URL
https://opencores.org/ocsvn/usb_fpga_2_14/usb_fpga_2_14/trunk
Subversion Repositories usb_fpga_2_14
[/] [usb_fpga_2_14/] [trunk/] [examples/] [memfifo/] [fpga-2.04b/] [ipcore_dir/] [mem0/] [user_design/] [sim/] [wr_data_gen.v] - Rev 2
Compare with Previous | Blame | View Log
//***************************************************************************** // (c) Copyright 2008-2009 Xilinx, Inc. All rights reserved. // // This file contains confidential and proprietary information // of Xilinx, Inc. and is protected under U.S. and // international copyright and other intellectual property // laws. // // DISCLAIMER // This disclaimer is not a license and does not grant any // rights to the materials distributed herewith. Except as // otherwise provided in a valid license issued to you by // Xilinx, and to the maximum extent permitted by applicable // law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND // WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES // AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING // BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- // INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and // (2) Xilinx shall not be liable (whether in contract or tort, // including negligence, or under any other theory of // liability) for any loss or damage of any kind or nature // related to, arising under or in connection with these // materials, including for any direct, or any indirect, // special, incidental, or consequential loss or damage // (including loss of data, profits, goodwill, or any type of // loss or damage suffered as a result of any action brought // by a third party) even if such damage or loss was // reasonably foreseeable or Xilinx had been advised of the // possibility of the same. // // CRITICAL APPLICATIONS // Xilinx products are not designed or intended to be fail- // safe, or for use in any application requiring fail-safe // performance, such as life-support or safety devices or // systems, Class III medical devices, nuclear facilities, // applications related to the deployment of airbags, or any // other applications that could lead to death, personal // injury, or severe property or environmental damage // (individually and collectively, "Critical // Applications"). Customer assumes the sole risk and // liability of any use of Xilinx products in Critical // Applications, subject only to applicable laws and // regulations governing limitations on product liability. // // THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS // PART OF THIS FILE AT ALL TIMES. // //***************************************************************************** // ____ ____ // / /\/ / // /___/ \ / Vendor: Xilinx // \ \ \/ Version: %version // \ \ Application: MIG // / / Filename: wr_data_gen.v // /___/ /\ Date Last Modified: // \ \ / \ Date Created: // \___\/\___\ // //Device: Spartan6 //Design Name: DDR/DDR2/DDR3/LPDDR //Purpose: //Reference: //Revision History: //***************************************************************************** `timescale 1ps/1ps module wr_data_gen # ( parameter TCQ = 100, parameter FAMILY = "SPARTAN6", // "SPARTAN6", "VIRTEX6" parameter MEM_BURST_LEN = 8, parameter MODE = "WR", //"WR", "RD" parameter