OpenCores
URL https://opencores.org/ocsvn/usb_fpga_1_2/usb_fpga_1_2/trunk

Subversion Repositories usb_fpga_1_2

[/] [usb_fpga_1_2/] [trunk/] [examples/] [usb-fpga-1.11/] [1.11a/] [intraffic/] [Readme] - Rev 8

Compare with Previous | Blame | View Log

intraffic
---------

This example shows how the EZ-USB input FIFO interface is used.

A traffic generator sends test data to the EZ-USB. The hosts PC reads
out this data and verifies it.

The traffic generator is implemented in the FPGA and supports two modes:

1. (IOA3=0) This mode supports data flow control using FIFO full flag
   (FLAGB) and SLWR control pin. Use this mode as starting point for 
   data acquisition applications.
   
2. (IOA=3) In this mode and uninterrupted test pattern is generated,
   i.e. flow control is disabled. This mode is used for performance
   measurements (speed rate and interrupt measurements)
   

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.