Subversion Repositories t80

--
-- Z80 compatible microprocessor core, synchronous top level with clock enable
-- Different timing than the original z80
-- Inputs needs to be synchronous and outputs may glitch
--
-- Version : 0235
--
-- Copyright (c) 2001-2002 Daniel Wallner (jesus@opencores.org)
--
-- All rights reserved
--
-- Redistribution and use in source and synthezised forms, with or without
-- modification, are permitted provided that the following conditions are met:
--
-- Redistributions of source code must retain the above copyright notice,
-- this list of conditions and the following disclaimer.
--
-- Redistributions in synthesized form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- Neither the name of the author nor the names of other contributors may
-- be used to endorse or promote products derived from this software without
-- specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-- POSSIBILITY OF SUCH DAMAGE.
--
-- Please report bugs to the author, but before you do so, please
-- make sure that this is not a derivative work and that
-- you have the latest version of this file.
--
-- The latest version of this file can be found at:
--	http://www.opencores.org/cvsweb.shtml/t80/
--
-- Limitations :
--
-- File history :
--
--	0235 : First release
--
 
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.T80_Pack.all;
 
entity T80se is
	generic(
		Mode : integer := 0	-- 0 => Z80, 1 => Fast Z80, 2 => 8080, 3 => GB
	);
	port(
		RESET_n		: in std_logic;
		CLK_n		: in std_logic;
		CLKEN		: in std_logic;
		WAIT_n		: in std_logic;
		INT_n		: in std_logic;
		NMI_n		: in std_logic;
		BUSRQ_n		: in std_logic;
		M1_n		: out std_logic;
		MREQ_n		: out std_logic;
		IORQ_n		: out std_logic;
		RD_n		: out std_logic;
		WR_n		: out std_logic;
		RFSH_n		: out std_logic;
		HALT_n		: out std_logic;
		BUSAK_n		: out std_logic;
		A			: out std_logic_vector(15 downto 0);
		DI			: in std_logic_vector(7 downto 0);
		DO			: out std_logic_vector(7 downto 0)
	);
end T80se;
 
architecture rtl of T80se is
 
	signal False_M1		: std_logic;
	signal IntCycle_n	: std_logic;
	signal Write		: std_logic;
	signal IORQ			: std_logic;
	signal DI_Reg		: std_logic_vector(7 downto 0);
	signal MCycle		: std_logic_vector(2 downto 0);
	signal TState		: std_logic_vector(2 downto 0);
 
begin
 
	u0 : T80
		generic map(
			Mode => Mode)
		port map(
			CEN => CLKEN,
			M1_n => M1_n,
			IORQ => IORQ,
			Write => Write,
			RFSH_n => RFSH_n,
			HALT_n => HALT_n,
			WAIT_n => Wait_n,
			INT_n => INT_n,
			NMI_n => NMI_n,
			RESET_n => RESET_n,
			BUSRQ_n => BUSRQ_n,
			BUSAK_n => BUSAK_n,
			CLK_n => CLK_n,
			A => A,
			DInst => DI,
			DI => DI_Reg,
			DO => DO,
			MC => MCycle,
			TS => TState,
			False_M1 => False_M1,
			IntCycle_n => IntCycle_n);
 
	process (RESET_n, CLK_n)
	begin
		if RESET_n = '0' then
			RD_n <= '1';
			WR_n <= '1';
			IORQ_n <= '1';
			MREQ_n <= '1';
			DI_Reg <= "00000000";
		elsif CLK_n'event and CLK_n = '1' then
			if CLKEN = '1' then
				RD_n <= '1';
				WR_n <= '1';
				IORQ_n <= '1';
				MREQ_n <= '1';
				if MCycle = "001" and False_M1 = '0' then
					if TState = "001" or (TState = "010" and Wait_n = '0') then
						RD_n <= not IntCycle_n;
						MREQ_n <= not IntCycle_n;
						IORQ_n <= IntCycle_n;
					end if;
					if TState = "011" then
						MREQ_n <= '0';
					end if;
				else
					if (TState = "001" or (TState = "010" and Wait_n = '0')) and Write = '0' then
						RD_n <= '0';
						IORQ_n <= not IORQ;
						MREQ_n <= IORQ;
					end if;
					if TState = "010" and Write = '1' then
						WR_n <= '0';
						IORQ_n <= not IORQ;
						MREQ_n <= IORQ;
					end if;
				end if;
				if TState = "010" and Wait_n = '1' then
					DI_Reg <= DI;
				end if;
			end if;
		end if;
	end process;
 
end;