URL
https://opencores.org/ocsvn/scarts/scarts/trunk
Subversion Repositories scarts
[/] [scarts/] [trunk/] [toolchain/] [scarts-gdb/] [gdb-6.8/] [sim/] [testsuite/] [sim/] [h8300/] [biand.s] - Rev 26
Compare with Previous | Blame | View Log
# Hitachi H8 testcase 'biand', 'bior', 'bixor', 'bild', 'bist', 'bistz' # mach(): all # as(h8300): --defsym sim_cpu=0 # as(h8300h): --defsym sim_cpu=1 # as(h8300s): --defsym sim_cpu=2 # as(h8sx): --defsym sim_cpu=3 # ld(h8300h): -m h8300helf # ld(h8300s): -m h8300self # ld(h8sx): -m h8300sxelf .include "testutils.inc" .data byte_src: .byte 0xa5 byte_dst: .byte 0 start biand_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; biand xx:3, reg8 biand #6, r0l ; this should NOT set the carry flag. test_cc_clear biand #7, r0l ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag biand #6, r0l ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear biand #7, r0l ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. biand_imm3_ind: set_grs_a5a5 .if (sim_cpu == h8300) mov #byte_src, r1 set_ccr_zero ;; biand xx:3, ind biand #6, @r1 ; this should NOT set the carry flag. test_cc_clear biand #7, @r1 ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag biand #6, @r1 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear biand #7, @r1 ; this should clear the carry flag test_cc_clear ;;; test_h_gr16 byte_src r1 ;FIXME .else mov #byte_src, er1 set_ccr_zero ;; biand xx:3, ind biand #6, @er1 ; this should NOT set the carry flag. test_cc_clear biand #7, @er1 ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag biand #6, @er1 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear biand #7, @er1 ; this should clear the carry flag test_cc_clear test_h_gr32 byte_src er1 .endif ; h8300 test_gr_a5a5 0 ; general registers should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 biand_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; biand xx:3, aa:8 biand #6, @0x20:8 ; this should NOT set the carry flag. test_cc_clear biand #7, @0x20:8 ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag biand #6, @0x20:8 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear biand #7, @0x20:8 ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. .if (sim_cpu > h8300h) biand_imm3_abs16: set_grs_a5a5 set_ccr_zero ;; biand xx:3, aa:16 biand #6, @byte_src:16 ; this should NOT set the carry flag. test_cc_clear biand #7, @byte_src:16 ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag biand #6, @byte_src:16 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear biand #7, @byte_src:16 ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. biand_imm3_abs32: set_grs_a5a5 set_ccr_zero ;; biand xx:3, aa:32 biand #6, @byte_src:32 ; this should NOT set the carry flag. test_cc_clear biand #7, @byte_src:32 ; this should NOT set the carry flag. test_cc_clear orc #1, ccr ; set the carry flag biand #6, @byte_src:32 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear biand #7, @byte_src:32 ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. .endif bior_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; bior xx:3, reg8 bior #7, r0l ; this should NOT set the carry flag. test_cc_clear bior #6, r0l ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear orc #1, ccr ; set the carry flag bior #6, r0l ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear bior #7, r0l ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. bior_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bior xx:3, aa:8 bior #7, @0x20:8 ; this should NOT set the carry flag. test_cc_clear bior #6, @0x20:8 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear orc #1, ccr ; set the carry flag bior #6, @0x20:8 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear bior #7, @0x20:8 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. bixor_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; bixor xx:3, reg8 bixor #7, r0l ; this should NOT set the carry flag. test_cc_clear bixor #6, r0l ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear orc #1, ccr ; set the carry flag bixor #7, r0l ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear bixor #6, r0l ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. bixor_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bixor xx:3, aa:8 bixor #7, @0x20:8 ; this should NOT set the carry flag. test_cc_clear bixor #6, @0x20:8 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear orc #1, ccr ; set the carry flag bixor #7, @0x20:8 ; this should NOT clear the carry flag test_carry_set test_ovf_clear test_neg_clear test_zero_clear bixor #6, @0x20:8 ; this should clear the carry flag test_cc_clear test_grs_a5a5 ; general registers should not be changed. bild_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; bild xx:3, reg8 bild #7, r0l ; this should NOT set the carry flag. test_cc_clear bild #6, r0l ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. bild_imm3_ind: set_grs_a5a5 .if (sim_cpu == h8300) mov #byte_src, r1 set_ccr_zero ;; bild xx:3, ind bild #7, @r1 ; this should NOT set the carry flag. test_cc_clear bild #6, @r1 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear ;;; test_h_gr16 byte_src r1 ;FIXME .else mov #byte_src, er1 set_ccr_zero ;; bild xx:3, ind bild #7, @er1 ; this should NOT set the carry flag. test_cc_clear bild #6, @er1 ; this should NOT set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_h_gr32 byte_src er1 .endif ; h8300 test_gr_a5a5 0 ; general registers should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 bild_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bild xx:3, aa:8 bild #7, @0x20:8 ; this should NOT set the carry flag. test_cc_clear bild #6, @0x20:8 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. .if (sim_cpu > h8300h) bild_imm3_abs16: set_grs_a5a5 set_ccr_zero ;; bild xx:3, aa:16 bild #7, @byte_src:16 ; this should NOT set the carry flag. test_cc_clear bild #6, @byte_src:16 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. bild_imm3_abs32: set_grs_a5a5 set_ccr_zero ;; bild xx:3, aa:32 bild #7, @byte_src:32 ; this should NOT set the carry flag. test_cc_clear bild #6, @byte_src:32 ; this should set the carry flag. test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_grs_a5a5 ; general registers should not be changed. .endif bist_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; bist xx:3, reg8 bist #6, r0l ; this should set bit 6 test_cc_clear test_h_gr16 0xa5e5 r0 set_ccr_zero orc #1, ccr ; set the carry flag bist #7, r0l ; this should clear bit 7 test_carry_set test_ovf_clear test_neg_clear test_zero_clear test_h_gr16 0xa565 r0 test_gr_a5a5 1 ; Rest of general regs should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 bist_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bist xx:3, aa:8 bist #6, @0x20:8 ; this should set bit 6 test_cc_clear mov.b @0x20, r0l test_h_gr16 0xa5e5 r0 set_ccr_zero orc #1, ccr ; set the carry flag bist #7, @0x20:8 ; this should clear bit 7 test_carry_set test_ovf_clear test_neg_clear test_zero_clear mov.b @0x20, r0l test_h_gr16 0xa565 r0 test_gr_a5a5 1 ; general registers should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 .if (sim_cpu == h8sx) bistz_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bistz xx:3, aa:8 bistz #6, @0x20:8 ; this should set bit 6 test_cc_clear mov.b @0x20, r0l test_h_gr16 0xa5e5 r0 set_ccr_zero orc #4, ccr ; set the zero flag bistz #7, @0x20:8 ; this should clear bit 7 test_carry_clear test_ovf_clear test_neg_clear test_zero_set mov.b @0x20, r0l test_h_gr16 0xa565 r0 test_gr_a5a5 1 ; general registers should not be changed. test_gr_a5a5 2 test_gr_a5a5 3 test_gr_a5a5 4 test_gr_a5a5 5 test_gr_a5a5 6 test_gr_a5a5 7 .endif ; h8sx bnot_imm3_reg8: set_grs_a5a5 set_ccr_zero ;; bnot xx:3, reg8 bnot #7, r0l test_cc_clear test_h_gr16 0xa525 r0 set_ccr_zero bnot #6, r0l test_cc_clear test_h_gr16 0xa565 r0 set_ccr_zero bnot #5, r0l test_cc_clear test_h_gr16 0xa545 r0 set_ccr_zero bnot #4, r0l test_cc_clear test_h_gr16 0xa555 r0 set_ccr_zero bnot #4, r0l bnot #5, r0l bnot #6, r0l bnot #7, r0l test_cc_clear test_grs_a5a5 ; general registers should not be changed. bnot_imm3_abs8: set_grs_a5a5 mov.b r1l, @0x20 set_ccr_zero ;; bnot xx:3, aa:8 bnot #7, @0x20:8 bnot #6, @0x20:8 bnot #5, @0x20:8 bnot #4, @0x20:8 test_cc_clear test_grs_a5a5 mov @0x20, r0l test_h_gr16 0xa555 r0 pass exit 0