Subversion Repositories scarts

2006-12-21  Hans-Peter Nilsson  <hp@axis.com>

        * acconfig.h: Remove.
        * config.in: Regenerate.

2006-06-13  Richard Earnshaw  <rearnsha@arm.com>

        * configure: Regenerated.

2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>

        * configure: Regenerated.

2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>

        * configure: Regenerated.

2005-03-23  Mark Kettenis  <kettenis@gnu.org>

        * configure: Regenerate.

2005-02-21  Corinna Vinschen  <vinschen@redhat.com>

        * iq2000.c: Eliminate need to include gdb/sim-iq2000.h.

2005-02-18  Corinna Vinschen  <vinschen@redhat.com>

        * configure.ac: Rename from configure.in and pull up to autoconf 2.59.
        * configure: Regenerate.

2002-03-18  Jeff Johnston  <jjohnstn@redhat.com>

        * sem-switch.c: Regenerated.
        * sem.c: Ditto.

2002-01-28  Jeff Johnston  <jjohnstn@redhat.com>

        * arch.c: Regenerated.
        * arch.h: Ditto.
        * cpu.c: Ditto.
        * cpu.h: Ditto.
        * cpuall.h: Ditto.
        * decode.c: Ditto.
        * decode.h: Ditto.
        * model.c: Ditto.
        * sem-switch.c: Ditto.
        * sem.c: Ditto.

2001-11-16  Jeff Johnston  <jjohnstn@redhat.com>

        * decode.c: Regenerated after putting orui into machine-specific
        files.
        * decode.h: Ditto.
        * model.c: Ditto.
        * sem-switch.c: Ditto.
        * sem.c: Ditto.

2001-11-13  Jeff Johnston  <jjohnstn@redhat.com>

        * cpu.h: Regenerated after changing jump and branch operands
        so that no bit masking is performed.
        * decode.c: Ditto.
        * iq2000.c (get_h_pc): Change to return h_pc directly.
        (set_h_pc): Change to always set the insn mask bit.
        * sim-if.c (iq2000bf_disassemble_insn): Change to pass the
        pc untouched.
        (sim_create_inferior): Changed so starting address is taken
        directly from link.  If not specified, start address is
        0 with insn mask set on.

2001-11-08  Jeff Johnston  <jjohnstn@redhat.com>

        * cpu.h: Regenerated after making jump operand UINT.
        * decode.c: Ditto.

2001-10-31  Jeff Johnston  <jjohnstn@redhat.com>

        * sem-switch.c: Regenerated after fixing lb, lbu, lh, lw,
        sb, sh, and sw insns handling of offset operand.
        * sem.c: Ditto.

2001-10-30  Jeff Johnston  <jjohnstn@redhat.com>

        * cpu.c: Regenerated.
        * cpu.h: Ditto.
        * decode.c: Ditto.
        * sem-switch.c: Ditto.
        * sem.c: Ditto.
        * iq2000.c (get_h_pc): New routine.
        (set_h_pc): Ditto.
        (fetch_str): Translate cpu data addresses to data area.
        (do_syscall): Ditto.
        (iq2000bf_fetch_register): Use get_h_pc.
        (iq2000bf_store_register): Use set_h_pc.
        * mloop.in: Change all calls to GETIMEMxxx to use CPU2INSN
        on the pc value passed first.
        * sim-if.c (iq2000bf_disassemble_insn): New function.
        (sim_open): Add extra memory region for insn memory vs data memory.
        Also change disassembler to be iq2000bf_disassemble_insn.
        (sim_create_inferior): Translate start address using INSN2CPU macro.
        * sim-main.h (CPU2INSN, CPU2DATA, INSN2CPU, DATA2CPU): New macros
        to translate between Harvard and cpu addresses.

2001-10-26  Jeff Johnston  <jjohnstn@redhat.com>

        * sem-switch.c: Regenerated after reverting addiu
        change.
        * sem.c: Ditto.

