cCompiling src/xilfatfs_open.cCompiling src/xilfatfs_part.cCompiling src/xilfatfs_read.cCompiling src/xilfatfs_wd.cCompiling src/xilfatfs_stats.cCompiling src/xilfatfs_bufcache.cCompiling src/xilfatfs_write.cCompiling src/xilfatfs_sysace.cmake cleanCompiling opbarbCompiling uartliteCompiling sysaceCompiling gpioCompiling cpuLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ...LibGen Done.mb-gcc -O2 testbench1/tb1.c -o Testbench1/executable.elf \-mno-xl-soft-mul -g -I./microblaze_0/include/ -Itestbench1/ -L./microblaze_0/lib/ \./microblaze_0/lib//libc.a(xil_printf.o): In function `outnum':xil_printf.o(.text+0x19c): undefined reference to `outbyte'xil_printf.o(.text+0x1c4): undefined reference to `outbyte'xil_printf.o(.text+0x258): undefined reference to `outbyte'./microblaze_0/lib//libc.a(xil_printf.o): In function `xil_printf':xil_printf.o(.text+0x2b4): undefined reference to `outbyte'xil_printf.o(.text+0x48c): undefined reference to `outbyte'./microblaze_0/lib//libc.a(xil_printf.o)(.text+0x534): more undefined references to `outbyte' followcollect2: ld returned 1 exit statusmake: *** [Testbench1/executable.elf] Error 1Done!At Local date and time: Mon Jul 17 13:49:43 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 testbench1/tb1.c -o Testbench1/executable.elf \-mno-xl-soft-mul -g -I./microblaze_0/include/ -Itestbench1/ -L./microblaze_0/lib/ \./microblaze_0/lib//libc.a(xil_printf.o): In function `outnum':xil_printf.o(.text+0x19c): undefined reference to `outbyte'xil_printf.o(.text+0x1c4): undefined reference to `outbyte'xil_printf.o(.text+0x258): undefined reference to `outbyte'./microblaze_0/lib//libc.a(xil_printf.o): In function `xil_printf':xil_printf.o(.text+0x2b4): undefined reference to `outbyte'xil_printf.o(.text+0x48c): undefined reference to `outbyte'./microblaze_0/lib//libc.a(xil_printf.o)(.text+0x534): more undefined references to `outbyte' followcollect2: ld returned 1 exit statusmake: *** [Testbench1/executable.elf] Error 1Done!At Local date and time: Mon Jul 17 13:50:03 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of file./microblaze_0/lib//libc.a(write.o): In function `write':write.o(.text+0x34): undefined reference to `outbyte'write.o(.text+0x58): undefined reference to `outbyte'./microblaze_0/lib//libc.a(xil_printf.o): In function `outnum':xil_printf.o(.text+0x1b0): undefined reference to `outbyte'xil_printf.o(.text+0x1d8): undefined reference to `outbyte'xil_printf.o(.text+0x26c): undefined reference to `outbyte'./microblaze_0/lib//libc.a(xil_printf.o)(.text+0x2c8): more undefined references to `outbyte' follow./microblaze_0/lib//libc.a(read.o): In function `read':read.o(.text+0x2c): undefined reference to `inbyte'collect2: ld returned 1 exit statusmake: *** [Encoder/executable.elf] Error 1Done!Saved MSS File.At Local date and time: Mon Jul 17 13:50:46 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mssOutput Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 3 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 208 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 3lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 214 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (data_bram_1) - D:\mb-jpeg\system.mhs line 230 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...INFO:MDT - List of peripherals addressable from processor instance microblaze_0:- dlmbWARNING:MDT - D:\mb-jpeg\system.mhs line 89 - No Driver Found for instance dlmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance dlmb- dlmb_cntlr- data_bram_if_cntlr_0- data_bram_if_cntlr_1- ilmbWARNING:MDT - D:\mb-jpeg\system.mhs line 81 - No Driver Found for instance ilmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance ilmb- ilmb_cntlr- mb_opb- debug_module- RS232_Uart_1- SysACE_CompactFlash- LEDs_4Bit- DIPSWs_4Bit- PushButtons_5BitBuilding Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver opbarb_v1_02_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\opbarb_v1_02_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver gpio_v2_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\gpio_v2_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Copying files for library xilfatfs_v1_00_a fromC:\EDK\sw\lib\sw_services\xilfatfs_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\xilfatfs_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ...Running generate for OS'es, Drivers and Libraries ...Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ...Running make for Drivers and Libraries ...Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Compiling commonCompiling ipifCompiling microblaze_disable_dcache.sCompiling microblaze_disable_exceptions.sCompiling microblaze_disable_icache.sCompiling microblaze_disable_interrupts.sCompiling microblaze_enable_dcache.sCompiling microblaze_enable_exceptions.sCompiling microblaze_enable_icache.sCompiling microblaze_enable_interrupts.sCompiling microblaze_init_dcache_range.sCompiling microblaze_init_icache_range.sCompiling microblaze_update_dcache.sCompiling microblaze_update_icache.sCompiling _exit.cCompiling errno.cCompiling fcntl.cCompiling inbyte.cCompiling microblaze_exception_handler.cCompiling microblaze_exceptions_g.cCompiling microblaze_interrupt_handler.cCompiling microblaze_interrupts_g.cCompiling outbyte.cCompiling hw_exception_handler.SCompiling src/xilfatfs_alloc.cCompiling src/xilfatfs_close.cCompiling src/xilfatfs_directory.cCompiling src/xilfatfs_fat.cCompiling src/xilfatfs_fat16.cCompiling src/xilfatfs_fat32.cCompiling src/xilfatfs_filespec.cCompiling src/xilfatfs_filestatus.cCompiling src/xilfatfs_open.cCompiling src/xilfatfs_part.cCompiling src/xilfatfs_read.cCompiling src/xilfatfs_wd.cCompiling src/xilfatfs_stats.cCompiling src/xilfatfs_bufcache.cCompiling src/xilfatfs_write.cCompiling src/xilfatfs_sysace.cmake cleanCompiling opbarbCompiling uartliteCompiling sysaceCompiling gpioCompiling cpuLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ...LibGen Done.mb-gcc -O2 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename49108 4288 15552 68948 10d54 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 13:52:51 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -Os encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename48408 4288 15552 68248 10a98 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 13:53:09 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...make: Nothing to be done for `program'.Done!At Local date and time: Mon Jul 17 13:53:21 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make Encoder_programclean; exit;" started...rm -f Encoder/executable.elfDone!At Local date and time: Mon Jul 17 13:53:28 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -Os encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename48408 4288 15552 68248 10a98 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 13:54:06 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -Os encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename48408 4288 15552 68248 10a98 Encoder/executable.elfDone!Saved MSS File.At Local date and time: Mon Jul 17 13:56:43 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mssOutput Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 3 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 208 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 3lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 214 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (data_bram_1) - D:\mb-jpeg\system.mhs line 230 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...INFO:MDT - List of peripherals addressable from processor instance microblaze_0:- dlmbWARNING:MDT - D:\mb-jpeg\system.mhs line 89 - No Driver Found for instance dlmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance dlmb- dlmb_cntlr- data_bram_if_cntlr_0- data_bram_if_cntlr_1- ilmbWARNING:MDT - D:\mb-jpeg\system.mhs line 81 - No Driver Found for instance ilmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance ilmb- ilmb_cntlr- mb_opb- debug_module- RS232_Uart_1- SysACE_CompactFlash- LEDs_4Bit- DIPSWs_4Bit- PushButtons_5BitBuilding Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver opbarb_v1_02_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\opbarb_v1_02_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver gpio_v2_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\gpio_v2_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Copying files for library xilfatfs_v1_00_a fromC:\EDK\sw\lib\sw_services\xilfatfs_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\xilfatfs_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ...Running generate for OS'es, Drivers and Libraries ...Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ...Running make for Drivers and Libraries ...Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Compiling commonCompiling ipifCompiling microblaze_disable_dcache.sCompiling microblaze_disable_exceptions.sCompiling microblaze_disable_icache.sCompiling microblaze_disable_interrupts.sCompiling microblaze_enable_dcache.sCompiling microblaze_enable_exceptions.sCompiling microblaze_enable_icache.sCompiling microblaze_enable_interrupts.sCompiling microblaze_init_dcache_range.sCompiling microblaze_init_icache_range.sCompiling microblaze_update_dcache.sCompiling microblaze_update_icache.sCompiling _exit.cCompiling errno.cCompiling fcntl.cCompiling inbyte.cCompiling microblaze_exception_handler.cCompiling microblaze_exceptions_g.cCompiling microblaze_interrupt_handler.cCompiling microblaze_interrupts_g.cCompiling outbyte.cCompiling hw_exception_handler.SCompiling src/xilfatfs_alloc.cCompiling src/xilfatfs_close.cCompiling src/xilfatfs_directory.cCompiling src/xilfatfs_fat.cCompiling src/xilfatfs_fat16.cCompiling src/xilfatfs_fat32.cCompiling src/xilfatfs_filespec.cCompiling src/xilfatfs_filestatus.cCompiling src/xilfatfs_open.cCompiling src/xilfatfs_part.cCompiling src/xilfatfs_read.cCompiling src/xilfatfs_wd.cCompiling src/xilfatfs_stats.cCompiling src/xilfatfs_bufcache.cCompiling src/xilfatfs_write.cCompiling src/xilfatfs_sysace.cmake cleanCompiling opbarbCompiling uartliteCompiling sysaceCompiling gpioCompiling cpuLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ...LibGen Done.mb-gcc -Os encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename48408 4288 10352 63048 f648 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 13:57:15 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make init_bram; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (data_bram_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) dlmb_cntlr dlmb(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmb(0x70010000-0x7001ffff) data_bram_if_cntlr_1 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...INFO:MDT - BRAM lmb_bram will be initialized with ELF of processor microblaze_0Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 data_bram_1 lmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.Done!Instance data_bram_1 bus interface PORTA connection data_bram_1_port only referenced once - select another bus connection or "No Connection"Instance dlmb_bram bus interface PORTA connection data_bram_1_port only referenced once - select another bus connection or "No Connection"Instance dlmb_bram bus interface PORTA connection data_bram_1_port only referenced once - select another bus connection or "No Connection"Instance dlmb_bram bus interface PORTA connection data_bram_1_port only referenced once - select another bus connection or "No Connection"At Local date and time: Mon Jul 17 14:01:13 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make netlist; exit;" started...****************************************************Creating system netlist for hardware specification..