OpenCores
URL https://opencores.org/ocsvn/sdspi/sdspi/trunk

Subversion Repositories sdspi

[/] [sdspi/] [trunk/] [Makefile] - Rev 3

Go to most recent revision | Compare with Previous | Blame | View Log

################################################################################
##
## Filename:    Makefile
##
## Project:     SD-Card controller, using a shared SPI interface
##
## Purpose:     Coordinate building the specification for this core, the
##              Verilator Verilog check, and any bench software.
##
## Creator:     Dan Gisselquist, Ph.D.
##              Gisselquist Technology, LLC
##
################################################################################
##
## Copyright (C) 2016, Gisselquist Technology, LLC
##
## This program is free software (firmware): you can redistribute it and/or
## modify it under the terms of  the GNU General Public License as published
## by the Free Software Foundation, either version 3 of the License, or (at
## your option) any later version.
##
## This program is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with this program.  (It's in the $(ROOT)/doc directory, run make with no
## target there if the PDF file isn't present.)  If not, see
## <http://www.gnu.org/licenses/> for a copy.
##
## License:     GPL, v3, as defined and found on www.gnu.org,
##              http://www.gnu.org/licenses/gpl.html
##
##
################################################################################
##
##
.PHONY: all
all:    verilated bench
BENCH := `find bench -name Makefile` `find bench -name "*.cpp"` `find bench -name "*.h"`
RTL   := `find rtl -name "*.v"` `find rtl -name Makefile`
NOTES := # `find . -name "*.txt"` `find . -name "*.html"`
SW=
#SW    := `find sw -name "*.cpp"` `find sw -name "*.h"` \
#       `find sw -name "*.sh"` `find sw -name "*.py"`   \
#       `find sw -name "*.pl"` `find sw -name Makefile`
DEVSW=
YYMMDD:=`date +%Y%m%d`

.PHONY: archive
archive:
        tar --transform s,^,$(YYMMDD)-sdspi/, -chjf $(YYMMDD)-sdspi.tjz $(BENCH) $(SW) $(RTL) $(NOTES)

.PHONY: verilated
verilated:
        cd rtl ; $(MAKE) --no-print-directory

# The documents target does not get, nor should it be, made automatically.  This
# is because the project is intended to be shipped with the documents
# automatically built, and I don't necessarily expect all those who download
# this "core" to have LaTeX distribution necessary to rebuild the specification
# and GPL LaTeX documents into their PDF results.
.PHONY: doc
doc:
        cd doc ; $(MAKE) --no-print-directory

.PHONY: bench
bench:
        cd bench/cpp ; $(MAKE) --no-print-directory

#.PHONY: sw
# sw:
#       cd sw ; $(MAKE) --no-print-directory

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.