2001-10-25  Jeff Johnston  <jjohnstn@redhat.com>

        * Makefile.in: Add -UHAVE_CPU_IQ10 for time-being until
        iq10 simulator merged here.
        * cpu.h: Regenerated after fixing addiu insn.
        * cpuall.h: Ditto.
        * decode.c: Ditto.
        * decode.h: Ditto.
        * model.c: Ditto.
        * sem-switch.c: Ditto.
        * sem.c: Ditto.

2001-09-12  Stan Cox  <scox@redhat.com>

        * iq2000/{cpu.c, cpu.h, decode.c, decode.h, model.c, sem-switch.c,
        sem.c}: Regen'd.
        * iq2000.c (do_syscall): Support system traps.
        
2001-07-05  Ben Elliston  <bje@redhat.com>

        * Makefile.in (stamp-arch): Use $(CGEN_CPU_DIR).
        (stamp-cpu): Likewise.

2001-04-02  Ben Elliston  <bje@redhat.com>

        * arch.c, arch.h: Regnerate to track recent cgen improvements.
        * cpu.c, cpu.h, cpuall.h, decode.c, decode.h: Likewise.
        * model.c, sem-switch.c, sem.c: Likewise.

2001-01-22  Ben Elliston  <bje@redhat.com>

        * cpu.h, decode.c, decode.h, model.c: Regenerate.
        * sem.c, sem-switch.c: Likewise.

        * arch.c, arch.h, cpu.c, cpu.h, cpuall.h: Regenerate.
        * decode.c, decode.h, model.c, sem.c, sem-switch.c: Likewise.

2000-07-05  Ben Elliston  <bje@redhat.com>

        * configure: Regenerated to track ../common/aclocal.m4 changes.

2000-07-04  Ben Elliston  <bje@redhat.com>

        * sem.c, sem-switch.c: Regenerate.

        * iq2000.c (do_break): Use sim_engine_halt ().
        * arch.c, decode.c, decode.h, sem.c, sem-switch.c: Regenerate.

2000-07-03  Ben Elliston  <bje@redhat.com>

        * iq2000.c (do_syscall): Examine syscall register (nominally %11).
        (do_break): Handle breakpoints.
        * tconfig.in (SIM_HAVE_BREAKPOINTS): Define.
        (SIM_BREAKPOINT, SIM_BREAKPOINT_SIZE): Likewise.

2000-06-29  Andrew Cagney  <cagney@redhat.com>

        * iq2000.c (iq2000bf_fetch_register): Implement.
        (iq2000bf_store_register): Ditto.

2000-05-17  Ben Elliston  <bje@redhat.com>

        * mloop.in (extract-simple, extract-scache): Use SEM_SKIP_COMPILE
        to set the skip count for the (skip ..) rtx.
        (extract-pbb): Likewise.
        (extract-pbb): Include the delay slot instruction of all CTI
        instructions in the pbb, not just those that may nullify their
        delay slot (eg. likely branches).

        * sem.c, sem-switch.c: Regenerate.

2000-05-16  Ben Elliston  <bje@redhat.com>

        * arch.c, cpu.c, cpu.h, decode.c, decode.h: Regenerate.
        * sem.c, sem-switch.c: Likewise.
        * mloop.in (extract-pbb): Prohibit branch instructions in the
        delay slot of branch likely instructions.

2000-05-16  Ben Elliston  <bje@redhat.com>

        * Makefile.in: New file.
        * configure.in: Ditto.
        * acconfig.h: Ditto.
        * config.in, configure: Generate.
        * arch.c, arch.h, cpu.c, cpu.h, cpuall.h: Ditto.
        * decode.c, decode.h: Ditto.
        * model.c, sem-switch.c, sem.c: Ditto.
        * mloop.in: New file.
        * iq2000.c: Ditto.
        * iq2000-sim.h: Ditto.
        * sim-if.c: Ditto.
        * sim-main.h: Ditto.
        * tconfig.in: Ditto