****************************************************platgen -p xc2vp30ff896-7 -lang vhdl -lp D:/XilinxXUP/lib/ -st xst system.mhsRelease Xilinx EDK 8.1 - platgen EDK_I.18.7Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Command Line: platgen -p xc2vp30ff896-7 -lang vhdl -lp D:/XilinxXUP/lib/ -st xstsystem.mhsParse system.mhs ...Read MPD definitions ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 2 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 207 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 2lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 213 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (dlmb_bram) - D:\mb-jpeg\system.mhs line 229 - tool overridingc_memsize value 16384 to 0x10000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...Running UPDATE Tcl procedures for OPTION PLATGEN_SYSLEVEL_UPDATE_PROC...Modify defaults ...Processing licensed instances ...Completion time: 0.00 secondsCreating hardware output directories ...Managing hardware (BBD-specified) netlist files ...Managing cache ...microblaze (microblaze_0) - D:\mb-jpeg\system.mhs:35 - Copying cacheimplementation netlistopb_v20 (mb_opb) - D:\mb-jpeg\system.mhs:55 - Copying cache implementationnetlistopb_mdm (debug_module) - D:\mb-jpeg\system.mhs:63 - Copying cache implementationnetlistlmb_v10 (ilmb) - D:\mb-jpeg\system.mhs:81 - Copying cache implementation netlistlmb_bram_if_cntlr (ilmb_cntlr) - D:\mb-jpeg\system.mhs:106 - Copying cacheimplementation netlistopb_uartlite (rs232_uart_1) - D:\mb-jpeg\system.mhs:121 - Copying cacheimplementation netlistopb_sysace (sysace_compactflash) - D:\mb-jpeg\system.mhs:137 - Copying cacheimplementation netlistopb_gpio (leds_4bit) - D:\mb-jpeg\system.mhs:154 - Copying cache implementationnetlistopb_gpio (dipsws_4bit) - D:\mb-jpeg\system.mhs:168 - Copying cacheimplementation netlistopb_gpio (pushbuttons_5bit) - D:\mb-jpeg\system.mhs:182 - Copying cacheimplementation netlistdcm_module (dcm_0) - D:\mb-jpeg\system.mhs:196 - Copying cache implementationnetlistbram_block (data_bram_0) - D:\mb-jpeg\system.mhs:210 - Copying cacheimplementation netlistlmb_bram_if_cntlr (data_bram_if_cntlr_0) - D:\mb-jpeg\system.mhs:217 - Copyingcache implementation netlistElaborating instances ...bram_block (ilmb_bram) - D:\mb-jpeg\system.mhs:115 - elaborating IPbram_block (data_bram_0) - D:\mb-jpeg\system.mhs:210 - elaborating IPbram_block (dlmb_bram) - D:\mb-jpeg\system.mhs:226 - elaborating IPWriting HDL for elaborated instances ...Inserting wrapper level ...Completion time: 3.00 secondsConstructing platform-level signal connectivity ...Completion time: 3.00 secondsWriting (top-level) BMM ...Writing BMM - D:\mb-jpeg\implementation\system.bmmWriting (top-level and wrappers) HDL ...Generating synthesis project file ...Running XST synthesis ...INFO:MDT - The following instances are synthesized with XST. The MPD optionIMP_NETLIST=TRUE indicates that a NGC file is to be produced using XSTsynthesis. IMP_NETLIST=FALSE (default) instances are not synthesized.dlmb_wrapper (dlmb) - D:\mb-jpeg\system.mhs:89 - Running XST synthesisdlmb_cntlr_wrapper (dlmb_cntlr) - D:\mb-jpeg\system.mhs:97 - Running XSTsynthesisilmb_bram_wrapper (ilmb_bram) - D:\mb-jpeg\system.mhs:115 - Running XSTsynthesisdlmb_bram_wrapper (dlmb_bram) - D:\mb-jpeg\system.mhs:226 - Running XSTsynthesisRunning NGCBUILD ...Rebuilding cache ...Total run time: 63.00 secondsRunning synthesis...bash -c "cd synthesis; ./synthesis.sh"Release 8.1i - xst I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.-->TABLE OF CONTENTS1) Synthesis Options Summary2) HDL Compilation3) HDL Analysis4) HDL Synthesis4.1) HDL Synthesis Report5) Advanced HDL Synthesis5.1) Advanced HDL Synthesis Report6) Low Level Synthesis7) Final Report7.1) Device utilization summary7.2) TIMING REPORT=========================================================================* Synthesis Options Summary *=========================================================================---- Source ParametersInput Format : MIXEDInput File Name : "system_xst.prj"---- Target ParametersTarget Device : xc2vp30ff896-7Output File Name : "../implementation/system.ngc"---- Source OptionsTop Module Name : system---- Target OptionsAdd IO Buffers : NO---- General OptionsOptimization Goal : speedHierarchy Separator : /=========================================================================WARNING:Xst:29 - Optimization Effort not specifiedThe following parameters have been added:Optimization Effort : 1==================================================================================================================================================* HDL Compilation *=========================================================================WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 36days, this program will not operate. For more information about this product,please refer to the Evaluation Agreement, which was shipped to you along withthe Evaluation CDs.To purchase an annual license for this software, please contact your localField Applications Engineer (FAE) or salesperson. If you have any questions,or if we can assist in any way, please send an email to: eval@xilinx.comThank You!Compiling vhdl file "D:/mb-jpeg/hdl/system.vhd" in Library work.Entity <system> compiled.Entity <system> (Architecture <STRUCTURE>) compiled.=========================================================================* HDL Analysis *=========================================================================Analyzing Entity <system> (Architecture <STRUCTURE>).WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1556: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1562: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1568: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1574: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1580: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1586: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1592: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1598: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1604: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1610: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1616: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1624: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1632: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1640: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1648: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1656: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1664: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1672: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1680: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1688: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1696: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1704: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1712: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1720: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1728: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1736: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1744: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1750: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1756: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1762: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1768: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1776: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1784: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1792: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1800: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1808: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1816: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1824: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1832: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1840: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1848: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1856: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1864: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1872: Generating a Black Box for component <IBUFG>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1878: Generating a Black Box for component <IBUF>.Entity <system> analyzed. Unit <system> generated.=========================================================================* HDL Synthesis *=========================================================================Synthesizing Unit <system>.Related source file is "D:/mb-jpeg/hdl/system.vhd".Unit <system> synthesized.=========================================================================HDL Synthesis ReportFound no macro==================================================================================================================================================* Advanced HDL Synthesis *==================================================================================================================================================Advanced HDL Synthesis ReportFound no macro==================================================================================================================================================* Low Level Synthesis *=========================================================================Loading device for application Rf_Device from file '2vp30.nph' in environment c:\ISE.Optimizing unit <system> ...Mapping all equations...Building and optimizing final netlist ...=========================================================================* Final Report *=========================================================================Final ResultsTop Level Output File Name : ../implementation/system.ngcOutput Format : ngcOptimization Goal : speedKeep Hierarchy : noDesign Statistics# IOs : 45Cell Usage :# BELS : 2# GND : 1# VCC : 1# IO Buffers : 45# IBUF : 4# IBUFG : 1# IOBUF : 29# OBUF : 11# Others : 17# data_bram_0_wrapper : 1# data_bram_if_cntlr_0_wrapper: 1# dcm_0_wrapper : 1# debug_module_wrapper : 1# dipsws_4bit_wrapper : 1# dlmb_bram_wrapper : 1# dlmb_cntlr_wrapper : 1# dlmb_wrapper : 1# ilmb_bram_wrapper : 1# ilmb_cntlr_wrapper : 1# ilmb_wrapper : 1# leds_4bit_wrapper : 1# mb_opb_wrapper : 1# microblaze_0_wrapper : 1# pushbuttons_5bit_wrapper : 1# rs232_uart_1_wrapper : 1# sysace_compactflash_wrapper : 1=========================================================================Device utilization summary:---------------------------Selected Device : 2vp30ff896-7Number of bonded IOBs: 45 out of 556 8%=========================================================================TIMING REPORTNOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE.FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORTGENERATED AFTER PLACE-and-ROUTE.Clock Information:------------------No clock signals found in this designTiming Summary:---------------Speed Grade: -7Minimum period: No path foundMinimum input arrival time before clock: No path foundMaximum output required time after clock: No path foundMaximum combinational path delay: 2.924nsTiming Detail:--------------All values displayed in nanoseconds (ns)=========================================================================Timing constraint: Default path analysisTotal number of paths / destination ports: 1797 / 1768-------------------------------------------------------------------------Delay: 2.924ns (Levels of Logic = 1)Source: sysace_compactflash:SysACE_MPD_O<3> (PAD)Destination: fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3> (PAD)Data Path: sysace_compactflash:SysACE_MPD_O<3> to fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3>Gate NetCell:in->out fanout Delay Delay Logical Name (Net Name)---------------------------------------- ------------sysace_compactflash_wrapper:SysACE_MPD_O<3> 1 0.000 0.332 sysace_compactflash (fpga_0_SysACE_CompactFlash_SysACE_MPD_O<3>)IOBUF:I->IO 2.592 iobuf_22 (fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3>)----------------------------------------Total 2.924ns (2.592ns logic, 0.332ns route)(88.7% logic, 11.3% route)=========================================================================CPU : 10.13 / 10.17 s | Elapsed : 10.00 / 10.00 s-->Total memory usage is 169492 kilobytesNumber of errors : 0 ( 0 filtered)Number of warnings : 47 ( 0 filtered)Number of infos : 0 ( 0 filtered)Done!At Local date and time: Mon Jul 17 14:02:38 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make bits; exit;" started...*********************************************Running Xilinx Implementation tools..*********************************************xflow -wd implementation -p xc2vp30ff896-7 -implement xflow.opt system.ngcRelease 8.1i - Xflow I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.xflow.exe -wd implementation -p xc2vp30ff896-7 -implement xflow.opt system.ngcUsing Flow File: D:/mb-jpeg/implementation/fpga.flwUsing Option File(s):D:/mb-jpeg/implementation/xflow.optCreating Script File ...#----------------------------------------------## Starting program ngdbuild# ngdbuild -p xc2vp30ff896-7 -nt timestamp -bm system.bmmD:/mb-jpeg/implementation/system.ngc -uc system.ucf system.ngd#----------------------------------------------#Release 8.1i - ngdbuild I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -p xc2vp30ff896-7 -nt timestamp -bm system.bmm -ucsystem.ucf D:/mb-jpeg/implementation/system.ngc system.ngdReading NGO file 'D:/mb-jpeg/implementation/system.ngc' ...Loading design module "D:/mb-jpeg/implementation/microblaze_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/mb_opb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/debug_module_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/ilmb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dlmb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dlmb_cntlr_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/ilmb_cntlr_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/ilmb_bram_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/rs232_uart_1_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/sysace_compactflash_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/leds_4bit_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dipsws_4bit_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/pushbuttons_5bit_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dcm_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/data_bram_0_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/data_bram_if_cntlr_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dlmb_bram_wrapper.ngc"...Applying constraints in "system.ucf" to the design...Checking timing specifications ...INFO:XdmHelpers:851 - TNM "sys_clk_pin", used in period specification"TS_sys_clk_pin", was traced into DCM instance "dcm_0/dcm_0/DCM_INST". Thefollowing new TNM groups and period specifications were generated at the DCMoutput(s):CLK0: TS_dcm_0_dcm_0_CLK0_BUF=PERIOD dcm_0_dcm_0_CLK0_BUFTS_sys_clk_pin*1.000000 HIGH 50.000000%Processing BMM file ...Checking expanded design ...WARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/word_r1_r2_unalignment' has no driverWARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/word_r1_imm_unalignment' has no driverWARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/halfword_unalignment' has no driverWARNING:NgdBuild:478 - clock net debug_module/bscan_drck1 with clock driverdebug_module/debug_module/BUFG_DRCK1 drives no clock pinsNGDBUILD Design Results Summary:Number of errors: 0Number of warnings: 4Writing NGD file "system.ngd" ...Writing NGDBUILD log file "system.bld"...NGDBUILD done.