URL
https://opencores.org/ocsvn/sgmii/sgmii/trunk
Subversion Repositories sgmii
[/] [sgmii/] [trunk/] [sim/] [BFMs/] [SGMII_altera/] [triple_speed_ethernet-library/] [altera_tse_multi_mac_pcs.v] - Rev 20
Compare with Previous | Blame | View Log
// ------------------------------------------------------------------------- // ------------------------------------------------------------------------- // // Revision Control Information // // $RCSfile: altera_tse_multi_mac_pcs.v,v $ // $Source: /ipbu/cvs/sio/projects/TriSpeedEthernet/src/RTL/Top_level_modules/altera_tse_multi_mac_pcs.v,v $ // // $Revision: #1 $ // $Date: 2012/06/21 $ // Check in by : $Author: swbranch $ // Author : Arul Paniandi // // Project : Triple Speed Ethernet - 10/100/1000 MAC // // Description : // // Top Level Triple Speed Ethernet(10/100/1000) MAC with FIFOs, MII/GMII // interfaces, mdio module and register space (statistic, control and // management) // // ALTERA Confidential and Proprietary // Copyright 2006 (c) Altera Corporation // All rights reserved // // ------------------------------------------------------------------------- // ------------------------------------------------------------------------- (*altera_attribute = {"-name SYNCHRONIZER_IDENTIFICATION OFF" } *) module altera_tse_multi_mac_pcs /* synthesis ALTERA_ATTRIBUTE = "SUPPRESS_DA_RULE_INTERNAL=\"D101,D103,C105\"" */ #( parameter USE_SYNC_RESET = 0, // Use Synchronized Reset Inputs parameter RESET_LEVEL = 1'b 1 , // Reset Active Level parameter ENABLE_GMII_LOOPBACK = 1, // GMII_LOOPBACK_ENA : Enable GMII Loopback Logic parameter ENABLE_HD_LOGIC = 1, // HD_LOGIC_ENA : Enable Half Duplex Logic parameter ENABLE_SUP_ADDR = 1, // SUP_ADDR_ENA : Enable Supplemental Addresses parameter ENA_HASH = 1, // ENA_HASH Enable Hash Table parameter STAT_CNT_ENA = 1, // STAT_CNT_ENA Enable Statistic Counters parameter MDIO_CLK_DIV = 40 , // Host Clock Division - MDC Generation parameter CORE_VERSION = 16'h3, // ALTERA Core Version parameter CUST_VERSION = 1 , // Customer Core Version parameter REDUCED_INTERFACE_ENA = 0, // Enable the RGMII Interface parameter ENABLE_MDIO = 1, // Enable the MDIO Interface parameter ENABLE_MAGIC_DETECT = 1, // Enable magic packet detection parameter ENABLE_PADDING = 1, // Enable padding operation. parameter ENABLE_LGTH_CHECK = 1, // Enable frame length checking. parameter GBIT_ONLY = 1, // Enable Gigabit only operation. parameter MBIT_ONLY = 1, // Enable Megabit (10/100) only operation. parameter REDUCED_CONTROL = 0, // Reduced control for MAC LITE parameter CRC32DWIDTH = 4'b 1000, // input data width (informal, not for change) parameter CRC32GENDELAY = 3'b 110, // when the data from the generator is valid parameter CRC32CHECK16BIT = 1'b 0, // 1 compare two times 16 bit of the CRC (adds one pipeline step) parameter CRC32S1L2_EXTERN = 1'b0, // false: merge enable parameter ENABLE_SHIFT16 = 0, // Enable byte stuffing at packet header parameter ENABLE_MAC_FLOW_CTRL = 1'b1, // Option to enable flow control parameter ENABLE_MAC_TXADDR_SET = 1'b1, // Option to enable MAC address insertion onto 'to-be-transmitted' Ethernet frames on MAC TX data path parameter ENABLE_MAC_RX_VLAN = 1'b1, // Option to enable VLAN tagged Ethernet frames on MAC RX data path parameter ENABLE_MAC_TX_VLAN = 1'b1, // Option to enable VLAN tagged Ethernet frames on MAC TX data path parameter PHY_IDENTIFIER = 32'h 00000000, // PHY Identifier parameter DEV_VERSION = 16'h 0001 , // Customer Phy's Core Version parameter ENABLE_SGMII = 1, // Enable SGMII logic for synthesis parameter ENABLE_CLK_SHARING = 0, // Option to share clock for multiple channels (Clocks are rate-matched). parameter ENABLE_REG_SHARING = 0, // Option to share register space. Uses certain hard-coded values from input. parameter ENABLE_EXTENDED_STAT_REG = 0, // Enable a few extended statistic registers parameter MAX_CHANNELS = 1, // The number of channels in Multi-TSE component parameter ENABLE_RX_FIFO_STATUS = 1, // Enable Receive FIFO Almost Full status interface parameter CHANNEL_WIDTH = 1, // The width of the channel interface parameter ENABLE_PKT_CLASS = 1, // Enable Packet Classification Av-ST Interface parameter SYNCHRONIZER_DEPTH = 3, // Number of synchronizer // Internal parameters parameter ADDR_WIDTH = (MAX_CHANNELS > 16)? 13 : (MAX_CHANNELS > 8)? 12 : (MAX_CHANNELS > 4)? 11 : (MAX_CHANNELS > 2)? 10 : (MAX_CHANNELS > 1)? 9 : 8 ) // Port List ( // RESET / MAC REG IF / MDIO input wire reset, // Asynchronous Reset - clk Domain input wire clk, // 25MHz Host Interface Clock input wire read, // Register Read Strobe input wire write, // Register Write Strobe input wire [ADDR_WIDTH-1:0] address, // Register Address input wire [31:0] writedata, // Write Data for Host Bus output wire [31:0] readdata, // Read Data to Host Bus output wire waitrequest, // Interface Busy output wire mdc, // 2.5MHz Inteface input wire mdio_in, // MDIO Input output wire mdio_out, // MDIO Output output wire mdio_oen, // MDIO Output Enable input wire ref_clk, // Reference Clock // SHARED CLK SIGNALS output wire mac_rx_clk, // Av-ST Receive Clock output wire mac_tx_clk, // Av-ST Transmit Clock // SHARED RX STATUS input wire rx_afull_clk, // Almost full clk input wire [1:0] rx_afull_data, // Almost full data input wire rx_afull_valid, // Almost full valid input wire [CHANNEL_WIDTH-1:0] rx_afull_channel, // Almost full channel // CHANNEL 0 // PCS SIGNALS TO PHY input wire tbi_rx_clk_0, // 125MHz Recoved Clock input wire tbi_tx_clk_0, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_0, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_0, // Transmit TBI Interface output wire sd_loopback_0, // SERDES Loopback Enable output wire powerdown_0, // Powerdown Enable output wire led_crs_0, // Carrier Sense output wire led_link_0, // Valid Link output wire led_col_0, // Collision Indication output wire led_an_0, // Auto-Negotiation Status output wire led_char_err_0, // Character Error output wire led_disp_err_0, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_0, // Av-ST Receive Clock output wire mac_tx_clk_0, // Av-ST Transmit Clock output wire data_rx_sop_0, // Start of Packet output wire data_rx_eop_0, // End of Packet output wire [7:0] data_rx_data_0, // Data from FIFO output wire [4:0] data_rx_error_0, // Receive packet error output wire data_rx_valid_0, // Data Receive FIFO Valid input wire data_rx_ready_0, // Data Receive Ready output wire [4:0] pkt_class_data_0, // Frame Type Indication output wire pkt_class_valid_0, // Frame Type Indication Valid input wire data_tx_error_0, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_0, // Data from FIFO transmit input wire data_tx_valid_0, // Data FIFO transmit Empty input wire data_tx_sop_0, // Start of Packet input wire data_tx_eop_0, // END of Packet output wire data_tx_ready_0, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_0, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_0, // Forward Current Frame with CRC from Application input wire xoff_gen_0, // Xoff Pause frame generate input wire xon_gen_0, // Xon Pause frame generate input wire magic_sleep_n_0, // Enable Sleep Mode output wire magic_wakeup_0, // Wake Up Request // CHANNEL 1 // PCS SIGNALS TO PHY input wire tbi_rx_clk_1, // 125MHz Recoved Clock input wire tbi_tx_clk_1, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_1, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_1, // Transmit TBI Interface output wire sd_loopback_1, // SERDES Loopback Enable output wire powerdown_1, // Powerdown Enable output wire led_crs_1, // Carrier Sense output wire led_link_1, // Valid Link output wire led_col_1, // Collision Indication output wire led_an_1, // Auto-Negotiation Status output wire led_char_err_1, // Character Error output wire led_disp_err_1, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_1, // Av-ST Receive Clock output wire mac_tx_clk_1, // Av-ST Transmit Clock output wire data_rx_sop_1, // Start of Packet output wire data_rx_eop_1, // End of Packet output wire [7:0] data_rx_data_1, // Data from FIFO output wire [4:0] data_rx_error_1, // Receive packet error output wire data_rx_valid_1, // Data Receive FIFO Valid input wire data_rx_ready_1, // Data Receive Ready output wire [4:0] pkt_class_data_1, // Frame Type Indication output wire pkt_class_valid_1, // Frame Type Indication Valid input wire data_tx_error_1, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_1, // Data from FIFO transmit input wire data_tx_valid_1, // Data FIFO transmit Empty input wire data_tx_sop_1, // Start of Packet input wire data_tx_eop_1, // END of Packet output wire data_tx_ready_1, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_1, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_1, // Forward Current Frame with CRC from Application input wire xoff_gen_1, // Xoff Pause frame generate input wire xon_gen_1, // Xon Pause frame generate input wire magic_sleep_n_1, // Enable Sleep Mode output wire magic_wakeup_1, // Wake Up Request // CHANNEL 2 // PCS SIGNALS TO PHY input wire tbi_rx_clk_2, // 125MHz Recoved Clock input wire tbi_tx_clk_2, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_2, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_2, // Transmit TBI Interface output wire sd_loopback_2, // SERDES Loopback Enable output wire powerdown_2, // Powerdown Enable output wire led_crs_2, // Carrier Sense output wire led_link_2, // Valid Link output wire led_col_2, // Collision Indication output wire led_an_2, // Auto-Negotiation Status output wire led_char_err_2, // Character Error output wire led_disp_err_2, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_2, // Av-ST Receive Clock output wire mac_tx_clk_2, // Av-ST Transmit Clock output wire data_rx_sop_2, // Start of Packet output wire data_rx_eop_2, // End of Packet output wire [7:0] data_rx_data_2, // Data from FIFO output wire [4:0] data_rx_error_2, // Receive packet error output wire data_rx_valid_2, // Data Receive FIFO Valid input wire data_rx_ready_2, // Data Receive Ready output wire [4:0] pkt_class_data_2, // Frame Type Indication output wire pkt_class_valid_2, // Frame Type Indication Valid input wire data_tx_error_2, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_2, // Data from FIFO transmit input wire data_tx_valid_2, // Data FIFO transmit Empty input wire data_tx_sop_2, // Start of Packet input wire data_tx_eop_2, // END of Packet output wire data_tx_ready_2, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_2, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_2, // Forward Current Frame with CRC from Application input wire xoff_gen_2, // Xoff Pause frame generate input wire xon_gen_2, // Xon Pause frame generate input wire magic_sleep_n_2, // Enable Sleep Mode output wire magic_wakeup_2, // Wake Up Request // CHANNEL 3 // PCS SIGNALS TO PHY input wire tbi_rx_clk_3, // 125MHz Recoved Clock input wire tbi_tx_clk_3, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_3, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_3, // Transmit TBI Interface output wire sd_loopback_3, // SERDES Loopback Enable output wire powerdown_3, // Powerdown Enable output wire led_crs_3, // Carrier Sense output wire led_link_3, // Valid Link output wire led_col_3, // Collision Indication output wire led_an_3, // Auto-Negotiation Status output wire led_char_err_3, // Character Error output wire led_disp_err_3, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_3, // Av-ST Receive Clock output wire mac_tx_clk_3, // Av-ST Transmit Clock output wire data_rx_sop_3, // Start of Packet output wire data_rx_eop_3, // End of Packet output wire [7:0] data_rx_data_3, // Data from FIFO output wire [4:0] data_rx_error_3, // Receive packet error output wire data_rx_valid_3, // Data Receive FIFO Valid input wire data_rx_ready_3, // Data Receive Ready output wire [4:0] pkt_class_data_3, // Frame Type Indication output wire pkt_class_valid_3, // Frame Type Indication Valid input wire data_tx_error_3, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_3, // Data from FIFO transmit input wire data_tx_valid_3, // Data FIFO transmit Empty input wire data_tx_sop_3, // Start of Packet input wire data_tx_eop_3, // END of Packet output wire data_tx_ready_3, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_3, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_3, // Forward Current Frame with CRC from Application input wire xoff_gen_3, // Xoff Pause frame generate input wire xon_gen_3, // Xon Pause frame generate input wire magic_sleep_n_3, // Enable Sleep Mode output wire magic_wakeup_3, // Wake Up Request // CHANNEL 4 // PCS SIGNALS TO PHY input wire tbi_rx_clk_4, // 125MHz Recoved Clock input wire tbi_tx_clk_4, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_4, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_4, // Transmit TBI Interface output wire sd_loopback_4, // SERDES Loopback Enable output wire powerdown_4, // Powerdown Enable output wire led_crs_4, // Carrier Sense output wire led_link_4, // Valid Link output wire