ADDR_WIDTH = 32, parameter BL_WIDTH = 6, parameter DWIDTH = 32, parameter DATA_PATTERN = "DGEN_PRBS", //"DGEN__HAMMER", "DGEN_WALING1","DGEN_WALING0","DGEN_ADDR","DGEN_NEIGHBOR","DGEN_PRBS","DGEN_ALL" parameter NUM_DQ_PINS = 8, parameter SEL_VICTIM_LINE = 3, // VICTIM LINE is one of the DQ pins is selected to be different than hammer pattern parameter COLUMN_WIDTH = 10, parameter EYE_TEST = "FALSE" ) ( input clk_i, // input [4:0] rst_i, input [31:0] prbs_fseed_i, input [3:0] data_mode_i, // "00" = bram; output cmd_rdy_o, // ready to receive command. It should assert when data_port is ready at the // beginning and will be deasserted once see the cmd_valid_i is asserted. // And then it should reasserted when // it is generating the last_word. input cmd_valid_i, // when both cmd_valid_i and cmd_rdy_o is high, the command is valid. input cmd_validB_i, input cmd_validC_i, output last_word_o, // input [5:0] port_data_counts_i,// connect to data port fifo counts // input [ADDR_WIDTH-1:0] m_addr_i, input [DWIDTH-1:0] fixed_data_i, input [ADDR_WIDTH-1:0] addr_i, // generated address used to determine data pattern. input [BL_WIDTH-1:0] bl_i, // generated burst length for control the burst data input data_rdy_i, // connect from mcb_wr_full when used as wr_data_gen // connect from mcb_rd_empty when used as rd_data_gen // When both data_rdy and data_valid is asserted, the ouput data is valid. output data_valid_o, // connect to wr_en or rd_en and is asserted whenever the // pattern is available. output [DWIDTH-1:0] data_o, // generated data pattern output reg data_wr_end_o ); // reg [DWIDTH-1:0] data; (*EQUIVALENT_REGISTER_REMOVAL="NO"*) reg cmd_rdy,cmd_rdyB, cmd_rdyC,cmd_rdyD,cmd_rdyE,cmd_rdyF; (*EQUIVALENT_REGISTER_REMOVAL="NO"*) reg cmd_start,cmd_startB,cmd_startC,cmd_startD,cmd_startE,cmd_startF; reg burst_count_reached2; reg data_valid; reg [6:0]user_burst_cnt; reg [2:0] walk_cnt; wire fifo_not_full; integer i,j; reg [31:0] w3data; assign fifo_not_full = data_rdy_i; always @( posedge clk_i) begin if ((user_burst_cnt == 2 || (cmd_start && bl_i == 1 && FAMILY == "VIRTEX6")) && (fifo_not_full)) data_wr_end_o <= #TCQ 1'b1; else data_wr_end_o <= #TCQ 1'b0; end always @ (posedge clk_i) begin cmd_start <= #TCQ cmd_validC_i & cmd_rdyC ; cmd_startB <= #TCQ cmd_valid_i & cmd_rdyB; cmd_startC <= #TCQ cmd_validB_i & cmd_rdyC; cmd_startD <= #TCQ cmd_validB_i & cmd_rdyD; cmd_startE <= #TCQ cmd_validB_i & cmd_rdyE; cmd_startF <= #TCQ cmd_validB_i & cmd_rdyF; end // counter to count user burst length always @( posedge clk_i) begin if ( rst_i[0] ) user_burst_cnt <= #TCQ 'd0; else if(cmd_start) if (FAMILY == "SPARTAN6") begin if (bl_i == 6'b000000) user_burst_cnt <= #TCQ 7'b1000000; else user_burst_cnt <= #TCQ bl_i; end else user_burst_cnt <= #TCQ bl_i; else if(fifo_not_full) if (user_burst_cnt != 6'd0) user_burst_cnt <= #TCQ user_burst_cnt - 1'b1; else user_burst_cnt <=#TCQ 'd0; end reg u_bcount_2; wire last_word_t; always @ (posedge clk_i) begin if ((user_burst_cnt == 2 && fifo_not_full )|| (cmd_startC && bl_i == 1)) u_bcount_2 <= #TCQ 1'b1; else if (last_word_o) u_bcount_2 <= #TCQ 1'b0; end assign last_word_o = u_bcount_2 & fifo_not_full; // cmd_rdy_o assert when the dat fifo is not