#----------------------------------------------## Starting program map# map -o system_map.ncd -pr b system.ngd system.pcf#----------------------------------------------#Release 8.1i - Map I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Using target part "2vp30ff896-7".Mapping design into LUTs...Writing file system_map.ngm...Running directed packing...Running delay-based LUT packing...Running related packing...Writing design file "system_map.ncd"...Design Summary:Number of errors: 0Number of warnings: 5Logic Utilization:Number of Slice Flip Flops: 1,182 out of 27,392 4%Number of 4 input LUTs: 1,449 out of 27,392 5%Logic Distribution:Number of occupied Slices: 1,287 out of 13,696 9%Number of Slices containing only related logic: 1,287 out of 1,287 100%Number of Slices containing unrelated logic: 0 out of 1,287 0%*See NOTES below for an explanation of the effects of unrelated logicTotal Number 4 input LUTs: 1,874 out of 27,392 6%Number used as logic: 1,449Number used as a route-thru: 7Number used for Dual Port RAMs: 256(Two LUTs used per Dual Port RAM)Number used as Shift registers: 162Number of bonded IOBs: 44 out of 556 7%IOB Flip Flops: 73Number of PPC405s: 0 out of 2 0%Number of Block RAMs: 96 out of 136 70%Number of MULT18X18s: 3 out of 136 2%Number of GCLKs: 2 out of 16 12%Number of DCMs: 1 out of 8 12%Number of BSCANs: 1 out of 1 100%Number of GTs: 0 out of 8 0%Number of GT10s: 0 out of 0 0%Number of RPM macros: 5Total equivalent gate count for design: 6,374,271Additional JTAG gate count for IOBs: 2,112Peak Memory Usage: 224 MBNOTES:Related logic is defined as being logic that shares connectivity - e.g. twoLUTs are "related" if they share common inputs. When assembling slices,Map gives priority to combine logic that is related. Doing so results inthe best timing performance.Unrelated logic shares no connectivity. Map will only begin packingunrelated logic into a slice once 99% of the slices are occupied throughrelated logic packing.Note that once logic distribution reaches the 99% level through relatedlogic packing, this does not mean the device is completely utilized.Unrelated logic packing will then begin, continuing until all usable LUTsand FFs are occupied. Depending on your timing budget, increased levels ofunrelated logic packing may adversely affect the overall timing performanceof your design.Mapping completed.See MAP report file "system_map.mrp" for details.#----------------------------------------------## Starting program par# par -w -ol high system_map.ncd system.ncd system.pcf#----------------------------------------------#Release 8.1i - par I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Constraints file: system.pcf.WARNING:Par:331 - You are using an evaluation version of Xilinx Software. In 36 days, this program will not operate. Formore information about this product, please refer to the Evaluation Agreement, which was shipped to you along withthe Evaluation CDs.To purchase an annual license for this software, please contact your local Field Applications Engineer (FAE) orsalesperson. If you have any questions, or if we can assist in any way, please send an email to: eval@xilinx.comThank You!Loading device for application Rf_Device from file '2vp30.nph' in environment c:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7Initializing temperature to 85.000 Celsius. (default - Range: -40.000 to 100.000 Celsius)Initializing voltage to 1.400 Volts. (default - Range: 1.400 to 1.600 Volts)Device speed data version: "PRODUCTION 1.92 2005-11-04".Device Utilization Summary:Number of BSCANs 1 out of 1 100%Number of BUFGMUXs 2 out of 16 12%Number of DCMs 1 out of 8 12%Number of External IOBs 44 out of 556 7%Number of LOCed IOBs 44 out of 44 100%Number of MULT18X18s 3 out of 136 2%Number of RAMB16s 96 out of 136 70%Number of SLICEs 1287 out of 13696 9%Overall effort level (-ol): HighPlacer effort level (-pl): HighPlacer cost table entry (-t): 1Router effort level (-rl): HighStarting initial Timing Analysis. REAL time: 7 secsFinished initial Timing Analysis. REAL time: 7 secsStarting PlacerPhase 1.1Phase 1.1 (Checksum:98d21f) REAL time: 10 secsPhase 2.31Phase 2.31 (Checksum:1312cfe) REAL time: 10 secsWARNING:Place:414 - The input design contains local clock signal(s). To get a better result, we recommend users run mapwith the "-timing" option set before starting the placement.Phase 3.2.Phase 3.2 (Checksum:1c9c37d) REAL time: 16 secsPhase 4.30Phase 4.30 (Checksum:26259fc) REAL time: 16 secsPhase 5.3Phase 5.3 (Checksum:2faf07b) REAL time: 16 secsPhase 6.5Phase 6.5 (Checksum:39386fa) REAL time: 16 secsPhase 7.8............................................................................................................................................................................................Phase 7.8 (Checksum:10f6612) REAL time: 37 secsPhase 8.5Phase 8.5 (Checksum:4c4b3f8) REAL time: 37 secsPhase 9.18Phase 9.18 (Checksum:55d4a77) REAL time: 43 secsPhase 10.5Phase 10.5 (Checksum:5f5e0f6) REAL time: 43 secsPhase 11.27Phase 11.27 (Checksum:68e7775) REAL time: 44 secsPhase 12.24Phase 12.24 (Checksum:7270df4) REAL time: 44 secsWriting design to file system.ncdTotal REAL time to Placer completion: 47 secsTotal CPU time to Placer completion: 45 secsStarting RouterPhase 1: 14402 unrouted; REAL time: 58 secsPhase 2: 12560 unrouted; REAL time: 59 secsPhase 3: 2794 unrouted; REAL time: 1 mins 5 secsPhase 4: 2794 unrouted; (134943) REAL time: 1 mins 6 secsPhase 5: 2920 unrouted; (286) REAL time: 4 mins 7 secsPhase 6: 2931 unrouted; (0) REAL time: 4 mins 8 secsPhase 7: 0 unrouted; (0) REAL time: 4 mins 26 secsPhase 8: 0 unrouted; (0) REAL time: 4 mins 30 secsTotal REAL time to Router completion: 4 mins 33 secsTotal CPU time to Router completion: 4 mins 30 secsGenerating "PAR" statistics.**************************Generating Clock Report**************************+---------------------+--------------+------+------+------------+-------------+| Clock Net | Resource |Locked|Fanout|Net Skew(ns)|Max Delay(ns)|+---------------------+--------------+------+------+------------+-------------+|data_bram_0_port_BRA | | | | | || M_Clk | BUFGMUX7S| No | 915 | 0.281 | 1.258 |+---------------------+--------------+------+------+------------+-------------+| DBG_CLK_s | BUFGMUX4P| No | 139 | 0.246 | 1.257 |+---------------------+--------------+------+------+------------+-------------+|fpga_0_SysACE_Compac | | | | | || tFlash_SysACE_CLK | Local| | 62 | 0.271 | 2.464 |+---------------------+--------------+------+------+------------+-------------+|debug_module/bscan_u | | | | | || pdate | Local| | 1 | 0.000 | 0.356 |+---------------------+--------------+------+------+------------+-------------+* Net Skew is the difference between the minimum and maximum routingonly delays for the net. Note this is different from Clock Skew whichis reported in TRCE timing report. Clock Skew is the difference betweenthe minimum and maximum path delays which includes logic delays.Timing Score: 0Number of Timing Constraints that were not applied: 1Asterisk (*) preceding a constraint indicates it was not met.This may be due to a setup or hold violation.------------------------------------------------------------------------------------------------------Constraint | Requested | Actual | Logic | Absolute |Number of| | | Levels | Slack |errors------------------------------------------------------------------------------------------------------TS_dcm_0_dcm_0_CLK0_BUF = PERIOD TIMEGRP | 10.000ns | 9.867ns | 10 | 0.133ns | 0"dcm_0_dcm_0_CLK0_BUF" TS_sys_clk_pin | | | | |HIGH 50% | | | | |------------------------------------------------------------------------------------------------------NET "fpga_0_SysACE_CompactFlash_SysACE_CL | 30.000ns | 3.849ns | 2 | 26.151ns | 0K" PERIOD = 30 ns HIGH 50% | | | | |------------------------------------------------------------------------------------------------------TS_sys_clk_pin = PERIOD TIMEGRP "sys_clk_ | N/A | N/A | N/A | N/A | N/Apin" 10 ns HIGH 50% | | | | |------------------------------------------------------------------------------------------------------All constraints were met.INFO:Timing:2761 - N/A entries in the Constraints list may indicate that theconstraint does not cover any paths or that it has no requested value.Generating Pad Report.All signals are completely routed.Total REAL time to PAR completion: 4 mins 37 secsTotal CPU time to PAR completion: 4 mins 34 secsPeak Memory Usage: 313 MBPlacement: Completed - No errors found.Routing: Completed - No errors found.Timing: Completed - No errors found.Number of error messages: 0Number of warning messages: 2Number of info messages: 0Writing design to file system.ncdPAR done!#----------------------------------------------## Starting program post_par_trce# trce -e 3 -xml system.twx system.ncd system.pcf#----------------------------------------------#Release 8.1i - Trace I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Loading device for application Rf_Device from file '2vp30.nph' in environmentc:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7--------------------------------------------------------------------------------Release 8.1i Trace I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.trce -e 3 -xml system.twx system.ncd system.pcfDesign file: system.ncdPhysical constraint file: system.pcfDevice,speed: xc2vp30,-7 (PRODUCTION 1.92 2005-11-04)Report level: error report--------------------------------------------------------------------------------INFO:Timing:2752 - To get complete path coverage, use the unconstrained pathsoption. All paths that are not constrained will be reported in theunconstrained paths section(s) of the report.Timing summary:---------------Timing errors: 0 Score: 0Constraints cover 448769 paths, 0 nets, and 11479 connectionsDesign statistics:Minimum period: 9.867ns (Maximum frequency: 101.348MHz)Analysis completed Mon Jul 17 14:07:53 2006--------------------------------------------------------------------------------Generating Report ...Number of warnings: 0Number of info messages: 1Total time: 9 secsxflow done!*********************************************Running Bitgen..*********************************************cd implementation; bitgen -w -f bitgen.ut systemRelease 8.1i - Bitgen I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Loading device for application Rf_Device from file '2vp30.nph' in environmentc:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7Opened constraints file system.pcf.Mon Jul 17 14:08:02 2006Running DRC.DRC detected 0 errors and 0 warnings.Creating bit map...Saving bit stream in "system.bit".Creating bit mask...Saving mask bit stream in "system.msk".Bitstream generation is complete.Done!At Local date and time: Mon Jul 17 14:24:07 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make init_bram; exit;" started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mssOutput Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 2 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 207 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 2lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 213 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (dlmb_bram) - D:\mb-jpeg\system.mhs line 229 - tool overridingc_memsize value 16384 to 0x10000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...INFO:MDT - List of peripherals addressable from processor instance microblaze_0:- dlmbWARNING:MDT - D:\mb-jpeg\system.mhs line 89 - No Driver Found for instance dlmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance dlmb- dlmb_cntlr- data_bram_if_cntlr_0- ilmbWARNING:MDT - D:\mb-jpeg\system.mhs line 81 - No Driver Found for instance ilmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance ilmb- ilmb_cntlr- mb_opb- debug_module- RS232_Uart_1- SysACE_CompactFlash- LEDs_4Bit- DIPSWs_4Bit- PushButtons_5BitBuilding Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver opbarb_v1_02_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\opbarb_v1_02_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver gpio_v2_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\gpio_v2_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Copying files for library xilfatfs_v1_00_a fromC:\EDK\sw\lib\sw_services\xilfatfs_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\xilfatfs_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ...Running generate for OS'es, Drivers and Libraries ...Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ...Running make for Drivers and Libraries ...Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Compiling commonCompiling ipifCompiling microblaze_disable_dcache.sCompiling microblaze_disable_exceptions.sCompiling microblaze_disable_icache.sCompiling microblaze_disable_interrupts.sCompiling microblaze_enable_dcache.sCompiling microblaze_enable_exceptions.sCompiling microblaze_enable_icache.sCompiling microblaze_enable_interrupts.sCompiling microblaze_init_dcache_range.sCompiling microblaze_init_icache_range.sCompiling microblaze_update_dcache.sCompiling microblaze_update_icache.sCompiling _exit.cCompiling errno.cCompiling fcntl.cCompiling inbyte.cCompiling microblaze_exception_handler.cCompiling microblaze_exceptions_g.cCompiling microblaze_interrupt_handler.cCompiling microblaze_interrupts_g.cCompiling outbyte.cCompiling hw_exception_handler.SCompiling src/xilfatfs_alloc.cCompiling src/xilfatfs_close.cCompiling src/xilfatfs_directory.cCompiling src/xilfatfs_fat.cCompiling src/xilfatfs_fat16.cCompiling src/xilfatfs_fat32.cCompiling src/xilfatfs_filespec.cCompiling src/xilfatfs_filestatus.cCompiling src/xilfatfs_open.cCompiling src/xilfatfs_part.cCompiling src/xilfatfs_read.cCompiling src/xilfatfs_wd.cCompiling src/xilfatfs_stats.cCompiling src/xilfatfs_bufcache.cCompiling src/xilfatfs_write.cCompiling src/xilfatfs_sysace.cmake cleanCompiling opbarbCompiling uartliteCompiling sysaceCompiling gpioCompiling cpuLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ...LibGen Done.mb-gcc -Os encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename48408 4288 10352 63048 f648 Encoder/executable.elf*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.Done!Linker Script generated successfully.At Local date and time: Mon Jul 17 14:25:28 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make init_bram; exit;" started...mb-gcc -Os encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename45384 7304 13424 66112 10240 Encoder/executable.elf*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.Done!At Local date and time: Mon Jul 17 14:30:24 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 14:32:50 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...mb-gcc -Os encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename45384 7300 13428 66112 10240 Encoder/executable.elf*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 14:33:58 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -Os encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename45416 7356 13428 66200 10298 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 14:34:06 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 14:37:08 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -Os encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename46156 7364 13428 66948 10584 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 14:37:13 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 14:40:09 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -Os encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename46216 7364 13428 67008 105c0 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 14:40:14 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!Done.Done.At Local date and time: Mon Jul 17 14:44:35 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!Done.Done.Done.At Local date and time: Mon Jul 17 15:02:10 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename52732 7364 13428 73524 11f34 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 15:02:36 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!Done.At Local date and time: Mon Jul 17 15:07:36 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename52732 7364 13428 73524 11f34 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 15:07:41 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!Done.At Local date and time: Mon Jul 17 15:09:48 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename52752 7364 14196 74312 12248 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 15:09:57 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 15:12:24 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename52752 7368 14192 74312 12248 Encoder/executable.elfDone!Done.Xilinx Platform Studio (XPS)Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.At Local date and time: Mon Jul 17 21:02:15 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename52012 7336 14192 73540 11f44 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:02:25 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:03:13 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename52012 7336 14192 73540 11f44 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:03:18 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:06:43 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...make: Nothing to be done for `program'.Done!At Local date and time: Mon Jul 17 21:06:48 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!Done.Saved MSS File.At Local date and time: Mon Jul 17 21:08:00 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mssOutput Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 2 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 207 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 2lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 213 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (dlmb_bram) - D:\mb-jpeg\system.mhs line 229 - tool overridingc_memsize value 16384 to 0x10000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...INFO:MDT - List of peripherals addressable from processor instance microblaze_0:- dlmbWARNING:MDT - D:\mb-jpeg\system.mhs line 89 - No Driver Found for instance dlmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance dlmb- dlmb_cntlr- data_bram_if_cntlr_0- ilmbWARNING:MDT - D:\mb-jpeg\system.mhs line 81 - No Driver Found for instance ilmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance ilmb- ilmb_cntlr- mb_opb- debug_module- RS232_Uart_1- SysACE_CompactFlash- LEDs_4Bit- DIPSWs_4Bit- PushButtons_5BitBuilding Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver opbarb_v1_02_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\opbarb_v1_02_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver gpio_v2_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\gpio_v2_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Copying files for library xilfatfs_v1_00_a fromC:\EDK\sw\lib\sw_services\xilfatfs_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\xilfatfs_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ...Running generate for OS'es, Drivers and Libraries ...Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ...Running make for Drivers and Libraries ...Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Compiling commonCompiling ipifCompiling microblaze_disable_dcache.sCompiling microblaze_disable_exceptions.sCompiling microblaze_disable_icache.sCompiling microblaze_disable_interrupts.sCompiling microblaze_enable_dcache.sCompiling microblaze_enable_exceptions.sCompiling microblaze_enable_icache.sCompiling microblaze_enable_interrupts.sCompiling microblaze_init_dcache_range.sCompiling microblaze_init_icache_range.sCompiling microblaze_update_dcache.sCompiling microblaze_update_icache.sCompiling _exit.cCompiling errno.cCompiling fcntl.cCompiling inbyte.cCompiling microblaze_exception_handler.cCompiling microblaze_exceptions_g.cCompiling microblaze_interrupt_handler.cCompiling microblaze_interrupts_g.cCompiling outbyte.cCompiling hw_exception_handler.SCompiling src/xilfatfs_alloc.cCompiling src/xilfatfs_close.cCompiling src/xilfatfs_directory.cCompiling src/xilfatfs_fat.cCompiling src/xilfatfs_fat16.cCompiling src/xilfatfs_fat32.cCompiling src/xilfatfs_filespec.cCompiling src/xilfatfs_filestatus.cCompiling src/xilfatfs_open.cCompiling src/xilfatfs_part.cCompiling src/xilfatfs_read.cCompiling src/xilfatfs_wd.cCompiling src/xilfatfs_stats.cCompiling src/xilfatfs_bufcache.cCompiling src/xilfatfs_write.cCompiling src/xilfatfs_sysace.cmake cleanCompiling opbarbCompiling uartliteCompiling sysaceCompiling gpioCompiling cpuLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ...LibGen Done.mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename52012 7336 19392 78740 13394 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:08:53 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:10:12 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename51948 7320 19392 78660 13344 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:10:18 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:11:26 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename51948 7320 19392 78660 13344 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:11:33 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:15:27 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename51948 7320 19392 78660 13344 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:15:31 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:16:34 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename52012 7336 19392 78740 13394 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:16:41 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:17:14 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename51976 7336 19392 78704 13370 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:17:18 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:17:50 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename51932 7336 19392 78660 13344 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:17:54 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:18:29 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename51924 7336 19392 78652 1333c Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:18:34 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:22:12 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make bits; exit;" started...****************************************************Creating system netlist for hardware specification..****************************************************platgen -p xc2vp30ff896-7 -lang vhdl -lp D:/XilinxXUP/lib/ -st xst system.mhsRelease Xilinx EDK 8.1 - platgen EDK_I.18.7Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Command Line: platgen -p xc2vp30ff896-7 -lang vhdl -lp D:/XilinxXUP/lib/ -st xstsystem.mhsParse system.mhs ...Read MPD definitions ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 2 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 207 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 2lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 213 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (dlmb_bram) - D:\mb-jpeg\system.mhs line 229 - tool overridingc_memsize value 16384 to 0x10000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...Running UPDATE Tcl procedures for OPTION PLATGEN_SYSLEVEL_UPDATE_PROC...Modify defaults ...Processing licensed instances ...Completion time: 0.00 secondsCreating hardware output directories ...Managing hardware (BBD-specified) netlist files ...Managing cache ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs:55 - Copying cache implementationnetlistopb_mdm (debug_module) - D:\mb-jpeg\system.mhs:63 - Copying cache implementationnetlistlmb_v10 (ilmb) - D:\mb-jpeg\system.mhs:81 - Copying cache implementation netlistlmb_v10 (dlmb) - D:\mb-jpeg\system.mhs:89 - Copying cache implementation netlistlmb_bram_if_cntlr (dlmb_cntlr) - D:\mb-jpeg\system.mhs:97 - Copying cacheimplementation netlistlmb_bram_if_cntlr (ilmb_cntlr) - D:\mb-jpeg\system.mhs:106 - Copying cacheimplementation netlistbram_block (ilmb_bram) - D:\mb-jpeg\system.mhs:115 - Copying cacheimplementation netlistopb_uartlite (rs232_uart_1) - D:\mb-jpeg\system.mhs:121 - Copying cacheimplementation netlistopb_sysace (sysace_compactflash) - D:\mb-jpeg\system.mhs:137 - Copying cacheimplementation netlistopb_gpio (leds_4bit) - D:\mb-jpeg\system.mhs:154 - Copying cache implementationnetlistopb_gpio (dipsws_4bit) - D:\mb-jpeg\system.mhs:168 - Copying cacheimplementation netlistopb_gpio (pushbuttons_5bit) - D:\mb-jpeg\system.mhs:182 - Copying cacheimplementation netlistdcm_module (dcm_0) - D:\mb-jpeg\system.mhs:196 - Copying cache implementationnetlistbram_block (data_bram_0) - D:\mb-jpeg\system.mhs:210 - Copying cacheimplementation netlistlmb_bram_if_cntlr (data_bram_if_cntlr_0) - D:\mb-jpeg\system.mhs:217 - Copyingcache implementation netlistbram_block (dlmb_bram) - D:\mb-jpeg\system.mhs:226 - Copying cacheimplementation netlistElaborating instances ...bram_block (ilmb_bram) - D:\mb-jpeg\system.mhs:115 - elaborating IPbram_block (data_bram_0) - D:\mb-jpeg\system.mhs:210 - elaborating IPbram_block (dlmb_bram) - D:\mb-jpeg\system.mhs:226 - elaborating IPWriting HDL for elaborated instances ...Inserting wrapper level ...Completion time: 4.00 secondsConstructing platform-level signal connectivity ...Completion time: 3.00 secondsWriting (top-level) BMM ...Writing BMM - D:\mb-jpeg\implementation\system.bmmWriting (top-level and wrappers) HDL ...Generating synthesis project file ...Running XST synthesis ...INFO:MDT - The following instances are synthesized with XST. The MPD optionIMP_NETLIST=TRUE indicates that a NGC file is to be produced using XSTsynthesis. IMP_NETLIST=FALSE (default) instances are not synthesized.microblaze_0_wrapper (microblaze_0) - D:\mb-jpeg\system.mhs:35 - Running XSTsynthesisRunning NGCBUILD ...Rebuilding cache ...Total run time: 111.00 secondsRunning synthesis...bash -c "cd synthesis; ./synthesis.sh"WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 36days, this program will not operate. For more information about this product,please refer to the Evaluation Agreement, which was shipped to you along withthe Evaluation CDs.To purchase an annual license for this software, please contact your localField Applications Engineer (FAE) or salesperson. If you have any questions,or if we can assist in any way, please send an email to: eval@xilinx.comThank You!Release 8.1i - xst I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.