led_col_4, // Collision Indication output wire led_an_4, // Auto-Negotiation Status output wire led_char_err_4, // Character Error output wire led_disp_err_4, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_4, // Av-ST Receive Clock output wire mac_tx_clk_4, // Av-ST Transmit Clock output wire data_rx_sop_4, // Start of Packet output wire data_rx_eop_4, // End of Packet output wire [7:0] data_rx_data_4, // Data from FIFO output wire [4:0] data_rx_error_4, // Receive packet error output wire data_rx_valid_4, // Data Receive FIFO Valid input wire data_rx_ready_4, // Data Receive Ready output wire [4:0] pkt_class_data_4, // Frame Type Indication output wire pkt_class_valid_4, // Frame Type Indication Valid input wire data_tx_error_4, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_4, // Data from FIFO transmit input wire data_tx_valid_4, // Data FIFO transmit Empty input wire data_tx_sop_4, // Start of Packet input wire data_tx_eop_4, // END of Packet output wire data_tx_ready_4, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_4, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_4, // Forward Current Frame with CRC from Application input wire xoff_gen_4, // Xoff Pause frame generate input wire xon_gen_4, // Xon Pause frame generate input wire magic_sleep_n_4, // Enable Sleep Mode output wire magic_wakeup_4, // Wake Up Request // CHANNEL 5 // PCS SIGNALS TO PHY input wire tbi_rx_clk_5, // 125MHz Recoved Clock input wire tbi_tx_clk_5, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_5, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_5, // Transmit TBI Interface output wire sd_loopback_5, // SERDES Loopback Enable output wire powerdown_5, // Powerdown Enable output wire led_crs_5, // Carrier Sense output wire led_link_5, // Valid Link output wire led_col_5, // Collision Indication output wire led_an_5, // Auto-Negotiation Status output wire led_char_err_5, // Character Error output wire led_disp_err_5, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_5, // Av-ST Receive Clock output wire mac_tx_clk_5, // Av-ST Transmit Clock output wire data_rx_sop_5, // Start of Packet output wire data_rx_eop_5, // End of Packet output wire [7:0] data_rx_data_5, // Data from FIFO output wire [4:0] data_rx_error_5, // Receive packet error output wire data_rx_valid_5, // Data Receive FIFO Valid input wire data_rx_ready_5, // Data Receive Ready output wire [4:0] pkt_class_data_5, // Frame Type Indication output wire pkt_class_valid_5, // Frame Type Indication Valid input wire data_tx_error_5, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_5, // Data from FIFO transmit input wire data_tx_valid_5, // Data FIFO transmit Empty input wire data_tx_sop_5, // Start of Packet input wire data_tx_eop_5, // END of Packet output wire data_tx_ready_5, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_5, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_5, // Forward Current Frame with CRC from Application input wire xoff_gen_5, // Xoff Pause frame generate input wire xon_gen_5, // Xon Pause frame generate input wire magic_sleep_n_5, // Enable Sleep Mode output wire magic_wakeup_5, // Wake Up Request // CHANNEL 6 // PCS SIGNALS TO PHY input wire tbi_rx_clk_6, // 125MHz Recoved Clock input wire tbi_tx_clk_6, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_6, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_6, // Transmit TBI Interface output wire sd_loopback_6, // SERDES Loopback Enable output wire powerdown_6, // Powerdown Enable output wire led_crs_6, // Carrier Sense output wire led_link_6, // Valid Link output wire led_col_6, // Collision Indication output wire led_an_6, // Auto-Negotiation Status output wire led_char_err_6, // Character Error output wire led_disp_err_6, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_6, // Av-ST Receive Clock output wire mac_tx_clk_6, // Av-ST Transmit Clock output wire data_rx_sop_6, // Start of Packet output wire data_rx_eop_6, // End of Packet output wire [7:0] data_rx_data_6, // Data from FIFO output wire [4:0] data_rx_error_6, // Receive packet error output wire data_rx_valid_6, // Data Receive FIFO Valid input wire data_rx_ready_6, // Data Receive Ready output wire [4:0] pkt_class_data_6, // Frame Type Indication output wire pkt_class_valid_6, // Frame Type Indication Valid input wire data_tx_error_6, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_6, // Data from FIFO transmit input wire data_tx_valid_6, // Data FIFO transmit Empty input wire data_tx_sop_6, // Start of Packet input wire data_tx_eop_6, // END of Packet output wire data_tx_ready_6, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_6, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_6, // Forward Current Frame with CRC from Application input wire xoff_gen_6, // Xoff Pause frame generate input wire xon_gen_6, // Xon Pause frame generate input wire magic_sleep_n_6, // Enable Sleep Mode output wire magic_wakeup_6, // Wake Up Request // CHANNEL 7 // PCS SIGNALS TO PHY input wire tbi_rx_clk_7, // 125MHz Recoved Clock input wire tbi_tx_clk_7, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_7, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_7, // Transmit TBI Interface output wire sd_loopback_7, // SERDES Loopback Enable output wire powerdown_7, // Powerdown Enable output wire led_crs_7, // Carrier Sense output wire led_link_7, // Valid Link output wire led_col_7, // Collision Indication output wire led_an_7, // Auto-Negotiation Status output wire led_char_err_7, // Character Error output wire led_disp_err_7, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_7, // Av-ST Receive Clock output wire mac_tx_clk_7, // Av-ST Transmit Clock output wire data_rx_sop_7, // Start of Packet output wire data_rx_eop_7, // End of Packet output wire [7:0] data_rx_data_7, // Data from FIFO output wire [4:0] data_rx_error_7, // Receive packet error output wire data_rx_valid_7, // Data Receive FIFO Valid input wire data_rx_ready_7, // Data Receive Ready output wire [4:0] pkt_class_data_7, // Frame Type Indication output wire pkt_class_valid_7, // Frame Type Indication Valid input wire data_tx_error_7, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_7, // Data from FIFO transmit input wire data_tx_valid_7, // Data FIFO transmit Empty input wire data_tx_sop_7, // Start of Packet input wire data_tx_eop_7, // END of Packet output wire data_tx_ready_7, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_7, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_7, // Forward Current Frame with CRC from Application input wire xoff_gen_7, // Xoff Pause frame generate input wire xon_gen_7, // Xon Pause frame generate input wire magic_sleep_n_7, // Enable Sleep Mode output wire magic_wakeup_7, // Wake Up Request // CHANNEL 8 // PCS SIGNALS TO PHY input wire tbi_rx_clk_8, // 125MHz Recoved Clock input wire tbi_tx_clk_8, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_8, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_8, // Transmit TBI Interface output wire sd_loopback_8, // SERDES Loopback Enable output wire powerdown_8, // Powerdown Enable output wire led_crs_8, // Carrier Sense output wire led_link_8, // Valid Link output wire led_col_8, // Collision Indication output wire led_an_8, // Auto-Negotiation Status output wire led_char_err_8, // Character Error output wire led_disp_err_8, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_8, // Av-ST Receive Clock output wire mac_tx_clk_8, // Av-ST Transmit Clock output wire data_rx_sop_8, // Start of Packet output wire data_rx_eop_8, // End of Packet output wire [7:0] data_rx_data_8, // Data from FIFO output wire [4:0] data_rx_error_8, // Receive packet error output wire data_rx_valid_8, // Data Receive FIFO Valid input wire data_rx_ready_8, // Data Receive Ready output wire [4:0] pkt_class_data_8, // Frame Type Indication output wire pkt_class_valid_8, // Frame Type Indication Valid input wire data_tx_error_8, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_8, // Data from FIFO transmit input wire data_tx_valid_8, // Data FIFO transmit Empty input wire data_tx_sop_8, // Start of Packet input wire data_tx_eop_8, // END of Packet output wire data_tx_ready_8, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_8, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_8, // Forward Current Frame with CRC from Application input wire xoff_gen_8, // Xoff Pause frame generate input wire xon_gen_8, // Xon Pause frame generate input wire magic_sleep_n_8, // Enable Sleep Mode output wire magic_wakeup_8, // Wake Up Request // CHANNEL 9 // PCS SIGNALS TO PHY input wire tbi_rx_clk_9, // 125MHz Recoved Clock input wire tbi_tx_clk_9, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_9, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_9, // Transmit TBI Interface output wire sd_loopback_9, // SERDES Loopback Enable output wire powerdown_9, // Powerdown Enable output wire led_crs_9, // Carrier Sense output wire led_link_9, // Valid Link output wire led_col_9, // Collision Indication output wire led_an_9, // Auto-Negotiation Status output wire led_char_err_9, // Character Error output wire led_disp_err_9, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_9, // Av-ST Receive Clock output wire mac_tx_clk_9, // Av-ST Transmit Clock output wire data_rx_sop_9, // Start of Packet output wire data_rx_eop_9, // End of Packet output wire [7:0] data_rx_data_9, // Data from FIFO output wire [4:0] data_rx_error_9, // Receive packet error output wire data_rx_valid_9, // Data Receive FIFO Valid input wire data_rx_ready_9, // Data Receive Ready output wire [4:0] pkt_class_data_9, // Frame Type Indication output wire pkt_class_valid_9, // Frame Type Indication Valid input wire data_tx_error_9, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_9, // Data from FIFO transmit input wire data_tx_valid_9, // Data FIFO transmit Empty input wire data_tx_sop_9, // Start of Packet input wire data_tx_eop_9, // END of Packet output wire data_tx_ready_9, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_9, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_9, // Forward Current Frame with CRC from Application input wire xoff_gen_9, // Xoff Pause frame generate input wire xon_gen_9, // Xon Pause frame generate input wire magic_sleep_n_9, // Enable Sleep Mode output wire magic_wakeup_9, // Wake Up Request // CHANNEL 10 // PCS SIGNALS TO PHY input wire tbi_rx_clk_10, // 125MHz Recoved Clock input wire tbi_tx_clk_10, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_10, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_10, // Transmit TBI Interface output wire sd_loopback_10, // SERDES Loopback Enable output wire powerdown_10, // Powerdown Enable output wire led_crs_10, // Carrier Sense output wire led_link_10, // Valid Link output wire led_col_10, // Collision Indication output wire led_an_10, // Auto-Negotiation Status output wire led_char_err_10, // Character Error output wire led_disp_err_10, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_10, // Av-ST Receive Clock output wire mac_tx_clk_10, // Av-ST Transmit Clock output wire data_rx_sop_10, // Start of Packet output wire data_rx_eop_10, // End of Packet output wire [7:0] data_rx_data_10, // Data from FIFO output wire [4:0] data_rx_error_10, // Receive packet error output wire data_rx_valid_10, // Data Receive FIFO Valid input wire data_rx_ready_10, // Data Receive Ready output wire [4:0] pkt_class_data_10, // Frame Type Indication output wire pkt_class_valid_10, // Frame Type Indication Valid input wire data_tx_error_10, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_10, // Data from FIFO transmit input wire data_tx_valid_10, // Data FIFO transmit Empty input wire data_tx_sop_10, // Start of Packet input wire data_tx_eop_10, // END of Packet output wire data_tx_ready_10, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_10, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_10, // Forward Current Frame with CRC from Application input wire xoff_gen_10, // Xoff Pause frame generate input wire xon_gen_10, // Xon Pause frame generate input wire magic_sleep_n_10, // Enable Sleep Mode output wire magic_wakeup_10, // Wake Up Request // CHANNEL 11 // PCS SIGNALS TO PHY input wire tbi_rx_clk_11, // 125MHz Recoved Clock input wire tbi_tx_clk_11, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_11, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_11, // Transmit TBI Interface output wire sd_loopback_11, // SERDES Loopback Enable output wire powerdown_11, // Powerdown Enable output wire led_crs_11, // Carrier Sense output wire led_link_11, // Valid Link output wire led_col_11, // Collision Indication output wire led_an_11, // Auto-Negotiation Status output wire led_char_err_11, // Character Error output wire led_disp_err_11, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_11, // Av-ST Receive Clock output wire mac_tx_clk_11, // Av-ST Transmit Clock output wire data_rx_sop_11, // Start of Packet output wire data_rx_eop_11, // End of Packet output wire [7:0] data_rx_data_11, // Data from FIFO output wire [4:0] data_rx_error_11, // Receive packet error output wire data_rx_valid_11, // Data Receive FIFO Valid input wire data_rx_ready_11, // Data Receive Ready output wire [4:0] pkt_class_data_11, // Frame Type Indication output wire pkt_class_valid_11, // Frame Type Indication Valid input wire data_tx_error_11, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_11, // Data from FIFO transmit input wire data_tx_valid_11, // Data FIFO transmit Empty input wire data_tx_sop_11, // Start of Packet input wire data_tx_eop_11, // END of Packet output wire data_tx_ready_11, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_11, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_11, // Forward Current Frame with CRC from Application input wire xoff_gen_11, // Xoff Pause frame generate input wire xon_gen_11, // Xon Pause frame generate input wire magic_sleep_n_11, // Enable Sleep Mode output wire magic_wakeup_11, // Wake Up Request // CHANNEL 12 // PCS SIGNALS TO PHY input wire tbi_rx_clk_12, // 125MHz Recoved Clock input wire tbi_tx_clk_12, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_12, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_12, // Transmit TBI Interface output wire sd_loopback_12, // SERDES Loopback Enable output wire powerdown_12, // Powerdown Enable output wire led_crs_12, // Carrier Sense output wire led_link_12, // Valid Link output wire led_col_12, // Collision Indication output wire led_an_12, // Auto-Negotiation Status output wire led_char_err_12, // Character Error output wire led_disp_err_12, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_12, // Av-ST Receive Clock output wire mac_tx_clk_12, // Av-ST Transmit Clock output wire data_rx_sop_12, // Start of Packet output wire data_rx_eop_12, // End of Packet output wire [7:0] data_rx_data_12, // Data from FIFO output wire [4:0] data_rx_error_12, // Receive packet error output wire data_rx_valid_12, // Data Receive FIFO Valid input wire data_rx_ready_12, // Data Receive Ready output wire [4:0] pkt_class_data_12, // Frame Type Indication output wire pkt_class_valid_12, // Frame Type Indication Valid input wire data_tx_error_12, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_12, // Data from FIFO transmit input wire data_tx_valid_12, // Data FIFO transmit Empty input wire data_tx_sop_12, // Start of Packet input wire data_tx_eop_12, // END of Packet output wire data_tx_ready_12, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_12, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_12, // Forward Current Frame with CRC from Application input wire xoff_gen_12, // Xoff Pause frame generate input wire xon_gen_12, // Xon Pause frame generate input wire magic_sleep_n_12, // Enable Sleep Mode output wire magic_wakeup_12, // Wake Up Request // CHANNEL 13 // PCS SIGNALS TO PHY input wire tbi_rx_clk_13, // 125MHz Recoved Clock input wire tbi_tx_clk_13, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_13, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_13, // Transmit TBI Interface output wire sd_loopback_13, // SERDES Loopback Enable output wire powerdown_13, // Powerdown Enable output wire led_crs_13, // Carrier Sense output wire led_link_13, // Valid Link output wire led_col_13, // Collision Indication output wire led_an_13, // Auto-Negotiation Status output wire led_char_err_13, // Character Error output wire led_disp_err_13, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_13, // Av-ST Receive Clock output wire mac_tx_clk_13, // Av-ST Transmit Clock output wire data_rx_sop_13, // Start of Packet output wire data_rx_eop_13, // End of Packet output wire [7:0] data_rx_data_13, // Data from FIFO output wire [4:0] data_rx_error_13, // Receive packet error output wire data_rx_valid_13, // Data Receive FIFO Valid input wire data_rx_ready_13, // Data Receive Ready output wire [4:0] pkt_class_data_13, // Frame Type Indication output wire pkt_class_valid_13, // Frame Type Indication Valid input wire data_tx_error_13, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_13, // Data from FIFO transmit input wire data_tx_valid_13, // Data FIFO transmit Empty input wire data_tx_sop_13, // Start of Packet input wire data_tx_eop_13, // END of Packet output wire data_tx_ready_13, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_13, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_13, // Forward Current Frame with CRC from Application input wire xoff_gen_13, // Xoff Pause frame generate input wire xon_gen_13, // Xon Pause frame generate input wire magic_sleep_n_13, // Enable Sleep Mode output wire magic_wakeup_13, // Wake Up Request // CHANNEL 14 // PCS SIGNALS TO PHY input wire tbi_rx_clk_14, // 125MHz Recoved Clock input wire tbi_tx_clk_14, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_14, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_14, // Transmit TBI Interface output wire sd_loopback_14, // SERDES Loopback Enable output wire powerdown_14, // Powerdown Enable output wire led_crs_14, // Carrier Sense output wire led_link_14, // Valid Link output wire led_col_14, // Collision Indication output wire led_an_14, // Auto-Negotiation Status output wire led_char_err_14, // Character Error output wire led_disp_err_14, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_14, // Av-ST Receive Clock output wire mac_tx_clk_14, // Av-ST Transmit Clock output wire data_rx_sop_14, // Start of Packet output wire data_rx_eop_14, // End of Packet output wire [7:0] data_rx_data_14, // Data from FIFO output wire [4:0] data_rx_error_14, // Receive packet error output wire data_rx_valid_14, // Data Receive FIFO Valid input wire data_rx_ready_14, // Data Receive Ready output wire [4:0] pkt_class_data_14, // Frame Type Indication output wire pkt_class_valid_14, // Frame Type Indication Valid input wire data_tx_error_14, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_14, // Data from FIFO transmit input wire data_tx_valid_14, // Data FIFO transmit Empty input wire data_tx_sop_14, // Start of Packet input wire data_tx_eop_14, // END of Packet output wire data_tx_ready_14, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_14, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_14, // Forward Current Frame with CRC from Application input wire xoff_gen_14, // Xoff Pause frame generate input wire xon_gen_14, // Xon Pause frame generate input wire magic_sleep_n_14, // Enable Sleep Mode output wire magic_wakeup_14, // Wake Up Request // CHANNEL 15 // PCS SIGNALS TO PHY input wire tbi_rx_clk_15, // 125MHz Recoved Clock input wire tbi_tx_clk_15, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_15, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_15, // Transmit TBI Interface output wire sd_loopback_15, // SERDES Loopback Enable output wire powerdown_15, // Powerdown Enable output wire led_crs_15, // Carrier Sense output wire led_link_15, // Valid Link output wire led_col_15, // Collision Indication output wire led_an_15, // Auto-Negotiation Status output wire led_char_err_15, // Character Error output wire led_disp_err_15, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_15, // Av-ST Receive Clock output wire mac_tx_clk_15, // Av-ST Transmit Clock output wire data_rx_sop_15, // Start of Packet output wire data_rx_eop_15, // End of Packet output wire [7:0] data_rx_data_15, // Data from FIFO output wire [4:0] data_rx_error_15, // Receive packet error output wire data_rx_valid_15, // Data Receive FIFO Valid input wire data_rx_ready_15, // Data Receive Ready output wire [4:0] pkt_class_data_15, // Frame Type Indication output wire pkt_class_valid_15, // Frame Type Indication Valid input wire data_tx_error_15, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_15, // Data from FIFO transmit input wire data_tx_valid_15, // Data FIFO transmit Empty input wire data_tx_sop_15, // Start of Packet input wire data_tx_eop_15, // END of Packet output wire data_tx_ready_15, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_15, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_15, // Forward Current Frame with CRC from Application input wire xoff_gen_15, // Xoff Pause frame generate input wire xon_gen_15, // Xon Pause frame generate input wire magic_sleep_n_15, // Enable Sleep Mode output wire magic_wakeup_15, // Wake Up Request // CHANNEL 16 // PCS SIGNALS TO PHY input wire tbi_rx_clk_16, // 125MHz Recoved Clock input wire tbi_tx_clk_16, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_16, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_16, // Transmit TBI Interface output wire sd_loopback_16, // SERDES Loopback Enable output wire powerdown_16, // Powerdown Enable output wire led_crs_16, // Carrier Sense output wire led_link_16, // Valid Link output wire led_col_16, // Collision Indication output wire led_an_16, // Auto-Negotiation Status output wire led_char_err_16, // Character Error output wire led_disp_err_16, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_16, // Av-ST Receive Clock output wire mac_tx_clk_16, // Av-ST Transmit Clock output wire data_rx_sop_16, // Start of Packet output wire data_rx_eop_16, // End of Packet output wire [7:0] data_rx_data_16, // Data from FIFO output wire [4:0] data_rx_error_16, // Receive packet error output wire data_rx_valid_16, // Data Receive FIFO Valid input wire data_rx_ready_16, // Data Receive Ready output wire [4:0] pkt_class_data_16, // Frame Type Indication output wire pkt_class_valid_16, // Frame Type Indication Valid input wire data_tx_error_16, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_16, // Data from FIFO transmit input wire data_tx_valid_16, // Data FIFO transmit Empty input wire data_tx_sop_16, // Start of Packet input wire data_tx_eop_16, // END of Packet output wire data_tx_ready_16, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_16, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_16, // Forward Current Frame with CRC from Application input wire xoff_gen_16, // Xoff Pause frame generate input wire xon_gen_16, // Xon Pause frame generate input wire magic_sleep_n_16, // Enable Sleep Mode output wire magic_wakeup_16, // Wake Up Request // CHANNEL 17 // PCS SIGNALS TO PHY input wire tbi_rx_clk_17, // 125MHz Recoved Clock input wire tbi_tx_clk_17, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_17, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_17, // Transmit TBI Interface output wire sd_loopback_17, // SERDES Loopback Enable output wire powerdown_17, // Powerdown Enable output wire led_crs_17, // Carrier Sense output wire led_link_17, // Valid Link output wire led_col_17, // Collision Indication output wire led_an_17, // Auto-Negotiation Status output wire led_char_err_17, // Character Error output wire led_disp_err_17, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_17, // Av-ST Receive Clock output wire mac_tx_clk_17, // Av-ST Transmit Clock output wire data_rx_sop_17, // Start of Packet output wire data_rx_eop_17, // End of Packet output wire [7:0] data_rx_data_17, // Data from FIFO output wire [4:0] data_rx_error_17, // Receive packet error output wire data_rx_valid_17, // Data Receive FIFO Valid input wire data_rx_ready_17, // Data Receive Ready output wire [4:0] pkt_class_data_17, // Frame Type Indication output wire pkt_class_valid_17, // Frame Type Indication Valid input wire data_tx_error_17, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_17, // Data from FIFO transmit input wire data_tx_valid_17, // Data FIFO transmit Empty input wire data_tx_sop_17, // Start of Packet input wire data_tx_eop_17, // END of Packet output wire data_tx_ready_17, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_17, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_17, // Forward Current Frame with CRC from Application input wire xoff_gen_17, // Xoff Pause frame generate input wire xon_gen_17, // Xon Pause frame generate input wire magic_sleep_n_17, // Enable Sleep Mode output wire magic_wakeup_17, // Wake Up Request // CHANNEL 18 // PCS SIGNALS TO PHY input wire tbi_rx_clk_18, // 125MHz Recoved Clock input wire tbi_tx_clk_18, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_18, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_18, // Transmit TBI Interface output wire sd_loopback_18, // SERDES Loopback Enable output wire powerdown_18, // Powerdown Enable output wire led_crs_18, // Carrier Sense output wire led_link_18, // Valid Link output wire led_col_18, // Collision Indication output wire led_an_18, // Auto-Negotiation Status output wire led_char_err_18, // Character Error output wire led_disp_err_18, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_18, // Av-ST Receive Clock output wire mac_tx_clk_18, // Av-ST Transmit Clock output wire data_rx_sop_18, // Start of Packet output wire data_rx_eop_18, // End of Packet output wire [7:0] data_rx_data_18, // Data from FIFO output wire [4:0] data_rx_error_18, // Receive packet error output wire data_rx_valid_18, // Data Receive FIFO Valid input wire data_rx_ready_18, // Data