full and deassert once cmd_valid_i // is assert and reassert during the last data assign cmd_rdy_o = cmd_rdy & fifo_not_full; always @( posedge clk_i) begin if ( rst_i[0] ) cmd_rdy <= #TCQ 1'b1; else if (cmd_start) if (bl_i == 1) cmd_rdy <= #TCQ 1'b1; else cmd_rdy <= #TCQ 1'b0; else if ((user_burst_cnt == 6'd2 && fifo_not_full ) ) cmd_rdy <= #TCQ 1'b1; end always @( posedge clk_i) begin if ( rst_i [0]) cmd_rdyB <= #TCQ 1'b1; else if (cmd_startB) if (bl_i == 1) cmd_rdyB <= #TCQ 1'b1; else cmd_rdyB <= #TCQ 1'b0; else if ((user_burst_cnt == 6'd2 && fifo_not_full ) ) cmd_rdyB <= #TCQ 1'b1; end always @( posedge clk_i) begin if ( rst_i[0] ) cmd_rdyC <= #TCQ 1'b1; else if (cmd_startC) if (bl_i == 1) cmd_rdyC <= #TCQ 1'b1; else cmd_rdyC <= #TCQ 1'b0; else if ((user_burst_cnt == 6'd2 && fifo_not_full ) ) cmd_rdyC <= #TCQ 1'b1; end always @( posedge clk_i) begin if ( rst_i[0] ) cmd_rdyD <= #TCQ 1'b1; else if (cmd_startD) if (bl_i == 1) cmd_rdyD <= #TCQ 1'b1; else cmd_rdyD <= #TCQ 1'b0; else if ((user_burst_cnt == 6'd2 && fifo_not_full ) ) cmd_rdyD <= #TCQ 1'b1; end always @( posedge clk_i) begin if ( rst_i[0] ) cmd_rdyE <= #TCQ 1'b1; else if (cmd_startE) if (bl_i == 1) cmd_rdyE <= #TCQ 1'b1; else cmd_rdyE <= #TCQ 1'b0; else if ((user_burst_cnt == 6'd2 && fifo_not_full ) ) cmd_rdyE <= #TCQ 1'b1; end always @( posedge clk_i) begin if ( rst_i[0] ) cmd_rdyF <= #TCQ 1'b1; else if (cmd_startF) if (bl_i == 1) cmd_rdyF <= #TCQ 1'b1; else cmd_rdyF <= #TCQ 1'b0; else if ((user_burst_cnt == 6'd2 && fifo_not_full ) ) cmd_rdyF <= #TCQ 1'b1; end always @ (posedge clk_i) begin if (rst_i[1]) data_valid <= #TCQ 'd0; else if(cmd_start) data_valid <= #TCQ 1'b1; else if (fifo_not_full && user_burst_cnt <= 6'd1) data_valid <= #TCQ 1'b0; end assign data_valid_o = data_valid & fifo_not_full; generate if (FAMILY == "SPARTAN6") begin : SP6_WDGEN sp6_data_gen # ( .TCQ (TCQ), .ADDR_WIDTH (32 ), .BL_WIDTH (BL_WIDTH ), .DWIDTH (DWIDTH ), .DATA_PATTERN (DATA_PATTERN ), .NUM_DQ_PINS (NUM_DQ_PINS ), .COLUMN_WIDTH (COLUMN_WIDTH) ) sp6_data_gen ( .clk_i (clk_i ), .rst_i (rst_i[1] ), .data_rdy_i (data_rdy_i ), .prbs_fseed_i (prbs_fseed_i), .data_mode_i (data_mode_i ), .cmd_startA (cmd_start ), .cmd_startB (cmd_startB ), .cmd_startC (cmd_startC ), .cmd_startD (cmd_startD ), .cmd_startE (cmd_startE ), .fixed_data_i (fixed_data_i), .addr_i (addr_i ), .user_burst_cnt (user_burst_cnt), .fifo_rdy_i (fifo_not_full ), .data_o (data_o ) ); end endgenerate generate if (FAMILY == "VIRTEX6") begin : V6_WDGEN v6_data_gen # ( .TCQ (TCQ), .ADDR_WIDTH (32 ), .BL_WIDTH (BL_WIDTH ), .DWIDTH (DWIDTH ), .MEM_BURST_LEN (MEM_BURST_LEN), .DATA_PATTERN (DATA_PATTERN ), .NUM_DQ_PINS (NUM_DQ_PINS ), .SEL_VICTIM_LINE (SEL_VICTIM_LINE), .COLUMN_WIDTH (COLUMN_WIDTH), .EYE_TEST (EYE_TEST) ) v6_data_gen ( .clk_i (clk_i ), .rst_i (rst_i[1] ), .data_rdy_i (data_rdy_i ), .prbs_fseed_i (prbs_fseed_i), .data_mode_i (data_mode_i ), .cmd_startA (cmd_start ), .cmd_startB (cmd_startB ), .cmd_startC (cmd_startC ), .cmd_startD (cmd_startD ), .cmd_startE (cmd_startE ), .m_addr_i (addr_i/*m_addr_i*/), .fixed_data_i (fixed_data_i), .addr_i (addr_i ), .user_burst_cnt (user_burst_cnt), .fifo_rdy_i (fifo_not_full ), .data_o (data_o ) ); end endgenerate endmodule