-->TABLE OF CONTENTS1) Synthesis Options Summary2) HDL Compilation3) HDL Analysis4) HDL Synthesis4.1) HDL Synthesis Report5) Advanced HDL Synthesis5.1) Advanced HDL Synthesis Report6) Low Level Synthesis7) Final Report7.1) Device utilization summary7.2) TIMING REPORT=========================================================================* Synthesis Options Summary *=========================================================================---- Source ParametersInput Format : MIXEDInput File Name : "system_xst.prj"---- Target ParametersTarget Device : xc2vp30ff896-7Output File Name : "../implementation/system.ngc"---- Source OptionsTop Module Name : system---- Target OptionsAdd IO Buffers : NO---- General OptionsOptimization Goal : speedHierarchy Separator : /=========================================================================WARNING:Xst:29 - Optimization Effort not specifiedThe following parameters have been added:Optimization Effort : 1==================================================================================================================================================* HDL Compilation *=========================================================================Compiling vhdl file "D:/mb-jpeg/hdl/system.vhd" in Library work.Entity <system> compiled.Entity <system> (Architecture <STRUCTURE>) compiled.=========================================================================* HDL Analysis *=========================================================================Analyzing Entity <system> (Architecture <STRUCTURE>).WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1556: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1562: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1568: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1574: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1580: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1586: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1592: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1598: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1604: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1610: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1616: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1624: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1632: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1640: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1648: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1656: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1664: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1672: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1680: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1688: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1696: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1704: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1712: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1720: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1728: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1736: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1744: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1750: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1756: Generating a Black Box for component <OBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1762: Generating a Black Box for component <IBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1768: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1776: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1784: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1792: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1800: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1808: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1816: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1824: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1832: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1840: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1848: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1856: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1864: Generating a Black Box for component <IOBUF>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1872: Generating a Black Box for component <IBUFG>.WARNING:Xst:766 - "D:/mb-jpeg/hdl/system.vhd" line 1878: Generating a Black Box for component <IBUF>.Entity <system> analyzed. Unit <system> generated.=========================================================================* HDL Synthesis *=========================================================================Synthesizing Unit <system>.Related source file is "D:/mb-jpeg/hdl/system.vhd".Unit <system> synthesized.=========================================================================HDL Synthesis ReportFound no macro==================================================================================================================================================* Advanced HDL Synthesis *==================================================================================================================================================Advanced HDL Synthesis ReportFound no macro==================================================================================================================================================* Low Level Synthesis *=========================================================================Loading device for application Rf_Device from file '2vp30.nph' in environment c:\ISE.Optimizing unit <system> ...Mapping all equations...Building and optimizing final netlist ...=========================================================================* Final Report *=========================================================================Final ResultsTop Level Output File Name : ../implementation/system.ngcOutput Format : ngcOptimization Goal : speedKeep Hierarchy : noDesign Statistics# IOs : 45Cell Usage :# BELS : 2# GND : 1# VCC : 1# IO Buffers : 45# IBUF : 4# IBUFG : 1# IOBUF : 29# OBUF : 11# Others : 17# data_bram_0_wrapper : 1# data_bram_if_cntlr_0_wrapper: 1# dcm_0_wrapper : 1# debug_module_wrapper : 1# dipsws_4bit_wrapper : 1# dlmb_bram_wrapper : 1# dlmb_cntlr_wrapper : 1# dlmb_wrapper : 1# ilmb_bram_wrapper : 1# ilmb_cntlr_wrapper : 1# ilmb_wrapper : 1# leds_4bit_wrapper : 1# mb_opb_wrapper : 1# microblaze_0_wrapper : 1# pushbuttons_5bit_wrapper : 1# rs232_uart_1_wrapper : 1# sysace_compactflash_wrapper : 1=========================================================================Device utilization summary:---------------------------Selected Device : 2vp30ff896-7Number of bonded IOBs: 45 out of 556 8%=========================================================================TIMING REPORTNOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE.FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORTGENERATED AFTER PLACE-and-ROUTE.Clock Information:------------------No clock signals found in this designTiming Summary:---------------Speed Grade: -7Minimum period: No path foundMinimum input arrival time before clock: No path foundMaximum output required time after clock: No path foundMaximum combinational path delay: 2.924nsTiming Detail:--------------All values displayed in nanoseconds (ns)=========================================================================Timing constraint: Default path analysisTotal number of paths / destination ports: 1797 / 1768-------------------------------------------------------------------------Delay: 2.924ns (Levels of Logic = 1)Source: sysace_compactflash:SysACE_MPD_O<3> (PAD)Destination: fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3> (PAD)Data Path: sysace_compactflash:SysACE_MPD_O<3> to fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3>Gate NetCell:in->out fanout Delay Delay Logical Name (Net Name)---------------------------------------- ------------sysace_compactflash_wrapper:SysACE_MPD_O<3> 1 0.000 0.332 sysace_compactflash (fpga_0_SysACE_CompactFlash_SysACE_MPD_O<3>)IOBUF:I->IO 2.592 iobuf_22 (fpga_0_SysACE_CompactFlash_SysACE_MPD_pin<3>)----------------------------------------Total 2.924ns (2.592ns logic, 0.332ns route)(88.7% logic, 11.3% route)=========================================================================CPU : 11.78 / 12.06 s | Elapsed : 12.00 / 12.00 s-->Total memory usage is 169492 kilobytesNumber of errors : 0 ( 0 filtered)Number of warnings : 47 ( 0 filtered)Number of infos : 0 ( 0 filtered)*********************************************Running Xilinx Implementation tools..*********************************************xflow -wd implementation -p xc2vp30ff896-7 -implement xflow.opt system.ngcRelease 8.1i - Xflow I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.xflow.exe -wd implementation -p xc2vp30ff896-7 -implement xflow.opt system.ngcUsing Flow File: D:/mb-jpeg/implementation/fpga.flwUsing Option File(s):D:/mb-jpeg/implementation/xflow.optCreating Script File ...#----------------------------------------------## Starting program ngdbuild# ngdbuild -p xc2vp30ff896-7 -nt timestamp -bm system.bmmD:/mb-jpeg/implementation/system.ngc -uc system.ucf system.ngd#----------------------------------------------#Release 8.1i - ngdbuild I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -p xc2vp30ff896-7 -nt timestamp -bm system.bmm -ucsystem.ucf D:/mb-jpeg/implementation/system.ngc system.ngdReading NGO file 'D:/mb-jpeg/implementation/system.ngc' ...Loading design module "D:/mb-jpeg/implementation/microblaze_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/mb_opb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/debug_module_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/ilmb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dlmb_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dlmb_cntlr_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/ilmb_cntlr_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/ilmb_bram_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/rs232_uart_1_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/sysace_compactflash_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/leds_4bit_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dipsws_4bit_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/pushbuttons_5bit_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dcm_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/data_bram_0_wrapper.ngc"...Loading design module"D:/mb-jpeg/implementation/data_bram_if_cntlr_0_wrapper.ngc"...Loading design module "D:/mb-jpeg/implementation/dlmb_bram_wrapper.ngc"...Applying constraints in "system.ucf" to the design...Checking timing specifications ...INFO:XdmHelpers:851 - TNM "sys_clk_pin", used in period specification"TS_sys_clk_pin", was traced into DCM instance "dcm_0/dcm_0/DCM_INST". Thefollowing new TNM groups and period specifications were generated at the DCMoutput(s):CLK0: TS_dcm_0_dcm_0_CLK0_BUF=PERIOD dcm_0_dcm_0_CLK0_BUFTS_sys_clk_pin*1.000000 HIGH 50.000000%Processing BMM file ...Checking expanded design ...WARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/word_r1_r2_unalignment' has no driverWARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/word_r1_imm_unalignment' has no driverWARNING:NgdBuild:452 - logical net'microblaze_0/microblaze_0/Data_Flow_I/halfword_unalignment' has no driverWARNING:NgdBuild:478 - clock net debug_module/bscan_drck1 with clock driverdebug_module/debug_module/BUFG_DRCK1 drives no clock pinsNGDBUILD Design Results Summary:Number of errors: 0Number of warnings: 4Writing NGD file "system.ngd" ...Writing NGDBUILD log file "system.bld"...NGDBUILD done.