Receive Ready output wire [4:0] pkt_class_data_18, // Frame Type Indication output wire pkt_class_valid_18, // Frame Type Indication Valid input wire data_tx_error_18, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_18, // Data from FIFO transmit input wire data_tx_valid_18, // Data FIFO transmit Empty input wire data_tx_sop_18, // Start of Packet input wire data_tx_eop_18, // END of Packet output wire data_tx_ready_18, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_18, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_18, // Forward Current Frame with CRC from Application input wire xoff_gen_18, // Xoff Pause frame generate input wire xon_gen_18, // Xon Pause frame generate input wire magic_sleep_n_18, // Enable Sleep Mode output wire magic_wakeup_18, // Wake Up Request // CHANNEL 19 // PCS SIGNALS TO PHY input wire tbi_rx_clk_19, // 125MHz Recoved Clock input wire tbi_tx_clk_19, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_19, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_19, // Transmit TBI Interface output wire sd_loopback_19, // SERDES Loopback Enable output wire powerdown_19, // Powerdown Enable output wire led_crs_19, // Carrier Sense output wire led_link_19, // Valid Link output wire led_col_19, // Collision Indication output wire led_an_19, // Auto-Negotiation Status output wire led_char_err_19, // Character Error output wire led_disp_err_19, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_19, // Av-ST Receive Clock output wire mac_tx_clk_19, // Av-ST Transmit Clock output wire data_rx_sop_19, // Start of Packet output wire data_rx_eop_19, // End of Packet output wire [7:0] data_rx_data_19, // Data from FIFO output wire [4:0] data_rx_error_19, // Receive packet error output wire data_rx_valid_19, // Data Receive FIFO Valid input wire data_rx_ready_19, // Data Receive Ready output wire [4:0] pkt_class_data_19, // Frame Type Indication output wire pkt_class_valid_19, // Frame Type Indication Valid input wire data_tx_error_19, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_19, // Data from FIFO transmit input wire data_tx_valid_19, // Data FIFO transmit Empty input wire data_tx_sop_19, // Start of Packet input wire data_tx_eop_19, // END of Packet output wire data_tx_ready_19, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_19, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_19, // Forward Current Frame with CRC from Application input wire xoff_gen_19, // Xoff Pause frame generate input wire xon_gen_19, // Xon Pause frame generate input wire magic_sleep_n_19, // Enable Sleep Mode output wire magic_wakeup_19, // Wake Up Request // CHANNEL 20 // PCS SIGNALS TO PHY input wire tbi_rx_clk_20, // 125MHz Recoved Clock input wire tbi_tx_clk_20, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_20, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_20, // Transmit TBI Interface output wire sd_loopback_20, // SERDES Loopback Enable output wire powerdown_20, // Powerdown Enable output wire led_crs_20, // Carrier Sense output wire led_link_20, // Valid Link output wire led_col_20, // Collision Indication output wire led_an_20, // Auto-Negotiation Status output wire led_char_err_20, // Character Error output wire led_disp_err_20, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_20, // Av-ST Receive Clock output wire mac_tx_clk_20, // Av-ST Transmit Clock output wire data_rx_sop_20, // Start of Packet output wire data_rx_eop_20, // End of Packet output wire [7:0] data_rx_data_20, // Data from FIFO output wire [4:0] data_rx_error_20, // Receive packet error output wire data_rx_valid_20, // Data Receive FIFO Valid input wire data_rx_ready_20, // Data Receive Ready output wire [4:0] pkt_class_data_20, // Frame Type Indication output wire pkt_class_valid_20, // Frame Type Indication Valid input wire data_tx_error_20, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_20, // Data from FIFO transmit input wire data_tx_valid_20, // Data FIFO transmit Empty input wire data_tx_sop_20, // Start of Packet input wire data_tx_eop_20, // END of Packet output wire data_tx_ready_20, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_20, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_20, // Forward Current Frame with CRC from Application input wire xoff_gen_20, // Xoff Pause frame generate input wire xon_gen_20, // Xon Pause frame generate input wire magic_sleep_n_20, // Enable Sleep Mode output wire magic_wakeup_20, // Wake Up Request // CHANNEL 21 // PCS SIGNALS TO PHY input wire tbi_rx_clk_21, // 125MHz Recoved Clock input wire tbi_tx_clk_21, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_21, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_21, // Transmit TBI Interface output wire sd_loopback_21, // SERDES Loopback Enable output wire powerdown_21, // Powerdown Enable output wire led_crs_21, // Carrier Sense output wire led_link_21, // Valid Link output wire led_col_21, // Collision Indication output wire led_an_21, // Auto-Negotiation Status output wire led_char_err_21, // Character Error output wire led_disp_err_21, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_21, // Av-ST Receive Clock output wire mac_tx_clk_21, // Av-ST Transmit Clock output wire data_rx_sop_21, // Start of Packet output wire data_rx_eop_21, // End of Packet output wire [7:0] data_rx_data_21, // Data from FIFO output wire [4:0] data_rx_error_21, // Receive packet error output wire data_rx_valid_21, // Data Receive FIFO Valid input wire data_rx_ready_21, // Data Receive Ready output wire [4:0] pkt_class_data_21, // Frame Type Indication output wire pkt_class_valid_21, // Frame Type Indication Valid input wire data_tx_error_21, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_21, // Data from FIFO transmit input wire data_tx_valid_21, // Data FIFO transmit Empty input wire data_tx_sop_21, // Start of Packet input wire data_tx_eop_21, // END of Packet output wire data_tx_ready_21, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_21, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_21, // Forward Current Frame with CRC from Application input wire xoff_gen_21, // Xoff Pause frame generate input wire xon_gen_21, // Xon Pause frame generate input wire magic_sleep_n_21, // Enable Sleep Mode output wire magic_wakeup_21, // Wake Up Request // CHANNEL 22 // PCS SIGNALS TO PHY input wire tbi_rx_clk_22, // 125MHz Recoved Clock input wire tbi_tx_clk_22, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_22, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_22, // Transmit TBI Interface output wire sd_loopback_22, // SERDES Loopback Enable output wire powerdown_22, // Powerdown Enable output wire led_crs_22, // Carrier Sense output wire led_link_22, // Valid Link output wire led_col_22, // Collision Indication output wire led_an_22, // Auto-Negotiation Status output wire led_char_err_22, // Character Error output wire led_disp_err_22, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_22, // Av-ST Receive Clock output wire mac_tx_clk_22, // Av-ST Transmit Clock output wire data_rx_sop_22, // Start of Packet output wire data_rx_eop_22, // End of Packet output wire [7:0] data_rx_data_22, // Data from FIFO output wire [4:0] data_rx_error_22, // Receive packet error output wire data_rx_valid_22, // Data Receive FIFO Valid input wire data_rx_ready_22, // Data Receive Ready output wire [4:0] pkt_class_data_22, // Frame Type Indication output wire pkt_class_valid_22, // Frame Type Indication Valid input wire data_tx_error_22, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_22, // Data from FIFO transmit input wire data_tx_valid_22, // Data FIFO transmit Empty input wire data_tx_sop_22, // Start of Packet input wire data_tx_eop_22, // END of Packet output wire data_tx_ready_22, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_22, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_22, // Forward Current Frame with CRC from Application input wire xoff_gen_22, // Xoff Pause frame generate input wire xon_gen_22, // Xon Pause frame generate input wire magic_sleep_n_22, // Enable Sleep Mode output wire magic_wakeup_22, // Wake Up Request // CHANNEL 23 // PCS SIGNALS TO PHY input wire tbi_rx_clk_23, // 125MHz Recoved Clock input wire tbi_tx_clk_23, // 125MHz Transmit Clock input wire [9:0] tbi_rx_d_23, // Non Aligned 10-Bit Characters output wire [9:0] tbi_tx_d_23, // Transmit TBI Interface output wire sd_loopback_23, // SERDES Loopback Enable output wire powerdown_23, // Powerdown Enable output wire led_crs_23, // Carrier Sense output wire led_link_23, // Valid Link output wire led_col_23, // Collision Indication output wire led_an_23, // Auto-Negotiation Status output wire led_char_err_23, // Character Error output wire led_disp_err_23, // Disparity Error // AV-ST TX & RX output wire mac_rx_clk_23, // Av-ST Receive Clock output wire mac_tx_clk_23, // Av-ST Transmit Clock output wire data_rx_sop_23, // Start of Packet output wire data_rx_eop_23, // End of Packet output wire [7:0] data_rx_data_23, // Data from FIFO output wire [4:0] data_rx_error_23, // Receive packet error output wire data_rx_valid_23, // Data Receive FIFO Valid input wire data_rx_ready_23, // Data Receive Ready output wire [4:0] pkt_class_data_23, // Frame Type Indication output wire pkt_class_valid_23, // Frame Type Indication Valid input wire data_tx_error_23, // STATUS FIFO (Tx frame Error from Apps) input wire [7:0] data_tx_data_23, // Data from FIFO transmit input wire data_tx_valid_23, // Data FIFO transmit Empty input wire data_tx_sop_23, // Start of Packet input wire data_tx_eop_23, // END of Packet output wire data_tx_ready_23, // Data FIFO transmit Read Enable // STAND_ALONE CONDUITS output wire tx_ff_uflow_23, // TX FIFO underflow occured (Synchronous with tx_clk) input wire tx_crc_fwd_23, // Forward Current Frame with CRC from Application input wire xoff_gen_23, // Xoff Pause frame generate input wire xon_gen_23, // Xon Pause frame generate input wire magic_sleep_n_23, // Enable Sleep Mode output wire magic_wakeup_23); // Wake Up Request // Component instantiation altera_tse_top_multi_mac_pcs U_MULTI_MAC_PCS( .reset(reset), //INPUT : ASYNCHRONOUS RESET - clk DOMAIN .clk(clk), //INPUT : CLOCK .read(read), //INPUT : REGISTER READ TRANSACTION .write(write), //INPUT : REGISTER WRITE TRANSACTION .ref_clk(ref_clk), //INPUT : REFERENCE CLOCK .address(address), //INPUT : REGISTER ADDRESS .writedata(writedata), //INPUT : REGISTER WRITE DATA .readdata(readdata), //OUTPUT : REGISTER READ DATA .waitrequest(waitrequest), //OUTPUT : TRANSACTION BUSY, ACTIVE LOW .mdc(mdc), //OUTPUT : MDIO Clock .mdio_out(mdio_out), //OUTPUT : Outgoing MDIO DATA .mdio_in(mdio_in), //INPUT : Incoming MDIO DATA .mdio_oen(mdio_oen), //OUTPUT : MDIO Output Enable .mac_rx_clk(mac_rx_clk), //OUTPUT : Av-ST Rx Clock .mac_tx_clk(mac_tx_clk), //OUTPUT : Av-ST Tx Clock .rx_afull_clk(rx_afull_clk), //INPUT : AFull Status Clock .rx_afull_data(rx_afull_data), //INPUT : AFull Status Data .rx_afull_valid(rx_afull_valid), //INPUT : AFull Status Valid .rx_afull_channel(rx_afull_channel), //INPUT : AFull Status Channel // Channel 0 .tbi_rx_clk_0(tbi_rx_clk_0), //INPUT : Receive TBI Clock .tbi_tx_clk_0(tbi_tx_clk_0), //INPUT : Transmit TBI Clock .tbi_rx_d_0(tbi_rx_d_0), //INPUT : Receive TBI Interface .tbi_tx_d_0(tbi_tx_d_0), //OUTPUT : Transmit TBI Interface .sd_loopback_0(sd_loopback_0), //OUTPUT : SERDES Loopback Enable .powerdown_0(powerdown_0), //OUTPUT : Powerdown Enable .led_col_0(led_col_0), //OUTPUT : Collision Indication .led_an_0(led_an_0), //OUTPUT : Auto Negotiation Status .led_char_err_0(led_char_err_0), //OUTPUT : Character error .led_disp_err_0(led_disp_err_0), //OUTPUT : Disparity error .led_crs_0(led_crs_0), //OUTPUT : Carrier sense .led_link_0(led_link_0), //OUTPUT : Valid link .mac_rx_clk_0(mac_rx_clk_0), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_0(mac_tx_clk_0), //OUTPUT : Av-ST Tx Clock .data_rx_sop_0(data_rx_sop_0), //OUTPUT : Start of Packet .data_rx_eop_0(data_rx_eop_0), //OUTPUT : End of Packet .data_rx_data_0(data_rx_data_0), //OUTPUT : Data from FIFO .data_rx_error_0(data_rx_error_0), //OUTPUT : Receive packet error .data_rx_valid_0(data_rx_valid_0), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_0(data_rx_ready_0), //OUTPUT : Data Receive Ready .pkt_class_data_0(pkt_class_data_0), //OUTPUT : Frame Type Indication .pkt_class_valid_0(pkt_class_valid_0), //OUTPUT : Frame Type Indication Valid .data_tx_error_0(data_tx_error_0), //INPUT : Status .data_tx_data_0(data_tx_data_0), //INPUT : Data from FIFO transmit .data_tx_valid_0(data_tx_valid_0), //INPUT : Data FIFO transmit Empty .data_tx_sop_0(data_tx_sop_0), //INPUT : Start of Packet .data_tx_eop_0(data_tx_eop_0), //INPUT : End of Packet .data_tx_ready_0(data_tx_ready_0), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_0(tx_ff_uflow_0), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_0(tx_crc_fwd_0), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_0(xoff_gen_0), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_0(xon_gen_0), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_0(magic_sleep_n_0), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_0(magic_wakeup_0), //OUTPUT : MAC WAKE-UP INDICATION // Channel 1 .tbi_rx_clk_1(tbi_rx_clk_1), //INPUT : Receive TBI Clock .tbi_tx_clk_1(tbi_tx_clk_1), //INPUT : Transmit TBI Clock .tbi_rx_d_1(tbi_rx_d_1), //INPUT : Receive TBI Interface .tbi_tx_d_1(tbi_tx_d_1), //OUTPUT : Transmit TBI Interface .sd_loopback_1(sd_loopback_1), //OUTPUT : SERDES Loopback Enable .powerdown_1(powerdown_1), //OUTPUT : Powerdown Enable .led_col_1(led_col_1), //OUTPUT : Collision Indication .led_an_1(led_an_1), //OUTPUT : Auto Negotiation Status .led_char_err_1(led_char_err_1), //OUTPUT : Character error .led_disp_err_1(led_disp_err_1), //OUTPUT : Disparity error .led_crs_1(led_crs_1), //OUTPUT : Carrier sense .led_link_1(led_link_1), //OUTPUT : Valid link .mac_rx_clk_1(mac_rx_clk_1), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_1(mac_tx_clk_1), //OUTPUT : Av-ST Tx Clock .data_rx_sop_1(data_rx_sop_1), //OUTPUT : Start of Packet .data_rx_eop_1(data_rx_eop_1), //OUTPUT : End of Packet .data_rx_data_1(data_rx_data_1), //OUTPUT : Data from FIFO .data_rx_error_1(data_rx_error_1), //OUTPUT : Receive packet error .data_rx_valid_1(data_rx_valid_1), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_1(data_rx_ready_1), //OUTPUT : Data Receive Ready .pkt_class_data_1(pkt_class_data_1), //OUTPUT : Frame Type Indication .pkt_class_valid_1(pkt_class_valid_1), //OUTPUT : Frame Type Indication Valid .data_tx_error_1(data_tx_error_1), //INPUT : Status .data_tx_data_1(data_tx_data_1), //INPUT : Data from FIFO transmit .data_tx_valid_1(data_tx_valid_1), //INPUT : Data FIFO transmit Empty .data_tx_sop_1(data_tx_sop_1), //INPUT : Start of Packet .data_tx_eop_1(data_tx_eop_1), //INPUT : End of Packet .data_tx_ready_1(data_tx_ready_1), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_1(tx_ff_uflow_1), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_1(tx_crc_fwd_1), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_1(xoff_gen_1), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_1(xon_gen_1), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_1(magic_sleep_n_1), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_1(magic_wakeup_1), //OUTPUT : MAC WAKE-UP INDICATION // Channel 2 .tbi_rx_clk_2(tbi_rx_clk_2), //INPUT : Receive TBI Clock .tbi_tx_clk_2(tbi_tx_clk_2), //INPUT : Transmit TBI Clock .tbi_rx_d_2(tbi_rx_d_2), //INPUT : Receive TBI Interface .tbi_tx_d_2(tbi_tx_d_2), //OUTPUT : Transmit TBI Interface .sd_loopback_2(sd_loopback_2), //OUTPUT : SERDES Loopback Enable .powerdown_2(powerdown_2), //OUTPUT : Powerdown Enable .led_col_2(led_col_2), //OUTPUT : Collision Indication .led_an_2(led_an_2), //OUTPUT : Auto Negotiation Status .led_char_err_2(led_char_err_2), //OUTPUT : Character error .led_disp_err_2(led_disp_err_2), //OUTPUT : Disparity error .led_crs_2(led_crs_2), //OUTPUT : Carrier sense .led_link_2(led_link_2), //OUTPUT : Valid link .mac_rx_clk_2(mac_rx_clk_2), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_2(mac_tx_clk_2), //OUTPUT : Av-ST Tx Clock .data_rx_sop_2(data_rx_sop_2), //OUTPUT : Start of Packet .data_rx_eop_2(data_rx_eop_2), //OUTPUT : End of Packet .data_rx_data_2(data_rx_data_2), //OUTPUT : Data from FIFO .data_rx_error_2(data_rx_error_2), //OUTPUT : Receive packet error .data_rx_valid_2(data_rx_valid_2), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_2(data_rx_ready_2), //OUTPUT : Data Receive Ready .pkt_class_data_2(pkt_class_data_2), //OUTPUT : Frame Type Indication .pkt_class_valid_2(pkt_class_valid_2), //OUTPUT : Frame Type Indication Valid .data_tx_error_2(data_tx_error_2), //INPUT : Status .data_tx_data_2(data_tx_data_2), //INPUT : Data from FIFO transmit .data_tx_valid_2(data_tx_valid_2), //INPUT : Data FIFO transmit Empty .data_tx_sop_2(data_tx_sop_2), //INPUT : Start of Packet .data_tx_eop_2(data_tx_eop_2), //INPUT : End of Packet .data_tx_ready_2(data_tx_ready_2), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_2(tx_ff_uflow_2), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_2(tx_crc_fwd_2), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_2(xoff_gen_2), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_2(xon_gen_2), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_2(magic_sleep_n_2), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_2(magic_wakeup_2), //OUTPUT : MAC WAKE-UP INDICATION // Channel 3 .tbi_rx_clk_3(tbi_rx_clk_3), //INPUT : Receive TBI Clock .tbi_tx_clk_3(tbi_tx_clk_3), //INPUT : Transmit TBI Clock .tbi_rx_d_3(tbi_rx_d_3), //INPUT : Receive TBI Interface .tbi_tx_d_3(tbi_tx_d_3), //OUTPUT : Transmit TBI Interface .sd_loopback_3(sd_loopback_3), //OUTPUT : SERDES Loopback Enable .powerdown_3(powerdown_3), //OUTPUT : Powerdown Enable .led_col_3(led_col_3), //OUTPUT : Collision Indication .led_an_3(led_an_3), //OUTPUT : Auto Negotiation Status .led_char_err_3(led_char_err_3), //OUTPUT : Character error .led_disp_err_3(led_disp_err_3), //OUTPUT : Disparity error .led_crs_3(led_crs_3), //OUTPUT : Carrier sense .led_link_3(led_link_3), //OUTPUT : Valid link .mac_rx_clk_3(mac_rx_clk_3), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_3(mac_tx_clk_3), //OUTPUT : Av-ST Tx Clock .data_rx_sop_3(data_rx_sop_3), //OUTPUT : Start of Packet .data_rx_eop_3(data_rx_eop_3), //OUTPUT : End of Packet .data_rx_data_3(data_rx_data_3), //OUTPUT : Data from FIFO .data_rx_error_3(data_rx_error_3), //OUTPUT : Receive packet error .data_rx_valid_3(data_rx_valid_3), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_3(data_rx_ready_3), //OUTPUT : Data Receive Ready .pkt_class_data_3(pkt_class_data_3), //OUTPUT : Frame Type Indication .pkt_class_valid_3(pkt_class_valid_3), //OUTPUT : Frame Type Indication Valid .data_tx_error_3(data_tx_error_3), //INPUT : Status .data_tx_data_3(data_tx_data_3), //INPUT : Data from FIFO transmit .data_tx_valid_3(data_tx_valid_3), //INPUT : Data FIFO transmit Empty .data_tx_sop_3(data_tx_sop_3), //INPUT : Start of Packet .data_tx_eop_3(data_tx_eop_3), //INPUT : End of Packet .data_tx_ready_3(data_tx_ready_3), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_3(tx_ff_uflow_3), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_3(tx_crc_fwd_3), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_3(xoff_gen_3), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_3(xon_gen_3), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_3(magic_sleep_n_3), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_3(magic_wakeup_3), //OUTPUT : MAC WAKE-UP INDICATION // Channel 4 .tbi_rx_clk_4(tbi_rx_clk_4), //INPUT : Receive TBI Clock .tbi_tx_clk_4(tbi_tx_clk_4), //INPUT : Transmit TBI Clock .tbi_rx_d_4(tbi_rx_d_4), //INPUT : Receive TBI Interface .tbi_tx_d_4(tbi_tx_d_4), //OUTPUT : Transmit TBI Interface .sd_loopback_4(sd_loopback_4), //OUTPUT : SERDES Loopback Enable .powerdown_4(powerdown_4), //OUTPUT : Powerdown Enable .led_col_4(led_col_4), //OUTPUT : Collision Indication .led_an_4(led_an_4), //OUTPUT : Auto Negotiation Status .led_char_err_4(led_char_err_4), //OUTPUT : Character error .led_disp_err_4(led_disp_err_4), //OUTPUT : Disparity error .led_crs_4(led_crs_4), //OUTPUT : Carrier sense .led_link_4(led_link_4), //OUTPUT : Valid link .mac_rx_clk_4(mac_rx_clk_4), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_4(mac_tx_clk_4), //OUTPUT : Av-ST Tx Clock .data_rx_sop_4(data_rx_sop_4), //OUTPUT : Start of Packet .data_rx_eop_4(data_rx_eop_4), //OUTPUT : End of Packet .data_rx_data_4(data_rx_data_4), //OUTPUT : Data from FIFO .data_rx_error_4(data_rx_error_4), //OUTPUT : Receive packet error .data_rx_valid_4(data_rx_valid_4), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_4(data_rx_ready_4), //OUTPUT : Data Receive Ready .pkt_class_data_4(pkt_class_data_4), //OUTPUT : Frame Type Indication .pkt_class_valid_4(pkt_class_valid_4), //OUTPUT : Frame Type Indication Valid .data_tx_error_4(data_tx_error_4), //INPUT : Status .data_tx_data_4(data_tx_data_4), //INPUT : Data from FIFO transmit .data_tx_valid_4(data_tx_valid_4), //INPUT : Data FIFO transmit Empty .data_tx_sop_4(data_tx_sop_4), //INPUT : Start of Packet .data_tx_eop_4(data_tx_eop_4), //INPUT : End of Packet .data_tx_ready_4(data_tx_ready_4), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_4(tx_ff_uflow_4), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_4(tx_crc_fwd_4), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_4(xoff_gen_4), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_4(xon_gen_4), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_4(magic_sleep_n_4), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_4(magic_wakeup_4), //OUTPUT : MAC WAKE-UP INDICATION // Channel 5 .tbi_rx_clk_5(tbi_rx_clk_5), //INPUT : Receive TBI Clock .tbi_tx_clk_5(tbi_tx_clk_5), //INPUT : Transmit TBI Clock .tbi_rx_d_5(tbi_rx_d_5), //INPUT : Receive TBI Interface .tbi_tx_d_5(tbi_tx_d_5), //OUTPUT : Transmit TBI Interface .sd_loopback_5(sd_loopback_5), //OUTPUT : SERDES Loopback Enable .powerdown_5(powerdown_5), //OUTPUT : Powerdown Enable .led_col_5(led_col_5), //OUTPUT : Collision Indication .led_an_5(led_an_5), //OUTPUT : Auto Negotiation Status .led_char_err_5(led_char_err_5), //OUTPUT : Character error .led_disp_err_5(led_disp_err_5), //OUTPUT : Disparity error .led_crs_5(led_crs_5), //OUTPUT : Carrier sense .led_link_5(led_link_5), //OUTPUT : Valid link .mac_rx_clk_5(mac_rx_clk_5), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_5(mac_tx_clk_5), //OUTPUT : Av-ST Tx Clock .data_rx_sop_5(data_rx_sop_5), //OUTPUT : Start of Packet .data_rx_eop_5(data_rx_eop_5), //OUTPUT : End of Packet .data_rx_data_5(data_rx_data_5), //OUTPUT : Data from FIFO .data_rx_error_5(data_rx_error_5), //OUTPUT : Receive packet error .data_rx_valid_5(data_rx_valid_5), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_5(data_rx_ready_5), //OUTPUT : Data Receive Ready .pkt_class_data_5(pkt_class_data_5), //OUTPUT : Frame Type Indication .pkt_class_valid_5(pkt_class_valid_5), //OUTPUT : Frame Type Indication Valid .data_tx_error_5(data_tx_error_5), //INPUT : Status .data_tx_data_5(data_tx_data_5), //INPUT : Data from FIFO transmit .data_tx_valid_5(data_tx_valid_5), //INPUT : Data FIFO transmit Empty .data_tx_sop_5(data_tx_sop_5), //INPUT : Start of Packet .data_tx_eop_5(data_tx_eop_5), //INPUT : End of Packet .data_tx_ready_5(data_tx_ready_5), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_5(tx_ff_uflow_5), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_5(tx_crc_fwd_5), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_5(xoff_gen_5), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_5(xon_gen_5), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_5(magic_sleep_n_5), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_5(magic_wakeup_5), //OUTPUT : MAC WAKE-UP INDICATION // Channel 6 .tbi_rx_clk_6(tbi_rx_clk_6), //INPUT : Receive TBI Clock .tbi_tx_clk_6(tbi_tx_clk_6), //INPUT : Transmit TBI Clock .tbi_rx_d_6(tbi_rx_d_6), //INPUT : Receive TBI Interface .tbi_tx_d_6(tbi_tx_d_6), //OUTPUT : Transmit TBI Interface .sd_loopback_6(sd_loopback_6), //OUTPUT : SERDES Loopback Enable .powerdown_6(powerdown_6), //OUTPUT : Powerdown Enable .led_col_6(led_col_6), //OUTPUT : Collision Indication .led_an_6(led_an_6), //OUTPUT : Auto Negotiation Status .led_char_err_6(led_char_err_6), //OUTPUT : Character error .led_disp_err_6(led_disp_err_6), //OUTPUT : Disparity error .led_crs_6(led_crs_6), //OUTPUT : Carrier sense .led_link_6(led_link_6), //OUTPUT : Valid link .mac_rx_clk_6(mac_rx_clk_6), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_6(mac_tx_clk_6), //OUTPUT : Av-ST Tx Clock .data_rx_sop_6(data_rx_sop_6), //OUTPUT : Start of Packet .data_rx_eop_6(data_rx_eop_6), //OUTPUT : End of Packet .data_rx_data_6(data_rx_data_6), //OUTPUT : Data from FIFO .data_rx_error_6(data_rx_error_6), //OUTPUT : Receive packet error .data_rx_valid_6(data_rx_valid_6), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_6(data_rx_ready_6), //OUTPUT : Data Receive Ready .pkt_class_data_6(pkt_class_data_6), //OUTPUT : Frame Type Indication .pkt_class_valid_6(pkt_class_valid_6), //OUTPUT : Frame Type Indication Valid .data_tx_error_6(data_tx_error_6), //INPUT : Status .data_tx_data_6(data_tx_data_6), //INPUT : Data from FIFO transmit .data_tx_valid_6(data_tx_valid_6), //INPUT : Data FIFO transmit Empty .data_tx_sop_6(data_tx_sop_6), //INPUT : Start of Packet .data_tx_eop_6(data_tx_eop_6), //INPUT : End of Packet .data_tx_ready_6(data_tx_ready_6), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_6(tx_ff_uflow_6), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_6(tx_crc_fwd_6), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_6(xoff_gen_6), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_6(xon_gen_6), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_6(magic_sleep_n_6), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_6(magic_wakeup_6), //OUTPUT : MAC WAKE-UP INDICATION // Channel 7 .tbi_rx_clk_7(tbi_rx_clk_7), //INPUT : Receive TBI Clock .tbi_tx_clk_7(tbi_tx_clk_7), //INPUT : Transmit TBI Clock .tbi_rx_d_7(tbi_rx_d_7), //INPUT : Receive TBI Interface .tbi_tx_d_7(tbi_tx_d_7), //OUTPUT : Transmit TBI Interface .sd_loopback_7(sd_loopback_7), //OUTPUT : SERDES Loopback Enable .powerdown_7(powerdown_7), //OUTPUT : Powerdown Enable .led_col_7(led_col_7), //OUTPUT : Collision Indication .led_an_7(led_an_7), //OUTPUT : Auto Negotiation Status .led_char_err_7(led_char_err_7), //OUTPUT : Character error .led_disp_err_7(led_disp_err_7), //OUTPUT : Disparity error .led_crs_7(led_crs_7), //OUTPUT : Carrier sense .led_link_7(led_link_7), //OUTPUT : Valid link .mac_rx_clk_7(mac_rx_clk_7), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_7(mac_tx_clk_7), //OUTPUT : Av-ST Tx Clock .data_rx_sop_7(data_rx_sop_7), //OUTPUT : Start of Packet .data_rx_eop_7(data_rx_eop_7), //OUTPUT : End of Packet .data_rx_data_7(data_rx_data_7), //OUTPUT : Data from FIFO .data_rx_error_7(data_rx_error_7), //OUTPUT : Receive packet error .data_rx_valid_7(data_rx_valid_7), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_7(data_rx_ready_7), //OUTPUT : Data Receive Ready .pkt_class_data_7(pkt_class_data_7), //OUTPUT : Frame Type Indication .pkt_class_valid_7(pkt_class_valid_7), //OUTPUT : Frame Type Indication Valid .data_tx_error_7(data_tx_error_7), //INPUT : Status .data_tx_data_7(data_tx_data_7), //INPUT : Data from FIFO transmit .data_tx_valid_7(data_tx_valid_7), //INPUT : Data FIFO transmit Empty .data_tx_sop_7(data_tx_sop_7), //INPUT : Start of Packet .data_tx_eop_7(data_tx_eop_7), //INPUT : End of Packet .data_tx_ready_7(data_tx_ready_7), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_7(tx_ff_uflow_7), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_7(tx_crc_fwd_7), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_7(xoff_gen_7), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_7(xon_gen_7), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_7(magic_sleep_n_7), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_7(magic_wakeup_7), //OUTPUT : MAC WAKE-UP INDICATION // Channel 8 .tbi_rx_clk_8(tbi_rx_clk_8), //INPUT : Receive TBI Clock .tbi_tx_clk_8(tbi_tx_clk_8), //INPUT : Transmit TBI Clock .tbi_rx_d_8(tbi_rx_d_8), //INPUT : Receive TBI Interface .tbi_tx_d_8(tbi_tx_d_8), //OUTPUT : Transmit TBI Interface .sd_loopback_8(sd_loopback_8), //OUTPUT : SERDES Loopback Enable .powerdown_8(powerdown_8), //OUTPUT : Powerdown Enable .led_col_8(led_col_8), //OUTPUT : Collision Indication .led_an_8(led_an_8), //OUTPUT : Auto Negotiation Status .led_char_err_8(led_char_err_8), //OUTPUT : Character error .led_disp_err_8(led_disp_err_8), //OUTPUT : Disparity error .led_crs_8(led_crs_8), //OUTPUT : Carrier sense .led_link_8(led_link_8), //OUTPUT : Valid link .mac_rx_clk_8(mac_rx_clk_8), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_8(mac_tx_clk_8), //OUTPUT : Av-ST Tx Clock .data_rx_sop_8(data_rx_sop_8), //OUTPUT : Start of Packet .data_rx_eop_8(data_rx_eop_8), //OUTPUT : End of Packet .data_rx_data_8(data_rx_data_8), //OUTPUT : Data from FIFO .data_rx_error_8(data_rx_error_8), //OUTPUT : Receive packet error .data_rx_valid_8(data_rx_valid_8), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_8(data_rx_ready_8), //OUTPUT : Data Receive Ready .pkt_class_data_8(pkt_class_data_8), //OUTPUT : Frame Type Indication .pkt_class_valid_8(pkt_class_valid_8), //OUTPUT : Frame Type Indication Valid .data_tx_error_8(data_tx_error_8), //INPUT : Status .data_tx_data_8(data_tx_data_8), //INPUT : Data from FIFO transmit .data_tx_valid_8(data_tx_valid_8), //INPUT : Data FIFO transmit Empty .data_tx_sop_8(data_tx_sop_8), //INPUT : Start of Packet .data_tx_eop_8(data_tx_eop_8), //INPUT : End of Packet .data_tx_ready_8(data_tx_ready_8), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_8(tx_ff_uflow_8), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_8(tx_crc_fwd_8), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_8(xoff_gen_8), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_8(xon_gen_8), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_8(magic_sleep_n_8), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_8(magic_wakeup_8), //OUTPUT : MAC WAKE-UP INDICATION // Channel 9 .tbi_rx_clk_9(tbi_rx_clk_9), //INPUT : Receive TBI Clock .tbi_tx_clk_9(tbi_tx_clk_9), //INPUT : Transmit TBI Clock .tbi_rx_d_9(tbi_rx_d_9), //INPUT : Receive TBI Interface .tbi_tx_d_9(tbi_tx_d_9), //OUTPUT : Transmit TBI Interface .sd_loopback_9(sd_loopback_9), //OUTPUT : SERDES Loopback Enable .powerdown_9(powerdown_9), //OUTPUT : Powerdown Enable .led_col_9(led_col_9), //OUTPUT : Collision Indication .led_an_9(led_an_9), //OUTPUT : Auto Negotiation Status .led_char_err_9(led_char_err_9), //OUTPUT : Character error .led_disp_err_9(led_disp_err_9), //OUTPUT : Disparity error .led_crs_9(led_crs_9), //OUTPUT : Carrier sense .led_link_9(led_link_9), //OUTPUT : Valid link .mac_rx_clk_9(mac_rx_clk_9), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_9(mac_tx_clk_9), //OUTPUT : Av-ST Tx Clock .data_rx_sop_9(data_rx_sop_9), //OUTPUT : Start of Packet .data_rx_eop_9(data_rx_eop_9), //OUTPUT : End of Packet .data_rx_data_9(data_rx_data_9), //OUTPUT : Data from FIFO .data_rx_error_9(data_rx_error_9), //OUTPUT : Receive packet error .data_rx_valid_9(data_rx_valid_9), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_9(data_rx_ready_9), //OUTPUT : Data Receive Ready .pkt_class_data_9(pkt_class_data_9), //OUTPUT : Frame Type Indication .pkt_class_valid_9(pkt_class_valid_9), //OUTPUT : Frame Type Indication Valid .data_tx_error_9(data_tx_error_9), //INPUT : Status .data_tx_data_9(data_tx_data_9), //INPUT : Data from FIFO transmit .data_tx_valid_9(data_tx_valid_9), //INPUT : Data FIFO transmit Empty .data_tx_sop_9(data_tx_sop_9), //INPUT : Start of Packet .data_tx_eop_9(data_tx_eop_9), //INPUT : End of Packet .data_tx_ready_9(data_tx_ready_9), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_9(tx_ff_uflow_9), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_9(tx_crc_fwd_9), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_9(xoff_gen_9), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_9(xon_gen_9), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_9(magic_sleep_n_9), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_9(magic_wakeup_9), //OUTPUT : MAC WAKE-UP INDICATION // Channel 10 .tbi_rx_clk_10(tbi_rx_clk_10), //INPUT : Receive TBI Clock .tbi_tx_clk_10(tbi_tx_clk_10), //INPUT : Transmit TBI Clock .tbi_rx_d_10(tbi_rx_d_10), //INPUT : Receive TBI Interface .tbi_tx_d_10(tbi_tx_d_10), //OUTPUT : Transmit TBI Interface .sd_loopback_10(sd_loopback_10), //OUTPUT : SERDES Loopback Enable .powerdown_10(powerdown_10), //OUTPUT : Powerdown Enable .led_col_10(led_col_10), //OUTPUT : Collision Indication .led_an_10(led_an_10), //OUTPUT : Auto Negotiation Status .led_char_err_10(led_char_err_10), //OUTPUT : Character error .led_disp_err_10(led_disp_err_10), //OUTPUT : Disparity error .led_crs_10(led_crs_10), //OUTPUT : Carrier sense .led_link_10(led_link_10), //OUTPUT : Valid link .mac_rx_clk_10(mac_rx_clk_10), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_10(mac_tx_clk_10), //OUTPUT : Av-ST Tx Clock .data_rx_sop_10(data_rx_sop_10), //OUTPUT : Start of Packet .data_rx_eop_10(data_rx_eop_10), //OUTPUT : End of Packet .data_rx_data_10(data_rx_data_10), //OUTPUT : Data from FIFO .data_rx_error_10(data_rx_error_10), //OUTPUT : Receive packet error .data_rx_valid_10(data_rx_valid_10), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_10(data_rx_ready_10), //OUTPUT : Data Receive Ready .pkt_class_data_10(pkt_class_data_10), //OUTPUT : Frame Type Indication .pkt_class_valid_10(pkt_class_valid_10), //OUTPUT : Frame Type Indication Valid .data_tx_error_10(data_tx_error_10), //INPUT : Status .data_tx_data_10(data_tx_data_10), //INPUT : Data from FIFO transmit .data_tx_valid_10(data_tx_valid_10), //INPUT : Data FIFO transmit Empty .data_tx_sop_10(data_tx_sop_10), //INPUT : Start of Packet .data_tx_eop_10(data_tx_eop_10), //INPUT : End of Packet .data_tx_ready_10(data_tx_ready_10), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_10(tx_ff_uflow_10), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_10(tx_crc_fwd_10), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_10(xoff_gen_10), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_10(xon_gen_10), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_10(magic_sleep_n_10), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_10(magic_wakeup_10), //OUTPUT : MAC WAKE-UP INDICATION // Channel 11 .tbi_rx_clk_11(tbi_rx_clk_11), //INPUT : Receive TBI Clock .tbi_tx_clk_11(tbi_tx_clk_11), //INPUT : Transmit TBI Clock .tbi_rx_d_11(tbi_rx_d_11), //INPUT : Receive TBI Interface .tbi_tx_d_11(tbi_tx_d_11), //OUTPUT : Transmit TBI Interface .sd_loopback_11(sd_loopback_11), //OUTPUT : SERDES Loopback Enable .powerdown_11(powerdown_11), //OUTPUT : Powerdown Enable .led_col_11(led_col_11), //OUTPUT : Collision Indication .led_an_11(led_an_11), //OUTPUT : Auto Negotiation Status .led_char_err_11(led_char_err_11), //OUTPUT : Character error .led_disp_err_11(led_disp_err_11), //OUTPUT : Disparity error .led_crs_11(led_crs_11), //OUTPUT : Carrier sense .led_link_11(led_link_11), //OUTPUT : Valid link .mac_rx_clk_11(mac_rx_clk_11), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_11(mac_tx_clk_11), //OUTPUT : Av-ST Tx Clock .data_rx_sop_11(data_rx_sop_11), //OUTPUT : Start of Packet .data_rx_eop_11(data_rx_eop_11), //OUTPUT : End of Packet .data_rx_data_11(data_rx_data_11), //OUTPUT : Data from FIFO .data_rx_error_11(data_rx_error_11), //OUTPUT : Receive packet error .data_rx_valid_11(data_rx_valid_11), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_11(data_rx_ready_11), //OUTPUT : Data Receive Ready .pkt_class_data_11(pkt_class_data_11), //OUTPUT : Frame Type Indication .pkt_class_valid_11(pkt_class_valid_11), //OUTPUT : Frame Type Indication Valid .data_tx_error_11(data_tx_error_11), //INPUT : Status .data_tx_data_11(data_tx_data_11), //INPUT : Data from FIFO transmit .data_tx_valid_11(data_tx_valid_11), //INPUT : Data FIFO transmit Empty .data_tx_sop_11(data_tx_sop_11), //INPUT : Start of Packet .data_tx_eop_11(data_tx_eop_11), //INPUT : End of Packet .data_tx_ready_11(data_tx_ready_11), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_11(tx_ff_uflow_11), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_11(tx_crc_fwd_11), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_11(xoff_gen_11), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_11(xon_gen_11), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_11(magic_sleep_n_11), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_11(magic_wakeup_11), //OUTPUT : MAC WAKE-UP INDICATION // Channel 12 .tbi_rx_clk_12(tbi_rx_clk_12), //INPUT : Receive TBI Clock .tbi_tx_clk_12(tbi_tx_clk_12), //INPUT : Transmit TBI Clock .tbi_rx_d_12(tbi_rx_d_12), //INPUT : Receive TBI Interface .tbi_tx_d_12(tbi_tx_d_12), //OUTPUT : Transmit TBI Interface .sd_loopback_12(sd_loopback_12), //OUTPUT : SERDES Loopback Enable .powerdown_12(powerdown_12), //OUTPUT : Powerdown Enable .led_col_12(led_col_12), //OUTPUT : Collision Indication .led_an_12(led_an_12), //OUTPUT : Auto Negotiation Status .led_char_err_12(led_char_err_12), //OUTPUT : Character error .led_disp_err_12(led_disp_err_12), //OUTPUT : Disparity error .led_crs_12(led_crs_12), //OUTPUT : Carrier sense .led_link_12(led_link_12), //OUTPUT : Valid link .mac_rx_clk_12(mac_rx_clk_12), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_12(mac_tx_clk_12), //OUTPUT : Av-ST Tx Clock .data_rx_sop_12(data_rx_sop_12), //OUTPUT : Start of Packet .data_rx_eop_12(data_rx_eop_12), //OUTPUT : End of Packet .data_rx_data_12(data_rx_data_12), //OUTPUT : Data from FIFO .data_rx_error_12(data_rx_error_12), //OUTPUT : Receive packet error .data_rx_valid_12(data_rx_valid_12), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_12(data_rx_ready_12), //OUTPUT : Data Receive Ready .pkt_class_data_12(pkt_class_data_12), //OUTPUT : Frame Type Indication .pkt_class_valid_12(pkt_class_valid_12), //OUTPUT : Frame Type Indication Valid .data_tx_error_12(data_tx_error_12), //INPUT : Status .data_tx_data_12(data_tx_data_12), //INPUT : Data from FIFO transmit .data_tx_valid_12(data_tx_valid_12), //INPUT : Data FIFO transmit Empty .data_tx_sop_12(data_tx_sop_12), //INPUT : Start of Packet .data_tx_eop_12(data_tx_eop_12), //INPUT : End of Packet .data_tx_ready_12(data_tx_ready_12), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_12(tx_ff_uflow_12), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_12(tx_crc_fwd_12), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_12(xoff_gen_12), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_12(xon_gen_12), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_12(magic_sleep_n_12), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_12(magic_wakeup_12), //OUTPUT : MAC WAKE-UP INDICATION // Channel 13 .tbi_rx_clk_13(tbi_rx_clk_13), //INPUT : Receive TBI Clock .tbi_tx_clk_13(tbi_tx_clk_13), //INPUT : Transmit TBI Clock .tbi_rx_d_13(tbi_rx_d_13), //INPUT : Receive TBI Interface .tbi_tx_d_13(tbi_tx_d_13), //OUTPUT : Transmit TBI Interface .sd_loopback_13(sd_loopback_13), //OUTPUT : SERDES Loopback Enable .powerdown_13(powerdown_13), //OUTPUT : Powerdown Enable .led_col_13(led_col_13), //OUTPUT : Collision Indication .led_an_13(led_an_13), //OUTPUT : Auto Negotiation Status .led_char_err_13(led_char_err_13), //OUTPUT : Character error .led_disp_err_13(led_disp_err_13), //OUTPUT : Disparity error .led_crs_13(led_crs_13), //OUTPUT : Carrier sense .led_link_13(led_link_13), //OUTPUT : Valid link .mac_rx_clk_13(mac_rx_clk_13), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_13(mac_tx_clk_13), //OUTPUT : Av-ST Tx Clock .data_rx_sop_13(data_rx_sop_13), //OUTPUT : Start of Packet .data_rx_eop_13(data_rx_eop_13), //OUTPUT : End of Packet .data_rx_data_13(data_rx_data_13), //OUTPUT : Data from FIFO .data_rx_error_13(data_rx_error_13), //OUTPUT : Receive packet error .data_rx_valid_13(data_rx_valid_13), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_13(data_rx_ready_13), //OUTPUT : Data Receive Ready .pkt_class_data_13(pkt_class_data_13), //OUTPUT : Frame Type Indication .pkt_class_valid_13(pkt_class_valid_13), //OUTPUT : Frame Type Indication Valid .data_tx_error_13(data_tx_error_13), //INPUT : Status .data_tx_data_13(data_tx_data_13), //INPUT : Data from FIFO transmit .data_tx_valid_13(data_tx_valid_13), //INPUT : Data FIFO transmit Empty .data_tx_sop_13(data_tx_sop_13), //INPUT : Start of Packet .data_tx_eop_13(data_tx_eop_13), //INPUT : End of Packet .data_tx_ready_13(data_tx_ready_13), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_13(tx_ff_uflow_13), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_13(tx_crc_fwd_13), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_13(xoff_gen_13), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_13(xon_gen_13), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_13(magic_sleep_n_13), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_13(magic_wakeup_13), //OUTPUT : MAC WAKE-UP INDICATION // Channel 14 .tbi_rx_clk_14(tbi_rx_clk_14), //INPUT : Receive TBI Clock .tbi_tx_clk_14(tbi_tx_clk_14), //INPUT : Transmit TBI Clock .tbi_rx_d_14(tbi_rx_d_14), //INPUT : Receive TBI Interface .tbi_tx_d_14(tbi_tx_d_14), //OUTPUT : Transmit TBI Interface .sd_loopback_14(sd_loopback_14), //OUTPUT : SERDES Loopback Enable .powerdown_14(powerdown_14), //OUTPUT : Powerdown Enable .led_col_14(led_col_14), //OUTPUT : Collision Indication .led_an_14(led_an_14), //OUTPUT : Auto Negotiation Status .led_char_err_14(led_char_err_14), //OUTPUT : Character error .led_disp_err_14(led_disp_err_14), //OUTPUT : Disparity error .led_crs_14(led_crs_14), //OUTPUT : Carrier sense .led_link_14(led_link_14), //OUTPUT : Valid link .mac_rx_clk_14(mac_rx_clk_14), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_14(mac_tx_clk_14), //OUTPUT : Av-ST Tx Clock .data_rx_sop_14(data_rx_sop_14), //OUTPUT : Start of Packet .data_rx_eop_14(data_rx_eop_14), //OUTPUT : End of Packet .data_rx_data_14(data_rx_data_14), //OUTPUT : Data from FIFO .data_rx_error_14(data_rx_error_14), //OUTPUT : Receive packet error .data_rx_valid_14(data_rx_valid_14), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_14(data_rx_ready_14), //OUTPUT : Data Receive Ready .pkt_class_data_14(pkt_class_data_14), //OUTPUT : Frame Type Indication .pkt_class_valid_14(pkt_class_valid_14), //OUTPUT : Frame Type Indication Valid .data_tx_error_14(data_tx_error_14), //INPUT : Status .data_tx_data_14(data_tx_data_14), //INPUT : Data from FIFO transmit .data_tx_valid_14(data_tx_valid_14), //INPUT : Data FIFO transmit Empty .data_tx_sop_14(data_tx_sop_14), //INPUT : Start of Packet .data_tx_eop_14(data_tx_eop_14), //INPUT : End of Packet .data_tx_ready_14(data_tx_ready_14), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_14(tx_ff_uflow_14), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_14(tx_crc_fwd_14), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_14(xoff_gen_14), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_14(xon_gen_14), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_14(magic_sleep_n_14), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_14(magic_wakeup_14), //OUTPUT : MAC WAKE-UP INDICATION // Channel 15 .tbi_rx_clk_15(tbi_rx_clk_15), //INPUT : Receive TBI Clock .tbi_tx_clk_15(tbi_tx_clk_15), //INPUT : Transmit TBI Clock .tbi_rx_d_15(tbi_rx_d_15), //INPUT : Receive TBI Interface .tbi_tx_d_15(tbi_tx_d_15), //OUTPUT : Transmit TBI Interface .sd_loopback_15(sd_loopback_15), //OUTPUT : SERDES Loopback Enable .powerdown_15(powerdown_15), //OUTPUT : Powerdown Enable .led_col_15(led_col_15), //OUTPUT : Collision Indication .led_an_15(led_an_15), //OUTPUT : Auto Negotiation Status .led_char_err_15(led_char_err_15), //OUTPUT : Character error .led_disp_err_15(led_disp_err_15), //OUTPUT : Disparity error .led_crs_15(led_crs_15), //OUTPUT : Carrier sense .led_link_15(led_link_15), //OUTPUT : Valid link .mac_rx_clk_15(mac_rx_clk_15), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_15(mac_tx_clk_15), //OUTPUT : Av-ST Tx Clock .data_rx_sop_15(data_rx_sop_15), //OUTPUT : Start of Packet .data_rx_eop_15(data_rx_eop_15), //OUTPUT : End of Packet .data_rx_data_15(data_rx_data_15), //OUTPUT : Data from FIFO .data_rx_error_15(data_rx_error_15), //OUTPUT : Receive packet error .data_rx_valid_15(data_rx_valid_15), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_15(data_rx_ready_15), //OUTPUT : Data Receive Ready .pkt_class_data_15(pkt_class_data_15), //OUTPUT : Frame Type Indication .pkt_class_valid_15(pkt_class_valid_15), //OUTPUT : Frame Type Indication Valid .data_tx_error_15(data_tx_error_15), //INPUT : Status .data_tx_data_15(data_tx_data_15), //INPUT : Data from FIFO transmit .data_tx_valid_15(data_tx_valid_15), //INPUT : Data FIFO transmit Empty .data_tx_sop_15(data_tx_sop_15), //INPUT : Start of Packet .data_tx_eop_15(data_tx_eop_15), //INPUT : End of Packet .data_tx_ready_15(data_tx_ready_15), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_15(tx_ff_uflow_15), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_15(tx_crc_fwd_15), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_15(xoff_gen_15), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_15(xon_gen_15), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_15(magic_sleep_n_15), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_15(magic_wakeup_15), //OUTPUT : MAC WAKE-UP INDICATION // Channel 16 .tbi_rx_clk_16(tbi_rx_clk_16), //INPUT : Receive TBI Clock .tbi_tx_clk_16(tbi_tx_clk_16), //INPUT : Transmit TBI Clock .tbi_rx_d_16(tbi_rx_d_16), //INPUT : Receive TBI Interface .tbi_tx_d_16(tbi_tx_d_16), //OUTPUT : Transmit TBI Interface .sd_loopback_16(sd_loopback_16), //OUTPUT : SERDES Loopback Enable .powerdown_16(powerdown_16), //OUTPUT : Powerdown Enable .led_col_16(led_col_16), //OUTPUT : Collision Indication .led_an_16(led_an_16), //OUTPUT : Auto Negotiation Status .led_char_err_16(led_char_err_16), //OUTPUT : Character error .led_disp_err_16(led_disp_err_16), //OUTPUT : Disparity error .led_crs_16(led_crs_16), //OUTPUT : Carrier sense .led_link_16(led_link_16), //OUTPUT : Valid link .mac_rx_clk_16(mac_rx_clk_16), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_16(mac_tx_clk_16), //OUTPUT : Av-ST Tx Clock .data_rx_sop_16(data_rx_sop_16), //OUTPUT : Start of Packet .data_rx_eop_16(data_rx_eop_16), //OUTPUT : End of Packet .data_rx_data_16(data_rx_data_16), //OUTPUT : Data from FIFO .data_rx_error_16(data_rx_error_16), //OUTPUT : Receive packet error .data_rx_valid_16(data_rx_valid_16), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_16(data_rx_ready_16), //OUTPUT : Data Receive Ready .pkt_class_data_16(pkt_class_data_16), //OUTPUT : Frame Type Indication .pkt_class_valid_16(pkt_class_valid_16), //OUTPUT : Frame Type Indication Valid .data_tx_error_16(data_tx_error_16), //INPUT : Status .data_tx_data_16(data_tx_data_16), //INPUT : Data from FIFO transmit .data_tx_valid_16(data_tx_valid_16), //INPUT : Data FIFO transmit Empty .data_tx_sop_16(data_tx_sop_16), //INPUT : Start of Packet .data_tx_eop_16(data_tx_eop_16), //INPUT : End of Packet .data_tx_ready_16(data_tx_ready_16), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_16(tx_ff_uflow_16), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_16(tx_crc_fwd_16), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_16(xoff_gen_16), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_16(xon_gen_16), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_16(magic_sleep_n_16), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_16(magic_wakeup_16), //OUTPUT : MAC WAKE-UP INDICATION // Channel 17 .tbi_rx_clk_17(tbi_rx_clk_17), //INPUT : Receive TBI Clock .tbi_tx_clk_17(tbi_tx_clk_17), //INPUT : Transmit TBI Clock .tbi_rx_d_17(tbi_rx_d_17), //INPUT : Receive TBI Interface .tbi_tx_d_17(tbi_tx_d_17), //OUTPUT : Transmit TBI Interface .sd_loopback_17(sd_loopback_17), //OUTPUT : SERDES Loopback Enable .powerdown_17(powerdown_17), //OUTPUT : Powerdown Enable .led_col_17(led_col_17), //OUTPUT : Collision Indication .led_an_17(led_an_17), //OUTPUT : Auto Negotiation Status .led_char_err_17(led_char_err_17), //OUTPUT : Character error .led_disp_err_17(led_disp_err_17), //OUTPUT : Disparity error .led_crs_17(led_crs_17), //OUTPUT : Carrier sense .led_link_17(led_link_17), //OUTPUT : Valid link .mac_rx_clk_17(mac_rx_clk_17), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_17(mac_tx_clk_17), //OUTPUT : Av-ST Tx Clock .data_rx_sop_17(data_rx_sop_17), //OUTPUT : Start of Packet .data_rx_eop_17(data_rx_eop_17), //OUTPUT : End of Packet .data_rx_data_17(data_rx_data_17), //OUTPUT : Data from FIFO .data_rx_error_17(data_rx_error_17), //OUTPUT : Receive packet error .data_rx_valid_17(data_rx_valid_17), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_17(data_rx_ready_17), //OUTPUT : Data Receive Ready .pkt_class_data_17(pkt_class_data_17), //OUTPUT : Frame Type Indication .pkt_class_valid_17(pkt_class_valid_17), //OUTPUT : Frame Type Indication Valid .data_tx_error_17(data_tx_error_17), //INPUT : Status .data_tx_data_17(data_tx_data_17), //INPUT : Data from FIFO transmit .data_tx_valid_17(data_tx_valid_17), //INPUT : Data FIFO transmit Empty .data_tx_sop_17(data_tx_sop_17), //INPUT : Start of Packet .data_tx_eop_17(data_tx_eop_17), //INPUT : End of Packet .data_tx_ready_17(data_tx_ready_17), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_17(tx_ff_uflow_17), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_17(tx_crc_fwd_17), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_17(xoff_gen_17), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_17(xon_gen_17), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_17(magic_sleep_n_17), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_17(magic_wakeup_17), //OUTPUT : MAC WAKE-UP INDICATION // Channel 18 .tbi_rx_clk_18(tbi_rx_clk_18), //INPUT : Receive TBI Clock .tbi_tx_clk_18(tbi_tx_clk_18), //INPUT : Transmit TBI Clock .tbi_rx_d_18(tbi_rx_d_18), //INPUT : Receive TBI Interface .tbi_tx_d_18(tbi_tx_d_18), //OUTPUT : Transmit TBI Interface .sd_loopback_18(sd_loopback_18), //OUTPUT : SERDES Loopback Enable .powerdown_18(powerdown_18), //OUTPUT : Powerdown Enable .led_col_18(led_col_18), //OUTPUT : Collision Indication .led_an_18(led_an_18), //OUTPUT : Auto Negotiation Status .led_char_err_18(led_char_err_18), //OUTPUT : Character error .led_disp_err_18(led_disp_err_18), //OUTPUT : Disparity error .led_crs_18(led_crs_18), //OUTPUT : Carrier sense .led_link_18(led_link_18), //OUTPUT : Valid link .mac_rx_clk_18(mac_rx_clk_18), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_18(mac_tx_clk_18), //OUTPUT : Av-ST Tx Clock .data_rx_sop_18(data_rx_sop_18), //OUTPUT : Start of Packet .data_rx_eop_18(data_rx_eop_18), //OUTPUT : End of Packet .data_rx_data_18(data_rx_data_18), //OUTPUT : Data from FIFO .data_rx_error_18(data_rx_error_18), //OUTPUT : Receive packet error .data_rx_valid_18(data_rx_valid_18), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_18(data_rx_ready_18), //OUTPUT : Data Receive Ready .pkt_class_data_18(pkt_class_data_18), //OUTPUT : Frame Type Indication .pkt_class_valid_18(pkt_class_valid_18), //OUTPUT : Frame Type Indication Valid .data_tx_error_18(data_tx_error_18), //INPUT : Status .data_tx_data_18(data_tx_data_18), //INPUT : Data from FIFO transmit .data_tx_valid_18(data_tx_valid_18), //INPUT : Data FIFO transmit Empty .data_tx_sop_18(data_tx_sop_18), //INPUT : Start of Packet .data_tx_eop_18(data_tx_eop_18), //INPUT : End of Packet .data_tx_ready_18(data_tx_ready_18), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_18(tx_ff_uflow_18), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_18(tx_crc_fwd_18), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_18(xoff_gen_18), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_18(xon_gen_18), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_18(magic_sleep_n_18), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_18(magic_wakeup_18), //OUTPUT : MAC WAKE-UP INDICATION // Channel 19 .tbi_rx_clk_19(tbi_rx_clk_19), //INPUT : Receive TBI Clock .tbi_tx_clk_19(tbi_tx_clk_19), //INPUT : Transmit TBI Clock .tbi_rx_d_19(tbi_rx_d_19), //INPUT : Receive TBI Interface .tbi_tx_d_19(tbi_tx_d_19), //OUTPUT : Transmit TBI Interface .sd_loopback_19(sd_loopback_19), //OUTPUT : SERDES Loopback Enable .powerdown_19(powerdown_19), //OUTPUT : Powerdown Enable .led_col_19(led_col_19), //OUTPUT : Collision Indication .led_an_19(led_an_19), //OUTPUT : Auto Negotiation Status .led_char_err_19(led_char_err_19), //OUTPUT : Character error .led_disp_err_19(led_disp_err_19), //OUTPUT : Disparity error .led_crs_19(led_crs_19), //OUTPUT : Carrier sense .led_link_19(led_link_19), //OUTPUT : Valid link .mac_rx_clk_19(mac_rx_clk_19), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_19(mac_tx_clk_19), //OUTPUT : Av-ST Tx Clock .data_rx_sop_19(data_rx_sop_19), //OUTPUT : Start of Packet .data_rx_eop_19(data_rx_eop_19), //OUTPUT : End of Packet .data_rx_data_19(data_rx_data_19), //OUTPUT : Data from FIFO .data_rx_error_19(data_rx_error_19), //OUTPUT : Receive packet error .data_rx_valid_19(data_rx_valid_19), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_19(data_rx_ready_19), //OUTPUT : Data Receive Ready .pkt_class_data_19(pkt_class_data_19), //OUTPUT : Frame Type Indication .pkt_class_valid_19(pkt_class_valid_19), //OUTPUT : Frame Type Indication Valid .data_tx_error_19(data_tx_error_19), //INPUT : Status .data_tx_data_19(data_tx_data_19), //INPUT : Data from FIFO transmit .data_tx_valid_19(data_tx_valid_19), //INPUT : Data FIFO transmit Empty .data_tx_sop_19(data_tx_sop_19), //INPUT : Start of Packet .data_tx_eop_19(data_tx_eop_19), //INPUT : End of Packet .data_tx_ready_19(data_tx_ready_19), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_19(tx_ff_uflow_19), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_19(tx_crc_fwd_19), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_19(xoff_gen_19), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_19(xon_gen_19), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_19(magic_sleep_n_19), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_19(magic_wakeup_19), //OUTPUT : MAC WAKE-UP INDICATION // Channel 20 .tbi_rx_clk_20(tbi_rx_clk_20), //INPUT : Receive TBI Clock .tbi_tx_clk_20(tbi_tx_clk_20), //INPUT : Transmit TBI Clock .tbi_rx_d_20(tbi_rx_d_20), //INPUT : Receive TBI Interface .tbi_tx_d_20(tbi_tx_d_20), //OUTPUT : Transmit TBI Interface .sd_loopback_20(sd_loopback_20), //OUTPUT : SERDES Loopback Enable .powerdown_20(powerdown_20), //OUTPUT : Powerdown Enable .led_col_20(led_col_20), //OUTPUT : Collision Indication .led_an_20(led_an_20), //OUTPUT : Auto Negotiation Status .led_char_err_20(led_char_err_20), //OUTPUT : Character error .led_disp_err_20(led_disp_err_20), //OUTPUT : Disparity error .led_crs_20(led_crs_20), //OUTPUT : Carrier sense .led_link_20(led_link_20), //OUTPUT : Valid link .mac_rx_clk_20(mac_rx_clk_20), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_20(mac_tx_clk_20), //OUTPUT : Av-ST Tx Clock .data_rx_sop_20(data_rx_sop_20), //OUTPUT : Start of Packet .data_rx_eop_20(data_rx_eop_20), //OUTPUT : End of Packet .data_rx_data_20(data_rx_data_20), //OUTPUT : Data from FIFO .data_rx_error_20(data_rx_error_20), //OUTPUT : Receive packet error .data_rx_valid_20(data_rx_valid_20), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_20(data_rx_ready_20), //OUTPUT : Data Receive Ready .pkt_class_data_20(pkt_class_data_20), //OUTPUT : Frame Type Indication .pkt_class_valid_20(pkt_class_valid_20), //OUTPUT : Frame Type Indication Valid .data_tx_error_20(data_tx_error_20), //INPUT : Status .data_tx_data_20(data_tx_data_20), //INPUT : Data from FIFO transmit .data_tx_valid_20(data_tx_valid_20), //INPUT : Data FIFO transmit Empty .data_tx_sop_20(data_tx_sop_20), //INPUT : Start of Packet .data_tx_eop_20(data_tx_eop_20), //INPUT : End of Packet .data_tx_ready_20(data_tx_ready_20), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_20(tx_ff_uflow_20), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_20(tx_crc_fwd_20), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_20(xoff_gen_20), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_20(xon_gen_20), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_20(magic_sleep_n_20), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_20(magic_wakeup_20), //OUTPUT : MAC WAKE-UP INDICATION // Channel 21 .tbi_rx_clk_21(tbi_rx_clk_21), //INPUT : Receive TBI Clock .tbi_tx_clk_21(tbi_tx_clk_21), //INPUT : Transmit TBI Clock .tbi_rx_d_21(tbi_rx_d_21), //INPUT : Receive TBI Interface .tbi_tx_d_21(tbi_tx_d_21), //OUTPUT : Transmit TBI Interface .sd_loopback_21(sd_loopback_21), //OUTPUT : SERDES Loopback Enable .powerdown_21(powerdown_21), //OUTPUT : Powerdown Enable .led_col_21(led_col_21), //OUTPUT : Collision Indication .led_an_21(led_an_21), //OUTPUT : Auto Negotiation Status .led_char_err_21(led_char_err_21), //OUTPUT : Character error .led_disp_err_21(led_disp_err_21), //OUTPUT : Disparity error .led_crs_21(led_crs_21), //OUTPUT : Carrier sense .led_link_21(led_link_21), //OUTPUT : Valid link .mac_rx_clk_21(mac_rx_clk_21), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_21(mac_tx_clk_21), //OUTPUT : Av-ST Tx Clock .data_rx_sop_21(data_rx_sop_21), //OUTPUT : Start of Packet .data_rx_eop_21(data_rx_eop_21), //OUTPUT : End of Packet .data_rx_data_21(data_rx_data_21), //OUTPUT : Data from FIFO .data_rx_error_21(data_rx_error_21), //OUTPUT : Receive packet error .data_rx_valid_21(data_rx_valid_21), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_21(data_rx_ready_21), //OUTPUT : Data Receive Ready .pkt_class_data_21(pkt_class_data_21), //OUTPUT : Frame Type Indication .pkt_class_valid_21(pkt_class_valid_21), //OUTPUT : Frame Type Indication Valid .data_tx_error_21(data_tx_error_21), //INPUT : Status .data_tx_data_21(data_tx_data_21), //INPUT : Data from FIFO transmit .data_tx_valid_21(data_tx_valid_21), //INPUT : Data FIFO transmit Empty .data_tx_sop_21(data_tx_sop_21), //INPUT : Start of Packet .data_tx_eop_21(data_tx_eop_21), //INPUT : End of Packet .data_tx_ready_21(data_tx_ready_21), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_21(tx_ff_uflow_21), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_21(tx_crc_fwd_21), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_21(xoff_gen_21), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_21(xon_gen_21), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_21(magic_sleep_n_21), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_21(magic_wakeup_21), //OUTPUT : MAC WAKE-UP INDICATION // Channel 22 .tbi_rx_clk_22(tbi_rx_clk_22), //INPUT : Receive TBI Clock .tbi_tx_clk_22(tbi_tx_clk_22), //INPUT : Transmit TBI Clock .tbi_rx_d_22(tbi_rx_d_22), //INPUT : Receive TBI Interface .tbi_tx_d_22(tbi_tx_d_22), //OUTPUT : Transmit TBI Interface .sd_loopback_22(sd_loopback_22), //OUTPUT : SERDES Loopback Enable .powerdown_22(powerdown_22), //OUTPUT : Powerdown Enable .led_col_22(led_col_22), //OUTPUT : Collision Indication .led_an_22(led_an_22), //OUTPUT : Auto Negotiation Status .led_char_err_22(led_char_err_22), //OUTPUT : Character error .led_disp_err_22(led_disp_err_22), //OUTPUT : Disparity error .led_crs_22(led_crs_22), //OUTPUT : Carrier sense .led_link_22(led_link_22), //OUTPUT : Valid link .mac_rx_clk_22(mac_rx_clk_22), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_22(mac_tx_clk_22), //OUTPUT : Av-ST Tx Clock .data_rx_sop_22(data_rx_sop_22), //OUTPUT : Start of Packet .data_rx_eop_22(data_rx_eop_22), //OUTPUT : End of Packet .data_rx_data_22(data_rx_data_22), //OUTPUT : Data from FIFO .data_rx_error_22(data_rx_error_22), //OUTPUT : Receive packet error .data_rx_valid_22(data_rx_valid_22), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_22(data_rx_ready_22), //OUTPUT : Data Receive Ready .pkt_class_data_22(pkt_class_data_22), //OUTPUT : Frame Type Indication .pkt_class_valid_22(pkt_class_valid_22), //OUTPUT : Frame Type Indication Valid .data_tx_error_22(data_tx_error_22), //INPUT : Status .data_tx_data_22(data_tx_data_22), //INPUT : Data from FIFO transmit .data_tx_valid_22(data_tx_valid_22), //INPUT : Data FIFO transmit Empty .data_tx_sop_22(data_tx_sop_22), //INPUT : Start of Packet .data_tx_eop_22(data_tx_eop_22), //INPUT : End of Packet .data_tx_ready_22(data_tx_ready_22), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_22(tx_ff_uflow_22), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_22(tx_crc_fwd_22), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_22(xoff_gen_22), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_22(xon_gen_22), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_22(magic_sleep_n_22), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_22(magic_wakeup_22), //OUTPUT : MAC WAKE-UP INDICATION // Channel 23 .tbi_rx_clk_23(tbi_rx_clk_23), //INPUT : Receive TBI Clock .tbi_tx_clk_23(tbi_tx_clk_23), //INPUT : Transmit TBI Clock .tbi_rx_d_23(tbi_rx_d_23), //INPUT : Receive TBI Interface .tbi_tx_d_23(tbi_tx_d_23), //OUTPUT : Transmit TBI Interface .sd_loopback_23(sd_loopback_23), //OUTPUT : SERDES Loopback Enable .powerdown_23(powerdown_23), //OUTPUT : Powerdown Enable .led_col_23(led_col_23), //OUTPUT : Collision Indication .led_an_23(led_an_23), //OUTPUT : Auto Negotiation Status .led_char_err_23(led_char_err_23), //OUTPUT : Character error .led_disp_err_23(led_disp_err_23), //OUTPUT : Disparity error .led_crs_23(led_crs_23), //OUTPUT : Carrier sense .led_link_23(led_link_23), //OUTPUT : Valid link .mac_rx_clk_23(mac_rx_clk_23), //OUTPUT : Av-ST Rx Clock .mac_tx_clk_23(mac_tx_clk_23), //OUTPUT : Av-ST Tx Clock .data_rx_sop_23(data_rx_sop_23), //OUTPUT : Start of Packet .data_rx_eop_23(data_rx_eop_23), //OUTPUT : End of Packet .data_rx_data_23(data_rx_data_23), //OUTPUT : Data from FIFO .data_rx_error_23(data_rx_error_23), //OUTPUT : Receive packet error .data_rx_valid_23(data_rx_valid_23), //OUTPUT : Data Receive FIFO Valid .data_rx_ready_23(data_rx_ready_23), //OUTPUT : Data Receive Ready .pkt_class_data_23(pkt_class_data_23), //OUTPUT : Frame Type Indication .pkt_class_valid_23(pkt_class_valid_23), //OUTPUT : Frame Type Indication Valid .data_tx_error_23(data_tx_error_23), //INPUT : Status .data_tx_data_23(data_tx_data_23), //INPUT : Data from FIFO transmit .data_tx_valid_23(data_tx_valid_23), //INPUT : Data FIFO transmit Empty .data_tx_sop_23(data_tx_sop_23), //INPUT : Start of Packet .data_tx_eop_23(data_tx_eop_23), //INPUT : End of Packet .data_tx_ready_23(data_tx_ready_23), //OUTPUT : Data FIFO transmit Read Enable .tx_ff_uflow_23(tx_ff_uflow_23), //OUTPUT : TX FIFO underflow occured (Synchronous with tx_clk) .tx_crc_fwd_23(tx_crc_fwd_23), //INPUT : Forward Current Frame with CRC from Application .xoff_gen_23(xoff_gen_23), //INPUT : XOFF PAUSE FRAME GENERATE .xon_gen_23(xon_gen_23), //INPUT : XON PAUSE FRAME GENERATE .magic_sleep_n_23(magic_sleep_n_23), //INPUT : MAC SLEEP MODE CONTROL .magic_wakeup_23(magic_wakeup_23)); //OUTPUT : MAC WAKE-UP INDICATION defparam U_MULTI_MAC_PCS.USE_SYNC_RESET = USE_SYNC_RESET, U_MULTI_MAC_PCS.RESET_LEVEL = RESET_LEVEL, U_MULTI_MAC_PCS.ENABLE_GMII_LOOPBACK = ENABLE_GMII_LOOPBACK, U_MULTI_MAC_PCS.ENABLE_HD_LOGIC = ENABLE_HD_LOGIC, U_MULTI_MAC_PCS.ENABLE_SUP_ADDR = ENABLE_SUP_ADDR, U_MULTI_MAC_PCS.ENA_HASH = ENA_HASH, U_MULTI_MAC_PCS.STAT_CNT_ENA = STAT_CNT_ENA, U_MULTI_MAC_PCS.CORE_VERSION = CORE_VERSION, U_MULTI_MAC_PCS.CUST_VERSION = CUST_VERSION, U_MULTI_MAC_PCS.REDUCED_INTERFACE_ENA = REDUCED_INTERFACE_ENA, U_MULTI_MAC_PCS.ENABLE_MDIO = ENABLE_MDIO, U_MULTI_MAC_PCS.MDIO_CLK_DIV = MDIO_CLK_DIV, U_MULTI_MAC_PCS.ENABLE_MAGIC_DETECT = ENABLE_MAGIC_DETECT, U_MULTI_MAC_PCS.ENABLE_PADDING = ENABLE_PADDING, U_MULTI_MAC_PCS.ENABLE_LGTH_CHECK = ENABLE_LGTH_CHECK, U_MULTI_MAC_PCS.GBIT_ONLY = GBIT_ONLY, U_MULTI_MAC_PCS.MBIT_ONLY = MBIT_ONLY, U_MULTI_MAC_PCS.REDUCED_CONTROL = REDUCED_CONTROL, U_MULTI_MAC_PCS.CRC32DWIDTH = CRC32DWIDTH, U_MULTI_MAC_PCS.CRC32GENDELAY = CRC32GENDELAY, U_MULTI_MAC_PCS.CRC32CHECK16BIT = CRC32CHECK16BIT, U_MULTI_MAC_PCS.CRC32S1L2_EXTERN = CRC32S1L2_EXTERN, U_MULTI_MAC_PCS.ENABLE_SHIFT16 = ENABLE_SHIFT16, U_MULTI_MAC_PCS.ENABLE_MAC_FLOW_CTRL = ENABLE_MAC_FLOW_CTRL, U_MULTI_MAC_PCS.ENABLE_MAC_TXADDR_SET = ENABLE_MAC_TXADDR_SET, U_MULTI_MAC_PCS.ENABLE_MAC_RX_VLAN = ENABLE_MAC_RX_VLAN, U_MULTI_MAC_PCS.ENABLE_MAC_TX_VLAN = ENABLE_MAC_TX_VLAN, U_MULTI_MAC_PCS.PHY_IDENTIFIER = PHY_IDENTIFIER, U_MULTI_MAC_PCS.DEV_VERSION = DEV_VERSION, U_MULTI_MAC_PCS.ENABLE_SGMII = ENABLE_SGMII, U_MULTI_MAC_PCS.MAX_CHANNELS = MAX_CHANNELS, U_MULTI_MAC_PCS.CHANNEL_WIDTH = CHANNEL_WIDTH, U_MULTI_MAC_PCS.ENABLE_RX_FIFO_STATUS = ENABLE_RX_FIFO_STATUS, U_MULTI_MAC_PCS.ENABLE_EXTENDED_STAT_REG = ENABLE_EXTENDED_STAT_REG, U_MULTI_MAC_PCS.ENABLE_CLK_SHARING = ENABLE_CLK_SHARING, U_MULTI_MAC_PCS.ENABLE_REG_SHARING = ENABLE_REG_SHARING; endmodule // module altera_tse_multi_mac_pcs