#----------------------------------------------## Starting program map# map -o system_map.ncd -pr b system.ngd system.pcf#----------------------------------------------#Release 8.1i - Map I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Using target part "2vp30ff896-7".Mapping design into LUTs...Writing file system_map.ngm...Running directed packing...Running delay-based LUT packing...Running related packing...Writing design file "system_map.ncd"...Design Summary:Number of errors: 0Number of warnings: 7Logic Utilization:Number of Slice Flip Flops: 1,186 out of 27,392 4%Number of 4 input LUTs: 1,461 out of 27,392 5%Logic Distribution:Number of occupied Slices: 1,303 out of 13,696 9%Number of Slices containing only related logic: 1,303 out of 1,303 100%Number of Slices containing unrelated logic: 0 out of 1,303 0%*See NOTES below for an explanation of the effects of unrelated logicTotal Number 4 input LUTs: 1,904 out of 27,392 6%Number used as logic: 1,461Number used as a route-thru: 9Number used for Dual Port RAMs: 256(Two LUTs used per Dual Port RAM)Number used as Shift registers: 178Number of bonded IOBs: 44 out of 556 7%IOB Flip Flops: 73Number of PPC405s: 0 out of 2 0%Number of Block RAMs: 96 out of 136 70%Number of MULT18X18s: 3 out of 136 2%Number of GCLKs: 2 out of 16 12%Number of DCMs: 1 out of 8 12%Number of BSCANs: 1 out of 1 100%Number of GTs: 0 out of 8 0%Number of GT10s: 0 out of 0 0%Number of RPM macros: 7Total equivalent gate count for design: 6,375,453Additional JTAG gate count for IOBs: 2,112Peak Memory Usage: 225 MBNOTES:Related logic is defined as being logic that shares connectivity - e.g. twoLUTs are "related" if they share common inputs. When assembling slices,Map gives priority to combine logic that is related. Doing so results inthe best timing performance.Unrelated logic shares no connectivity. Map will only begin packingunrelated logic into a slice once 99% of the slices are occupied throughrelated logic packing.Note that once logic distribution reaches the 99% level through relatedlogic packing, this does not mean the device is completely utilized.Unrelated logic packing will then begin, continuing until all usable LUTsand FFs are occupied. Depending on your timing budget, increased levels ofunrelated logic packing may adversely affect the overall timing performanceof your design.Mapping completed.See MAP report file "system_map.mrp" for details.#----------------------------------------------## Starting program par# par -w -ol high system_map.ncd system.ncd system.pcf#----------------------------------------------#Release 8.1i - par I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Constraints file: system.pcf.WARNING:Par:331 - You are using an evaluation version of Xilinx Software. In 36 days, this program will not operate. Formore information about this product, please refer to the Evaluation Agreement, which was shipped to you along withthe Evaluation CDs.To purchase an annual license for this software, please contact your local Field Applications Engineer (FAE) orsalesperson. If you have any questions, or if we can assist in any way, please send an email to: eval@xilinx.comThank You!Loading device for application Rf_Device from file '2vp30.nph' in environment c:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7Initializing temperature to 85.000 Celsius. (default - Range: -40.000 to 100.000 Celsius)Initializing voltage to 1.400 Volts. (default - Range: 1.400 to 1.600 Volts)Device speed data version: "PRODUCTION 1.92 2005-11-04".Device Utilization Summary:Number of BSCANs 1 out of 1 100%Number of BUFGMUXs 2 out of 16 12%Number of DCMs 1 out of 8 12%Number of External IOBs 44 out of 556 7%Number of LOCed IOBs 44 out of 44 100%Number of MULT18X18s 3 out of 136 2%Number of RAMB16s 96 out of 136 70%Number of SLICEs 1303 out of 13696 9%Overall effort level (-ol): HighPlacer effort level (-pl): HighPlacer cost table entry (-t): 1Router effort level (-rl): HighStarting initial Timing Analysis. REAL time: 8 secsFinished initial Timing Analysis. REAL time: 8 secsStarting PlacerPhase 1.1Phase 1.1 (Checksum:98d29f) REAL time: 11 secsPhase 2.31Phase 2.31 (Checksum:1312cfe) REAL time: 11 secsWARNING:Place:414 - The input design contains local clock signal(s). To get a better result, we recommend users run mapwith the "-timing" option set before starting the placement.Phase 3.2.Phase 3.2 (Checksum:1c9c37d) REAL time: 17 secsPhase 4.30Phase 4.30 (Checksum:26259fc) REAL time: 17 secsPhase 5.3Phase 5.3 (Checksum:2faf07b) REAL time: 17 secsPhase 6.5Phase 6.5 (Checksum:39386fa) REAL time: 17 secsPhase 7.8.............................................................................................................................Phase 7.8 (Checksum:ea0b47) REAL time: 32 secsPhase 8.5Phase 8.5 (Checksum:4c4b3f8) REAL time: 32 secsPhase 9.18Phase 9.18 (Checksum:55d4a77) REAL time: 39 secsPhase 10.5Phase 10.5 (Checksum:5f5e0f6) REAL time: 39 secsPhase 11.27Phase 11.27 (Checksum:68e7775) REAL time: 40 secsPhase 12.24Phase 12.24 (Checksum:7270df4) REAL time: 40 secsWriting design to file system.ncdTotal REAL time to Placer completion: 43 secsTotal CPU time to Placer completion: 40 secsStarting RouterPhase 1: 14550 unrouted; REAL time: 55 secsPhase 2: 12697 unrouted; REAL time: 56 secsPhase 3: 2691 unrouted; REAL time: 1 mins 2 secsPhase 4: 2691 unrouted; (184914) REAL time: 1 mins 3 secsPhase 5: 2794 unrouted; (2856) REAL time: 3 mins 27 secsPhase 6: 2805 unrouted; (0) REAL time: 3 mins 36 secsPhase 7: 0 unrouted; (0) REAL time: 4 mins 9 secsPhase 8: 0 unrouted; (0) REAL time: 4 mins 12 secsTotal REAL time to Router completion: 4 mins 16 secsTotal CPU time to Router completion: 4 mins 9 secsGenerating "PAR" statistics.**************************Generating Clock Report**************************+---------------------+--------------+------+------+------------+-------------+| Clock Net | Resource |Locked|Fanout|Net Skew(ns)|Max Delay(ns)|+---------------------+--------------+------+------+------------+-------------+|data_bram_0_port_BRA | | | | | || M_Clk | BUFGMUX7S| No | 915 | 0.281 | 1.258 |+---------------------+--------------+------+------+------------+-------------+| DBG_CLK_s | BUFGMUX4P| No | 148 | 0.271 | 1.257 |+---------------------+--------------+------+------+------------+-------------+|fpga_0_SysACE_Compac | | | | | || tFlash_SysACE_CLK | Local| | 62 | 0.272 | 2.463 |+---------------------+--------------+------+------+------------+-------------+|debug_module/bscan_u | | | | | || pdate | Local| | 1 | 0.000 | 0.356 |+---------------------+--------------+------+------+------------+-------------+* Net Skew is the difference between the minimum and maximum routingonly delays for the net. Note this is different from Clock Skew whichis reported in TRCE timing report. Clock Skew is the difference betweenthe minimum and maximum path delays which includes logic delays.Timing Score: 0Number of Timing Constraints that were not applied: 1Asterisk (*) preceding a constraint indicates it was not met.This may be due to a setup or hold violation.------------------------------------------------------------------------------------------------------Constraint | Requested | Actual | Logic | Absolute |Number of| | | Levels | Slack |errors------------------------------------------------------------------------------------------------------TS_dcm_0_dcm_0_CLK0_BUF = PERIOD TIMEGRP | 10.000ns | 9.824ns | 3 | 0.176ns | 0"dcm_0_dcm_0_CLK0_BUF" TS_sys_clk_pin | | | | |HIGH 50% | | | | |------------------------------------------------------------------------------------------------------NET "fpga_0_SysACE_CompactFlash_SysACE_CL | 30.000ns | 3.779ns | 2 | 26.221ns | 0K" PERIOD = 30 ns HIGH 50% | | | | |------------------------------------------------------------------------------------------------------TS_sys_clk_pin = PERIOD TIMEGRP "sys_clk_ | N/A | N/A | N/A | N/A | N/Apin" 10 ns HIGH 50% | | | | |------------------------------------------------------------------------------------------------------All constraints were met.INFO:Timing:2761 - N/A entries in the Constraints list may indicate that theconstraint does not cover any paths or that it has no requested value.Generating Pad Report.All signals are completely routed.Total REAL time to PAR completion: 4 mins 20 secsTotal CPU time to PAR completion: 4 mins 13 secsPeak Memory Usage: 318 MBPlacement: Completed - No errors found.Routing: Completed - No errors found.Timing: Completed - No errors found.Number of error messages: 0Number of warning messages: 2Number of info messages: 0Writing design to file system.ncdPAR done!#----------------------------------------------## Starting program post_par_trce# trce -e 3 -xml system.twx system.ncd system.pcf#----------------------------------------------#Release 8.1i - Trace I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Loading device for application Rf_Device from file '2vp30.nph' in environmentc:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7--------------------------------------------------------------------------------Release 8.1i Trace I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.trce -e 3 -xml system.twx system.ncd system.pcfDesign file: system.ncdPhysical constraint file: system.pcfDevice,speed: xc2vp30,-7 (PRODUCTION 1.92 2005-11-04)Report level: error report--------------------------------------------------------------------------------INFO:Timing:2752 - To get complete path coverage, use the unconstrained pathsoption. All paths that are not constrained will be reported in theunconstrained paths section(s) of the report.Timing summary:---------------Timing errors: 0 Score: 0Constraints cover 465713 paths, 0 nets, and 11564 connectionsDesign statistics:Minimum period: 9.824ns (Maximum frequency: 101.792MHz)Analysis completed Mon Jul 17 21:30:02 2006--------------------------------------------------------------------------------Generating Report ...Number of warnings: 0Number of info messages: 1Total time: 16 secsxflow done!*********************************************Running Bitgen..*********************************************cd implementation; bitgen -w -f bitgen.ut systemRelease 8.1i - Bitgen I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Loading device for application Rf_Device from file '2vp30.nph' in environmentc:\ISE."system" is an NCD, version 3.1, device xc2vp30, package ff896, speed -7Opened constraints file system.pcf.Mon Jul 17 21:30:15 2006Running DRC.DRC detected 0 errors and 0 warnings.Creating bit map...Saving bit stream in "system.bit".Creating bit mask...Saving mask bit stream in "system.msk".Bitstream generation is complete.Done!At Local date and time: Mon Jul 17 21:38:41 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mssOutput Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 to virtex2pbram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2popb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2popb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 to virtex2pbram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pbram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs line 55 - 2 master(s) : 6 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs line 81 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs line 89 - 1 master(s) : 2 slave(s)Check port drivers...WARNING:MDT - dcm_0_lock (LOCKED) - D:\mb-jpeg\system.mhs line 207 - floatingconnection!Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 39 - tool overriding c_num_masters value 4 to 2opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpdline 40 - tool overriding c_num_slaves value 4 to 6lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpdline 39 - tool overriding c_lmb_num_slaves value 4 to 2lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 38 - tool overriding c_memsize value 2048 to 0x10000bram_block (data_bram_0) - D:\mb-jpeg\system.mhs line 213 - tool overridingc_memsize value 16384 to 0x10000lmb_bram_if_cntlr (data_bram_if_cntlr_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd line 45 - tool overriding c_mask value 0x00800000 to0x70c70000bram_block (dlmb_bram) - D:\mb-jpeg\system.mhs line 229 - tool overridingc_memsize value 16384 to 0x10000Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Performing System level DRCs on properties...INFO:MDT - List of peripherals addressable from processor instance microblaze_0:- dlmbWARNING:MDT - D:\mb-jpeg\system.mhs line 89 - No Driver Found for instance dlmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance dlmb- dlmb_cntlr- data_bram_if_cntlr_0- ilmbWARNING:MDT - D:\mb-jpeg\system.mhs line 81 - No Driver Found for instance ilmb.To avoid seeing this warning, assign the appropriate driver or driver"generic 1.00.a " to instance ilmb- ilmb_cntlr- mb_opb- debug_module- RS232_Uart_1- SysACE_CompactFlash- LEDs_4Bit- DIPSWs_4Bit- PushButtons_5BitBuilding Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver opbarb_v1_02_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\opbarb_v1_02_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver gpio_v2_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\gpio_v2_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Copying files for library xilfatfs_v1_00_a fromC:\EDK\sw\lib\sw_services\xilfatfs_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\xilfatfs_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ...Running generate for OS'es, Drivers and Libraries ...Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ...Running make for Drivers and Libraries ...Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g"Compiling commonCompiling ipifCompiling microblaze_disable_dcache.sCompiling microblaze_disable_exceptions.sCompiling microblaze_disable_icache.sCompiling microblaze_disable_interrupts.sCompiling microblaze_enable_dcache.sCompiling microblaze_enable_exceptions.sCompiling microblaze_enable_icache.sCompiling microblaze_enable_interrupts.sCompiling microblaze_init_dcache_range.sCompiling microblaze_init_icache_range.sCompiling microblaze_update_dcache.sCompiling microblaze_update_icache.sCompiling _exit.cCompiling errno.cCompiling fcntl.cCompiling inbyte.cCompiling microblaze_exception_handler.cCompiling microblaze_exceptions_g.cCompiling microblaze_interrupt_handler.cCompiling microblaze_interrupts_g.cCompiling outbyte.cCompiling hw_exception_handler.SCompiling src/xilfatfs_alloc.cCompiling src/xilfatfs_close.cCompiling src/xilfatfs_directory.cCompiling src/xilfatfs_fat.cCompiling src/xilfatfs_fat16.cCompiling src/xilfatfs_fat32.cCompiling src/xilfatfs_filespec.cCompiling src/xilfatfs_filestatus.cCompiling src/xilfatfs_open.cCompiling src/xilfatfs_part.cCompiling src/xilfatfs_read.cCompiling src/xilfatfs_wd.cCompiling src/xilfatfs_stats.cCompiling src/xilfatfs_bufcache.cCompiling src/xilfatfs_write.cCompiling src/xilfatfs_sysace.cmake cleanCompiling opbarbCompiling uartliteCompiling sysaceCompiling gpioCompiling cpuLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ...LibGen Done.mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename51924 7336 19392 78652 1333c Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:39:19 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:39:58 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename51924 7336 19392 78652 1333c Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:40:02 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:47:01 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/io.c: In function `getbmpheader':encoder/io.c:59: error: structure has no member named `ncolors'encoder/io.c:59: error: structure has no member named `ncolors'encoder/zzq.c:75:2: warning: no newline at end of filemake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Mon Jul 17 21:48:11 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of file/cygdrive/c/DOCUME~1/S041945/LOCALS~1/Temp/ccwnXwTJ.o: In function `getbmpheader':/cygdrive/d/mb-jpeg/encoder/io.c:50: undefined reference to `htonl'/cygdrive/d/mb-jpeg/encoder/io.c:51: undefined reference to `htonl'/cygdrive/d/mb-jpeg/encoder/io.c:52: undefined reference to `htonl'/cygdrive/d/mb-jpeg/encoder/io.c:53: undefined reference to `hton'/cygdrive/d/mb-jpeg/encoder/io.c:54: undefined reference to `hton'/cygdrive/d/mb-jpeg/encoder/io.c:55: undefined reference to `htonl'/cygdrive/d/mb-jpeg/encoder/io.c:56: undefined reference to `htonl'/cygdrive/d/mb-jpeg/encoder/io.c:57: undefined reference to `htonl'/cygdrive/d/mb-jpeg/encoder/io.c:58: undefined reference to `htonl'/cygdrive/d/mb-jpeg/encoder/io.c:59: undefined reference to `htonl'/cygdrive/c/DOCUME~1/S041945/LOCALS~1/Temp/ccwnXwTJ.o:/cygdrive/d/mb-jpeg/encoder/io.c:60: more undefined references to `htonl' followcollect2: ld returned 1 exit statusmake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Mon Jul 17 21:48:35 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename54056 7336 19392 80784 13b90 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:48:41 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:49:10 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename54056 7336 19392 80784 13b90 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:49:14 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!Done.At Local date and time: Mon Jul 17 21:51:03 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:553: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:596: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:611: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename54140 7336 19392 80868 13be4 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 21:51:15 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 21:59:53 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c:25:21: xup2pro.h: No such file or directoryencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/io.c:4:21: xup2pro.h: No such file or directoryencoder/io.c: In function `writejpegfooter':encoder/io.c:258: error: parse error before "sizeof"encoder/zzq.c:75:2: warning: no newline at end of filemake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Mon Jul 17 22:00:14 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c:25:21: xup2pro.h: No such file or directoryencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/io.c:4:21: xup2pro.h: No such file or directoryencoder/zzq.c:75:2: warning: no newline at end of filemake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Mon Jul 17 22:00:53 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename42788 5540 19340 67668 10854 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 22:01:00 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 22:01:27 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename43444 5572 19340 68356 10b04 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 22:01:37 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 22:38:23 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileIn file included from encoder/huffman.c:25:encoder/xup2pro.h:48: error: conflicting types for 'bmpsize'encoder/xup2pro.h:31: error: previous declaration of 'bmpsize' was hereencoder/xup2pro.h:48: error: conflicting types for 'bmpsize'encoder/xup2pro.h:31: error: previous declaration of 'bmpsize' was hereencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeIn file included from encoder/io.c:4:encoder/xup2pro.h:48: error: conflicting types for 'bmpsize'encoder/xup2pro.h:31: error: previous declaration of 'bmpsize' was hereencoder/xup2pro.h:48: error: conflicting types for 'bmpsize'encoder/xup2pro.h:31: error: previous declaration of 'bmpsize' was hereIn file included from encoder/main.c:6:encoder/xup2pro.h:48: error: conflicting types for 'bmpsize'encoder/xup2pro.h:31: error: previous declaration of 'bmpsize' was hereencoder/xup2pro.h:48: error: conflicting types for 'bmpsize'encoder/xup2pro.h:31: error: previous declaration of 'bmpsize' was hereencoder/zzq.c:75:2: warning: no newline at end of filemake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Mon Jul 17 22:39:36 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename42772 5556 19348 67676 1085c Encoder/executable.elfDone!At Local date and time: Mon Jul 17 22:39:45 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 22:41:18 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 22:44:56 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename43596 5588 19348 68532 10bb4 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 22:45:04 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 22:48:43 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/main.c: In function `main':encoder/main.c:56: error: parse error before ')' tokenencoder/main.c: At top level:encoder/main.c:59: error: parse error before numeric constantencoder/main.c:59: warning: data definition has no type or storage classencoder/main.c:60: warning: parameter names (without types) in function declarationencoder/main.c:60: warning: data definition has no type or storage classencoder/main.c:62: error: parse error before "if"encoder/main.c:70: error: parse error before string constantencoder/main.c:70: error: conflicting types for 'xil_printf'/cygdrive/c/EDK/gnu/microblaze/nt/bin/../lib/gcc/microblaze/3.4.1/../../../../microblaze/sys-include/stdio.h:135: error: previous declaration of 'xil_printf' was hereencoder/main.c:70: error: conflicting types for 'xil_printf'/cygdrive/c/EDK/gnu/microblaze/nt/bin/../lib/gcc/microblaze/3.4.1/../../../../microblaze/sys-include/stdio.h:135: error: previous declaration of 'xil_printf' was hereencoder/main.c:70: warning: data definition has no type or storage classencoder/main.c:71: error: parse error before string constantencoder/main.c:71: warning: data definition has no type or storage classencoder/main.c:73: error: `bmpheader' undeclared here (not in a function)encoder/main.c:73: warning: data definition has no type or storage classencoder/main.c:74: warning: data definition has no type or storage classencoder/main.c:75: warning: data definition has no type or storage classencoder/main.c:76: warning: data definition has no type or storage classencoder/main.c:77: warning: data definition has no type or storage classencoder/main.c:78: warning: data definition has no type or storage classencoder/main.c:79: warning: data definition has no type or storage classencoder/main.c:80: warning: parameter names (without types) in function declarationencoder/main.c:80: error: conflicting types for 'writejpegheader'encoder/io.h:115: error: previous declaration of 'writejpegheader' was hereencoder/main.c:80: error: conflicting types for 'writejpegheader'encoder/io.h:115: error: previous declaration of 'writejpegheader' was hereencoder/main.c:80: warning: data definition has no type or storage classencoder/main.c:82: error: parse error before "for"encoder/main.c:85: warning: parameter names (without types) in function declarationencoder/main.c:85: error: conflicting types for 'RGB2YCrCb'encoder/io.h:126: error: previous declaration of 'RGB2YCrCb' was hereencoder/main.c:85: error: conflicting types for 'RGB2YCrCb'encoder/io.h:126: error: previous declaration of 'RGB2YCrCb' was hereencoder/main.c:85: warning: data definition has no type or storage classencoder/main.c:86: error: parse error before "for"encoder/main.c:90: warning: parameter names (without types) in function declarationencoder/main.c:90: error: conflicting types for 'zzq'encoder/zzq.h:14: error: previous declaration of 'zzq' was hereencoder/main.c:90: error: conflicting types for 'zzq'encoder/zzq.h:14: error: previous declaration of 'zzq' was hereencoder/main.c:90: warning: data definition has no type or storage classencoder/main.c:91: error: redefinition of 'Ydcvalue'encoder/main.c:77: error: previous definition of 'Ydcvalue' was hereencoder/main.c:91: error: `outfile' undeclared here (not in a function)encoder/main.c:91: error: `component' undeclared here (not in a function)encoder/main.c:91: warning: passing arg 5 of `EncodeDataUnit' from incompatible pointer typeencoder/main.c:91: error: initializer element is not constantencoder/main.c:91: warning: data definition has no type or storage classencoder/main.c:92: error: parse error before "break"encoder/main.c:95: warning: parameter names (without types) in function declarationencoder/main.c:95: warning: data definition has no type or storage classencoder/main.c:96: error: redefinition of 'Crdcvalue'encoder/main.c:78: error: previous definition of 'Crdcvalue' was hereencoder/main.c:96: warning: passing arg 5 of `EncodeDataUnit' from incompatible pointer typeencoder/main.c:96: error: initializer element is not constantencoder/main.c:96: warning: data definition has no type or storage classencoder/main.c:97: error: parse error before "break"encoder/main.c:100: warning: parameter names (without types) in function declarationencoder/main.c:100: warning: data definition has no type or storage classencoder/main.c:101: error: redefinition of 'Cbdcvalue'encoder/main.c:79: error: previous definition of 'Cbdcvalue' was hereencoder/main.c:101: warning: passing arg 5 of `EncodeDataUnit' from incompatible pointer typeencoder/main.c:101: error: initializer element is not constantencoder/main.c:101: warning: data definition has no type or storage classencoder/main.c:102: error: parse error before "break"encoder/main.c:107: error: parse error before '&' tokenencoder/main.c:107: error: conflicting types for 'HuffmanEncodeFinishSend'encoder/huffman.h:6: error: previous declaration of 'HuffmanEncodeFinishSend' was hereencoder/main.c:107: error: conflicting types for 'HuffmanEncodeFinishSend'encoder/huffman.h:6: error: previous declaration of 'HuffmanEncodeFinishSend' was hereencoder/main.c:107: warning: data definition has no type or storage classencoder/main.c:108: error: parse error before string constantencoder/main.c:109: warning: parameter names (without types) in function declarationencoder/main.c:109: error: conflicting types for 'writejpegfooter'encoder/io.h:117: error: previous declaration of 'writejpegfooter' was hereencoder/main.c:109: error: conflicting types for 'writejpegfooter'encoder/io.h:117: error: previous declaration of 'writejpegfooter' was hereencoder/main.c:109: warning: data definition has no type or storage classencoder/main.c:112: warning: parameter names (without types) in function declarationencoder/main.c:112: warning: data definition has no type or storage classencoder/main.c:113: warning: parameter names (without types) in function declarationencoder/main.c:113: warning: data definition has no type or storage classencoder/main.c:114: error: parse error before "return"encoder/zzq.c:75:2: warning: no newline at end of filemake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Mon Jul 17 22:49:15 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/zzq.c:75:2: warning: no newline at end of filemb-size Encoder/executable.elftext data bss dec hex filename43692 5604 19348 68644 10c24 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 22:49:22 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 23:25:07 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename42944 5604 19372 67920 10950 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 23:32:29 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43000 5624 19368 67992 10998 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 23:32:35 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 23:37:13 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 23:47:46 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43152 5676 19372 68200 10a68 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 23:47:52 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Mon Jul 17 23:53:39 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/dct.c:105:3: warning: no newline at end of fileencoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43192 5676 19372 68240 10a90 Encoder/executable.elfDone!At Local date and time: Mon Jul 17 23:53:49 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:04:10 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43220 5660 19372 68252 10a9c Encoder/executable.elfDone!At Local date and time: Tue Jul 18 00:04:15 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:06:49 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43392 5660 19372 68424 10b48 Encoder/executable.elfDone!At Local date and time: Tue Jul 18 00:06:53 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:15:53 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43120 5656 19376 68152 10a38 Encoder/executable.elfDone!At Local date and time: Tue Jul 18 00:15:57 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:17:34 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43152 5660 19380 68192 10a60 Encoder/executable.elf*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:20:33 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43152 5660 19380 68192 10a60 Encoder/executable.elf*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:23:34 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43172 5676 19380 68228 10a84 Encoder/executable.elf*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:23:56 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:24:29 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43192 5676 19380 68248 10a98 Encoder/executable.elfDone!At Local date and time: Tue Jul 18 00:24:39 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:25:50 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:31:33 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43192 5676 19380 68248 10a98 Encoder/executable.elfDone!At Local date and time: Tue Jul 18 00:31:38 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:34:03 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43064 5668 19380 68112 10a10 Encoder/executable.elfDone!At Local date and time: Tue Jul 18 00:34:43 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:44:24 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43136 5660 19380 68176 10a50 Encoder/executable.elf*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.Cable connection failed.Connecting to cable (Parallel Port - LPT2).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.Cable connection failed.Connecting to cable (Parallel Port - LPT3).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.Cable connection failed.Connecting to cable (Parallel Port - LPT4).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.Cable connection failed.Connecting to cable (Usb Port - USB21).Checking cable driver.Driver xusbdfwu.sys version: 1018 (1018).Driver windrvr6.sys version = 7.0.0.0.Cable connection failed.Cable autodetection failed.ERROR:iMPACT:1075 - setCable must be set before this operation.ERROR:iMPACT:1075 - setCable must be set before this operation.ERROR:iMPACT:589 - No devices on chain, can't assign fileERROR:iMPACT:1075 - setCable must be set before this operation.// *** BATCH CMD : quitCount ReleaseSemaphore rc = 298.Done!At Local date and time: Tue Jul 18 00:45:04 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:45:42 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:580: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:627: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:642: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43136 5660 19380 68176 10a50 Encoder/executable.elf*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 00:52:46 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:599: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:646: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typeencoder/huffman.c:661: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43124 5664 19768 68556 10bcc Encoder/executable.elfDone!At Local date and time: Tue Jul 18 00:52:54 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 01:04:45 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:599: warning: comparison is always true due to limited range of data typeencoder/huffman.c: In function `EncodeDataUnit':encoder/huffman.c:663: warning: passing arg 3 of `ReverseExtend' from incompatible pointer typemb-size Encoder/executable.elftext data bss dec hex filename43132 5664 19768 68564 10bd4 Encoder/executable.elf*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 0 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 3 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!At Local date and time: Tue Jul 18 01:06:01 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make download; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:599: warning: comparison is always true due to limited range of data typemb-size Encoder/executable.elftext data bss dec hex filename43140 5664 19768 68572 10bdc Encoder/executable.elf*********************************************Initializing BRAM contents of the bitstream*********************************************bitinit system.mhs -lp D:/XilinxXUP/lib/ -pe microblaze_0 Encoder/executable.elf \-bt implementation/system.bit -o implementation/download.bitbitinit version Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) Xilinx Inc. 2002.Parsing MHS File system.mhs...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_mdm_v2_00_a/data/opb_mdm_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm_module_v2_1_0.tcl ...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 63 - tool overriding c_family value virtex2 tomicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd line 64 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:93 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:100 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpdline 42 - tool overriding c_family value virtex2 tobram_block (ilmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toopb_gpio (leds_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (dipsws_4bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 toopb_gpio (pushbuttons_5bit) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_gpio_v2_1_0.mpdline 41 - tool overriding c_family value virtex2 todcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd line 60 - tool overriding c_family value virtex2 tobram_block (data_bram_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 tobram_block (dlmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 toPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/bram_if_cntlr_v2_1_0.tcl ...Address Map for Processor microblaze_0(0x00000000-0x0000ffff) ilmb_cntlr ilmb(0x00010000-0x0001ffff) dlmb_cntlr dlmb(0x40000000-0x4000ffff) PushButtons_5Bit mb_opb(0x40020000-0x4002ffff) LEDs_4Bit mb_opb(0x40040000-0x4004ffff) DIPSWs_4Bit mb_opb(0x40600000-0x4060ffff) RS232_Uart_1 mb_opb(0x41400000-0x4140ffff) debug_module mb_opb(0x41800000-0x4180ffff) SysACE_CompactFlash mb_opb(0x70000000-0x7000ffff) data_bram_if_cntlr_0 dlmbInitializing Memory...Checking ELFs associated with MICROBLAZE instance microblaze_0 for overlap...Analyzing file Encoder/executable.elf...Running Data2Mem with the following command:data2mem -bm implementation/system_bd -bt implementation/system.bit -bdEncoder/executable.elf tag data_bram_0 dlmb_bram ilmb_bram -o bimplementation/download.bitMemory Initialization completed successfully.*********************************************Downloading Bitstream onto the target board*********************************************impact -batch etc/download.cmdRelease 8.1i - iMPACT I.24Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.// *** BATCH CMD : setMode -bs// *** BATCH CMD : setCable -port autoAutoDetecting cable. Please wait.Connecting to cable (Parallel Port - LPT1).Checking cable driver.Driver windrvr6.sys version = 7.0.0.0.No resources.LPT base address = 0378h.ECP base address = 0778h.ECP hardware is detected.Cable connection established.Connecting to cable (Parallel Port - LPT1) in ECP mode.Checking cable driver.Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.Cable Type = 1, Revision = 3.Setting cable speed to 5 MHz.Cable connection established.// *** BATCH CMD : identifyIdentifying chain contents ....Version is 0001'1': : Manufacturer's ID =Xilinx xc2vp30, Version : 1PMSPEC -- Overriding Xilinx file <c:/ISE/virtex2p/data/virtex2p.acd> with localfile <c:/ISE/virtex2p/data/virtex2p.acd>INFO:iMPACT:1777 -Reading c:/ISE/virtex2p/data/xc2vp30.bsd...INFO:iMPACT:501 - '1': Added Device xc2vp30 successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 0000'2': : Manufacturer's ID =Xilinx xccace, Version : 0INFO:iMPACT:1777 -Reading c:/ISE/acecf/data/xccace.bsd...INFO:iMPACT:501 - '1': Added Device xccace successfully.--------------------------------------------------------------------------------------------------------------------------------------------Version is 1111'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15INFO:iMPACT:1777 -Reading c:/ISE/xcfp/data/xcf32p.bsd...INFO:iMPACT:501 - '1': Added Device xcf32p successfully.--------------------------------------------------------------------------------------------------------------------------------------------done.[1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1][0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1]Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.Elapsed time = 1 sec.// *** BATCH CMD : identifyMPMElapsed time = 0 sec.// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"'3': Loading file 'implementation/download.bit' ...done.INFO:iMPACT:501 - '3': Added Device xc2vp30 successfully.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------// *** BATCH CMD : program -p 3Chain TCK freq = 10000000.Validating chain...Boundary-scan chain validated successfully.'3':Programming device...done.'3': Reading status register contents...CRC error : 0Decryptor security set : 0DCM locked : 1DCI matched : 1legacy input error : 0status of GTS_CFG_B : 1status of GWE : 1status of GHIGH : 1value of MODE pin M0 : 1value of MODE pin M1 : 0value of MODE pin M2 : 1value of CFG_RDY (INIT_B) : 1DONEIN input from DONE pin : 1IDCODE not validated while trying to write FDRI : 0write FDRI issued before or after decrypt operation: 0Decryptor keys not used in proper sequence : 0INFO:iMPACT:2219 - Status register values:INFO:iMPACT - 0011 0111 1011 1000 0000 0000 0000 0000INFO:iMPACT:579 - '3': Completed downloading bit file to device.INFO:iMPACT:580 - '3':Checking done pin ....done.'3': Programmed successfully.Elapsed time = 4 sec.// *** BATCH CMD : quit----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Done!Xilinx Platform Studio (XPS)Xilinx EDK 8.1 Build EDK_I.18.7Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.At Local date and time: Tue Jul 18 01:16:31 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:599: warning: comparison is always true due to limited range of data typeencoder/main.c: In function `main':encoder/main.c:57: error: parse error before '}' tokenmake: *** [Encoder/executable.elf] Error 1Done!At Local date and time: Tue Jul 18 01:16:52 2006xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" started...mb-gcc -O0 encoder/dct.c encoder/huffman.c encoder/io.c encoder/main.c encoder/zzq.c -o Encoder/executable.elf \-mno-xl-soft-mul -Wp,-D__MICROBLAZE -Wl,-T -Wl,Encoder_linker_script.ld -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \encoder/huffman.c: In function `HuffmanEncodeFinishSend':encoder/huffman.c:599: warning: comparison is always true due to limited range of data typemb-size Encoder/executable.elftext data bss dec hex filename43176 5664 19768 68608 10c00 Encoder/executable.elfDone!